[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] 8135aa349310 started "build python3-pyproject_hooks.spec" at Thu May 7 02:28:11 UTC 2026. [ 1s] [ 1s] Building python3-pyproject_hooks for project 'Tizen-Base-X' repository 'standard' arch 'armv7l' srcmd5 'a86b6ffd41810b3f2636a8f4a096a6a2' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-pyproject_hooks.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-pyproject_hooks.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/15/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-pyproject_hooks.spec build ... [ 11s] registering binfmt handlers for cross build [ 11s] cycle: nss -> libsoftokn3 [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] [1/43] preinstalling libmagic-data... [ 12s] [2/43] preinstalling libncurses... [ 12s] [3/43] preinstalling setup... [ 12s] [4/43] preinstalling filesystem... [ 12s] [5/43] preinstalling glibc... [ 12s] [6/43] preinstalling libgcc... [ 12s] [7/43] preinstalling bash... [ 12s] [8/43] preinstalling diffutils... [ 12s] [9/43] preinstalling grep... [ 12s] [10/43] preinstalling libattr... [ 12s] [11/43] preinstalling libblkid... [ 13s] [12/43] preinstalling libbz2... [ 13s] [13/43] preinstalling libcap... [ 13s] [14/43] preinstalling libfreebl3... [ 13s] [15/43] preinstalling liblua... [ 13s] [16/43] preinstalling liblzma... [ 13s] [17/43] preinstalling libopenssl3... [ 13s] [18/43] preinstalling libpopt... [ 13s] [19/43] preinstalling libreadline... [ 13s] [20/43] preinstalling libsmack... [ 13s] [21/43] preinstalling libsqlite... [ 13s] [22/43] preinstalling libuuid... [ 13s] [23/43] preinstalling libxcrypt... [ 13s] [24/43] preinstalling libxml2... [ 13s] [25/43] preinstalling libzstd1... [ 13s] [26/43] preinstalling nspr... [ 13s] [27/43] preinstalling sed... [ 14s] [28/43] preinstalling zlib... [ 14s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 27s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 36s] [31/43] preinstalling coreutils... [ 36s] [32/43] preinstalling libacl... [ 36s] [33/43] preinstalling libelf... [ 36s] [34/43] preinstalling libmount... [ 37s] [35/43] preinstalling smack... [ 37s] [36/43] preinstalling bzip2... [ 37s] [37/43] preinstalling libmagic... [ 37s] [38/43] preinstalling tar... [ 37s] [39/43] preinstalling util-linux... [ 37s] [40/43] preinstalling rpm... [ 38s] [41/43] preinstalling util-linux-su... [ 38s] [42/43] preinstalling nss... [ 38s] [43/43] preinstalling libsoftokn3... [ 38s] running qemu-linux-user-x86_64-cross postinstall script [ 39s] running qemu-accel-x86_64-armv7l postinstall script [ 39s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 39s] running setup postinstall script [ 39s] chroot: failed to run command '': No such file or directory [ 39s] initializing rpm db... [ 39s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 39s] breaking dependency libxcrypt-devel -> glibc-devel [ 39s] cycle: libsoftokn3 -> nss [ 39s] breaking dependency nss -> libsoftokn3 [ 39s] done [ 39s] querying package ids... [ 40s] [1/111] cumulate libmagic-data-5.46-1.40 [ 40s] [2/111] cumulate python3-flit_core-3.12.0-1.1 [ 40s] [3/111] cumulate python3-pyparsing-3.3.1-1.9 [ 40s] [4/111] cumulate python3-six-1.17.0-1.1 [ 40s] [5/111] cumulate setup-0.9-1.20 [ 40s] [6/111] cumulate filesystem-3.1-3.1 [ 40s] [7/111] cumulate python3-packaging-25.0-1.12 [ 40s] [8/111] cumulate glibc-2.40-7.9 [ 40s] [9/111] cumulate libatomic-14.2.0-3.34 [ 40s] [10/111] cumulate libgcc-14.2.0-3.34 [ 40s] [11/111] cumulate bash-3.2.57-1.2 [ 40s] [12/111] cumulate cpio-2.8-2.1 [ 40s] [13/111] cumulate diffutils-3.10-1.3 [ 40s] [14/111] cumulate findutils-4.3.8-1.45 [ 40s] [15/111] cumulate gdbm-1.8.3-1.58 [ 40s] [16/111] cumulate hostname-3.23-1.2 [ 40s] [17/111] cumulate libattr-2.5.1-1.48 [ 40s] [18/111] cumulate libblkid-2.41.2-1.35 [ 40s] [19/111] cumulate libbz2-1.0.8-2.25 [ 40s] [20/111] cumulate libcap-2.73-2.23 [ 40s] [21/111] cumulate libexpat-2.7.3-1.52 [ 40s] [22/111] cumulate libffi-3.4.7-1.57 [ 40s] [23/111] cumulate libfreebl3-3.109-1.29 [ 40s] [24/111] cumulate libgfortran-14.2.0-3.34 [ 40s] [25/111] cumulate libgomp-14.2.0-3.34 [ 40s] [26/111] cumulate libitm-14.2.0-3.34 [ 40s] [27/111] cumulate libltdl-2.5.4-2.26 [ 40s] [28/111] cumulate liblua-5.1.5-1.42 [ 40s] [29/111] cumulate liblzma-5.8.1-4.20 [ 40s] [30/111] cumulate libopenssl3-3.0.18-1.48 [ 40s] [31/111] cumulate libpcre-8.45-1.45 [ 40s] [32/111] cumulate libpopt-1.16-1.41 [ 40s] [33/111] cumulate libpython3_141_0-3.14.2-4.3 [ 40s] [34/111] cumulate libsmack-1.3.1-1.41 [ 40s] [35/111] cumulate libsmartcols-2.41.2-1.35 [ 40s] [36/111] cumulate libsqlite-3.51.0-1.38 [ 40s] [37/111] cumulate libstdc++-14.2.0-3.34 [ 40s] [38/111] cumulate libuuid-2.41.2-1.35 [ 40s] [39/111] cumulate libxcrypt-4.4.36-1.58 [ 40s] [40/111] cumulate libxml2-2.15.1-1.11 [ 40s] [41/111] cumulate libzstd1-1.5.7-1.34 [ 40s] [42/111] cumulate m4-1.4.20-1.2 [ 40s] [43/111] cumulate net-tools-2.0_20121208git-1.40 [ 40s] [44/111] cumulate nspr-4.36-1.27 [ 40s] [45/111] cumulate patch-2.8-1.29 [ 40s] [46/111] cumulate pkg-config-0.29.2-2.25 [ 40s] [47/111] cumulate sed-4.1c-4.10 [ 40s] [48/111] cumulate update-alternatives-1.22.21-1.2 [ 40s] [49/111] cumulate which-2.17-2.1 [ 40s] [50/111] cumulate zlib-1.3.1-1.57 [ 40s] [51/111] cumulate build-compare-2023.06.18-1.22 [ 40s] [52/111] cumulate hal-rootstrap-checker-1.0.0-6.1 [ 40s] [53/111] cumulate libstdc++-devel-14.2.0-3.34 [ 40s] [54/111] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-4.6 [ 40s] [55/111] cumulate cpp-14.2.0-3.34 [ 40s] [56/111] cumulate gcc-c++-14.2.0-3.34 [ 40s] [57/111] cumulate binutils-libs-2.43-1.58 [ 40s] [58/111] cumulate coreutils-6.9-16.1 [ 40s] [59/111] cumulate gawk-3.1.5-2.1 [ 40s] [60/111] cumulate grep-2.5.2-2.22 [ 40s] [61/111] cumulate libacl-2.3.2-1.45 [ 40s] [62/111] cumulate libcc1-14.2.0-3.34 [ 40s] [63/111] cumulate libelf-0.189-1.56 [ 40s] [64/111] cumulate liblastlog2-2.41.2-1.35 [ 40s] [65/111] cumulate libmount-2.41.2-1.35 [ 40s] [66/111] cumulate make-4.4.1-1.45 [ 40s] [67/111] cumulate nss-certs-3.109-1.29 [ 40s] [68/111] cumulate smack-1.3.1-1.41 [ 40s] [69/111] cumulate bzip2-1.0.8-2.25 [ 40s] [70/111] cumulate libfdisk-2.41.2-1.35 [ 40s] [71/111] cumulate libmagic-5.46-1.40 [ 40s] [72/111] cumulate xz-5.8.1-4.20 [ 40s] [73/111] cumulate perl-5.42.0-1.29 [ 40s] [74/111] cumulate build-mkbaselibs-20120927-1.1 [ 40s] [75/111] cumulate linux-glibc-devel-6.6-1.58 [ 40s] [76/111] cumulate terminfo-base-full-6.6-2.11 [ 40s] [77/111] cumulate autoconf-2.71-1.58 [ 40s] [78/111] cumulate file-5.46-1.40 [ 40s] [79/111] cumulate glibc-locale-2.40-7.9 [ 40s] [80/111] cumulate tar-1.17-1.2 [ 40s] [81/111] cumulate binutils-2.43-1.58 [ 40s] [82/111] cumulate gzip-1.3.12-1.41 [ 40s] [83/111] cumulate pam-1.1.6-2.26 [ 40s] [84/111] cumulate tzdata-2025b-1.2 [ 40s] [85/111] cumulate libdw-0.189-1.56 [ 40s] [86/111] cumulate gcc-14.2.0-3.34 [ 40s] [87/111] cumulate libarchive-3.8.1-1.54 [ 40s] [88/111] cumulate qemu-accel-x86_64-armv7l-0.4-1.25 [ 40s] [89/111] cumulate automake-1.16.5-1.58 [ 40s] [90/111] cumulate libasm-0.189-1.56 [ 40s] [91/111] cumulate libncurses6-6.6-2.11 [ 40s] [92/111] cumulate build-20120927-1.1 [ 40s] [93/111] cumulate rpm-4.14.1.1-3.6 [ 40s] [94/111] cumulate libncurses-6.6-2.11 [ 40s] [95/111] cumulate less-685-1.2 [ 40s] [96/111] cumulate libreadline-5.2-3.18 [ 40s] [97/111] cumulate libtool-2.5.4-2.26 [ 40s] [98/111] cumulate elfutils-0.189-1.56 [ 40s] [99/111] cumulate python3-base-3.14.2-4.3 [ 40s] [100/111] cumulate util-linux-2.41.2-1.35 [ 40s] [101/111] cumulate python3-3.14.2-4.3 [ 40s] [102/111] cumulate python3-build-1.0.3-1.2 [ 40s] [103/111] cumulate python3-pip-25.3-1.1 [ 40s] [104/111] cumulate util-linux-su-2.41.2-1.35 [ 40s] [105/111] cumulate python3-devel-3.14.2-4.3 [ 40s] [106/111] cumulate python3-setuptools-80.9.0-1.7 [ 40s] [107/111] cumulate libxcrypt-devel-4.4.36-1.58 [ 40s] [108/111] cumulate nss-3.109-1.29 [ 40s] [109/111] cumulate glibc-devel-2.40-7.9 [ 40s] [110/111] cumulate libsoftokn3-3.109-1.29 [ 40s] [111/111] cumulate rpm-build-4.14.1.1-3.6 [ 40s] now installing cumulated packages [ 49s] Preparing... ######################################## [ 49s] Updating / installing... [ 49s] setup-0.9-1.20 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 49s] ########################## [ 49s] filesystem-3.1-3.1 ######################################## [ 50s] python3-six-1.17.0-1.1 ######################################## [ 50s] python3-pyparsing-3.3.1-1.9 ######################################## [ 50s] python3-packaging-25.0-1.12 ######################################## [ 50s] libmagic-data-5.46-1.40 ######################################## [ 50s] python3-flit_core-3.12.0-1.1 ######################################## [ 51s] glibc-2.40-7.9 ######################################## [ 51s] libgcc-14.2.0-3.34 ######################################## [ 51s] bash-3.2.57-1.2 ######################################## [ 51s] zlib-1.3.1-1.57 ######################################## [ 52s] coreutils-6.9-16.1 ######################################## [ 52s] libbz2-1.0.8-2.25 ######################################## [ 52s] liblzma-5.8.1-4.20 ######################################## [ 53s] libstdc++-14.2.0-3.34 ######################################## [ 53s] libelf-0.189-1.56 ######################################## [ 53s] libdw-0.189-1.56 ######################################## [ 54s] libopenssl3-3.0.18-1.48 ######################################## [ 54s] libxcrypt-4.4.36-1.58 ######################################## [ 54s] libmagic-5.46-1.40 ######################################## [ 55s] libblkid-2.41.2-1.35 ######################################## [ 55s] libsqlite-3.51.0-1.38 ######################################## [ 55s] nspr-4.36-1.27 ######################################## [ 56s] pam-1.1.6-2.26 ######################################## [ 56s] gdbm-1.8.3-1.58 ######################################## [ 59s] perl-5.42.0-1.29 ######################################## [ 60s] libcap-2.73-2.23 ######################################## [ 60s] libfreebl3-3.109-1.29 ######################################## [ 60s] liblua-5.1.5-1.42 ######################################## [ 60s] libpopt-1.16-1.41 ######################################## [ 61s] libpython3_141_0-3.14.2-4.3 ######################################## [ 61s] libuuid-2.41.2-1.35 ######################################## [ 61s] libzstd1-1.5.7-1.34 ######################################## [ 61s] pkg-config-0.29.2-2.25 ######################################## [ 61s] build-mkbaselibs-20120927-1.1 ######################################## [ 62s] linux-glibc-devel-6.6-1.58 ######################################## [ 62s] libxcrypt-devel-4.4.36-1.58 ######################################## [ 62s] glibc-devel-2.40-7.9 ######################################## [ 62s] terminfo-base-full-6.6-2.11 ######################################## [ 62s] libncurses6-6.6-2.11 ######################################## [ 63s] libreadline-5.2-3.18 ######################################## [ 63s] libfdisk-2.41.2-1.35 ######################################## [ 63s] nss-certs-3.109-1.29 ######################################## [ 63s] libsoftokn3-3.109-1.29 ######################################## [ 63s] nss-3.109-1.29 ######################################## [ 64s] liblastlog2-2.41.2-1.35 ######################################## [ 64s] libmount-2.41.2-1.35 ######################################## [ 64s] libasm-0.189-1.56 ######################################## [ 64s] libcc1-14.2.0-3.34 ######################################## [ 64s] xz-5.8.1-4.20 ######################################## [ 64s] bzip2-1.0.8-2.25 ######################################## [ 64s] gzip-1.3.12-1.41 ######################################## [ 64s] binutils-libs-2.43-1.58 ######################################## [ 65s] binutils-2.43-1.58 ######################################## [ 65s] make-4.4.1-1.45 ######################################## [ 65s] findutils-4.3.8-1.45 ######################################## [ 65s] libattr-2.5.1-1.48 ######################################## [ 66s] libacl-2.3.2-1.45 ######################################## [ 66s] tar-1.17-1.2 ######################################## [ 66s] libexpat-2.7.3-1.52 ######################################## [ 66s] libffi-3.4.7-1.57 ######################################## [ 68s] python3-base-3.14.2-4.3 ######################################## [ 68s] python3-3.14.2-4.3 ######################################## [ 68s] libgfortran-14.2.0-3.34 ######################################## [ 68s] libgomp-14.2.0-3.34 ######################################## [ 68s] libitm-14.2.0-3.34 ######################################## [ 69s] libltdl-2.5.4-2.26 ######################################## [ 69s] libpcre-8.45-1.45 ######################################## [ 69s] libsmack-1.3.1-1.41 ######################################## [ 70s] libsmartcols-2.41.2-1.35 ######################################## [ 70s] libxml2-2.15.1-1.11 ######################################## [ 70s] libarchive-3.8.1-1.54 ######################################## [ 71s] rpm-4.14.1.1-3.6 ######################################## [ 71s] m4-1.4.20-1.2 ######################################## [ 71s] autoconf-2.71-1.58 ######################################## [ 71s] automake-1.16.5-1.58 ######################################## [ 72s] patch-2.8-1.29 ######################################## [ 72s] sed-4.1c-4.10 ######################################## [ 72s] util-linux-2.41.2-1.35 ######################################## [ 72s] libatomic-14.2.0-3.34 ######################################## [ 72s] libtool-2.5.4-2.26 ######################################## [ 73s] python3-setuptools-80.9.0-1.7 ######################################## [ 73s] python3-build-1.0.3-1.2 ######################################## [ 73s] python3-pip-25.3-1.1 ######################################## [ 73s] build-20120927-1.1 ######################################## [ 73s] libncurses-6.6-2.11 ######################################## [ 75s] libstdc++-devel-14.2.0-3.34 ######################################## [ 75s] build-compare-2023.06.18-1.22 ######################################## [ 75s] hal-rootstrap-checker-1.0.0-6.1 ######################################## [ 79s] qemu-linux-user-x86_64-cross-9.2.3.1-4######################################## [ 83s] gcc-14.2.0-3.34 ######################################## [ 96s] qemu-accel-x86_64-armv7l-0.4-1.25 ######################################## [ 96s] util-linux-su-2.41.2-1.35 ######################################## [ 96s] rpm-build-4.14.1.1-3.6 ######################################## [ 96s] smack-1.3.1-1.41 ######################################## [ 96s] grep-2.5.2-2.22 ######################################## [ 97s] python3-devel-3.14.2-4.3 ######################################## [ 97s] elfutils-0.189-1.56 ######################################## [ 97s] less-685-1.2 ######################################## [ 97s] file-5.46-1.40 ######################################## [ 97s] glibc-locale-2.40-7.9 ######################################## [ 97s] tzdata-2025b-1.2 ######################################## [ 98s] cpp-14.2.0-3.34 ######################################## [ 99s] gcc-c++-14.2.0-3.34 ######################################## [ 99s] gawk-3.1.5-2.1 ######################################## [ 99s] cpio-2.8-2.1 ######################################## [ 100s] diffutils-3.10-1.3 ######################################## [ 100s] hostname-3.23-1.2 ######################################## [ 100s] net-tools-2.0_20121208git-1.40 ######################################## [ 100s] update-alternatives-1.22.21-1.2 ######################################## [ 100s] which-2.17-2.1 ######################################## [ 101s] now finalizing build dir... [ 102s] ----------------------------------------------------------------- [ 102s] I have the following modifications for python3-pyproject_hooks.spec: [ 102s] 4c4 [ 102s] < Release: 0 [ 102s] --- [ 102s] > Release: 1.12 [ 102s] build target is armv7l-tizen-linux [ 102s] ----------------------------------------------------------------- [ 102s] ----- building python3-pyproject_hooks.spec (user abuild) [ 102s] ----------------------------------------------------------------- [ 102s] ----------------------------------------------------------------- [ 103s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X/standard/a86b6ffd41810b3f2636a8f4a096a6a2-python3-pyproject_hooks' /home/abuild/rpmbuild/SOURCES/python3-pyproject_hooks.spec [ 103s] Building target platforms: armv7l-tizen-linux [ 103s] Building for target armv7l-tizen-linux [ 103s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.MTFEOZ [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + rm -rf pyproject_hooks-1.2.0 [ 103s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-pyproject_hooks-1.2.0.tar.gz [ 103s] + /bin/tar -xof - [ 103s] + STATUS=0 [ 103s] + '[' 0 -ne 0 ']' [ 103s] + cd pyproject_hooks-1.2.0 [ 103s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 103s] + cp /home/abuild/rpmbuild/SOURCES/python3-pyproject_hooks.manifest . [ 103s] + exit 0 [ 103s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.bXLV3F [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 103s] + export CFLAGS [ 103s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 103s] + export CXXFLAGS [ 103s] + LDFLAGS= [ 103s] + export LDFLAGS [ 103s] + cd pyproject_hooks-1.2.0 [ 103s] + ref=/usr/lib/rpm [ 103s] + mints=0 [ 103s] + case $(uname -m) in [ 103s] ++ uname -m [ 103s] + for s in guess sub [ 103s] ++ find -maxdepth 8 -name config.guess [ 103s] + for s in guess sub [ 103s] ++ find -maxdepth 8 -name config.sub [ 103s] + exit 0 [ 103s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.NG7cyX [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm [ 103s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm [ 103s] + cd pyproject_hooks-1.2.0 [ 103s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm /home/abuild/rpmbuild/SOURCES/pyproject_hooks-1.2.0-py3-none-any.whl [ 128s] Processing /home/abuild/rpmbuild/SOURCES/pyproject_hooks-1.2.0-py3-none-any.whl [ 129s] Installing collected packages: pyproject-hooks [ 129s] Successfully installed pyproject-hooks-1.2.0 [ 130s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.0-1.12 --unique-debug-src-base python3-pyproject_hooks-1.2.0-1.12.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pyproject_hooks-1.2.0 [ 130s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pyproject_hooks-1.2.0/python3-pyproject_hooks-debuginfo.manifest [ 130s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pyproject_hooks-1.2.0/python3-pyproject_hooks-debugsource.manifest [ 130s] + /usr/lib/rpm/check-buildroot [ 130s] + /usr/lib/rpm//brp-compress [ 130s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 130s] + /usr/lib/rpm/brp-python-hardlink [ 130s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm [ 130s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/pyproject_hooks-1.2.0/isu.list [ 130s] ~/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm ~/rpmbuild/BUILD/pyproject_hooks-1.2.0 [ 130s] ~/rpmbuild/BUILD/pyproject_hooks-1.2.0 [ 130s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm arm [ 130s] Package: python3-pyproject_hooks, Group: Unspecified [ 130s] # NOTICE: Config app-rootstrap-checker.yaml skipped # [ 131s] # NOTICE: Config hal-rootstrap-checker.yaml skipped # [ 131s] # NOTICE: Config web-plugin-rootstrap-checker.yaml skipped # [ 131s] ########################################################################################## [ 131s] # SUCCESS: hal-rootstrap-checker done # [ 131s] ########################################################################################## [ 131s] Processing files: python3-pyproject_hooks-1.2.0-1.12.noarch [ 131s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.EyARd3 [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + cd pyproject_hooks-1.2.0 [ 131s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm/usr/share/licenses/python3-pyproject_hooks [ 131s] + export LC_ALL=C [ 131s] + LC_ALL=C [ 131s] + export LICENSEDIR [ 131s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm/usr/share/licenses/python3-pyproject_hooks [ 131s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm/usr/share/licenses/python3-pyproject_hooks [ 131s] + exit 0 [ 131s] Provides: python3-pyproject_hooks = 1.2.0-1.12 [ 131s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 131s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm [ 131s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-pyproject_hooks-1.2.0-1.12.src.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-pyproject_hooks-1.2.0-1.12.noarch.rpm [ 131s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Yl3oN5 [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm [ 131s] + cd pyproject_hooks-1.2.0 [ 131s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pyproject_hooks-1.2.0-1.12.arm [ 131s] + exit 0 [ 131s] ... checking for files with abuild user/group [ 131s] ... creating baselibs [ 132s] [ 132s] 8135aa349310 finished "build python3-pyproject_hooks.spec" at Thu May 7 02:30:22 UTC 2026. [ 132s]