[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 0s] [ 0s] 9cdcada75fd1 started "build perl-PerlIO-gzip.spec" at Thu Dec 26 04:49:59 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-Base' repository 'standard' arch 'riscv64' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/perl-PerlIO-gzip.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/27/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 2s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/42] preinstalling libmagic-data... [ 5s] [2/42] preinstalling libncurses... [ 5s] [3/42] preinstalling setup... [ 5s] [4/42] preinstalling filesystem... [ 6s] [5/42] preinstalling glibc... [ 6s] [6/42] preinstalling bash... [ 7s] [7/42] preinstalling diffutils... [ 7s] [8/42] preinstalling grep... [ 7s] [9/42] preinstalling libattr... [ 7s] [10/42] preinstalling libblkid... [ 7s] [11/42] preinstalling libbz2... [ 8s] [12/42] preinstalling libfreebl3... [ 8s] [13/42] preinstalling libgcc... [ 8s] [14/42] preinstalling liblua... [ 8s] [15/42] preinstalling liblzma... [ 8s] [16/42] preinstalling libpopt... [ 9s] [17/42] preinstalling libreadline... [ 9s] [18/42] preinstalling libsmack... [ 9s] [19/42] preinstalling libsqlite... [ 9s] [20/42] preinstalling libuuid... [ 10s] [21/42] preinstalling libxcrypt... [ 10s] [22/42] preinstalling libzstd1... [ 10s] [23/42] preinstalling nspr... [ 10s] [24/42] preinstalling sed... [ 11s] [25/42] preinstalling zlib... [ 11s] [26/42] preinstalling qemu-accel-x86_64-riscv64... [ 38s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 44s] [28/42] preinstalling coreutils... [ 45s] [29/42] preinstalling libacl... [ 45s] [30/42] preinstalling libcap... [ 45s] [31/42] preinstalling libelf... [ 45s] [32/42] preinstalling libmount... [ 45s] [33/42] preinstalling smack... [ 45s] [34/42] preinstalling bzip2... [ 45s] [35/42] preinstalling libmagic... [ 45s] [36/42] preinstalling libxml2... [ 45s] [37/42] preinstalling tar... [ 46s] [38/42] preinstalling util-linux... [ 46s] [39/42] preinstalling util-linux-su... [ 46s] [40/42] preinstalling nss... [ 46s] [41/42] preinstalling libsoftokn3... [ 47s] [42/42] preinstalling rpm... [ 48s] running qemu-linux-user-x86_64-cross postinstall script [ 48s] running qemu-accel-x86_64-riscv64 postinstall script [ 48s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 48s] running setup postinstall script [ 48s] chroot: failed to run command '': No such file or directory [ 48s] initializing rpm db... [ 49s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 49s] breaking dependency libxcrypt-devel -> glibc-devel [ 49s] cycle: libsoftokn3 -> nss [ 49s] breaking dependency nss -> libsoftokn3 [ 49s] done [ 49s] querying package ids... [ 51s] [1/99] cumulate libmagic-data-5.45-1.7 [ 51s] [2/99] cumulate setup-0.9-1.3 [ 51s] [3/99] cumulate filesystem-3.1-1.1 [ 51s] [4/99] cumulate glibc-2.39-1.10 [ 51s] [5/99] cumulate bash-3.2.57-1.1 [ 51s] [6/99] cumulate cpio-2.8-1.1 [ 51s] [7/99] cumulate diffutils-3.10-1.1 [ 51s] [8/99] cumulate findutils-4.3.8-1.7 [ 51s] [9/99] cumulate gdbm-1.8.3-1.10 [ 51s] [10/99] cumulate hostname-3.23-1.1 [ 51s] [11/99] cumulate libatomic-14.2.0-1.9 [ 51s] [12/99] cumulate libattr-2.5.1-1.8 [ 51s] [13/99] cumulate libblkid-2.39.3-1.7 [ 51s] [14/99] cumulate libbz2-1.0.8-1.9 [ 51s] [15/99] cumulate libfreebl3-3.98-1.11 [ 51s] [16/99] cumulate libgcc-14.2.0-1.9 [ 51s] [17/99] cumulate libgomp-14.2.0-1.9 [ 51s] [18/99] cumulate libitm-14.2.0-1.9 [ 51s] [19/99] cumulate libltdl-2.4.7-1.10 [ 51s] [20/99] cumulate liblua-5.1.5-1.7 [ 51s] [21/99] cumulate liblzma-5.6.3-1.2 [ 51s] [22/99] cumulate libopenssl3-3.0.13-1.10 [ 51s] [23/99] cumulate libpcre-8.45-1.7 [ 51s] [24/99] cumulate libpopt-1.16-1.7 [ 51s] [25/99] cumulate libsmack-1.3.1-1.7 [ 51s] [26/99] cumulate libsmartcols-2.39.3-1.7 [ 51s] [27/99] cumulate libsqlite-3.48.0-1.4 [ 51s] [28/99] cumulate libuuid-2.39.3-1.7 [ 51s] [29/99] cumulate libxcrypt-4.4.36-1.9 [ 51s] [30/99] cumulate libzstd1-1.5.6-1.3 [ 51s] [31/99] cumulate m4-1.4.19-1.1 [ 51s] [32/99] cumulate net-tools-2.0_20121208git-1.6 [ 51s] [33/99] cumulate nspr-4.35-1.7 [ 51s] [34/99] cumulate patch-2.7.6-1.7 [ 51s] [35/99] cumulate pkg-config-0.29.2-1.9 [ 51s] [36/99] cumulate sed-4.1c-1.7 [ 51s] [37/99] cumulate update-alternatives-1.22.2-1.1 [ 51s] [38/99] cumulate which-2.17-1.1 [ 51s] [39/99] cumulate zlib-1.3.1-1.3 [ 51s] [40/99] cumulate build-compare-2023.06.18-1.4 [ 51s] [41/99] cumulate hal-rootstrap-checker-0.1.0-2.1 [ 51s] [42/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-21.4 [ 51s] [43/99] cumulate binutils-libs-2.43-1.10 [ 51s] [44/99] cumulate coreutils-6.9-14.2 [ 51s] [45/99] cumulate cpp-14.2.0-1.9 [ 51s] [46/99] cumulate gawk-3.1.5-1.1 [ 51s] [47/99] cumulate gcc-c++-14.2.0-1.9 [ 51s] [48/99] cumulate grep-2.5.2-1.7 [ 51s] [49/99] cumulate libacl-2.3.2-1.7 [ 51s] [50/99] cumulate libcap-2.69-1.9 [ 51s] [51/99] cumulate libelf-0.189-1.9 [ 51s] [52/99] cumulate libgfortran-14.2.0-1.9 [ 51s] [53/99] cumulate libmount-2.39.3-1.7 [ 51s] [54/99] cumulate libstdc++-14.2.0-1.9 [ 51s] [55/99] cumulate make-4.4-1.7 [ 51s] [56/99] cumulate nss-certs-3.98-1.11 [ 51s] [57/99] cumulate smack-1.3.1-1.7 [ 51s] [58/99] cumulate bzip2-1.0.8-1.9 [ 51s] [59/99] cumulate libfdisk-2.39.3-1.7 [ 51s] [60/99] cumulate libmagic-5.45-1.7 [ 51s] [61/99] cumulate libxml2-2.12.5-1.8 [ 51s] [62/99] cumulate xz-5.6.3-1.2 [ 51s] [63/99] cumulate perl-5.38.0-1.9 [ 51s] [64/99] cumulate build-mkbaselibs-20120927-1.1 [ 51s] [65/99] cumulate libstdc++-devel-14.2.0-1.9 [ 51s] [66/99] cumulate linux-glibc-devel-6.6-1.9 [ 51s] [67/99] cumulate binutils-2.43-1.10 [ 51s] [68/99] cumulate file-5.45-1.7 [ 51s] [69/99] cumulate tar-1.17-1.1 [ 51s] [70/99] cumulate terminfo-base-full-6.4-1.10 [ 51s] [71/99] cumulate autoconf-2.71-1.10 [ 51s] [72/99] cumulate glibc-locale-2.39-1.10 [ 51s] [73/99] cumulate gzip-1.3.12-1.7 [ 51s] [74/99] cumulate libcc1-14.2.0-1.9 [ 51s] [75/99] cumulate libubsan-14.2.0-1.9 [ 51s] [76/99] cumulate pam-1.1.6-1.7 [ 51s] [77/99] cumulate tzdata-2023c-1.1 [ 51s] [78/99] cumulate libdw-0.189-1.9 [ 51s] [79/99] cumulate libarchive-3.7.2-1.8 [ 51s] [80/99] cumulate automake-1.16.5-1.10 [ 51s] [81/99] cumulate libasm-0.189-1.9 [ 51s] [82/99] cumulate libncurses6-6.4-1.10 [ 51s] [83/99] cumulate build-20120927-1.1 [ 51s] [84/99] cumulate gcc-14.2.0-1.9 [ 51s] [85/99] cumulate libncurses-6.4-1.10 [ 51s] [86/99] cumulate less-668-1.1 [ 51s] [87/99] cumulate libreadline-5.2-1.9 [ 51s] [88/99] cumulate qemu-accel-x86_64-riscv64-0.4-1.4 [ 51s] [89/99] cumulate libtool-2.4.7-1.10 [ 51s] [90/99] cumulate elfutils-0.189-1.9 [ 51s] [91/99] cumulate util-linux-2.39.3-1.7 [ 51s] [92/99] cumulate util-linux-su-2.39.3-1.7 [ 51s] [93/99] cumulate libxcrypt-devel-4.4.36-1.9 [ 51s] [94/99] cumulate nss-3.98-1.11 [ 51s] [95/99] cumulate glibc-devel-2.39-1.10 [ 51s] [96/99] cumulate libsoftokn3-3.98-1.11 [ 51s] [97/99] cumulate rpm-4.14.1.1-1.10 [ 51s] [98/99] cumulate zlib-devel-1.3.1-1.3 [ 51s] [99/99] cumulate rpm-build-4.14.1.1-1.10 [ 51s] now installing cumulated packages [ 52s] Preparing... ######################################## [ 52s] Updating / installing... [ 52s] setup-0.9-1.3 ######################################## [ 52s] filesystem-3.1-1.1 ######################################## [ 53s] glibc-2.39-1.10 ######################################## [ 54s] bash-3.2.57-1.1 ######################################## [ 54s] zlib-1.3.1-1.3 ######################################## [ 54s] coreutils-6.9-14.2 ######################################## [ 55s] libgcc-14.2.0-1.9 ######################################## [ 55s] libstdc++-14.2.0-1.9 ######################################## [ 55s] libbz2-1.0.8-1.9 ######################################## [ 55s] liblzma-5.6.3-1.2 ######################################## [ 56s] libelf-0.189-1.9 ######################################## [ 56s] libdw-0.189-1.9 ######################################## [ 56s] libxcrypt-4.4.36-1.9 ######################################## [ 56s] libblkid-2.39.3-1.7 ######################################## [ 57s] nspr-4.35-1.7 ######################################## [ 57s] pam-1.1.6-1.7 ######################################## [ 57s] libcap-2.69-1.9 ######################################## [ 57s] libfreebl3-3.98-1.11 ######################################## [ 58s] liblua-5.1.5-1.7 ######################################## [ 58s] libpopt-1.16-1.7 ######################################## [ 58s] libuuid-2.39.3-1.7 ######################################## [ 58s] libzstd1-1.5.6-1.3 ######################################## [ 59s] pkg-config-0.29.2-1.9 ######################################## [ 59s] libfdisk-2.39.3-1.7 ######################################## [ 59s] nss-certs-3.98-1.11 ######################################## [ 59s] libmount-2.39.3-1.7 ######################################## [ 59s] libasm-0.189-1.9 ######################################## [ 60s] libxml2-2.12.5-1.8 ######################################## [ 60s] xz-5.6.3-1.2 ######################################## [ 60s] bzip2-1.0.8-1.9 ######################################## [ 60s] libcc1-14.2.0-1.9 ######################################## [ 60s] libubsan-14.2.0-1.9 ######################################## [ 60s] libgfortran-14.2.0-1.9 ######################################## [ 61s] linux-glibc-devel-6.6-1.9 ######################################## [ 61s] terminfo-base-full-6.4-1.10 ######################################## [ 61s] libncurses6-6.4-1.10 ######################################## [ 62s] libreadline-5.2-1.9 ######################################## [ 62s] gzip-1.3.12-1.7 ######################################## [ 62s] binutils-libs-2.43-1.10 ######################################## [ 63s] binutils-2.43-1.10 ######################################## [ 63s] make-4.4-1.7 ######################################## [ 64s] findutils-4.3.8-1.7 ######################################## [ 64s] gdbm-1.8.3-1.10 ######################################## [ 69s] perl-5.38.0-1.9 ######################################## [ 69s] build-mkbaselibs-20120927-1.1 ######################################## [ 69s] libatomic-14.2.0-1.9 ######################################## [ 70s] libattr-2.5.1-1.8 ######################################## [ 70s] libacl-2.3.2-1.7 ######################################## [ 70s] tar-1.17-1.1 ######################################## [ 70s] libgomp-14.2.0-1.9 ######################################## [ 70s] libitm-14.2.0-1.9 ######################################## [ 74s] gcc-14.2.0-1.9 ######################################## [ 74s] libxcrypt-devel-4.4.36-1.9 ######################################## [ 75s] glibc-devel-2.39-1.10 ######################################## [ 75s] libltdl-2.4.7-1.10 ######################################## [ 75s] libopenssl3-3.0.13-1.10 ######################################## [ 76s] libarchive-3.7.2-1.8 ######################################## [ 76s] libpcre-8.45-1.7 ######################################## [ 76s] libsmack-1.3.1-1.7 ######################################## [ 76s] libsmartcols-2.39.3-1.7 ######################################## [ 77s] libsqlite-3.48.0-1.4 ######################################## [ 77s] libsoftokn3-3.98-1.11 ######################################## [ 78s] nss-3.98-1.11 ######################################## [ 78s] m4-1.4.19-1.1 ######################################## [ 78s] autoconf-2.71-1.10 ######################################## [ 79s] automake-1.16.5-1.10 ######################################## [ 79s] patch-2.7.6-1.7 ######################################## [ 79s] sed-4.1c-1.7 ######################################## [ 80s] util-linux-2.39.3-1.7 ######################################## [ 80s] libmagic-data-5.45-1.7 ######################################## [ 80s] libmagic-5.45-1.7 ######################################## [ 81s] rpm-4.14.1.1-1.10 ######################################## [ 82s] rpm-build-4.14.1.1-1.10 ######################################## [ 82s] file-5.45-1.7 ######################################## [ 82s] util-linux-su-2.39.3-1.7 ######################################## [ 82s] libtool-2.4.7-1.10 ######################################## [ 82s] smack-1.3.1-1.7 ######################################## [ 82s] grep-2.5.2-1.7 ######################################## [ 82s] zlib-devel-1.3.1-1.3 ######################################## [ 103s] qemu-accel-x86_64-riscv64-0.4-1.4 ######################################## [ 104s] build-20120927-1.1 ######################################## [ 104s] libncurses-6.4-1.10 ######################################## [ 104s] less-668-1.1 ######################################## [ 104s] elfutils-0.189-1.9 ######################################## [ 106s] libstdc++-devel-14.2.0-1.9 ######################################## [ 107s] glibc-locale-2.39-1.10 ######################################## [ 108s] tzdata-2023c-1.1 ######################################## [ 112s] cpp-14.2.0-1.9 ######################################## [ 116s] gcc-c++-14.2.0-1.9 ######################################## [ 116s] build-compare-2023.06.18-1.4 ######################################## [ 116s] hal-rootstrap-checker-0.1.0-2.1 ######################################## [ 124s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 125s] gawk-3.1.5-1.1 ######################################## [ 125s] cpio-2.8-1.1 ######################################## [ 125s] diffutils-3.10-1.1 ######################################## [ 125s] hostname-3.23-1.1 ######################################## [ 125s] net-tools-2.0_20121208git-1.6 ######################################## [ 125s] update-alternatives-1.22.2-1.1 ######################################## [ 125s] which-2.17-1.1 ######################################## [ 125s] now finalizing build dir... [ 126s] ----------------------------------------------------------------- [ 126s] I have the following modifications for perl-PerlIO-gzip.spec: [ 126s] 4c4 [ 126s] < Release: 1 [ 126s] --- [ 126s] > Release: 1.2 [ 127s] build target is riscv64-tizen-linux [ 127s] ----------------------------------------------------------------- [ 127s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 127s] ----------------------------------------------------------------- [ 127s] ----------------------------------------------------------------- [ 127s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 129s] Building target platforms: riscv64-tizen-linux [ 129s] Building for target riscv64-tizen-linux [ 129s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.AnQbnd [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + rm -rf perl-PerlIO-gzip-0.20 [ 129s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 129s] + /bin/tar -xof - [ 129s] + STATUS=0 [ 129s] + '[' 0 -ne 0 ']' [ 129s] + cd perl-PerlIO-gzip-0.20 [ 129s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 129s] + exit 0 [ 129s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kIMsdx [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd perl-PerlIO-gzip-0.20 [ 129s] + ref=/usr/lib/rpm [ 129s] + mints=0 [ 129s] + case $(uname -m) in [ 129s] ++ uname -m [ 129s] + mints=20160911 [ 129s] + for s in guess sub [ 129s] ++ find -maxdepth 8 -name config.guess [ 129s] + for s in guess sub [ 129s] ++ find -maxdepth 8 -name config.sub [ 129s] + LANG=C [ 129s] + export LANG [ 129s] + unset DISPLAY [ 129s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 129s] + export CFLAGS [ 129s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 129s] + export CXXFLAGS [ 129s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 129s] + export FFLAGS [ 129s] + LDFLAGS= [ 129s] + export LDFLAGS [ 129s] + perl Makefile.PL [ 131s] Checking if your kit is complete... [ 131s] Looks good [ 131s] Generating a Unix-style Makefile [ 131s] Writing Makefile for PerlIO::gzip [ 131s] Writing MYMETA.yml and MYMETA.json [ 131s] + make [ 134s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 134s] Running Mkbootstrap for gzip () [ 135s] chmod 644 "gzip.bs" [ 135s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 135s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 135s] mv gzip.xsc gzip.c [ 135s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE" gzip.c [ 135s] In file included from gzip.xs:13: [ 135s] /usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 135s] 1059 | #define PERL_USE_SAFE_PUTENV [ 135s] | ^~~~~~~~~~~~~~~~~~~~ [ 135s] : note: this is the location of the previous definition [ 136s] In file included from /usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE/perl.h:6227: [ 136s] gzip.xs: In function 'PerlIOGzip_getarg': [ 136s] /usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized [-Wmaybe-uninitialized] [ 136s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 136s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 136s] gzip.xs:697:8: note: in expansion of macro 'newSVpv' [ 136s] 697 | sv = newSVpv (mode, 4); [ 136s] | ^~~~~~~ [ 136s] gzip.xs:675:24: note: 'mode' was declared here [ 136s] 675 | register const char *mode; [ 136s] | ^~~~ [ 136s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 136s] LD_RUN_PATH="/lib64" cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 136s] -lz \ [ 136s] [ 136s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 137s] Manifying 1 pod document [ 137s] + exit 0 [ 137s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ifbtQM [ 137s] + umask 022 [ 137s] + cd /home/abuild/rpmbuild/BUILD [ 137s] + cd perl-PerlIO-gzip-0.20 [ 137s] + LANG=C [ 137s] + export LANG [ 137s] + unset DISPLAY [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 137s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 137s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 install_vendor [ 137s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 138s] Manifying 1 pod document [ 138s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 138s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 138s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO/gzip.pm [ 138s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/man/man3/PerlIO::gzip.3 [ 138s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/perllocal.pod [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/info [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/doc/packages [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/doc/perl-PerlIO-gzip [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/doc/perl-PerlIO-gzip-0.20 [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/gtk-doc [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/doc [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/man [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 -regex '.*/man/man./.*.[0-9]' [ 139s] + xargs rm -f -- [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 -regex '.*/man/../man./.*.[0-9]' [ 139s] + xargs rm -f -- [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 -regex '.*/man/man./.*.[0-9]pm' [ 139s] + xargs rm -f -- [ 139s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto -name .packlist -print0 [ 139s] + xargs -0 -r rm [ 139s] + '[' riscv64 == noarch ']' [ 139s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/perllocal.pod [ 139s] + FILES=perl-PerlIO-gzip.files [ 139s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 139s] + RES= [ 139s] + '[' -n '' ']' [ 139s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ [ 139s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d [ 139s] ++ sort [ 139s] + for dir in '`find ${base_dir} -type d | sort`' [ 139s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 139s] + continue [ 139s] + for dir in '`find ${base_dir} -type d | sort`' [ 139s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 139s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi [ 139s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 139s] + el=riscv64-linux-thread-multi [ 139s] + all_dir=(${all_dir[@]} $el) [ 139s] + for dir in '`find ${base_dir} -type d | sort`' [ 139s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 139s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 139s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO [ 139s] + el=riscv64-linux-thread-multi/PerlIO [ 139s] + all_dir=(${all_dir[@]} $el) [ 139s] + for dir in '`find ${base_dir} -type d | sort`' [ 139s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 139s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 139s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto [ 139s] + el=riscv64-linux-thread-multi/auto [ 139s] + all_dir=(${all_dir[@]} $el) [ 139s] + for dir in '`find ${base_dir} -type d | sort`' [ 139s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 139s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO [ 139s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 139s] + el=riscv64-linux-thread-multi/auto/PerlIO [ 139s] + all_dir=(${all_dir[@]} $el) [ 139s] + for dir in '`find ${base_dir} -type d | sort`' [ 139s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 139s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip [ 139s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 139s] + el=riscv64-linux-thread-multi/auto/PerlIO/gzip [ 139s] + all_dir=(${all_dir[@]} $el) [ 139s] + for i in '${all_dir[@]}' [ 139s] + '[' riscv64-linux-thread-multi = auto ']' [ 139s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 139s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi ']' [ 139s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi -maxdepth 1 -type f [ 139s] + RES= [ 139s] + '[' -n '' ']' [ 139s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi [ 139s] + /bin/cat [ 139s] + for i in '${all_dir[@]}' [ 139s] + '[' riscv64-linux-thread-multi/PerlIO = auto ']' [ 139s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 139s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO ']' [ 139s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 139s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO/gzip.pm [ 139s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO/gzip.pm ']' [ 139s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO [ 139s] + /bin/cat [ 139s] + for file in '$RES' [ 139s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO/gzip.pm [ 139s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO/gzip.pm [ 139s] + /bin/cat [ 139s] + for i in '${all_dir[@]}' [ 139s] + '[' riscv64-linux-thread-multi/auto = auto ']' [ 139s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 139s] + continue [ 139s] + for i in '${all_dir[@]}' [ 139s] + '[' riscv64-linux-thread-multi/auto/PerlIO = auto ']' [ 139s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 139s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO ']' [ 139s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 139s] + RES= [ 139s] + '[' -n '' ']' [ 139s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO [ 139s] + /bin/cat [ 139s] + for i in '${all_dir[@]}' [ 139s] + '[' riscv64-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 139s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 139s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip ']' [ 139s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 139s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 139s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 139s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip [ 139s] + /bin/cat [ 139s] + for file in '$RES' [ 139s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 139s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 139s] + /bin/cat [ 139s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/share/man ']' [ 139s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 139s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/bin ']' [ 139s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.2 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.2.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 139s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 139s] 158 blocks [ 139s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 140s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 140s] + /usr/lib/rpm/check-buildroot [ 140s] + /usr/lib/rpm//brp-compress [ 140s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 140s] + /usr/lib/rpm/brp-python-hardlink [ 140s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 140s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 140s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 140s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 140s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 145s] Processing files: perl-PerlIO-gzip-0.20-1.2.riscv64 [ 145s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.2 perl-PerlIO-gzip(riscv-64) = 0.20-1.2 [ 145s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 145s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libz.so.1()(64bit) [ 145s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.2.riscv64 [ 145s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 145s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 145s] [ 145s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.2 perl-PerlIO-gzip-debugsource(riscv-64) = 0.20-1.2 [ 145s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 145s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.2.riscv64 [ 145s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 145s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 145s] [ 145s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.2 perl-PerlIO-gzip-debuginfo(riscv-64) = 0.20-1.2 [ 145s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 145s] Recommends: perl-PerlIO-gzip-debugsource(riscv-64) = 0.20-1.2 [ 145s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 145s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.2.src.rpm [ 145s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-0.20-1.2.riscv64.rpm [ 145s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-debugsource-0.20-1.2.riscv64.rpm [ 145s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-debuginfo-0.20-1.2.riscv64.rpm [ 145s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.TKcFgh [ 145s] + umask 022 [ 145s] + cd /home/abuild/rpmbuild/BUILD [ 145s] + cd perl-PerlIO-gzip-0.20 [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.2.riscv64 [ 145s] + exit 0 [ 145s] ... checking for files with abuild user/group [ 146s] ... creating baselibs [ 146s] ... comparing built packages with the former built [ 146s] /usr/lib/build/pkg-diff.sh [ 146s] compare /.build.oldpackages/perl-PerlIO-gzip-0.20-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.2.src.rpm [ 146s] This is not a prerelease project. Compare the project name. [ 146s] comparing disturl_distribution [ 146s] comparing the rpm tags of perl-PerlIO-gzip [ 146s] --- old-rpm-tags [ 146s] +++ new-rpm-tags [ 146s] @@ -80 +80 @@ [ 146s] -perl-PerlIO-gzip.spec 333119491aac8c478cbcd84f54c086d8595a20254b3c9c38babcdf5ea3942379 32 [ 146s] +perl-PerlIO-gzip.spec f4abefab59ab10606a2039cc62c3b4e68fb78832e0c5094152cc6386ccf97564 32 [ 147s] comparing rpmtags [ 147s] comparing RELEASE [ 147s] comparing PROVIDES [ 147s] comparing scripts [ 147s] comparing filelist [ 147s] comparing file checksum [ 147s] compare /.build.oldpackages/perl-PerlIO-gzip-0.20-1.1.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-0.20-1.2.riscv64.rpm [ 147s] Comparing perl-PerlIO-gzip-0.20-1.1.riscv64.rpm to perl-PerlIO-gzip-0.20-1.2.riscv64.rpm [ 148s] This is not a prerelease project. Compare the project name. [ 148s] comparing disturl_distribution [ 148s] comparing the rpm tags of perl-PerlIO-gzip [ 148s] --- old-rpm-tags [ 148s] +++ new-rpm-tags [ 148s] @@ -98 +98 @@ [ 148s] -/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so a630fe1d8c1bb946ace3b193eb3666d3ec37b993bb751ad84e8dd0bccc102409 0 [ 148s] +/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so a5331dea13fee907f598274a2410d858f7e68127dbb864aefff8c264ec2abffe 0 [ 148s] @@ -104 +104 @@ [ 148s] -perl-PerlIO-gzip-0.20-1.1.src.rpm [ 148s] +perl-PerlIO-gzip-0.20-1.2.src.rpm [ 148s] comparing rpmtags [ 148s] comparing RELEASE [ 148s] comparing PROVIDES [ 148s] comparing scripts [ 148s] comparing filelist [ 149s] comparing file checksum [ 149s] creating rename script [ 149s] RPM file checksum differs. [ 149s] Extracting packages [ 149s] /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so differs in ELF sections [ 149s] --- old /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so (objdump) [ 149s] +++ new /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so (objdump) [ 149s] @@ -709,7 +709,7 @@ [ 149s] 2d70 2c617574 6f706f70 00000000 00000000 ,autopop........ [ 149s] 2d80 5065726c 494f477a 69705f70 6f707065 PerlIOGzip_poppe [ 149s] 2d90 6420636f 64653d25 6c640a00 00000000 d code=%ld...... [ 149s] - 2da0 312e332e 30000000 5065726c 494f3a3a 1.3.0...PerlIO:: [ 149s] + 2da0 312e332e 31000000 5065726c 494f3a3a 1.3.1...PerlIO:: [ 149s] 2db0 677a6970 2063616e 27742079 65742063 gzip can't yet c [ 149s] 2dc0 6c6f6e65 20616374 69766520 6c617965 lone active laye [ 149s] 2dd0 72730000 00000000 72000000 00000000 rs......r....... [ 149s] compare /.build.oldpackages/perl-PerlIO-gzip-debuginfo-0.20-1.1.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-debuginfo-0.20-1.2.riscv64.rpm [ 149s] skipping -debuginfo package [ 149s] compare /.build.oldpackages/perl-PerlIO-gzip-debugsource-0.20-1.1.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-debugsource-0.20-1.2.riscv64.rpm [ 150s] Comparing perl-PerlIO-gzip-debugsource-0.20-1.1.riscv64.rpm to perl-PerlIO-gzip-debugsource-0.20-1.2.riscv64.rpm [ 150s] This is not a prerelease project. Compare the project name. [ 150s] comparing disturl_distribution [ 150s] comparing the rpm tags of perl-PerlIO-gzip-debugsource [ 150s] --- old-rpm-tags [ 150s] +++ new-rpm-tags [ 150s] @@ -90 +90 @@ [ 150s] -perl-PerlIO-gzip-0.20-1.1.src.rpm [ 150s] +perl-PerlIO-gzip-0.20-1.2.src.rpm [ 150s] comparing rpmtags [ 150s] comparing RELEASE [ 150s] comparing PROVIDES [ 150s] comparing scripts [ 150s] comparing filelist [ 150s] comparing file checksum [ 150s] creating rename script [ 150s] RPM meta information is identical [ 150s] No rpmlint.log available [ 150s] [ 150s] 9cdcada75fd1 finished "build perl-PerlIO-gzip.spec" at Thu Dec 26 04:52:29 UTC 2024. [ 150s]