[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 98537e223850 started "build autoconf213.spec" at Tue Jun 11 18:47:25 UTC 2024. [ 0s] [ 0s] Building autoconf213 for project 'Tizen-Base-X' repository 'standard' arch 'armv7l' srcmd5 '259021431be8b5acdb85bd696e6b7a42' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/autoconf213.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/autoconf213.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/28/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/autoconf213.spec build ... [ 3s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/42] preinstalling libmagic-data... [ 4s] [2/42] preinstalling libncurses... [ 4s] [3/42] preinstalling setup... [ 5s] [4/42] preinstalling filesystem... [ 5s] [5/42] preinstalling glibc... [ 5s] [6/42] preinstalling libgcc... [ 18s] [7/42] preinstalling bash... [ 18s] [8/42] preinstalling diffutils... [ 18s] [9/42] preinstalling grep... [ 19s] [10/42] preinstalling libattr... [ 19s] [11/42] preinstalling libblkid... [ 19s] [12/42] preinstalling libbz2... [ 19s] [13/42] preinstalling libcap... [ 19s] [14/42] preinstalling libfreebl3... [ 19s] [15/42] preinstalling liblua... [ 19s] [16/42] preinstalling liblzma... [ 19s] [17/42] preinstalling libpopt... [ 19s] [18/42] preinstalling libreadline... [ 19s] [19/42] preinstalling libsmack... [ 19s] [20/42] preinstalling libsqlite... [ 19s] [21/42] preinstalling libuuid... [ 19s] [22/42] preinstalling libxcrypt... [ 19s] [23/42] preinstalling libzstd1... [ 19s] [24/42] preinstalling nspr... [ 19s] [25/42] preinstalling sed... [ 19s] [26/42] preinstalling zlib... [ 19s] [27/42] preinstalling qemu-accel-x86_64-armv7l... [ 43s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 47s] [29/42] preinstalling coreutils... [ 47s] [30/42] preinstalling libacl... [ 47s] [31/42] preinstalling libelf... [ 47s] [32/42] preinstalling libmount... [ 47s] [33/42] preinstalling smack... [ 47s] [34/42] preinstalling bzip2... [ 47s] [35/42] preinstalling libmagic... [ 48s] [36/42] preinstalling libxml2... [ 48s] [37/42] preinstalling tar... [ 48s] [38/42] preinstalling util-linux... [ 48s] [39/42] preinstalling util-linux-su... [ 48s] [40/42] preinstalling nss... [ 48s] [41/42] preinstalling libsoftokn3... [ 48s] [42/42] preinstalling rpm... [ 49s] running qemu-linux-user-x86_64-cross postinstall script [ 49s] running qemu-accel-x86_64-armv7l postinstall script [ 49s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.1.0/liblto_plugin.so': No such file or directory [ 49s] running setup postinstall script [ 49s] chroot: failed to run command '': No such file or directory [ 49s] initializing rpm db... [ 50s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 50s] breaking dependency libxcrypt-devel -> glibc-devel [ 50s] cycle: libsoftokn3 -> nss [ 50s] breaking dependency nss -> libsoftokn3 [ 50s] done [ 50s] querying package ids... [ 50s] [1/99] cumulate libmagic-data-5.45-1.3 [ 50s] [2/99] cumulate setup-0.9-1.4 [ 50s] [3/99] cumulate filesystem-3.1-1.1 [ 50s] [4/99] cumulate glibc-2.39-1.6 [ 50s] [5/99] cumulate libatomic-14.1.0-1.6 [ 50s] [6/99] cumulate libgcc-14.1.0-1.6 [ 50s] [7/99] cumulate bash-3.2.57-1.1 [ 50s] [8/99] cumulate cpio-2.8-1.1 [ 50s] [9/99] cumulate diffutils-3.10-1.1 [ 50s] [10/99] cumulate findutils-4.3.8-1.4 [ 50s] [11/99] cumulate gdbm-1.8.3-1.6 [ 50s] [12/99] cumulate hostname-3.23-1.1 [ 50s] [13/99] cumulate libattr-2.5.1-1.4 [ 50s] [14/99] cumulate libblkid-2.39.3-1.4 [ 50s] [15/99] cumulate libbz2-1.0.8-1.4 [ 50s] [16/99] cumulate libcap-2.69-1.4 [ 50s] [17/99] cumulate libfreebl3-3.98-1.5 [ 50s] [18/99] cumulate libgfortran-14.1.0-1.6 [ 50s] [19/99] cumulate libgomp-14.1.0-1.6 [ 50s] [20/99] cumulate libitm-14.1.0-1.6 [ 50s] [21/99] cumulate libltdl-2.4.7-1.6 [ 50s] [22/99] cumulate liblua-5.1.5-1.3 [ 50s] [23/99] cumulate liblzma-5.4.5-1.6 [ 50s] [24/99] cumulate libopenssl3-3.0.13-1.6 [ 50s] [25/99] cumulate libpcre-8.45-1.4 [ 50s] [26/99] cumulate libpopt-1.16-1.3 [ 50s] [27/99] cumulate libsmack-1.3.1-1.3 [ 50s] [28/99] cumulate libsmartcols-2.39.3-1.4 [ 50s] [29/99] cumulate libsqlite-3.44.0-1.4 [ 50s] [30/99] cumulate libstdc++-14.1.0-1.6 [ 50s] [31/99] cumulate libuuid-2.39.3-1.4 [ 50s] [32/99] cumulate libxcrypt-4.4.36-1.6 [ 50s] [33/99] cumulate libzstd1-1.5.5-1.4 [ 50s] [34/99] cumulate m4-1.4.19-1.1 [ 50s] [35/99] cumulate net-tools-2.0_20121208git-1.3 [ 50s] [36/99] cumulate nspr-4.35-1.3 [ 50s] [37/99] cumulate patch-2.7.6-1.3 [ 50s] [38/99] cumulate pkg-config-0.29.2-1.4 [ 50s] [39/99] cumulate sed-4.1c-1.3 [ 50s] [40/99] cumulate update-alternatives-1.22.2-2.1 [ 50s] [41/99] cumulate which-2.17-1.1 [ 50s] [42/99] cumulate zlib-1.3-1.5 [ 50s] [43/99] cumulate build-compare-2023.06.18-2.2 [ 50s] [44/99] cumulate libstdc++-devel-14.1.0-1.6 [ 50s] [45/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 50s] [46/99] cumulate cpp-14.1.0-1.6 [ 50s] [47/99] cumulate gcc-c++-14.1.0-1.6 [ 50s] [48/99] cumulate binutils-libs-2.42-1.6 [ 50s] [49/99] cumulate coreutils-6.9-15.3 [ 50s] [50/99] cumulate gawk-3.1.5-2.1 [ 50s] [51/99] cumulate grep-2.5.2-1.3 [ 50s] [52/99] cumulate libacl-2.3.2-1.4 [ 50s] [53/99] cumulate libcc1-14.1.0-1.6 [ 50s] [54/99] cumulate libelf-0.189-1.6 [ 50s] [55/99] cumulate libmount-2.39.3-1.4 [ 50s] [56/99] cumulate libubsan-14.1.0-1.6 [ 50s] [57/99] cumulate make-4.4-1.4 [ 50s] [58/99] cumulate nss-certs-3.98-1.5 [ 50s] [59/99] cumulate smack-1.3.1-1.3 [ 50s] [60/99] cumulate bzip2-1.0.8-1.4 [ 50s] [61/99] cumulate libfdisk-2.39.3-1.4 [ 50s] [62/99] cumulate libmagic-5.45-1.3 [ 50s] [63/99] cumulate libxml2-2.12.5-1.5 [ 50s] [64/99] cumulate xz-5.4.5-1.6 [ 50s] [65/99] cumulate perl-5.38.0-1.4 [ 50s] [66/99] cumulate build-mkbaselibs-20120927-2.1 [ 50s] [67/99] cumulate linux-glibc-devel-6.6-1.5 [ 50s] [68/99] cumulate terminfo-base-full-6.4-1.6 [ 50s] [69/99] cumulate texinfo-7.1-1.5 [ 50s] [70/99] cumulate autoconf-2.71-1.5 [ 50s] [71/99] cumulate file-5.45-1.3 [ 50s] [72/99] cumulate glibc-locale-2.39-1.6 [ 50s] [73/99] cumulate tar-1.17-2.1 [ 50s] [74/99] cumulate binutils-2.42-1.6 [ 50s] [75/99] cumulate gzip-1.3.12-1.3 [ 50s] [76/99] cumulate pam-1.1.6-1.4 [ 50s] [77/99] cumulate tzdata-2023c-1.1 [ 50s] [78/99] cumulate libdw-0.189-1.6 [ 50s] [79/99] cumulate libarchive-3.7.2-1.5 [ 50s] [80/99] cumulate gcc-14.1.0-1.6 [ 50s] [81/99] cumulate makeinfo-7.1-1.5 [ 50s] [82/99] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 50s] [83/99] cumulate automake-1.16.5-1.5 [ 50s] [84/99] cumulate libasm-0.189-1.6 [ 50s] [85/99] cumulate libncurses6-6.4-1.6 [ 50s] [86/99] cumulate build-20120927-2.1 [ 50s] [87/99] cumulate libncurses-6.4-1.6 [ 50s] [88/99] cumulate less-643-1.1 [ 50s] [89/99] cumulate libreadline-5.2-1.5 [ 50s] [90/99] cumulate libtool-2.4.7-1.6 [ 50s] [91/99] cumulate elfutils-0.189-1.6 [ 50s] [92/99] cumulate util-linux-2.39.3-1.4 [ 50s] [93/99] cumulate util-linux-su-2.39.3-1.4 [ 50s] [94/99] cumulate libxcrypt-devel-4.4.36-1.6 [ 50s] [95/99] cumulate nss-3.98-1.5 [ 50s] [96/99] cumulate glibc-devel-2.39-1.6 [ 50s] [97/99] cumulate libsoftokn3-3.98-1.5 [ 50s] [98/99] cumulate rpm-4.14.1.1-1.5 [ 50s] [99/99] cumulate rpm-build-4.14.1.1-1.5 [ 50s] now installing cumulated packages [ 51s] Preparing... ######################################## [ 51s] Updating / installing... [ 51s] setup-0.9-1.4 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 51s] ########################## [ 51s] filesystem-3.1-1.1 ######################################## [ 51s] libmagic-data-5.45-1.3 ######################################## [ 51s] glibc-2.39-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 52s] ######################################## [ 52s] libgcc-14.1.0-1.6 ######################################## [ 52s] bash-3.2.57-1.1 ######################################## [ 52s] zlib-1.3-1.5 ######################################## [ 53s] coreutils-6.9-15.3 ######################################## [ 53s] libstdc++-14.1.0-1.6 ######################################## [ 54s] libbz2-1.0.8-1.4 ######################################## [ 54s] liblzma-5.4.5-1.6 ######################################## [ 58s] libelf-0.189-1.6 ######################################## [ 72s] libdw-0.189-1.6 ######################################## [ 74s] libxcrypt-4.4.36-1.6 ######################################## [ 74s] libmagic-5.45-1.3 ######################################## [ 74s] libblkid-2.39.3-1.4 ######################################## [ 74s] nspr-4.35-1.3 ######################################## [ 75s] pam-1.1.6-1.4 ######################################## [ 75s] libcap-2.69-1.4 ######################################## [ 76s] libfreebl3-3.98-1.5 ######################################## [ 76s] liblua-5.1.5-1.3 ######################################## [ 76s] libpopt-1.16-1.3 ######################################## [ 77s] libuuid-2.39.3-1.4 ######################################## [ 77s] libzstd1-1.5.5-1.4 ######################################## [ 78s] linux-glibc-devel-6.6-1.5 ######################################## [ 78s] terminfo-base-full-6.4-1.6 ######################################## [ 78s] libncurses6-6.4-1.6 ######################################## [ 78s] libreadline-5.2-1.5 ######################################## [ 79s] libfdisk-2.39.3-1.4 ######################################## [ 79s] nss-certs-3.98-1.5 ######################################## [ 79s] libmount-2.39.3-1.4 ######################################## [ 80s] libasm-0.189-1.6 ######################################## [ 80s] libxml2-2.12.5-1.5 ######################################## [ 80s] xz-5.4.5-1.6 ######################################## [ 80s] bzip2-1.0.8-1.4 ######################################## [ 80s] libcc1-14.1.0-1.6 ######################################## [ 80s] libubsan-14.1.0-1.6 ######################################## [ 80s] gzip-1.3.12-1.3 ######################################## [ 81s] binutils-libs-2.42-1.6 ######################################## [ 82s] binutils-2.42-1.6 ######################################## [ 82s] make-4.4-1.4 ######################################## [ 82s] findutils-4.3.8-1.4 ######################################## [ 82s] gdbm-1.8.3-1.6 ######################################## [ 86s] perl-5.38.0-1.4 ######################################## [ 86s] build-mkbaselibs-20120927-2.1 ######################################## [ 87s] texinfo-7.1-1.5 ######################################## [ 87s] libattr-2.5.1-1.4 ######################################## [ 87s] libacl-2.3.2-1.4 ######################################## [ 87s] tar-1.17-2.1 ######################################## [ 87s] libgfortran-14.1.0-1.6 ######################################## [ 88s] libgomp-14.1.0-1.6 ######################################## [ 88s] libitm-14.1.0-1.6 ######################################## [ 88s] libltdl-2.4.7-1.6 ######################################## [ 89s] libopenssl3-3.0.13-1.6 ######################################## [ 89s] libarchive-3.7.2-1.5 ######################################## [ 89s] libpcre-8.45-1.4 ######################################## [ 90s] libsmack-1.3.1-1.3 ######################################## [ 90s] libsmartcols-2.39.3-1.4 ######################################## [ 90s] libsqlite-3.44.0-1.4 ######################################## [ 91s] libsoftokn3-3.98-1.5 ######################################## [ 91s] nss-3.98-1.5 ######################################## [ 92s] rpm-4.14.1.1-1.5 ######################################## [ 92s] m4-1.4.19-1.1 ######################################## [ 92s] autoconf-2.71-1.5 ######################################## [ 93s] automake-1.16.5-1.5 ######################################## [ 93s] patch-2.7.6-1.3 ######################################## [ 93s] pkg-config-0.29.2-1.4 ######################################## [ 93s] sed-4.1c-1.3 ######################################## [ 93s] util-linux-2.39.3-1.4 ######################################## [ 93s] libatomic-14.1.0-1.6 ######################################## [ 94s] libtool-2.4.7-1.6 ######################################## [ 94s] build-20120927-2.1 ######################################## [ 94s] makeinfo-7.1-1.5 ######################################## [ 94s] libncurses-6.4-1.6 ######################################## [ 95s] libstdc++-devel-14.1.0-1.6 ######################################## [ 95s] build-compare-2023.06.18-2.2 ######################################## [ 103s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 106s] gcc-14.1.0-1.6 ######################################## [ 106s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 106s] glibc-devel-2.39-1.6 ######################################## [ 125s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 126s] rpm-build-4.14.1.1-1.5 ######################################## [ 126s] util-linux-su-2.39.3-1.4 ######################################## [ 126s] smack-1.3.1-1.3 ######################################## [ 126s] grep-2.5.2-1.3 ######################################## [ 126s] elfutils-0.189-1.6 ######################################## [ 126s] less-643-1.1 ######################################## [ 126s] file-5.45-1.3 ######################################## [ 126s] glibc-locale-2.39-1.6 ######################################## [ 127s] tzdata-2023c-1.1 ######################################## [ 129s] cpp-14.1.0-1.6 ######################################## [ 130s] gcc-c++-14.1.0-1.6 ######################################## [ 130s] gawk-3.1.5-2.1 ######################################## [ 130s] cpio-2.8-1.1 ######################################## [ 130s] diffutils-3.10-1.1 ######################################## [ 130s] hostname-3.23-1.1 ######################################## [ 130s] net-tools-2.0_20121208git-1.3 ######################################## [ 130s] update-alternatives-1.22.2-2.1 ######################################## [ 130s] which-2.17-1.1 ######################################## [ 131s] now finalizing build dir... [ 132s] ----------------------------------------------------------------- [ 132s] I have the following modifications for autoconf213.spec: [ 132s] 9c9 [ 132s] < Release: 1 [ 132s] --- [ 132s] > Release: 1.1 [ 132s] build target is armv7l-tizen-linux [ 132s] ----------------------------------------------------------------- [ 132s] ----- building autoconf213.spec (user abuild) [ 132s] ----------------------------------------------------------------- [ 132s] ----------------------------------------------------------------- [ 133s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X/standard/259021431be8b5acdb85bd696e6b7a42-autoconf213' /home/abuild/rpmbuild/SOURCES/autoconf213.spec [ 133s] Building target platforms: armv7l-tizen-linux [ 133s] Building for target armv7l-tizen-linux [ 133s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ODQfzK [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + rm -rf autoconf-2.13 [ 133s] + /bin/tar -xof - [ 133s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.13.tar.bz2 [ 133s] + STATUS=0 [ 133s] + '[' 0 -ne 0 ']' [ 133s] + cd autoconf-2.13 [ 133s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 133s] + echo 'Patch #0 (0001-autoconf-2.12-race.patch):' [ 133s] Patch #0 (0001-autoconf-2.12-race.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file autoconf.sh [ 133s] patching file autoheader.sh [ 133s] patching file autoupdate.sh [ 133s] + echo 'Patch #1 (0002-autoconf-2.13-mawk.patch):' [ 133s] Patch #1 (0002-autoconf-2.13-mawk.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file acspecific.m4 [ 133s] patching file autoconf.texi [ 133s] patching file configure [ 133s] + echo 'Patch #2 (0003-autoconf-2.13-notmp.patch):' [ 133s] Patch #2 (0003-autoconf-2.13-notmp.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file autoconf.sh [ 133s] patching file autoupdate.sh [ 133s] + echo 'Patch #3 (0004-autoconf-2.13-c-exit.patch):' [ 133s] Patch #3 (0004-autoconf-2.13-c-exit.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file acgeneral.m4 [ 133s] patching file acspecific.m4 [ 133s] + echo 'Patch #4 (0005-autoconf-2.13-headers.patch):' [ 133s] Patch #4 (0005-autoconf-2.13-headers.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file acspecific.m4 [ 133s] + echo 'Patch #5 (0006-autoconf-2.13-autoscan.patch):' [ 133s] Patch #5 (0006-autoconf-2.13-autoscan.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file autoscan.pl [ 133s] + echo 'Patch #6 (0007-autoconf-2.13-exit.patch):' [ 133s] Patch #6 (0007-autoconf-2.13-exit.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file acgeneral.m4 [ 133s] + echo 'Patch #7 (0008-autoconf-2.13-wait3test.patch):' [ 133s] Patch #7 (0008-autoconf-2.13-wait3test.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file acspecific.m4 [ 133s] + echo 'Patch #8 (0009-autoconf-2.13-make-defs-62361.patch):' [ 133s] Patch #8 (0009-autoconf-2.13-make-defs-62361.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file acgeneral.m4 [ 133s] + echo 'Patch #9 (0010-autoconf-2.13-versioning.patch):' [ 133s] Patch #9 (0010-autoconf-2.13-versioning.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file Makefile.in [ 133s] + echo 'Patch #10 (0011-autoconf213-destdir.patch):' [ 133s] Patch #10 (0011-autoconf213-destdir.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file Makefile.in [ 133s] + echo 'Patch #11 (0012-autoconf213-info.patch):' [ 133s] Patch #11 (0012-autoconf213-info.patch): [ 133s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 133s] patching file Makefile.in [ 133s] patching file autoconf.texi [ 133s] + cp /home/abuild/rpmbuild/SOURCES/autoconf213.manifest . [ 133s] + mv autoconf.texi autoconf213.texi [ 133s] + rm -f autoconf.info [ 133s] + exit 0 [ 133s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TjsNds [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd autoconf-2.13 [ 133s] + ref=/usr/lib/rpm [ 133s] + mints=0 [ 133s] + case $(uname -m) in [ 133s] ++ uname -m [ 133s] + for s in guess sub [ 133s] ++ find -maxdepth 8 -name config.guess [ 133s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 133s] + grep -q config-patches@ ./config.guess [ 133s] + continue [ 133s] + for s in guess sub [ 133s] ++ find -maxdepth 8 -name config.sub [ 133s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 133s] + grep -q config-patches@ ./config.sub [ 133s] + continue [ 133s] + LANG=C [ 133s] + export LANG [ 133s] + unset DISPLAY [ 133s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 133s] + export CFLAGS [ 133s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 133s] + export CXXFLAGS [ 133s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 133s] + export FFLAGS [ 133s] + LDFLAGS= [ 133s] + export LDFLAGS [ 133s] + ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 [ 133s] creating cache ./config.cache [ 133s] checking for gm4... no [ 133s] checking for gnum4... no [ 133s] checking for m4... /bin/m4 [ 133s] checking for gawk... gawk [ 133s] checking for perl... /bin/perl [ 133s] checking for a BSD compatible install... /bin/install -c [ 133s] updating cache ./config.cache [ 133s] creating ./config.status [ 133s] creating Makefile [ 133s] creating testsuite/Makefile [ 133s] + make [ 133s] cd . && \ [ 133s] rm -f configure configure.tmp && \ [ 133s] /bin/m4 autoconf.m4 configure.in > configure.tmp && \ [ 133s] chmod +x configure.tmp && mv configure.tmp configure [ 133s] /bin/sh ./config.status --recheck [ 133s] running /bin/sh ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 --no-create --no-recursion [ 133s] loading cache ./config.cache [ 133s] checking for gm4... (cached) /bin/m4 [ 133s] checking for gawk... (cached) gawk [ 133s] checking for perl... (cached) /bin/perl [ 133s] checking for a BSD compatible install... (cached) /bin/install -c [ 133s] creating ./config.status [ 133s] /bin/sh ./config.status [ 133s] creating Makefile [ 133s] creating testsuite/Makefile [ 133s] rm -f autoconf autoconf.tmp [ 133s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf [ 134s] rm -f autoheader autoheader.tmp [ 134s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader [ 134s] rm -f autoreconf autoreconf.tmp [ 134s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf [ 134s] rm -f autoupdate autoupdate.tmp [ 134s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate [ 134s] rm -f ifnames ifnames.tmp [ 134s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames [ 134s] rm -f autoscan autoscan.tmp [ 134s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan [ 134s] freezing autoconf.m4 [ 134s] freezing autoheader.m4 [ 134s] makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info [ 145s] + exit 0 [ 145s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lpBElV [ 145s] + umask 022 [ 145s] + cd /home/abuild/rpmbuild/BUILD [ 145s] + cd autoconf-2.13 [ 145s] + LANG=C [ 145s] + export LANG [ 145s] + unset DISPLAY [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 145s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 145s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm install [ 145s] /bin/sh ./mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13 [ 145s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr [ 145s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/bin [ 145s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share [ 145s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info [ 146s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/autoconf-2.13 [ 146s] if test -f autoconf213.info; then \ [ 146s] for i in *.info*; do \ [ 146s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/$i; \ [ 146s] done; \ [ 146s] else \ [ 146s] for i in ./*.info*; do \ [ 146s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/`echo $i | sed 's|^./||'`; \ [ 146s] done; \ [ 146s] fi [ 146s] for p in autoconf autoheader autoreconf autoupdate ifnames ; do \ [ 146s] /bin/install -c $p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo $p|sed 's,$,-2.13,; '`; \ [ 146s] done [ 146s] for i in autoconf.m4f autoheader.m4f; do \ [ 146s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 146s] done [ 146s] for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \ [ 146s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 146s] done [ 146s] if test -f autoscan; then \ [ 146s] /bin/install -c autoscan /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo autoscan|sed 's,$,-2.13,; '`; \ [ 146s] for i in acfunctions acheaders acidentifiers acprograms \ [ 146s] acmakevars; do \ [ 146s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 146s] done; \ [ 146s] else :; fi [ 146s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/dir [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.la$' [ 146s] + xargs rm -f -- [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.a$' [ 146s] + xargs rm -f -- [ 146s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/standards.info [ 146s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13-1.1 --unique-debug-src-base autoconf213-2.13-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/autoconf-2.13 [ 146s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debuginfo.manifest [ 146s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debugsource.manifest [ 146s] + /usr/lib/rpm/check-buildroot [ 146s] + /usr/lib/rpm//brp-compress [ 147s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 147s] + /usr/lib/rpm/brp-python-hardlink [ 147s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 147s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/autoconf-2.13/isu.list [ 147s] ~/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm ~/rpmbuild/BUILD/autoconf-2.13 [ 147s] ~/rpmbuild/BUILD/autoconf-2.13 [ 147s] Processing files: autoconf213-2.13-1.1.noarch [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.cqUWc7 [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd autoconf-2.13 [ 147s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + export LC_ALL=C [ 147s] + LC_ALL=C [ 147s] + export DOCDIR [ 147s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 147s] + exit 0 [ 147s] Provides: autoconf213 = 2.13-1.1 [ 147s] Requires(interp): /bin/sh /bin/sh [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Requires(post): /bin/sh [ 147s] Requires(postun): /bin/sh [ 147s] Requires: /bin/perl /bin/sh [ 147s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 147s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-1.1.src.rpm [ 147s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.1.noarch.rpm [ 147s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.BR3Hgb [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd autoconf-2.13 [ 147s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 147s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 147s] + exit 0 [ 147s] ... checking for files with abuild user/group [ 147s] ... creating baselibs [ 148s] [ 148s] 98537e223850 finished "build autoconf213.spec" at Tue Jun 11 18:49:53 UTC 2024. [ 148s] Retried build at Tue Jul 2 01:52:12 2024 returned same result, skipped Retried build at Wed Jul 3 03:55:11 2024 returned same result, skipped Retried build at Thu Jul 4 02:52:20 2024 returned same result, skipped Retried build at Thu Jul 11 02:11:44 2024 returned same result, skipped Retried build at Thu Jul 11 11:18:15 2024 returned same result, skipped Retried build at Fri Jul 19 11:01:38 2024 returned same result, skipped Retried build at Wed Jul 24 05:59:57 2024 returned same result, skipped Retried build at Thu Jul 25 09:18:58 2024 returned same result, skipped