[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] 58ddb04e8dc7 started "build libarchive.spec" at Fri Dec 27 07:31:23 UTC 2024. [ 0s] [ 0s] Building libarchive for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 'dce4f631d4ba2dd37d9ec3e1e0924fb8' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/libarchive.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/libarchive.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/11/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/libarchive.spec build ... [ 2s] registering binfmt handlers for cross build [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/42] preinstalling libmagic-data... [ 5s] [2/42] preinstalling libncurses... [ 6s] [3/42] preinstalling setup... [ 6s] [4/42] preinstalling filesystem... [ 6s] [5/42] preinstalling glibc... [ 6s] [6/42] preinstalling bash... [ 7s] [7/42] preinstalling diffutils... [ 7s] [8/42] preinstalling grep... [ 7s] [9/42] preinstalling libattr... [ 7s] [10/42] preinstalling libblkid... [ 7s] [11/42] preinstalling libbz2... [ 8s] [12/42] preinstalling libfreebl3... [ 8s] [13/42] preinstalling libgcc... [ 8s] [14/42] preinstalling liblua... [ 8s] [15/42] preinstalling liblzma... [ 8s] [16/42] preinstalling libpopt... [ 8s] [17/42] preinstalling libreadline... [ 9s] [18/42] preinstalling libsmack... [ 9s] [19/42] preinstalling libsqlite... [ 9s] [20/42] preinstalling libuuid... [ 9s] [21/42] preinstalling libxcrypt... [ 9s] [22/42] preinstalling libzstd1... [ 10s] [23/42] preinstalling nspr... [ 10s] [24/42] preinstalling sed... [ 10s] [25/42] preinstalling zlib... [ 10s] [26/42] preinstalling qemu-accel-x86_64-aarch64... [ 28s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 33s] [28/42] preinstalling coreutils... [ 33s] [29/42] preinstalling libacl... [ 33s] [30/42] preinstalling libcap... [ 34s] [31/42] preinstalling libelf... [ 34s] [32/42] preinstalling libmount... [ 34s] [33/42] preinstalling smack... [ 34s] [34/42] preinstalling bzip2... [ 34s] [35/42] preinstalling libmagic... [ 34s] [36/42] preinstalling libxml2... [ 35s] [37/42] preinstalling tar... [ 35s] [38/42] preinstalling util-linux... [ 35s] [39/42] preinstalling util-linux-su... [ 36s] [40/42] preinstalling nss... [ 36s] [41/42] preinstalling libsoftokn3... [ 36s] [42/42] preinstalling rpm... [ 37s] running qemu-linux-user-x86_64-cross postinstall script [ 38s] running qemu-accel-x86_64-aarch64 postinstall script [ 38s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 38s] running setup postinstall script [ 38s] chroot: failed to run command '': No such file or directory [ 38s] initializing rpm db... [ 39s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 39s] breaking dependency libxcrypt-devel -> glibc-devel [ 39s] cycle: libsoftokn3 -> nss [ 39s] breaking dependency nss -> libsoftokn3 [ 39s] done [ 39s] querying package ids... [ 41s] [1/114] cumulate libmagic-data-5.45-1.7 [ 41s] [2/114] cumulate setup-0.9-1.4 [ 41s] [3/114] cumulate filesystem-3.1-1.1 [ 41s] [4/114] cumulate glibc-2.40-1.1 [ 41s] [5/114] cumulate bash-3.2.57-1.1 [ 41s] [6/114] cumulate cpio-2.8-1.1 [ 41s] [7/114] cumulate diffutils-3.10-1.1 [ 41s] [8/114] cumulate findutils-4.3.8-1.8 [ 41s] [9/114] cumulate gdbm-1.8.3-1.11 [ 41s] [10/114] cumulate hostname-3.23-1.1 [ 41s] [11/114] cumulate libatomic-14.2.0-1.10 [ 41s] [12/114] cumulate libattr-2.5.1-1.8 [ 41s] [13/114] cumulate libblkid-2.39.3-1.8 [ 41s] [14/114] cumulate libbz2-1.0.8-1.8 [ 41s] [15/114] cumulate libcom_err-1.46.0-1.9 [ 41s] [16/114] cumulate libfreebl3-3.98-1.11 [ 41s] [17/114] cumulate libgcc-14.2.0-1.10 [ 41s] [18/114] cumulate libgomp-14.2.0-1.10 [ 41s] [19/114] cumulate libitm-14.2.0-1.10 [ 41s] [20/114] cumulate libltdl-2.4.7-1.12 [ 41s] [21/114] cumulate liblua-5.1.5-1.8 [ 41s] [22/114] cumulate liblzma-5.6.3-1.3 [ 41s] [23/114] cumulate libopenssl3-3.0.13-1.11 [ 41s] [24/114] cumulate libpcre-8.45-1.8 [ 41s] [25/114] cumulate libpopt-1.16-1.7 [ 41s] [26/114] cumulate libsmack-1.3.1-1.7 [ 41s] [27/114] cumulate libsmartcols-2.39.3-1.8 [ 41s] [28/114] cumulate libsqlite-3.48.0-1.4 [ 41s] [29/114] cumulate libuuid-2.39.3-1.8 [ 41s] [30/114] cumulate libxcrypt-4.4.36-1.10 [ 41s] [31/114] cumulate libzstd1-1.5.6-1.4 [ 41s] [32/114] cumulate m4-1.4.19-1.1 [ 41s] [33/114] cumulate net-tools-2.0_20121208git-1.7 [ 41s] [34/114] cumulate nspr-4.35-1.8 [ 41s] [35/114] cumulate patch-2.7.6-1.7 [ 41s] [36/114] cumulate pkg-config-0.29.2-1.8 [ 41s] [37/114] cumulate sed-4.1c-1.8 [ 41s] [38/114] cumulate update-alternatives-1.22.2-1.1 [ 41s] [39/114] cumulate which-2.17-1.1 [ 41s] [40/114] cumulate zlib-1.3.1-1.4 [ 41s] [41/114] cumulate build-compare-2023.06.18-1.4 [ 41s] [42/114] cumulate hal-rootstrap-checker-0.1.0-2.1 [ 41s] [43/114] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-21.4 [ 41s] [44/114] cumulate binutils-libs-2.43-1.11 [ 41s] [45/114] cumulate coreutils-6.9-14.4 [ 41s] [46/114] cumulate cpp-14.2.0-1.10 [ 41s] [47/114] cumulate gawk-3.1.5-1.1 [ 41s] [48/114] cumulate gcc-c++-14.2.0-1.10 [ 41s] [49/114] cumulate grep-2.5.2-1.7 [ 41s] [50/114] cumulate libacl-2.3.2-1.8 [ 41s] [51/114] cumulate libcap-2.69-1.9 [ 41s] [52/114] cumulate libelf-0.189-1.10 [ 41s] [53/114] cumulate libext2fs-1.46.0-1.9 [ 41s] [54/114] cumulate libgfortran-14.2.0-1.10 [ 41s] [55/114] cumulate libmount-2.39.3-1.8 [ 41s] [56/114] cumulate libstdc++-14.2.0-1.10 [ 41s] [57/114] cumulate make-4.4-1.8 [ 41s] [58/114] cumulate nss-certs-3.98-1.11 [ 41s] [59/114] cumulate smack-1.3.1-1.7 [ 41s] [60/114] cumulate xz-devel-5.6.3-1.3 [ 41s] [61/114] cumulate bison-3.0.5-1.10 [ 41s] [62/114] cumulate bzip2-1.0.8-1.8 [ 41s] [63/114] cumulate libfdisk-2.39.3-1.8 [ 41s] [64/114] cumulate libmagic-5.45-1.7 [ 41s] [65/114] cumulate libxml2-2.12.5-1.9 [ 41s] [66/114] cumulate xz-5.6.3-1.3 [ 41s] [67/114] cumulate perl-5.38.0-1.10 [ 41s] [68/114] cumulate build-mkbaselibs-20120927-1.1 [ 41s] [69/114] cumulate libstdc++-devel-14.2.0-1.10 [ 41s] [70/114] cumulate linux-glibc-devel-6.6-1.10 [ 41s] [71/114] cumulate file-5.45-1.7 [ 41s] [72/114] cumulate tar-1.17-1.1 [ 41s] [73/114] cumulate terminfo-base-full-6.4-1.11 [ 41s] [74/114] cumulate autoconf-2.71-1.10 [ 41s] [75/114] cumulate glibc-locale-2.40-1.1 [ 41s] [76/114] cumulate gzip-1.3.12-1.7 [ 41s] [77/114] cumulate libcc1-14.2.0-1.10 [ 41s] [78/114] cumulate libhwasan-14.2.0-1.10 [ 41s] [79/114] cumulate libubsan-14.2.0-1.10 [ 41s] [80/114] cumulate binutils-2.43-1.11 [ 41s] [81/114] cumulate pam-1.1.6-1.7 [ 41s] [82/114] cumulate tzdata-2023c-1.1 [ 41s] [83/114] cumulate libdw-0.189-1.10 [ 41s] [84/114] cumulate automake-1.16.5-1.10 [ 41s] [85/114] cumulate libasm-0.189-1.10 [ 41s] [86/114] cumulate libncurses5-6.4-1.11 [ 41s] [87/114] cumulate libncurses6-6.4-1.11 [ 41s] [88/114] cumulate build-20120927-1.1 [ 41s] [89/114] cumulate gcc-14.2.0-1.10 [ 41s] [90/114] cumulate libncurses-6.4-1.11 [ 41s] [91/114] cumulate less-668-1.1 [ 41s] [92/114] cumulate libreadline-5.2-1.8 [ 41s] [93/114] cumulate qemu-accel-x86_64-aarch64-0.4-1.4 [ 41s] [94/114] cumulate libtool-2.4.7-1.12 [ 41s] [95/114] cumulate ncurses-devel-6.4-1.11 [ 41s] [96/114] cumulate elfutils-0.189-1.10 [ 41s] [97/114] cumulate readline-devel-5.2-1.8 [ 41s] [98/114] cumulate libxml2-tools-2.12.5-1.9 [ 41s] [99/114] cumulate util-linux-2.39.3-1.8 [ 41s] [100/114] cumulate util-linux-su-2.39.3-1.8 [ 41s] [101/114] cumulate libxcrypt-devel-4.4.36-1.10 [ 41s] [102/114] cumulate nss-3.98-1.11 [ 41s] [103/114] cumulate glibc-devel-2.40-1.1 [ 41s] [104/114] cumulate libsoftokn3-3.98-1.11 [ 41s] [105/114] cumulate rpm-4.14.1.1-1.10 [ 41s] [106/114] cumulate bzip2-devel-1.0.8-1.8 [ 41s] [107/114] cumulate libattr-devel-2.5.1-1.8 [ 41s] [108/114] cumulate zlib-devel-1.3.1-1.4 [ 41s] [109/114] cumulate libcom_err-devel-1.46.0-1.9 [ 41s] [110/114] cumulate rpm-build-4.14.1.1-1.10 [ 41s] [111/114] cumulate libext2fs-devel-1.46.0-1.9 [ 41s] [112/114] cumulate libopenssl3-devel-3.0.13-1.11 [ 41s] [113/114] cumulate libacl-devel-2.3.2-1.8 [ 41s] [114/114] cumulate libxml2-devel-2.12.5-1.9 [ 41s] now installing cumulated packages [ 44s] Preparing... ######################################## [ 44s] Updating / installing... [ 44s] setup-0.9-1.4 ######################################## [ 44s] filesystem-3.1-1.1 ######################################## [ 44s] glibc-2.40-1.1 ######################################## [ 44s] bash-3.2.57-1.1 ######################################## [ 44s] zlib-1.3.1-1.4 ######################################## [ 45s] pkg-config-0.29.2-1.8 ######################################## [ 45s] libgcc-14.2.0-1.10 ######################################## [ 46s] libstdc++-14.2.0-1.10 ######################################## [ 47s] coreutils-6.9-14.4 ######################################## [ 47s] libbz2-1.0.8-1.8 ######################################## [ 47s] liblzma-5.6.3-1.3 ######################################## [ 47s] libelf-0.189-1.10 ######################################## [ 48s] libdw-0.189-1.10 ######################################## [ 48s] libxcrypt-4.4.36-1.10 ######################################## [ 49s] libblkid-2.39.3-1.8 ######################################## [ 49s] nspr-4.35-1.8 ######################################## [ 50s] pam-1.1.6-1.7 ######################################## [ 50s] libxml2-2.12.5-1.9 ######################################## [ 51s] terminfo-base-full-6.4-1.11 ######################################## [ 51s] libncurses6-6.4-1.11 ######################################## [ 51s] libreadline-5.2-1.8 ######################################## [ 52s] libcap-2.69-1.9 ######################################## [ 52s] libattr-2.5.1-1.8 ######################################## [ 53s] libacl-2.3.2-1.8 ######################################## [ 53s] tar-1.17-1.1 ######################################## [ 53s] libcom_err-1.46.0-1.9 ######################################## [ 54s] libfreebl3-3.98-1.11 ######################################## [ 54s] liblua-5.1.5-1.8 ######################################## [ 54s] libpopt-1.16-1.7 ######################################## [ 55s] libuuid-2.39.3-1.8 ######################################## [ 55s] libzstd1-1.5.6-1.4 ######################################## [ 56s] m4-1.4.19-1.1 ######################################## [ 56s] libfdisk-2.39.3-1.8 ######################################## [ 56s] libext2fs-1.46.0-1.9 ######################################## [ 56s] libxml2-tools-2.12.5-1.9 ######################################## [ 57s] libncurses5-6.4-1.11 ######################################## [ 57s] ncurses-devel-6.4-1.11 ######################################## [ 57s] readline-devel-5.2-1.8 ######################################## [ 57s] nss-certs-3.98-1.11 ######################################## [ 57s] libmount-2.39.3-1.8 ######################################## [ 58s] libasm-0.189-1.10 ######################################## [ 58s] xz-devel-5.6.3-1.3 ######################################## [ 58s] xz-5.6.3-1.3 ######################################## [ 58s] bzip2-1.0.8-1.8 ######################################## [ 58s] linux-glibc-devel-6.6-1.10 ######################################## [ 58s] gzip-1.3.12-1.7 ######################################## [ 58s] libcc1-14.2.0-1.10 ######################################## [ 59s] libhwasan-14.2.0-1.10 ######################################## [ 59s] libubsan-14.2.0-1.10 ######################################## [ 60s] libgfortran-14.2.0-1.10 ######################################## [ 60s] binutils-libs-2.43-1.11 ######################################## [ 61s] binutils-2.43-1.11 ######################################## [ 61s] make-4.4-1.8 ######################################## [ 62s] findutils-4.3.8-1.8 ######################################## [ 62s] gdbm-1.8.3-1.11 ######################################## [ 67s] perl-5.38.0-1.10 ######################################## [ 67s] build-mkbaselibs-20120927-1.1 ######################################## [ 67s] autoconf-2.71-1.10 ######################################## [ 68s] automake-1.16.5-1.10 ######################################## [ 68s] libatomic-14.2.0-1.10 ######################################## [ 69s] libgomp-14.2.0-1.10 ######################################## [ 69s] libitm-14.2.0-1.10 ######################################## [ 73s] gcc-14.2.0-1.10 ######################################## [ 73s] libxcrypt-devel-4.4.36-1.10 ######################################## [ 73s] glibc-devel-2.40-1.1 ######################################## [ 74s] zlib-devel-1.3.1-1.4 ######################################## [ 74s] libattr-devel-2.5.1-1.8 ######################################## [ 74s] libcom_err-devel-1.46.0-1.9 ######################################## [ 74s] libltdl-2.4.7-1.12 ######################################## [ 74s] libopenssl3-3.0.13-1.11 ######################################## [ 75s] libpcre-8.45-1.8 ######################################## [ 75s] libsmack-1.3.1-1.7 ######################################## [ 75s] libsmartcols-2.39.3-1.8 ######################################## [ 76s] libsqlite-3.48.0-1.4 ######################################## [ 76s] libsoftokn3-3.98-1.11 ######################################## [ 77s] nss-3.98-1.11 ######################################## [ 77s] patch-2.7.6-1.7 ######################################## [ 77s] sed-4.1c-1.8 ######################################## [ 77s] util-linux-2.39.3-1.8 ######################################## [ 78s] libmagic-data-5.45-1.7 ######################################## [ 78s] libmagic-5.45-1.7 ######################################## [ 79s] rpm-4.14.1.1-1.10 ######################################## [ 79s] rpm-build-4.14.1.1-1.10 ######################################## [ 79s] file-5.45-1.7 ######################################## [ 79s] util-linux-su-2.39.3-1.8 ######################################## [ 79s] smack-1.3.1-1.7 ######################################## [ 79s] grep-2.5.2-1.7 ######################################## [ 79s] libopenssl3-devel-3.0.13-1.11 ######################################## [ 79s] libtool-2.4.7-1.12 ######################################## [ 79s] libext2fs-devel-1.46.0-1.9 ######################################## [ 79s] libacl-devel-2.3.2-1.8 ######################################## [ 79s] libxml2-devel-2.12.5-1.9 ######################################## [ 79s] bzip2-devel-1.0.8-1.8 ######################################## [ 92s] qemu-accel-x86_64-aarch64-0.4-1.4 ######################################## [ 92s] build-20120927-1.1 ######################################## [ 92s] elfutils-0.189-1.10 ######################################## [ 93s] bison-3.0.5-1.10 ######################################## [ 93s] libncurses-6.4-1.11 ######################################## [ 93s] less-668-1.1 ######################################## [ 93s] glibc-locale-2.40-1.1 ######################################## [ 94s] tzdata-2023c-1.1 ######################################## [ 95s] libstdc++-devel-14.2.0-1.10 ######################################## [ 97s] cpp-14.2.0-1.10 ######################################## [ 100s] gcc-c++-14.2.0-1.10 ######################################## [ 100s] build-compare-2023.06.18-1.4 ######################################## [ 100s] hal-rootstrap-checker-0.1.0-2.1 ######################################## [ 106s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 106s] gawk-3.1.5-1.1 ######################################## [ 106s] cpio-2.8-1.1 ######################################## [ 106s] diffutils-3.10-1.1 ######################################## [ 106s] hostname-3.23-1.1 ######################################## [ 106s] net-tools-2.0_20121208git-1.7 ######################################## [ 106s] update-alternatives-1.22.2-1.1 ######################################## [ 106s] which-2.17-1.1 ######################################## [ 109s] now finalizing build dir... [ 111s] ----------------------------------------------------------------- [ 111s] I have the following modifications for libarchive.spec: [ 111s] 4c4 [ 111s] < Release: 0 [ 111s] --- [ 111s] > Release: 1.10 [ 111s] build target is aarch64-tizen-linux [ 111s] ----------------------------------------------------------------- [ 111s] ----- building libarchive.spec (user abuild) [ 111s] ----------------------------------------------------------------- [ 111s] ----------------------------------------------------------------- [ 112s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/dce4f631d4ba2dd37d9ec3e1e0924fb8-libarchive' /home/abuild/rpmbuild/SOURCES/libarchive.spec [ 112s] Building target platforms: aarch64-tizen-linux [ 112s] Building for target aarch64-tizen-linux [ 112s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ixFEcX [ 112s] + umask 022 [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + rm -rf libarchive-3.7.2 [ 112s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/v3.7.2.tar.gz [ 112s] + /bin/tar -xof - [ 113s] + STATUS=0 [ 113s] + '[' 0 -ne 0 ']' [ 113s] + cd libarchive-3.7.2 [ 113s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 113s] + cp /home/abuild/rpmbuild/SOURCES/libarchive.manifest . [ 113s] + /bin/patch -p1 [ 113s] patching file Makefile.am [ 113s] + exit 0 [ 113s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TEg97P [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd libarchive-3.7.2 [ 113s] + ref=/usr/lib/rpm [ 113s] + mints=0 [ 113s] + case $(uname -m) in [ 113s] ++ uname -m [ 113s] + mints=20120610 [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.guess [ 113s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 113s] + grep -q config-patches@ ./build/autoconf/config.guess [ 113s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build/autoconf/config.guess [ 113s] ++ tr -d $'\r' [ 113s] + timestamp=20220109 [ 113s] + test -n 20220109 [ 113s] + test 20220109 -ge 20120610 [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.sub [ 113s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 113s] + grep -q config-patches@ ./build/autoconf/config.sub [ 113s] ++ tr -d $'\r' [ 113s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build/autoconf/config.sub [ 113s] + timestamp=20220103 [ 113s] + test -n 20220103 [ 113s] + test 20220103 -ge 20120610 [ 113s] + LANG=C [ 113s] + export LANG [ 113s] + unset DISPLAY [ 113s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 113s] + export CFLAGS [ 113s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 113s] + export CXXFLAGS [ 113s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 113s] + export FFLAGS [ 113s] + LDFLAGS= [ 113s] + export LDFLAGS [ 113s] + export 'CFLAGS+= -fPIC' [ 113s] + CFLAGS+=' -fPIC' [ 113s] + export 'CXXFLAGS+= -fPIC' [ 113s] + CXXFLAGS+=' -fPIC' [ 113s] + export 'LDFLAGS+= -pie' [ 113s] + LDFLAGS+=' -pie' [ 113s] + autoreconf -fi [ 139s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build/autoconf'. [ 139s] libtoolize: copying file 'build/autoconf/ltmain.sh' [ 139s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build/autoconf'. [ 139s] libtoolize: copying file 'build/autoconf/libtool.m4' [ 140s] libtoolize: copying file 'build/autoconf/ltoptions.m4' [ 141s] libtoolize: copying file 'build/autoconf/ltsugar.m4' [ 142s] libtoolize: copying file 'build/autoconf/ltversion.m4' [ 143s] libtoolize: copying file 'build/autoconf/lt~obsolete.m4' [ 164s] configure.ac:116: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. [ 164s] configure.ac:116: You should run autoupdate. [ 164s] build/autoconf/ltoptions.m4:148: AC_LIBTOOL_WIN32_DLL is expanded from... [ 164s] configure.ac:116: the top level [ 164s] configure.ac:116: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you [ 164s] configure.ac:116: put the 'win32-dll' option into LT_INIT's first parameter. [ 164s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 164s] build/autoconf/ltoptions.m4:148: AC_LIBTOOL_WIN32_DLL is expanded from... [ 164s] configure.ac:116: the top level [ 164s] configure.ac:117: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 164s] configure.ac:117: You should run autoupdate. [ 164s] build/autoconf/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 164s] configure.ac:117: the top level [ 178s] configure.ac:112: installing 'build/autoconf/compile' [ 178s] configure.ac:30: installing 'build/autoconf/missing' [ 179s] Makefile.am: installing 'build/autoconf/depcomp' [ 188s] + AR=gcc-ar [ 188s] + export AR [ 188s] + NM=/bin/nm [ 188s] + export NM [ 188s] + RANLIB=gcc-ranlib [ 188s] + export RANLIB [ 188s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC' [ 188s] + export CFLAGS [ 188s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC' [ 188s] + export CXXFLAGS [ 188s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 188s] + export FFLAGS [ 188s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-bsdcpio [ 190s] checking for a BSD-compatible install... /bin/install -c [ 190s] checking whether build environment is sane... yes [ 190s] checking for a race-free mkdir -p... /bin/mkdir -p [ 190s] checking for gawk... gawk [ 190s] checking whether make sets $(MAKE)... yes [ 190s] checking whether make supports nested variables... yes [ 190s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 190s] checking whether make supports nested variables... (cached) yes [ 190s] checking build system type... aarch64-tizen-linux-gnu [ 190s] checking host system type... aarch64-tizen-linux-gnu [ 190s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 190s] checking whether the C compiler works... yes [ 190s] checking for C compiler default output file name... a.out [ 191s] checking for suffix of executables... [ 191s] checking whether we are cross compiling... no [ 191s] checking for suffix of object files... o [ 191s] checking whether the compiler supports GNU C... yes [ 191s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 191s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 192s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 192s] checking whether make supports the include directive... yes (GNU style) [ 192s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 192s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 192s] checking for stdio.h... yes [ 192s] checking for stdlib.h... yes [ 192s] checking for string.h... yes [ 193s] checking for inttypes.h... yes [ 193s] checking for stdint.h... yes [ 193s] checking for strings.h... yes [ 193s] checking for sys/stat.h... yes [ 193s] checking for sys/types.h... yes [ 193s] checking for unistd.h... yes [ 193s] checking for wchar.h... yes [ 193s] checking for minix/config.h... no [ 194s] checking for sys/time.h... yes [ 194s] checking whether it is safe to define __EXTENSIONS__... yes [ 194s] checking whether _XOPEN_SOURCE should be defined... no [ 194s] checking how to print strings... printf [ 194s] checking for a sed that does not truncate output... /bin/sed [ 194s] checking for grep that handles long lines and -e... /bin/grep [ 194s] checking for egrep... /bin/grep -E [ 194s] checking for fgrep... /bin/grep -F [ 194s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 194s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 194s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 194s] checking the name lister (/bin/nm) interface... BSD nm [ 194s] checking whether ln -s works... yes [ 194s] checking the maximum length of command line arguments... 1572864 [ 194s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 194s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 194s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 194s] checking for aarch64-tizen-linux-gnu-file... no [ 194s] checking for file... file [ 194s] checking for aarch64-tizen-linux-gnu-objdump... objdump [ 194s] checking how to recognize dependent libraries... pass_all [ 194s] checking for aarch64-tizen-linux-gnu-dlltool... dlltool [ 194s] checking how to associate runtime and link libraries... printf %s\n [ 194s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 194s] checking for archiver @FILE support... @ [ 194s] checking for aarch64-tizen-linux-gnu-strip... no [ 194s] checking for strip... strip [ 194s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 195s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 195s] checking for sysroot... no [ 195s] checking for a working dd... /bin/dd [ 195s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 195s] checking for aarch64-tizen-linux-gnu-mt... no [ 195s] checking for mt... no [ 195s] checking if : is a manifest tool... no [ 195s] checking for dlfcn.h... yes [ 195s] checking for objdir... .libs [ 196s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 196s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 196s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 196s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 196s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 196s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 196s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 197s] checking whether -lc should be explicitly linked in... no [ 197s] checking dynamic linker characteristics... GNU/Linux ld.so [ 197s] checking how to hardcode library paths into programs... immediate [ 197s] checking whether stripping libraries is possible... yes [ 197s] checking if libtool supports shared libraries... yes [ 197s] checking whether to build shared libraries... yes [ 197s] checking whether to build static libraries... no [ 197s] checking for aarch64-tizen-linux-gnu-strip... strip [ 197s] checking for dirent.h that defines DIR... yes [ 198s] checking for library containing opendir... none required [ 198s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 198s] checking for acl/libacl.h... yes [ 198s] checking for attr/xattr.h... no [ 198s] checking for copyfile.h... no [ 198s] checking for ctype.h... yes [ 199s] checking for errno.h... yes [ 199s] checking for ext2fs/ext2_fs.h... yes [ 199s] checking for fcntl.h... yes [ 199s] checking for fnmatch.h... yes [ 199s] checking for grp.h... yes [ 200s] checking whether EXT2_IOC_GETFLAGS is usable... yes [ 200s] checking for inttypes.h... (cached) yes [ 200s] checking for io.h... no [ 200s] checking for langinfo.h... yes [ 200s] checking for limits.h... yes [ 200s] checking for linux/fiemap.h... yes [ 201s] checking for linux/fs.h... yes [ 201s] checking for linux/magic.h... yes [ 201s] checking for linux/types.h... yes [ 201s] checking whether FS_IOC_GETFLAGS is usable... yes [ 201s] checking for locale.h... yes [ 202s] checking for membership.h... no [ 202s] checking for paths.h... yes [ 202s] checking for poll.h... yes [ 202s] checking for pthread.h... yes [ 202s] checking for pwd.h... yes [ 202s] checking for readpassphrase.h... no [ 202s] checking for signal.h... yes [ 203s] checking for spawn.h... yes [ 203s] checking for stdarg.h... yes [ 203s] checking for stdint.h... (cached) yes [ 203s] checking for stdlib.h... (cached) yes [ 203s] checking for string.h... (cached) yes [ 203s] checking for sys/acl.h... yes [ 203s] checking for sys/cdefs.h... yes [ 204s] checking for sys/ea.h... no [ 204s] checking for sys/extattr.h... no [ 204s] checking for sys/ioctl.h... yes [ 204s] checking for sys/mkdev.h... no [ 204s] checking for sys/mount.h... yes [ 204s] checking for sys/queue.h... yes [ 205s] checking for sys/param.h... yes [ 205s] checking for sys/poll.h... yes [ 205s] checking for sys/richacl.h... no [ 205s] checking for sys/select.h... yes [ 205s] checking for sys/statfs.h... yes [ 206s] checking for sys/statvfs.h... yes [ 206s] checking for sys/sysmacros.h... yes [ 206s] checking for sys/time.h... (cached) yes [ 206s] checking for sys/utime.h... no [ 206s] checking for sys/utsname.h... yes [ 206s] checking for sys/vfs.h... yes [ 207s] checking for sys/xattr.h... yes [ 207s] checking for time.h... yes [ 207s] checking for unistd.h... (cached) yes [ 208s] checking for utime.h... yes [ 208s] checking for wchar.h... (cached) yes [ 208s] checking for wctype.h... yes [ 208s] checking for windows.h... no [ 208s] checking for wincrypt.h... no [ 208s] checking for winioctl.h... no [ 209s] checking for zlib.h... yes [ 209s] checking for inflate in -lz... yes [ 209s] checking for bzlib.h... yes [ 209s] checking for BZ2_bzDecompressInit in -lbz2... yes [ 209s] checking for blake2.h... no [ 210s] checking for blake2sp_init in -lb2... no [ 210s] checking for ld used by GCC... /usr/aarch64-tizen-linux-gnu/bin/ld [ 210s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 210s] checking for shared library run path origin... done [ 211s] checking for iconv... yes [ 211s] checking for working iconv... yes [ 211s] checking for iconv declaration... [ 211s] extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); [ 211s] checking for iconv.h... yes [ 212s] checking for localcharset.h... no [ 212s] checking for locale_charset... no [ 212s] checking for locale_charset in -lcharset... no [ 213s] checking for lz4.h... no [ 213s] checking for lz4hc.h... no [ 213s] checking for LZ4_decompress_safe in -llz4... no [ 213s] checking for zstd.h... no [ 214s] checking for ZSTD_decompressStream in -lzstd... no [ 214s] checking for ZSTD_compressStream in -lzstd... no [ 214s] checking for lzma.h... yes [ 214s] checking for lzma_stream_decoder in -llzma... yes [ 215s] checking whether we have multithread support in lzma... yes [ 215s] checking whether we have ARM64 filter support in lzma... yes [ 215s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 215s] checking pkg-config is at least version 0.9.0... yes [ 215s] checking for libxml-2.0... yes [ 216s] checking for xmlInitParser in -lxml2... yes [ 216s] checking for libxml/xmlreader.h... yes [ 216s] checking for libxml/xmlwriter.h... yes [ 216s] checking for regex.h... yes [ 217s] checking for regcomp... yes [ 217s] checking whether C compiler accepts -Wall... yes [ 217s] checking whether C compiler accepts -Wformat... yes [ 217s] checking whether C compiler accepts -Wformat-security... yes [ 217s] checking whether ld supports --gc-sections... yes [ 218s] checking whether C compiler accepts -ffunction-sections... yes [ 218s] checking whether C compiler accepts -fdata-sections... yes [ 218s] checking for an ANSI C-conforming const... yes [ 218s] checking for uid_t in sys/types.h... yes [ 219s] checking for mode_t... yes [ 219s] checking for off_t... yes [ 220s] checking for size_t... yes [ 220s] checking for id_t... yes [ 220s] checking for uintptr_t... yes [ 221s] checking for struct tm.tm_gmtoff... yes [ 221s] checking for struct tm.__tm_gmtoff... no [ 222s] checking for struct statfs.f_namemax... no [ 222s] checking for struct statfs.f_iosize... no [ 222s] checking for struct statvfs.f_iosize... no [ 223s] checking for struct stat.st_birthtime... no [ 223s] checking for struct stat.st_birthtimespec.tv_nsec... no [ 224s] checking for struct stat.st_mtimespec.tv_nsec... no [ 224s] checking for struct stat.st_mtim.tv_nsec... yes [ 225s] checking for struct stat.st_mtime_n... no [ 225s] checking for struct stat.st_umtime... no [ 226s] checking for struct stat.st_mtime_usec... no [ 226s] checking for struct stat.st_blksize... yes [ 226s] checking for struct stat.st_flags... no [ 227s] checking for uintmax_t... yes [ 228s] checking for unsigned long long... yes [ 228s] checking for unsigned long long int... yes [ 228s] checking for long long int... yes [ 229s] checking for intmax_t... yes [ 229s] checking for uintmax_t... (cached) yes [ 229s] checking for int64_t... yes [ 229s] checking for uint64_t... yes [ 230s] checking for int32_t... yes [ 230s] checking for uint32_t... yes [ 231s] checking for int16_t... yes [ 231s] checking for uint16_t... yes [ 231s] checking for uint8_t... yes [ 231s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 232s] checking whether SIZE_MAX is declared... yes [ 232s] checking whether INT32_MAX is declared... yes [ 232s] checking whether INT32_MIN is declared... yes [ 232s] checking whether INT64_MAX is declared... yes [ 233s] checking whether INT64_MIN is declared... yes [ 233s] checking whether UINT64_MAX is declared... yes [ 233s] checking whether UINT32_MAX is declared... yes [ 233s] checking whether INTMAX_MAX is declared... yes [ 234s] checking whether INTMAX_MIN is declared... yes [ 234s] checking whether UINTMAX_MAX is declared... yes [ 234s] checking whether SSIZE_MAX is declared... yes [ 234s] checking whether EFTYPE is declared... no [ 235s] checking whether EILSEQ is declared... yes [ 235s] checking for wchar_t... yes [ 236s] checking size of wchar_t... 4 [ 236s] checking size of int... 4 [ 236s] checking size of long... 8 [ 236s] checking whether aarch64-tizen-linux-gnu-gcc needs -traditional... no [ 236s] checking for sys/mkdev.h... (cached) no [ 236s] checking for sys/sysmacros.h... (cached) yes [ 236s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 237s] checking for working memcmp... yes [ 237s] checking whether lstat correctly handles trailing slash... yes [ 237s] checking whether lstat accepts an empty string... no [ 238s] checking whether stat accepts an empty string... no [ 238s] checking whether strerror_r is declared... yes [ 238s] checking whether strerror_r returns char *... yes [ 238s] checking for strftime... yes [ 239s] checking for vprintf... yes [ 239s] checking for CreateHardLinkA... no [ 239s] checking for arc4random_buf... yes [ 240s] checking for chflags... no [ 240s] checking for chown... yes [ 240s] checking for chroot... yes [ 240s] checking for ctime_r... yes [ 240s] checking for fchdir... yes [ 241s] checking for fchflags... no [ 241s] checking for fchmod... yes [ 241s] checking for fchown... yes [ 241s] checking for fcntl... yes [ 242s] checking for fdopendir... yes [ 242s] checking for fnmatch... yes [ 242s] checking for fork... yes [ 242s] checking for fstat... yes [ 243s] checking for fstatat... yes [ 243s] checking for fstatfs... yes [ 243s] checking for fstatvfs... yes [ 243s] checking for ftruncate... yes [ 244s] checking for futimens... yes [ 244s] checking for futimes... yes [ 244s] checking for futimesat... yes [ 244s] checking for geteuid... yes [ 245s] checking for getline... yes [ 245s] checking for getpid... yes [ 245s] checking for getgrgid_r... yes [ 245s] checking for getgrnam_r... yes [ 246s] checking for getpwnam_r... yes [ 246s] checking for getpwuid_r... yes [ 246s] checking for getvfsbyname... no [ 246s] checking for gmtime_r... yes [ 247s] checking for lchflags... no [ 247s] checking for lchmod... yes [ 247s] checking for lchown... yes [ 247s] checking for link... yes [ 248s] checking for linkat... yes [ 248s] checking for localtime_r... yes [ 248s] checking for lstat... yes [ 248s] checking for lutimes... yes [ 249s] checking for mbrtowc... yes [ 249s] checking for memmove... yes [ 249s] checking for memset... yes [ 249s] checking for mkdir... yes [ 250s] checking for mkfifo... yes [ 250s] checking for mknod... yes [ 250s] checking for mkstemp... yes [ 250s] checking for nl_langinfo... yes [ 251s] checking for openat... yes [ 251s] checking for pipe... yes [ 251s] checking for poll... yes [ 251s] checking for posix_spawnp... yes [ 252s] checking for readlink... yes [ 252s] checking for readlinkat... yes [ 252s] checking for readpassphrase... no [ 252s] checking for select... yes [ 253s] checking for setenv... yes [ 253s] checking for setlocale... yes [ 253s] checking for sigaction... yes [ 253s] checking for statfs... yes [ 254s] checking for statvfs... yes [ 254s] checking for strchr... yes [ 254s] checking for strdup... yes [ 254s] checking for strerror... yes [ 255s] checking for strncpy_s... no [ 255s] checking for strnlen... yes [ 255s] checking for strrchr... yes [ 255s] checking for symlink... yes [ 256s] checking for timegm... yes [ 256s] checking for tzset... yes [ 256s] checking for unlinkat... yes [ 256s] checking for unsetenv... yes [ 257s] checking for utime... yes [ 257s] checking for utimensat... yes [ 257s] checking for utimes... yes [ 257s] checking for vfork... yes [ 258s] checking for wcrtomb... yes [ 258s] checking for wcscmp... yes [ 258s] checking for wcscpy... yes [ 258s] checking for wcslen... yes [ 258s] checking for wctomb... yes [ 259s] checking for wmemcmp... yes [ 259s] checking for wmemcpy... yes [ 259s] checking for wmemmove... yes [ 259s] checking for _fseeki64... no [ 260s] checking for _get_timezone... no [ 260s] checking whether cmtime_s is declared... no [ 260s] checking whether gmtime_s is declared... no [ 261s] checking for localtime_s... no [ 261s] checking whether _mkgmtime is declared... no [ 261s] checking for cygwin_conv_path... no [ 261s] checking for struct vfsconf... no [ 261s] checking for struct xvfsconf... no [ 262s] checking for struct statfs... no [ 262s] checking whether D_MD_ORDER is declared... no [ 263s] checking for struct dirent.d_namlen... no [ 263s] checking for library containing setxattr... none required [ 263s] checking whether EXTATTR_NAMESPACE_USER is declared... no [ 264s] checking whether XATTR_NOFOLLOW is declared... no [ 264s] checking for fgetxattr... yes [ 264s] checking for flistxattr... yes [ 264s] checking for fsetxattr... yes [ 265s] checking for getxattr... yes [ 265s] checking for lgetxattr... yes [ 265s] checking for listxattr... yes [ 266s] checking for llistxattr... yes [ 266s] checking for lsetxattr... yes [ 266s] checking for extended attributes support... Linux [ 266s] checking for acl_get_file in -lacl... yes [ 267s] checking for acl_t... yes [ 267s] checking for acl_entry_t... yes [ 267s] checking for acl_permset_t... yes [ 268s] checking for acl_tag_t... yes [ 268s] checking for richacl_get_file in -lrichacl... no [ 268s] checking for struct richace... no [ 268s] checking for struct richacl... no [ 268s] checking for acl... no [ 269s] checking for facl... no [ 269s] checking for acl_add_perm... yes [ 269s] checking for acl_clear_perms... yes [ 270s] checking for acl_create_entry... yes [ 270s] checking for acl_delete_def_file... yes [ 270s] checking for acl_free... yes [ 271s] checking for acl_get_entry... yes [ 271s] checking for acl_get_fd... yes [ 271s] checking for acl_get_file... yes [ 272s] checking for acl_get_permset... yes [ 272s] checking for acl_get_qualifier... yes [ 273s] checking for acl_get_tag_type... yes [ 273s] checking for acl_init... yes [ 273s] checking for acl_set_fd... yes [ 274s] checking for acl_set_file... yes [ 274s] checking for acl_set_qualifier... yes [ 274s] checking for acl_set_tag_type... yes [ 274s] checking for acl_get_perm... yes [ 274s] checking for ACL support... libacl (POSIX.1e) [ 274s] checking for special C compiler options needed for large files... no [ 274s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 275s] checking support for ARCHIVE_CRYPTO_MD5_LIBC... no [ 275s] checking support for ARCHIVE_CRYPTO_MD5_LIBSYSTEM... no [ 275s] checking support for ARCHIVE_CRYPTO_RMD160_LIBC... no [ 276s] checking support for ARCHIVE_CRYPTO_SHA1_LIBC... no [ 276s] checking support for ARCHIVE_CRYPTO_SHA1_LIBSYSTEM... no [ 276s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC... no [ 276s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC2... no [ 277s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC3... no [ 277s] checking support for ARCHIVE_CRYPTO_SHA256_LIBSYSTEM... no [ 277s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC... no [ 278s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC2... no [ 278s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC3... no [ 278s] checking support for ARCHIVE_CRYPTO_SHA384_LIBSYSTEM... no [ 279s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC... no [ 279s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC2... no [ 279s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC3... no [ 280s] checking support for ARCHIVE_CRYPTO_SHA512_LIBSYSTEM... no [ 280s] checking for bcrypt.h... no [ 280s] checking for openssl/evp.h... yes [ 280s] checking for OPENSSL_config in -lcrypto... yes [ 281s] checking support for ARCHIVE_CRYPTO_MD5_OPENSSL... yes [ 282s] checking support for ARCHIVE_CRYPTO_RMD160_OPENSSL... yes [ 282s] checking support for ARCHIVE_CRYPTO_SHA1_OPENSSL... yes [ 283s] checking support for ARCHIVE_CRYPTO_SHA256_OPENSSL... yes [ 283s] checking support for ARCHIVE_CRYPTO_SHA384_OPENSSL... yes [ 284s] checking support for ARCHIVE_CRYPTO_SHA512_OPENSSL... yes [ 284s] checking for PKCS5_PBKDF2_HMAC_SHA1... yes [ 284s] checking for md5.h... no [ 285s] checking for ripemd.h... no [ 285s] checking for sha.h... no [ 285s] checking for sha256.h... no [ 285s] checking for sha512.h... no [ 286s] checking for MD5Init in -lmd... no [ 286s] checking whether compiler supports visibility annotations... yes [ 286s] checking that generated files are newer than configure... done [ 286s] configure: creating ./config.status [ 293s] config.status: creating Makefile [ 293s] config.status: creating build/pkgconfig/libarchive.pc [ 293s] config.status: creating config.h [ 293s] config.status: executing depfiles commands [ 324s] config.status: executing libtool commands [ 324s] config.status: executing mkdirs commands [ 324s] + /bin/make -j12 [ 324s] /bin/mkdir -p libarchive/test [ 324s] /bin/mkdir -p tar/test [ 324s] cat ./libarchive/test/test_*.c | grep '^DEFINE_TEST' > libarchive/test/list.h [ 324s] /bin/mkdir -p cpio/test [ 324s] cat ./tar/test/test_*.c | grep '^DEFINE_TEST' > tar/test/list.h [ 324s] /bin/mkdir -p cat/test [ 324s] cat ./cpio/test/test_*.c | grep '^DEFINE_TEST' > cpio/test/list.h [ 324s] cat ./cat/test/test_*.c | grep '^DEFINE_TEST' > cat/test/list.h [ 324s] /bin/mkdir -p unzip/test [ 324s] cat ./unzip/test/test_*.c | grep '^DEFINE_TEST' > unzip/test/list.h [ 325s] /bin/make all-am [ 325s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.7.2' [ 325s] CC tar/bsdtar-bsdtar.o [ 325s] CC tar/bsdtar-cmdline.o [ 325s] CC tar/bsdtar-creation_set.o [ 325s] CC tar/bsdtar-read.o [ 325s] CC tar/bsdtar-subst.o [ 325s] CC tar/bsdtar-util.o [ 325s] CC tar/bsdtar-write.o [ 325s] CC libarchive/archive_acl.lo [ 325s] CC libarchive/archive_check_magic.lo [ 325s] CC libarchive/archive_cmdline.lo [ 325s] CC libarchive/archive_cryptor.lo [ 325s] CC libarchive/archive_digest.lo [ 325s] CC libarchive/archive_entry.lo [ 325s] CC libarchive/archive_entry_copy_stat.lo [ 325s] CC libarchive/archive_entry_link_resolver.lo [ 325s] CC libarchive/archive_entry_sparse.lo [ 325s] CC libarchive/archive_entry_stat.lo [ 325s] CC libarchive/archive_entry_strmode.lo [ 325s] CC libarchive/archive_entry_xattr.lo [ 325s] CC libarchive/archive_getdate.lo [ 325s] CC libarchive/archive_hmac.lo [ 326s] CC libarchive/archive_match.lo [ 326s] CC libarchive/archive_options.lo [ 326s] CC libarchive/archive_pack_dev.lo [ 326s] CC libarchive/archive_pathmatch.lo [ 326s] CC libarchive/archive_ppmd7.lo [ 326s] CC libarchive/archive_ppmd8.lo [ 326s] CC libarchive/archive_random.lo [ 326s] CC libarchive/archive_rb.lo [ 326s] CC libarchive/archive_read.lo [ 326s] CC libarchive/archive_read_add_passphrase.lo [ 326s] CC libarchive/archive_read_append_filter.lo [ 326s] CC libarchive/archive_read_data_into_fd.lo [ 326s] CC libarchive/archive_read_disk_entry_from_file.lo [ 326s] CC libarchive/archive_read_disk_posix.lo [ 326s] CC libarchive/archive_read_disk_set_standard_lookup.lo [ 326s] CC libarchive/archive_read_extract.lo [ 326s] CC libarchive/archive_read_extract2.lo [ 327s] CC libarchive/archive_read_open_fd.lo [ 327s] CC libarchive/archive_read_open_file.lo [ 327s] CC libarchive/archive_read_open_filename.lo [ 327s] CC libarchive/archive_read_open_memory.lo [ 327s] CC libarchive/archive_read_set_format.lo [ 327s] CC libarchive/archive_read_set_options.lo [ 327s] CC libarchive/archive_read_support_filter_all.lo [ 327s] CC libarchive/archive_read_support_filter_bzip2.lo [ 327s] CC libarchive/archive_read_support_filter_by_code.lo [ 327s] CC libarchive/archive_read_support_filter_compress.lo [ 327s] CC libarchive/archive_read_support_filter_grzip.lo [ 327s] CC libarchive/archive_read_support_filter_gzip.lo [ 327s] CC libarchive/archive_read_support_filter_lrzip.lo [ 327s] CC libarchive/archive_read_support_filter_lz4.lo [ 327s] CC libarchive/archive_read_support_filter_lzop.lo [ 327s] CC libarchive/archive_read_support_filter_none.lo [ 327s] CC libarchive/archive_read_support_filter_program.lo [ 327s] CC libarchive/archive_read_support_filter_rpm.lo [ 327s] CC libarchive/archive_read_support_filter_uu.lo [ 327s] CC libarchive/archive_read_support_filter_xz.lo [ 327s] CC libarchive/archive_read_support_filter_zstd.lo [ 328s] CC libarchive/archive_read_support_format_7zip.lo [ 328s] CC libarchive/archive_read_support_format_all.lo [ 328s] CC libarchive/archive_read_support_format_ar.lo [ 328s] CC libarchive/archive_read_support_format_by_code.lo [ 328s] CC libarchive/archive_read_support_format_cab.lo [ 328s] CC libarchive/archive_read_support_format_cpio.lo [ 328s] CC libarchive/archive_read_support_format_empty.lo [ 328s] CC libarchive/archive_read_support_format_iso9660.lo [ 328s] CC libarchive/archive_read_support_format_lha.lo [ 328s] CC libarchive/archive_read_support_format_mtree.lo [ 328s] CC libarchive/archive_read_support_format_rar.lo [ 328s] CC libarchive/archive_read_support_format_rar5.lo [ 328s] CC libarchive/archive_read_support_format_raw.lo [ 328s] CC libarchive/archive_read_support_format_tar.lo [ 328s] CC libarchive/archive_read_support_format_warc.lo [ 328s] CC libarchive/archive_read_support_format_xar.lo [ 329s] CC libarchive/archive_read_support_format_zip.lo [ 329s] CC libarchive/archive_string.lo [ 329s] CC libarchive/archive_string_sprintf.lo [ 329s] CC libarchive/archive_util.lo [ 329s] CC libarchive/archive_version_details.lo [ 329s] CC libarchive/archive_virtual.lo [ 329s] CC libarchive/archive_write.lo [ 330s] CC libarchive/archive_write_disk_posix.lo [ 330s] CC libarchive/archive_write_disk_set_standard_lookup.lo [ 330s] CC libarchive/archive_write_open_fd.lo [ 330s] CC libarchive/archive_write_open_file.lo [ 330s] CC libarchive/archive_write_open_filename.lo [ 330s] CC libarchive/archive_write_open_memory.lo [ 330s] CC libarchive/archive_write_add_filter.lo [ 330s] CC libarchive/archive_write_add_filter_b64encode.lo [ 330s] CC libarchive/archive_write_add_filter_by_name.lo [ 330s] CC libarchive/archive_write_add_filter_bzip2.lo [ 330s] CC libarchive/archive_write_add_filter_compress.lo [ 330s] CC libarchive/archive_write_add_filter_grzip.lo [ 330s] CC libarchive/archive_write_add_filter_gzip.lo [ 330s] CC libarchive/archive_write_add_filter_lrzip.lo [ 330s] CC libarchive/archive_write_add_filter_lz4.lo [ 330s] CC libarchive/archive_write_add_filter_lzop.lo [ 330s] CC libarchive/archive_write_add_filter_none.lo [ 331s] CC libarchive/archive_write_add_filter_program.lo [ 331s] CC libarchive/archive_write_add_filter_uuencode.lo [ 331s] CC libarchive/archive_write_add_filter_xz.lo [ 331s] CC libarchive/archive_write_add_filter_zstd.lo [ 331s] CC libarchive/archive_write_set_format.lo [ 331s] CC libarchive/archive_write_set_format_7zip.lo [ 331s] CC libarchive/archive_write_set_format_ar.lo [ 331s] CC libarchive/archive_write_set_format_by_name.lo [ 331s] CC libarchive/archive_write_set_format_cpio.lo [ 331s] CC libarchive/archive_write_set_format_cpio_binary.lo [ 331s] CC libarchive/archive_write_set_format_cpio_newc.lo [ 331s] CC libarchive/archive_write_set_format_cpio_odc.lo [ 331s] CC libarchive/archive_write_set_format_filter_by_ext.lo [ 331s] CC libarchive/archive_write_set_format_iso9660.lo [ 331s] CC libarchive/archive_write_set_format_mtree.lo [ 331s] CC libarchive/archive_write_set_format_pax.lo [ 331s] CC libarchive/archive_write_set_format_raw.lo [ 331s] CC libarchive/archive_write_set_format_shar.lo [ 331s] CC libarchive/archive_write_set_format_ustar.lo [ 331s] CC libarchive/archive_write_set_format_v7tar.lo [ 331s] CC libarchive/archive_write_set_format_gnutar.lo [ 332s] CC libarchive/archive_write_set_format_warc.lo [ 332s] CC libarchive/archive_write_set_format_xar.lo [ 332s] CC libarchive/archive_write_set_format_zip.lo [ 332s] CC libarchive/archive_write_set_options.lo [ 332s] CC libarchive/archive_write_set_passphrase.lo [ 332s] CC libarchive/filter_fork_posix.lo [ 332s] CC libarchive/xxhash.lo [ 332s] CC libarchive/archive_blake2s_ref.lo [ 332s] CC libarchive/archive_blake2sp_ref.lo [ 332s] CC libarchive/archive_disk_acl_linux.lo [ 332s] CC libarchive_fe/la-err.lo [ 332s] CC libarchive_fe/la-line_reader.lo [ 332s] CC libarchive_fe/la-passphrase.lo [ 333s] CC cpio/bsdcpio-cmdline.o [ 333s] CC cpio/bsdcpio-cpio.o [ 333s] CC cat/bsdcat-bsdcat.o [ 333s] CC cat/bsdcat-cmdline.o [ 333s] CC unzip/bsdunzip-bsdunzip.o [ 333s] CC unzip/bsdunzip-cmdline.o [ 333s] CC unzip/bsdunzip-la_getline.o [ 333s] CCLD libarchive_fe.la [ 334s] CCLD libarchive.la [ 335s] CCLD bsdtar [ 335s] CCLD bsdcpio [ 335s] CCLD bsdcat [ 335s] CCLD bsdunzip [ 336s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.7.2' [ 336s] + exit 0 [ 336s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.AvGEqK [ 336s] + umask 022 [ 336s] + cd /home/abuild/rpmbuild/BUILD [ 336s] + cd libarchive-3.7.2 [ 336s] + LANG=C [ 336s] + export LANG [ 336s] + unset DISPLAY [ 336s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 [ 336s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 [ 336s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 install [ 336s] /bin/make install-am [ 336s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.7.2' [ 336s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.7.2' [ 336s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64' [ 336s] /bin/sh ./libtool --mode=install /bin/install -c libarchive.la '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64' [ 336s] libtool: install: /bin/install -c .libs/libarchive.so.13.7.2 /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64/libarchive.so.13.7.2 [ 336s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64 && { ln -s -f libarchive.so.13.7.2 libarchive.so.13 || { rm -f libarchive.so.13 && ln -s libarchive.so.13.7.2 libarchive.so.13; }; }) [ 336s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64 && { ln -s -f libarchive.so.13.7.2 libarchive.so || { rm -f libarchive.so && ln -s libarchive.so.13.7.2 libarchive.so; }; }) [ 336s] libtool: install: /bin/install -c .libs/libarchive.lai /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64/libarchive.la [ 337s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 337s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin' [ 337s] /bin/sh ./libtool --mode=install /bin/install -c bsdtar bsdcpio bsdcat bsdunzip '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin' [ 337s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib64' [ 337s] libtool: install: /bin/install -c .libs/bsdtar /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdtar [ 337s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib64' [ 337s] libtool: install: /bin/install -c .libs/bsdcpio /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdcpio [ 337s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib64' [ 337s] libtool: install: /bin/install -c .libs/bsdcat /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdcat [ 337s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib64' [ 337s] libtool: install: /bin/install -c .libs/bsdunzip /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdunzip [ 337s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/include' [ 337s] /bin/install -c -m 644 libarchive/archive.h libarchive/archive_entry.h '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/include' [ 337s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64/pkgconfig' [ 337s] /bin/install -c -m 644 build/pkgconfig/libarchive.pc '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64/pkgconfig' [ 337s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.7.2' [ 337s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.7.2' [ 337s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/info/dir [ 337s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 -regex '.*\.la$' [ 337s] + xargs rm -f -- [ 337s] + xargs rm -f -- [ 337s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 -regex '.*\.a$' [ 337s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 -name cpio.5 -exec rm -f '{}' ';' [ 337s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 -name mtree.5 -exec rm -f '{}' ';' [ 337s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 -name tar.5 -exec rm -f '{}' ';' [ 337s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.7.2-1.10 --unique-debug-src-base libarchive-3.7.2-1.10.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libarchive-3.7.2 [ 338s] 1+0 records in [ 338s] 1+0 records out [ 338s] 1+0 records in [ 338s] 1+0 records out [ 338s] 1+0 records in [ 338s] 1+0 records out [ 338s] 1+0 records in [ 338s] 1+0 records out [ 338s] 1+0 records in [ 338s] 1+0 records out [ 338s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdtar [ 338s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdcat [ 338s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdcpio [ 338s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/lib64/libarchive.so.13.7.2 [ 338s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/bin/bsdunzip [ 339s] 0+0 records in [ 339s] 0+0 records out [ 339s] 0+0 records in [ 339s] 0+0 records out [ 339s] 0+0 records in [ 339s] 0+0 records out [ 339s] 0+0 records in [ 339s] 0+0 records out [ 339s] 0+0 records in [ 339s] 0+0 records out [ 339s] 6958 blocks [ 339s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libarchive-3.7.2/libarchive-debuginfo.manifest [ 339s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libarchive-3.7.2/libarchive-debugsource.manifest [ 339s] + /usr/lib/rpm/check-buildroot [ 340s] + /usr/lib/rpm//brp-compress [ 340s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 342s] + /usr/lib/rpm/brp-python-hardlink [ 342s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 [ 342s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libarchive-3.7.2/isu.list [ 342s] ~/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 ~/rpmbuild/BUILD/libarchive-3.7.2 [ 342s] ~/rpmbuild/BUILD/libarchive-3.7.2 [ 342s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 344s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.x1JNwJ [ 344s] + umask 022 [ 344s] + cd /home/abuild/rpmbuild/BUILD [ 344s] + cd libarchive-3.7.2 [ 344s] + exit 0 [ 344s] Processing files: libarchive-3.7.2-1.10.aarch64 [ 344s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 344s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 344s] [ 344s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TyE8M5 [ 344s] + umask 022 [ 344s] + cd /home/abuild/rpmbuild/BUILD [ 344s] + cd libarchive-3.7.2 [ 344s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/licenses/libarchive [ 344s] + export LC_ALL=C [ 344s] + LC_ALL=C [ 344s] + export LICENSEDIR [ 344s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/licenses/libarchive [ 344s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/licenses/libarchive [ 344s] + exit 0 [ 344s] Provides: libarchive = 3.7.2-1.10 libarchive(aarch-64) = 3.7.2-1.10 libarchive.so.13()(64bit) [ 344s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 344s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 344s] Requires(post): /sbin/ldconfig [ 344s] Requires(postun): /sbin/ldconfig [ 344s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libacl.so.1()(64bit) libacl.so.1(ACL_1.0)(64bit) libbz2.so.1()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.28)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.36)(64bit) libc.so.6(GLIBC_2.38)(64bit) libcrypto.so.3()(64bit) libcrypto.so.3(OPENSSL_3.0.0)(64bit) liblzma.so.5()(64bit) liblzma.so.5(XZ_5.0)(64bit) liblzma.so.5(XZ_5.2)(64bit) libm.so.6()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.5.0)(64bit) libxml2.so.2(LIBXML2_2.5.2)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.5)(64bit) libz.so.1()(64bit) [ 344s] Processing files: libarchive-debugsource-3.7.2-1.10.aarch64 [ 344s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 344s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 344s] [ 344s] Provides: libarchive-debugsource = 3.7.2-1.10 libarchive-debugsource(aarch-64) = 3.7.2-1.10 [ 344s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 344s] Processing files: libarchive-tools-3.7.2-1.10.aarch64 [ 344s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 344s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 344s] [ 344s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.LK6tXd [ 344s] + umask 022 [ 344s] + cd /home/abuild/rpmbuild/BUILD [ 344s] + cd libarchive-3.7.2 [ 344s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/licenses/libarchive-tools [ 344s] + export LC_ALL=C [ 344s] + LC_ALL=C [ 344s] + export LICENSEDIR [ 344s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/licenses/libarchive-tools [ 344s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64/usr/share/licenses/libarchive-tools [ 344s] + exit 0 [ 345s] Provides: libarchive-tools = 3.7.2-1.10 libarchive-tools(aarch-64) = 3.7.2-1.10 [ 345s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 345s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libarchive.so.13()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.38)(64bit) [ 345s] Processing files: libarchive-devel-3.7.2-1.10.aarch64 [ 345s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 345s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 345s] [ 345s] Provides: libarchive-devel = 3.7.2-1.10 libarchive-devel(aarch-64) = 3.7.2-1.10 pkgconfig(libarchive) = 3.7.2 [ 345s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 345s] Requires: /usr/bin/pkg-config libarchive.so.13()(64bit) [ 345s] Processing files: libarchive-debuginfo-3.7.2-1.10.aarch64 [ 345s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 345s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 345s] [ 345s] Provides: libarchive-debuginfo = 3.7.2-1.10 libarchive-debuginfo(aarch-64) = 3.7.2-1.10 [ 345s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 345s] Recommends: libarchive-debugsource(aarch-64) = 3.7.2-1.10 [ 345s] Processing files: libarchive-tools-debuginfo-3.7.2-1.10.aarch64 [ 345s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 345s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 345s] [ 345s] Provides: libarchive-tools-debuginfo = 3.7.2-1.10 libarchive-tools-debuginfo(aarch-64) = 3.7.2-1.10 [ 345s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 345s] Recommends: libarchive-debugsource(aarch-64) = 3.7.2-1.10 [ 345s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 [ 345s] Wrote: /home/abuild/rpmbuild/SRPMS/libarchive-3.7.2-1.10.src.rpm [ 346s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libarchive-3.7.2-1.10.aarch64.rpm [ 348s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libarchive-debugsource-3.7.2-1.10.aarch64.rpm [ 348s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libarchive-tools-3.7.2-1.10.aarch64.rpm [ 348s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libarchive-devel-3.7.2-1.10.aarch64.rpm [ 350s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libarchive-debuginfo-3.7.2-1.10.aarch64.rpm [ 350s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libarchive-tools-debuginfo-3.7.2-1.10.aarch64.rpm [ 350s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DnpjF3 [ 350s] + umask 022 [ 350s] + cd /home/abuild/rpmbuild/BUILD [ 350s] + cd libarchive-3.7.2 [ 350s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.7.2-1.10.aarch64 [ 350s] + exit 0 [ 351s] ... checking for files with abuild user/group [ 351s] ... creating baselibs [ 352s] [ 352s] 58ddb04e8dc7 finished "build libarchive.spec" at Fri Dec 27 07:37:15 UTC 2024. [ 352s]