[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 98537e223850 started "build python3-ply.spec" at Tue Jun 11 19:06:40 UTC 2024. [ 0s] [ 0s] Building python3-ply for project 'Tizen-Base-X' repository 'standard' arch 'armv7l' srcmd5 '5867fa1722d1802c82e3ee69978a31ca' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-ply.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-ply.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/15/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-ply.spec build ... [ 2s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/42] preinstalling libmagic-data... [ 2s] [2/42] preinstalling libncurses... [ 3s] [3/42] preinstalling setup... [ 3s] [4/42] preinstalling filesystem... [ 3s] [5/42] preinstalling glibc... [ 3s] [6/42] preinstalling libgcc... [ 3s] [7/42] preinstalling bash... [ 3s] [8/42] preinstalling diffutils... [ 4s] [9/42] preinstalling grep... [ 4s] [10/42] preinstalling libattr... [ 4s] [11/42] preinstalling libblkid... [ 4s] [12/42] preinstalling libbz2... [ 4s] [13/42] preinstalling libcap... [ 4s] [14/42] preinstalling libfreebl3... [ 4s] [15/42] preinstalling liblua... [ 4s] [16/42] preinstalling liblzma... [ 4s] [17/42] preinstalling libpopt... [ 4s] [18/42] preinstalling libreadline... [ 4s] [19/42] preinstalling libsmack... [ 4s] [20/42] preinstalling libsqlite... [ 5s] [21/42] preinstalling libuuid... [ 5s] [22/42] preinstalling libxcrypt... [ 5s] [23/42] preinstalling libzstd1... [ 5s] [24/42] preinstalling nspr... [ 5s] [25/42] preinstalling sed... [ 5s] [26/42] preinstalling zlib... [ 5s] [27/42] preinstalling qemu-accel-x86_64-armv7l... [ 19s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 23s] [29/42] preinstalling coreutils... [ 23s] [30/42] preinstalling libacl... [ 23s] [31/42] preinstalling libelf... [ 23s] [32/42] preinstalling libmount... [ 24s] [33/42] preinstalling smack... [ 24s] [34/42] preinstalling bzip2... [ 24s] [35/42] preinstalling libmagic... [ 24s] [36/42] preinstalling libxml2... [ 24s] [37/42] preinstalling tar... [ 24s] [38/42] preinstalling util-linux... [ 24s] [39/42] preinstalling util-linux-su... [ 24s] [40/42] preinstalling nss... [ 24s] [41/42] preinstalling libsoftokn3... [ 24s] [42/42] preinstalling rpm... [ 25s] running qemu-linux-user-x86_64-cross postinstall script [ 25s] running qemu-accel-x86_64-armv7l postinstall script [ 25s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.1.0/liblto_plugin.so': No such file or directory [ 25s] running setup postinstall script [ 25s] chroot: failed to run command '': No such file or directory [ 25s] initializing rpm db... [ 26s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 26s] breaking dependency libxcrypt-devel -> glibc-devel [ 26s] cycle: libsoftokn3 -> nss [ 26s] breaking dependency nss -> libsoftokn3 [ 26s] done [ 26s] querying package ids... [ 26s] [1/104] cumulate libmagic-data-5.45-1.3 [ 26s] [2/104] cumulate setup-0.9-1.1 [ 26s] [3/104] cumulate filesystem-3.1-1.1 [ 26s] [4/104] cumulate glibc-2.39-1.6 [ 26s] [5/104] cumulate libatomic-14.1.0-1.6 [ 26s] [6/104] cumulate libgcc-14.1.0-1.6 [ 26s] [7/104] cumulate bash-3.2.57-1.1 [ 26s] [8/104] cumulate cpio-2.8-1.1 [ 26s] [9/104] cumulate diffutils-3.10-1.1 [ 26s] [10/104] cumulate fdupes-2.2.1-1.4 [ 26s] [11/104] cumulate findutils-4.3.8-1.4 [ 26s] [12/104] cumulate gdbm-1.8.3-1.6 [ 26s] [13/104] cumulate hostname-3.23-1.1 [ 26s] [14/104] cumulate libattr-2.5.1-1.4 [ 26s] [15/104] cumulate libblkid-2.39.3-1.4 [ 26s] [16/104] cumulate libbz2-1.0.8-1.4 [ 26s] [17/104] cumulate libcap-2.69-1.4 [ 26s] [18/104] cumulate libexpat-2.6.2-1.5 [ 26s] [19/104] cumulate libffi-3.4.2-1.5 [ 26s] [20/104] cumulate libfreebl3-3.98-1.5 [ 26s] [21/104] cumulate libgfortran-14.1.0-1.6 [ 26s] [22/104] cumulate libgomp-14.1.0-1.6 [ 26s] [23/104] cumulate libitm-14.1.0-1.6 [ 26s] [24/104] cumulate libltdl-2.4.7-1.6 [ 26s] [25/104] cumulate liblua-5.1.5-1.3 [ 26s] [26/104] cumulate liblzma-5.4.5-1.6 [ 26s] [27/104] cumulate libopenssl3-3.0.13-1.6 [ 26s] [28/104] cumulate libpcre-8.45-1.4 [ 26s] [29/104] cumulate libpopt-1.16-1.3 [ 26s] [30/104] cumulate libpython3_121_0-3.12.0-1.5 [ 26s] [31/104] cumulate libsmack-1.3.1-1.3 [ 26s] [32/104] cumulate libsmartcols-2.39.3-1.4 [ 26s] [33/104] cumulate libsqlite-3.44.0-1.4 [ 26s] [34/104] cumulate libstdc++-14.1.0-1.6 [ 26s] [35/104] cumulate libuuid-2.39.3-1.4 [ 26s] [36/104] cumulate libxcrypt-4.4.36-1.6 [ 26s] [37/104] cumulate libzstd1-1.5.5-1.4 [ 26s] [38/104] cumulate m4-1.4.19-1.1 [ 26s] [39/104] cumulate net-tools-2.0_20121208git-1.3 [ 26s] [40/104] cumulate nspr-4.35-1.3 [ 26s] [41/104] cumulate patch-2.7.6-1.3 [ 26s] [42/104] cumulate pkg-config-0.29.2-1.4 [ 26s] [43/104] cumulate sed-4.1c-1.3 [ 26s] [44/104] cumulate update-alternatives-1.22.2-1.1 [ 26s] [45/104] cumulate which-2.17-1.1 [ 26s] [46/104] cumulate zlib-1.3-1.5 [ 26s] [47/104] cumulate build-compare-2023.06.18-1.1 [ 26s] [48/104] cumulate libstdc++-devel-14.1.0-1.6 [ 26s] [49/104] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 26s] [50/104] cumulate cpp-14.1.0-1.6 [ 26s] [51/104] cumulate gcc-c++-14.1.0-1.6 [ 26s] [52/104] cumulate binutils-libs-2.42-1.6 [ 26s] [53/104] cumulate coreutils-6.9-14.1 [ 26s] [54/104] cumulate gawk-3.1.5-1.1 [ 26s] [55/104] cumulate grep-2.5.2-1.3 [ 26s] [56/104] cumulate libacl-2.3.2-1.4 [ 26s] [57/104] cumulate libcc1-14.1.0-1.6 [ 26s] [58/104] cumulate libelf-0.189-1.6 [ 26s] [59/104] cumulate libmount-2.39.3-1.4 [ 26s] [60/104] cumulate libubsan-14.1.0-1.6 [ 26s] [61/104] cumulate make-4.4-1.4 [ 26s] [62/104] cumulate nss-certs-3.98-1.5 [ 26s] [63/104] cumulate smack-1.3.1-1.3 [ 26s] [64/104] cumulate bzip2-1.0.8-1.4 [ 26s] [65/104] cumulate libfdisk-2.39.3-1.4 [ 26s] [66/104] cumulate libmagic-5.45-1.3 [ 26s] [67/104] cumulate libxml2-2.12.5-1.5 [ 26s] [68/104] cumulate xz-5.4.5-1.6 [ 26s] [69/104] cumulate perl-5.38.0-1.4 [ 26s] [70/104] cumulate build-mkbaselibs-20120927-1.1 [ 26s] [71/104] cumulate linux-glibc-devel-6.6-1.5 [ 26s] [72/104] cumulate terminfo-base-full-6.4-1.6 [ 26s] [73/104] cumulate autoconf-2.71-1.5 [ 26s] [74/104] cumulate file-5.45-1.3 [ 26s] [75/104] cumulate glibc-locale-2.39-1.6 [ 26s] [76/104] cumulate tar-1.17-1.1 [ 26s] [77/104] cumulate binutils-2.42-1.6 [ 26s] [78/104] cumulate gzip-1.3.12-1.3 [ 26s] [79/104] cumulate pam-1.1.6-1.4 [ 26s] [80/104] cumulate tzdata-2023c-1.1 [ 26s] [81/104] cumulate libdw-0.189-1.6 [ 26s] [82/104] cumulate libarchive-3.7.2-1.5 [ 26s] [83/104] cumulate gcc-14.1.0-1.6 [ 26s] [84/104] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 26s] [85/104] cumulate automake-1.16.5-1.5 [ 26s] [86/104] cumulate libasm-0.189-1.6 [ 26s] [87/104] cumulate libncurses6-6.4-1.6 [ 26s] [88/104] cumulate build-20120927-1.1 [ 26s] [89/104] cumulate libncurses-6.4-1.6 [ 26s] [90/104] cumulate less-643-1.1 [ 26s] [91/104] cumulate libreadline-5.2-1.5 [ 26s] [92/104] cumulate libtool-2.4.7-1.6 [ 26s] [93/104] cumulate elfutils-0.189-1.6 [ 26s] [94/104] cumulate python3-base-3.12.0-1.5 [ 26s] [95/104] cumulate util-linux-2.39.3-1.4 [ 26s] [96/104] cumulate python3-3.12.0-1.1 [ 26s] [97/104] cumulate util-linux-su-2.39.3-1.4 [ 26s] [98/104] cumulate python3-setuptools-69.0.2-1.1 [ 26s] [99/104] cumulate libxcrypt-devel-4.4.36-1.6 [ 26s] [100/104] cumulate nss-3.98-1.5 [ 26s] [101/104] cumulate glibc-devel-2.39-1.6 [ 26s] [102/104] cumulate libsoftokn3-3.98-1.5 [ 26s] [103/104] cumulate rpm-4.14.1.1-1.5 [ 26s] [104/104] cumulate rpm-build-4.14.1.1-1.5 [ 26s] now installing cumulated packages [ 28s] Preparing... ######################################## [ 28s] Updating / installing... [ 28s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 28s] ########################## [ 28s] filesystem-3.1-1.1 ######################################## [ 28s] libmagic-data-5.45-1.3 ######################################## [ 28s] glibc-2.39-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 29s] ######################################## [ 30s] libgcc-14.1.0-1.6 ######################################## [ 30s] bash-3.2.57-1.1 ######################################## [ 30s] zlib-1.3-1.5 ######################################## [ 32s] coreutils-6.9-14.1 ######################################## [ 32s] libbz2-1.0.8-1.4 ######################################## [ 32s] liblzma-5.4.5-1.6 ######################################## [ 33s] libstdc++-14.1.0-1.6 ######################################## [ 33s] libelf-0.189-1.6 ######################################## [ 33s] libxcrypt-4.4.36-1.6 ######################################## [ 34s] libdw-0.189-1.6 ######################################## [ 34s] libmagic-5.45-1.3 ######################################## [ 34s] libblkid-2.39.3-1.4 ######################################## [ 34s] nspr-4.35-1.3 ######################################## [ 35s] pam-1.1.6-1.4 ######################################## [ 35s] gdbm-1.8.3-1.6 ######################################## [ 41s] perl-5.38.0-1.4 ######################################## [ 41s] libcap-2.69-1.4 ######################################## [ 42s] libfreebl3-3.98-1.5 ######################################## [ 42s] liblua-5.1.5-1.3 ######################################## [ 43s] libopenssl3-3.0.13-1.6 ######################################## [ 43s] libpopt-1.16-1.3 ######################################## [ 43s] libsqlite-3.44.0-1.4 ######################################## [ 44s] libuuid-2.39.3-1.4 ######################################## [ 44s] libzstd1-1.5.5-1.4 ######################################## [ 44s] build-mkbaselibs-20120927-1.1 ######################################## [ 45s] linux-glibc-devel-6.6-1.5 ######################################## [ 45s] terminfo-base-full-6.4-1.6 ######################################## [ 45s] libncurses6-6.4-1.6 ######################################## [ 45s] libreadline-5.2-1.5 ######################################## [ 46s] libfdisk-2.39.3-1.4 ######################################## [ 46s] nss-certs-3.98-1.5 ######################################## [ 46s] libsoftokn3-3.98-1.5 ######################################## [ 46s] nss-3.98-1.5 ######################################## [ 47s] libmount-2.39.3-1.4 ######################################## [ 47s] libasm-0.189-1.6 ######################################## [ 47s] libcc1-14.1.0-1.6 ######################################## [ 47s] libubsan-14.1.0-1.6 ######################################## [ 48s] libxml2-2.12.5-1.5 ######################################## [ 48s] xz-5.4.5-1.6 ######################################## [ 48s] bzip2-1.0.8-1.4 ######################################## [ 48s] gzip-1.3.12-1.3 ######################################## [ 48s] binutils-libs-2.42-1.6 ######################################## [ 49s] binutils-2.42-1.6 ######################################## [ 49s] make-4.4-1.4 ######################################## [ 49s] findutils-4.3.8-1.4 ######################################## [ 49s] libattr-2.5.1-1.4 ######################################## [ 50s] libacl-2.3.2-1.4 ######################################## [ 50s] tar-1.17-1.1 ######################################## [ 50s] libarchive-3.7.2-1.5 ######################################## [ 52s] rpm-4.14.1.1-1.5 ######################################## [ 52s] libexpat-2.6.2-1.5 ######################################## [ 53s] libffi-3.4.2-1.5 ######################################## [ 53s] libgfortran-14.1.0-1.6 ######################################## [ 54s] libgomp-14.1.0-1.6 ######################################## [ 54s] libitm-14.1.0-1.6 ######################################## [ 54s] libltdl-2.4.7-1.6 ######################################## [ 54s] libpcre-8.45-1.4 ######################################## [ 55s] libpython3_121_0-3.12.0-1.5 ######################################## [ 56s] python3-base-3.12.0-1.5 ######################################## [ 56s] python3-3.12.0-1.1 ######################################## [ 56s] libsmack-1.3.1-1.3 ######################################## [ 56s] libsmartcols-2.39.3-1.4 ######################################## [ 56s] m4-1.4.19-1.1 ######################################## [ 57s] autoconf-2.71-1.5 ######################################## [ 57s] automake-1.16.5-1.5 ######################################## [ 57s] patch-2.7.6-1.3 ######################################## [ 57s] pkg-config-0.29.2-1.4 ######################################## [ 57s] sed-4.1c-1.3 ######################################## [ 57s] util-linux-2.39.3-1.4 ######################################## [ 57s] libatomic-14.1.0-1.6 ######################################## [ 58s] libtool-2.4.7-1.6 ######################################## [ 58s] python3-setuptools-69.0.2-1.1 ######################################## [ 58s] build-20120927-1.1 ######################################## [ 58s] libncurses-6.4-1.6 ######################################## [ 58s] libstdc++-devel-14.1.0-1.6 ######################################## [ 58s] build-compare-2023.06.18-1.1 ######################################## [ 69s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 74s] gcc-14.1.0-1.6 ######################################## [ 74s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 74s] glibc-devel-2.39-1.6 ######################################## [ 98s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 98s] rpm-build-4.14.1.1-1.5 ######################################## [ 98s] util-linux-su-2.39.3-1.4 ######################################## [ 99s] smack-1.3.1-1.3 ######################################## [ 99s] grep-2.5.2-1.3 ######################################## [ 99s] elfutils-0.189-1.6 ######################################## [ 99s] less-643-1.1 ######################################## [ 99s] file-5.45-1.3 ######################################## [ 99s] glibc-locale-2.39-1.6 ######################################## [ 99s] tzdata-2023c-1.1 ######################################## [ 101s] cpp-14.1.0-1.6 ######################################## [ 102s] gcc-c++-14.1.0-1.6 ######################################## [ 102s] gawk-3.1.5-1.1 ######################################## [ 102s] cpio-2.8-1.1 ######################################## [ 102s] diffutils-3.10-1.1 ######################################## [ 102s] fdupes-2.2.1-1.4 ######################################## [ 102s] hostname-3.23-1.1 ######################################## [ 102s] net-tools-2.0_20121208git-1.3 ######################################## [ 102s] update-alternatives-1.22.2-1.1 ######################################## [ 102s] which-2.17-1.1 ######################################## [ 103s] now finalizing build dir... [ 104s] ----------------------------------------------------------------- [ 104s] I have the following modifications for python3-ply.spec: [ 104s] 4c4 [ 104s] < Release: 0 [ 104s] --- [ 104s] > Release: 1.1 [ 104s] build target is armv7l-tizen-linux [ 104s] ----------------------------------------------------------------- [ 104s] ----- building python3-ply.spec (user abuild) [ 104s] ----------------------------------------------------------------- [ 104s] ----------------------------------------------------------------- [ 105s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X/standard/5867fa1722d1802c82e3ee69978a31ca-python3-ply' /home/abuild/rpmbuild/SOURCES/python3-ply.spec [ 105s] Building target platforms: armv7l-tizen-linux [ 105s] Building for target armv7l-tizen-linux [ 105s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GNzDGl [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + rm -rf ply-3.11 [ 105s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ply-3.11.tar.gz [ 105s] + /bin/tar -xof - [ 105s] + STATUS=0 [ 105s] + '[' 0 -ne 0 ']' [ 105s] + cd ply-3.11 [ 105s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 105s] + echo 'Patch #0 (0001-Add-packaging-files.patch):' [ 105s] Patch #0 (0001-Add-packaging-files.patch): [ 105s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 105s] patching file LICENSE [ 105s] + cp /home/abuild/rpmbuild/SOURCES/python3-ply.manifest . [ 105s] + chmod -x test/testlex.py [ 105s] + find example -type f -name '*.py' -exec sed -i 's|#!/usr/bin/env python3||' '{}' + [ 105s] + _target= [ 105s] + _symlinks=0 [ 105s] + _files=() [ 105s] + fdupes -q -n -r example [ 105s] + read _file [ 105s] + exit 0 [ 105s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.NqeIK6 [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd ply-3.11 [ 105s] + ref=/usr/lib/rpm [ 105s] + mints=0 [ 105s] + case $(uname -m) in [ 105s] ++ uname -m [ 105s] + for s in guess sub [ 105s] ++ find -maxdepth 8 -name config.guess [ 105s] + for s in guess sub [ 105s] ++ find -maxdepth 8 -name config.sub [ 105s] + LANG=C [ 105s] + export LANG [ 105s] + unset DISPLAY [ 105s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 105s] + export CFLAGS [ 105s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 105s] + export CXXFLAGS [ 105s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 105s] + export FFLAGS [ 105s] + LDFLAGS= [ 105s] + export LDFLAGS [ 105s] + /usr/bin/python3 setup.py build [ 106s] /usr/lib/python3.12/site-packages/setuptools/dist.py:472: SetuptoolsDeprecationWarning: Invalid dash-separated options [ 106s] !! [ 106s] [ 106s] ******************************************************************************** [ 106s] Usage of dash-separated 'description-file' will not be supported in future [ 106s] versions. Please use the underscore name 'description_file' instead. [ 106s] [ 106s] By 2024-Sep-26, you need to update your project and remove deprecated calls [ 106s] or your builds will no longer be supported. [ 106s] [ 106s] See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. [ 106s] ******************************************************************************** [ 106s] [ 106s] !! [ 106s] opt = self.warn_dash_deprecation(opt, section) [ 106s] running build [ 106s] running build_py [ 106s] creating build [ 106s] creating build/lib [ 106s] creating build/lib/ply [ 106s] copying ply/yacc.py -> build/lib/ply [ 106s] copying ply/__init__.py -> build/lib/ply [ 106s] copying ply/lex.py -> build/lib/ply [ 106s] copying ply/cpp.py -> build/lib/ply [ 106s] copying ply/ctokens.py -> build/lib/ply [ 106s] copying ply/ygen.py -> build/lib/ply [ 106s] + exit 0 [ 106s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aemcNK [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd ply-3.11 [ 106s] + LANG=C [ 106s] + export LANG [ 106s] + unset DISPLAY [ 106s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm [ 106s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm [ 106s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm [ 108s] /usr/lib/python3.12/site-packages/setuptools/dist.py:472: SetuptoolsDeprecationWarning: Invalid dash-separated options [ 108s] !! [ 108s] [ 108s] ******************************************************************************** [ 108s] Usage of dash-separated 'description-file' will not be supported in future [ 108s] versions. Please use the underscore name 'description_file' instead. [ 108s] [ 108s] By 2024-Sep-26, you need to update your project and remove deprecated calls [ 108s] or your builds will no longer be supported. [ 108s] [ 108s] See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. [ 108s] ******************************************************************************** [ 108s] [ 108s] !! [ 108s] opt = self.warn_dash_deprecation(opt, section) [ 108s] running install [ 108s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 108s] !! [ 108s] [ 108s] ******************************************************************************** [ 108s] Please avoid running ``setup.py`` directly. [ 108s] Instead, use pypa/build, pypa/installer or other [ 108s] standards-based tools. [ 108s] [ 108s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 108s] ******************************************************************************** [ 108s] [ 108s] !! [ 108s] self.initialize_options() [ 108s] running build [ 108s] running build_py [ 108s] running install_lib [ 108s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr [ 108s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib [ 108s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12 [ 108s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages [ 108s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] copying build/lib/ply/yacc.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] copying build/lib/ply/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] copying build/lib/ply/lex.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] copying build/lib/ply/cpp.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] copying build/lib/ply/ctokens.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] copying build/lib/ply/ygen.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply [ 108s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply/yacc.py to yacc.cpython-312.pyc [ 109s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply/__init__.py to __init__.cpython-312.pyc [ 109s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply/lex.py to lex.cpython-312.pyc [ 109s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply/cpp.py to cpp.cpython-312.pyc [ 109s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply/ctokens.py to ctokens.cpython-312.pyc [ 109s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply/ygen.py to ygen.cpython-312.pyc [ 109s] running install_egg_info [ 109s] running egg_info [ 109s] writing ply.egg-info/PKG-INFO [ 109s] writing dependency_links to ply.egg-info/dependency_links.txt [ 109s] writing top-level names to ply.egg-info/top_level.txt [ 109s] reading manifest file 'ply.egg-info/SOURCES.txt' [ 109s] reading manifest template 'MANIFEST.in' [ 109s] warning: no previously-included files matching '*.pyc' found anywhere in distribution [ 109s] adding license file 'LICENSE' [ 109s] writing manifest file 'ply.egg-info/SOURCES.txt' [ 109s] Copying ply.egg-info to /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages/ply-3.11-py3.12.egg-info [ 109s] running install_scripts [ 110s] + _target= [ 110s] + _symlinks=0 [ 110s] + _files=() [ 110s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/lib/python3.12/site-packages [ 110s] + read _file [ 110s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.11-1.1 --unique-debug-src-base python3-ply-3.11-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ply-3.11 [ 110s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python3-ply-debuginfo.manifest [ 110s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python3-ply-debugsource.manifest [ 110s] + /usr/lib/rpm/check-buildroot [ 110s] + /usr/lib/rpm//brp-compress [ 110s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 111s] + /usr/lib/rpm/brp-python-hardlink [ 112s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm [ 112s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ply-3.11/isu.list [ 112s] ~/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm ~/rpmbuild/BUILD/ply-3.11 [ 112s] ~/rpmbuild/BUILD/ply-3.11 [ 112s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.hFXrd0 [ 112s] Processing files: python3-ply-3.11-1.1.noarch [ 112s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 112s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 112s] [ 112s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.F5N2op [ 112s] + umask 022 [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + cd ply-3.11 [ 112s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/share/licenses/python3-ply [ 112s] + export LC_ALL=C [ 112s] + LC_ALL=C [ 112s] + export LICENSEDIR [ 112s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/share/licenses/python3-ply [ 112s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm/usr/share/licenses/python3-ply [ 112s] + exit 0 [ 112s] Provides: python3-ply = 3.11-1.1 [ 112s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 112s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm [ 112s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-ply-3.11-1.1.src.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-ply-3.11-1.1.noarch.rpm [ 112s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Ruh2Sn [ 112s] + umask 022 [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + cd ply-3.11 [ 112s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.arm [ 112s] + exit 0 [ 112s] ... checking for files with abuild user/group [ 112s] ... creating baselibs [ 113s] [ 113s] 98537e223850 finished "build python3-ply.spec" at Tue Jun 11 19:08:33 UTC 2024. [ 113s] Retried build at Thu Jun 13 04:21:30 2024 returned same result, skipped Retried build at Tue Jul 2 02:39:48 2024 returned same result, skipped Retried build at Wed Jul 3 04:38:38 2024 returned same result, skipped Retried build at Thu Jul 4 03:24:12 2024 returned same result, skipped Retried build at Thu Jul 11 03:00:13 2024 returned same result, skipped Retried build at Thu Jul 11 11:46:48 2024 returned same result, skipped Retried build at Fri Jul 19 11:51:44 2024 returned same result, skipped Retried build at Wed Jul 24 06:32:42 2024 returned same result, skipped Retried build at Thu Jul 25 09:41:48 2024 returned same result, skipped