[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] cf51b72b8652 started "build update-alternatives.spec" at Thu May 30 03:37:36 UTC 2024. [ 0s] [ 0s] Building update-alternatives for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 'abe40c300d7ad57666f09a89f622f8a7' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/update-alternatives.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/update-alternatives.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/20/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/update-alternatives.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling bash... [ 2s] [7/41] preinstalling diffutils... [ 2s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libfreebl3... [ 2s] [13/41] preinstalling libgcc... [ 3s] [14/41] preinstalling liblua... [ 3s] [15/41] preinstalling liblzma... [ 3s] [16/41] preinstalling libpopt... [ 3s] [17/41] preinstalling libreadline... [ 3s] [18/41] preinstalling libsmack... [ 3s] [19/41] preinstalling libsqlite... [ 3s] [20/41] preinstalling libuuid... [ 3s] [21/41] preinstalling libzstd1... [ 3s] [22/41] preinstalling nspr... [ 3s] [23/41] preinstalling sed... [ 3s] [24/41] preinstalling zlib... [ 3s] [25/41] preinstalling qemu-accel-x86_64-aarch64... [ 14s] [26/41] preinstalling qemu-linux-user-x86_64-cross... [ 17s] [27/41] preinstalling coreutils... [ 17s] [28/41] preinstalling libacl... [ 17s] [29/41] preinstalling libcap... [ 17s] [30/41] preinstalling libelf... [ 17s] [31/41] preinstalling libmount... [ 18s] [32/41] preinstalling smack... [ 18s] [33/41] preinstalling bzip2... [ 18s] [34/41] preinstalling libmagic... [ 18s] [35/41] preinstalling libxml2... [ 18s] [36/41] preinstalling tar... [ 18s] [37/41] preinstalling util-linux... [ 18s] [38/41] preinstalling util-linux-su... [ 18s] [39/41] preinstalling nss... [ 19s] [40/41] preinstalling libsoftokn3... [ 19s] [41/41] preinstalling rpm... [ 19s] running qemu-linux-user-x86_64-cross postinstall script [ 20s] running qemu-accel-x86_64-aarch64 postinstall script [ 20s] running setup postinstall script [ 20s] chroot: failed to run command '': No such file or directory [ 20s] initializing rpm db... [ 21s] reordering...cycle: libsoftokn3 -> nss [ 21s] breaking dependency nss -> libsoftokn3 [ 21s] done [ 21s] querying package ids... [ 22s] [1/98] cumulate libmagic-data-5.45-1.36 [ 22s] [2/98] cumulate setup-0.9-1.26 [ 22s] [3/98] cumulate filesystem-3.1-1.1 [ 22s] [4/98] cumulate glibc-2.30-2.32 [ 22s] [5/98] cumulate bash-3.2.57-1.1 [ 22s] [6/98] cumulate cpio-2.8-1.1 [ 22s] [7/98] cumulate diffutils-3.10-1.1 [ 22s] [8/98] cumulate findutils-4.3.8-3.12 [ 22s] [9/98] cumulate gdbm-1.8.3-2.5 [ 22s] [10/98] cumulate hostname-3.23-1.1 [ 22s] [11/98] cumulate libatomic-9.2.0-1.60 [ 22s] [12/98] cumulate libattr-2.5.1-2.3 [ 22s] [13/98] cumulate libblkid-2.39.3-2.8 [ 22s] [14/98] cumulate libbz2-1.0.8-1.57 [ 22s] [15/98] cumulate libfreebl3-3.98-2.22 [ 22s] [16/98] cumulate libgcc-9.2.0-1.60 [ 22s] [17/98] cumulate libgomp-9.2.0-1.60 [ 22s] [18/98] cumulate libitm-9.2.0-1.60 [ 22s] [19/98] cumulate libltdl-2.4.7-2.5 [ 22s] [20/98] cumulate liblua-5.1.5-1.54 [ 22s] [21/98] cumulate liblzma-5.4.5-1.36 [ 22s] [22/98] cumulate libmd-1.1.0-1.1 [ 22s] [23/98] cumulate libopenssl3-3.0.13-1.27 [ 22s] [24/98] cumulate libpcre-8.45-2.3 [ 22s] [25/98] cumulate libpopt-1.16-1.54 [ 22s] [26/98] cumulate libsmack-1.3.1-1.53 [ 22s] [27/98] cumulate libsmartcols-2.39.3-2.8 [ 22s] [28/98] cumulate libsqlite-3.44.0-1.37 [ 22s] [29/98] cumulate libuuid-2.39.3-2.8 [ 22s] [30/98] cumulate libzstd1-1.5.5-2.4 [ 22s] [31/98] cumulate m4-1.4.19-1.1 [ 22s] [32/98] cumulate net-tools-2.0_20121208git-2.5 [ 22s] [33/98] cumulate nspr-4.35-1.54 [ 22s] [34/98] cumulate patch-2.7.6-1.53 [ 22s] [35/98] cumulate pkg-config-0.29.2-2.3 [ 22s] [36/98] cumulate sed-4.1c-2.3 [ 22s] [37/98] cumulate update-alternatives-1.22.2-2.1 [ 22s] [38/98] cumulate which-2.17-1.1 [ 22s] [39/98] cumulate zlib-1.3-3.5 [ 22s] [40/98] cumulate build-compare-2023.06.18-2.1 [ 22s] [41/98] cumulate qemu-linux-user-x86_64-cross-5.2.0-22.3 [ 22s] [42/98] cumulate coreutils-6.9-15.5 [ 22s] [43/98] cumulate cpp-9.2.0-1.60 [ 22s] [44/98] cumulate gawk-3.1.5-1.1 [ 22s] [45/98] cumulate gcc-c++-9.2.0-1.60 [ 22s] [46/98] cumulate grep-2.5.2-2.3 [ 22s] [47/98] cumulate libacl-2.3.2-1.22 [ 22s] [48/98] cumulate libcap-2.69-1.19 [ 22s] [49/98] cumulate libelf-0.189-1.62 [ 22s] [50/98] cumulate libgfortran-9.2.0-1.60 [ 22s] [51/98] cumulate libmd-devel-1.1.0-1.1 [ 22s] [52/98] cumulate libmount-2.39.3-2.8 [ 22s] [53/98] cumulate libstdc++-9.2.0-1.60 [ 22s] [54/98] cumulate make-4.3-1.55 [ 22s] [55/98] cumulate nss-certs-3.98-2.22 [ 22s] [56/98] cumulate smack-1.3.1-1.53 [ 22s] [57/98] cumulate bzip2-1.0.8-1.57 [ 22s] [58/98] cumulate libfdisk-2.39.3-2.8 [ 22s] [59/98] cumulate libmagic-5.45-1.36 [ 22s] [60/98] cumulate libxml2-2.12.5-1.15 [ 22s] [61/98] cumulate perl-5.38.0-1.17 [ 22s] [62/98] cumulate xz-5.4.5-1.36 [ 22s] [63/98] cumulate build-mkbaselibs-20120927-2.1 [ 22s] [64/98] cumulate libstdc++-devel-9.2.0-1.60 [ 22s] [65/98] cumulate file-5.45-1.36 [ 22s] [66/98] cumulate linux-glibc-devel-5.4-2.9 [ 22s] [67/98] cumulate tar-1.17-1.1 [ 22s] [68/98] cumulate terminfo-base-full-6.4-3.5 [ 22s] [69/98] cumulate autoconf-2.71-1.69 [ 22s] [70/98] cumulate binutils-2.33.1-1.67 [ 22s] [71/98] cumulate glibc-locale-2.30-2.32 [ 22s] [72/98] cumulate gzip-1.3.12-2.3 [ 22s] [73/98] cumulate libcc1-9.2.0-1.60 [ 22s] [74/98] cumulate libubsan-9.2.0-1.60 [ 22s] [75/98] cumulate pam-1.1.6-2.3 [ 22s] [76/98] cumulate tzdata-2023c-1.1 [ 22s] [77/98] cumulate libdw-0.189-1.62 [ 22s] [78/98] cumulate libarchive-3.7.2-1.43 [ 22s] [79/98] cumulate glibc-devel-2.30-2.32 [ 22s] [80/98] cumulate automake-1.16.5-1.67 [ 22s] [81/98] cumulate libasm-0.189-1.62 [ 22s] [82/98] cumulate libncurses5-6.4-3.5 [ 22s] [83/98] cumulate libncurses6-6.4-3.5 [ 22s] [84/98] cumulate build-20120927-2.1 [ 22s] [85/98] cumulate gcc-9.2.0-1.60 [ 22s] [86/98] cumulate libncurses-6.4-3.5 [ 22s] [87/98] cumulate less-643-1.1 [ 22s] [88/98] cumulate libreadline-5.2-2.3 [ 22s] [89/98] cumulate qemu-accel-x86_64-aarch64-0.4-2.31 [ 22s] [90/98] cumulate libtool-2.4.7-2.5 [ 22s] [91/98] cumulate ncurses-devel-6.4-3.5 [ 22s] [92/98] cumulate elfutils-0.189-1.62 [ 22s] [93/98] cumulate util-linux-2.39.3-2.8 [ 22s] [94/98] cumulate util-linux-su-2.39.3-2.8 [ 22s] [95/98] cumulate nss-3.98-2.22 [ 22s] [96/98] cumulate libsoftokn3-3.98-2.22 [ 22s] [97/98] cumulate rpm-4.14.1.1-3.19 [ 22s] [98/98] cumulate rpm-build-4.14.1.1-3.19 [ 22s] now installing cumulated packages [ 23s] Preparing... ######################################## [ 23s] Updating / installing... [ 23s] setup-0.9-1.26 ######################################## [ 23s] filesystem-3.1-1.1 ######################################## [ 23s] glibc-2.30-2.32 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 24s] ######################################## [ 24s] bash-3.2.57-1.1 ######################################## [ 24s] zlib-1.3-3.5 ######################################## [ 24s] libgcc-9.2.0-1.60 ######################################## [ 25s] libstdc++-9.2.0-1.60 ######################################## [ 26s] coreutils-6.9-15.5 ######################################## [ 26s] libbz2-1.0.8-1.57 ######################################## [ 26s] liblzma-5.4.5-1.36 ######################################## [ 26s] libelf-0.189-1.62 ######################################## [ 27s] libdw-0.189-1.62 ######################################## [ 27s] libblkid-2.39.3-2.8 ######################################## [ 27s] nspr-4.35-1.54 ######################################## [ 28s] terminfo-base-full-6.4-3.5 ######################################## [ 28s] libncurses6-6.4-3.5 ######################################## [ 28s] pam-1.1.6-2.3 ######################################## [ 29s] binutils-2.33.1-1.67 ######################################## [ 29s] libcap-2.69-1.19 ######################################## [ 30s] libfreebl3-3.98-2.22 ######################################## [ 30s] liblua-5.1.5-1.54 ######################################## [ 30s] libpopt-1.16-1.54 ######################################## [ 30s] libuuid-2.39.3-2.8 ######################################## [ 31s] libzstd1-1.5.5-2.4 ######################################## [ 31s] pkg-config-0.29.2-2.3 ######################################## [ 31s] libfdisk-2.39.3-2.8 ######################################## [ 31s] libreadline-5.2-2.3 ######################################## [ 31s] libncurses5-6.4-3.5 ######################################## [ 31s] nss-certs-3.98-2.22 ######################################## [ 31s] libmount-2.39.3-2.8 ######################################## [ 32s] libasm-0.189-1.62 ######################################## [ 32s] libxml2-2.12.5-1.15 ######################################## [ 32s] xz-5.4.5-1.36 ######################################## [ 32s] bzip2-1.0.8-1.57 ######################################## [ 33s] linux-glibc-devel-5.4-2.9 ######################################## [ 33s] glibc-devel-2.30-2.32 ######################################## [ 33s] gzip-1.3.12-2.3 ######################################## [ 33s] libcc1-9.2.0-1.60 ######################################## [ 33s] libubsan-9.2.0-1.60 ######################################## [ 33s] libgfortran-9.2.0-1.60 ######################################## [ 34s] make-4.3-1.55 ######################################## [ 34s] findutils-4.3.8-3.12 ######################################## [ 34s] gdbm-1.8.3-2.5 ######################################## [ 38s] perl-5.38.0-1.17 ######################################## [ 38s] build-mkbaselibs-20120927-2.1 ######################################## [ 38s] libatomic-9.2.0-1.60 ######################################## [ 38s] libattr-2.5.1-2.3 ######################################## [ 38s] libacl-2.3.2-1.22 ######################################## [ 39s] tar-1.17-1.1 ######################################## [ 39s] libgomp-9.2.0-1.60 ######################################## [ 39s] libitm-9.2.0-1.60 ######################################## [ 41s] gcc-9.2.0-1.60 ######################################## [ 41s] libltdl-2.4.7-2.5 ######################################## [ 41s] libmd-1.1.0-1.1 ######################################## [ 41s] libopenssl3-3.0.13-1.27 ######################################## [ 41s] libarchive-3.7.2-1.43 ######################################## [ 42s] libpcre-8.45-2.3 ######################################## [ 42s] libsmack-1.3.1-1.53 ######################################## [ 42s] libsmartcols-2.39.3-2.8 ######################################## [ 43s] libsqlite-3.44.0-1.37 ######################################## [ 43s] libsoftokn3-3.98-2.22 ######################################## [ 44s] nss-3.98-2.22 ######################################## [ 44s] m4-1.4.19-1.1 ######################################## [ 44s] autoconf-2.71-1.69 ######################################## [ 44s] automake-1.16.5-1.67 ######################################## [ 44s] patch-2.7.6-1.53 ######################################## [ 44s] sed-4.1c-2.3 ######################################## [ 45s] util-linux-2.39.3-2.8 ######################################## [ 45s] libmagic-data-5.45-1.36 ######################################## [ 45s] libmagic-5.45-1.36 ######################################## [ 46s] rpm-4.14.1.1-3.19 ######################################## [ 47s] rpm-build-4.14.1.1-3.19 ######################################## [ 47s] file-5.45-1.36 ######################################## [ 47s] util-linux-su-2.39.3-2.8 ######################################## [ 47s] libtool-2.4.7-2.5 ######################################## [ 47s] smack-1.3.1-1.53 ######################################## [ 47s] grep-2.5.2-2.3 ######################################## [ 47s] libmd-devel-1.1.0-1.1 ######################################## [ 61s] qemu-accel-x86_64-aarch64-0.4-2.31 ######################################## [ 61s] build-20120927-2.1 ######################################## [ 62s] elfutils-0.189-1.62 ######################################## [ 62s] ncurses-devel-6.4-3.5 ######################################## [ 62s] libncurses-6.4-3.5 ######################################## [ 62s] less-643-1.1 ######################################## [ 62s] glibc-locale-2.30-2.32 ######################################## [ 63s] tzdata-2023c-1.1 ######################################## [ 63s] libstdc++-devel-9.2.0-1.60 ######################################## [ 65s] cpp-9.2.0-1.60 ######################################## [ 66s] gcc-c++-9.2.0-1.60 ######################################## [ 66s] build-compare-2023.06.18-2.1 ######################################## [ 72s] qemu-linux-user-x86_64-cross-5.2.0-22.######################################## [ 72s] gawk-3.1.5-1.1 ######################################## [ 72s] cpio-2.8-1.1 ######################################## [ 72s] diffutils-3.10-1.1 ######################################## [ 72s] hostname-3.23-1.1 ######################################## [ 72s] net-tools-2.0_20121208git-2.5 ######################################## [ 72s] update-alternatives-1.22.2-2.1 ######################################## [ 72s] which-2.17-1.1 ######################################## [ 72s] now finalizing build dir... [ 73s] ----------------------------------------------------------------- [ 73s] I have the following modifications for update-alternatives.spec: [ 73s] 20c20 [ 73s] < Release: 0 [ 73s] --- [ 73s] > Release: 3.1 [ 73s] build target is aarch64-tizen-linux [ 73s] ----------------------------------------------------------------- [ 73s] ----- building update-alternatives.spec (user abuild) [ 73s] ----------------------------------------------------------------- [ 73s] ----------------------------------------------------------------- [ 73s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/abe40c300d7ad57666f09a89f622f8a7-update-alternatives' /home/abuild/rpmbuild/SOURCES/update-alternatives.spec [ 73s] Building target platforms: aarch64-tizen-linux [ 73s] Building for target aarch64-tizen-linux [ 73s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bVVb6d [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + rm -rf dpkg-1.22.2 [ 73s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/dpkg_1.22.2.tar.bz2 [ 73s] + /bin/tar -xof - [ 76s] + STATUS=0 [ 76s] + '[' 0 -ne 0 ']' [ 76s] + cd dpkg-1.22.2 [ 76s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 76s] + echo 'Patch #0 (0001-Bump-to-1.22.2.patch.gz):' [ 76s] Patch #0 (0001-Bump-to-1.22.2.patch.gz): [ 76s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/0001-Bump-to-1.22.2.patch.gz [ 76s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 76s] patching file ABOUT-NLS [ 76s] patching file ABOUT-NLS~ [ 76s] patching file Makefile.in [ 76s] patching file aclocal.m4 [ 76s] patching file autom4te.cache/output.0 [ 76s] patching file autom4te.cache/output.1 [ 76s] patching file autom4te.cache/requests [ 76s] patching file autom4te.cache/traces.0 [ 76s] patching file autom4te.cache/traces.1 [ 76s] patching file build-aux/ar-lib [ 76s] patching file build-aux/compile [ 76s] patching file build-aux/config.guess [ 76s] patching file build-aux/config.rpath [ 76s] patching file build-aux/config.rpath~ [ 76s] patching file build-aux/config.sub [ 76s] patching file build-aux/depcomp [ 76s] patching file build-aux/install-sh [ 76s] patching file build-aux/ltmain.sh [ 76s] patching file build-aux/missing [ 76s] patching file config.h.in [ 76s] patching file config.h.in~ [ 76s] patching file configure [ 76s] patching file dselect/Makefile.in [ 76s] patching file dselect/methods/Makefile.in [ 76s] patching file dselect/po/Makefile.in.in [ 76s] patching file dselect/po/Makefile.in.in~ [ 76s] patching file dselect/po/Makevars.template [ 76s] patching file dselect/po/Rules-quot [ 76s] patching file dselect/po/Rules-quot~ [ 76s] patching file dselect/po/en@boldquot.header [ 76s] patching file dselect/po/en@boldquot.header~ [ 76s] patching file dselect/po/en@quot.header [ 76s] patching file dselect/po/en@quot.header~ [ 76s] patching file dselect/po/insert-header.sin [ 76s] patching file dselect/po/insert-header.sin~ [ 76s] patching file dselect/po/remove-potcdate.sin [ 76s] patching file dselect/po/remove-potcdate.sin~ [ 76s] patching file lib/Makefile.in [ 76s] patching file lib/compat/Makefile.in [ 76s] patching file lib/dpkg/Makefile.in [ 76s] patching file m4/codeset.m4 [ 76s] patching file m4/extern-inline.m4 [ 76s] patching file m4/fcntl-o.m4 [ 76s] patching file m4/glibc2.m4 [ 76s] patching file m4/glibc21.m4 [ 76s] patching file m4/intdiv0.m4 [ 76s] patching file m4/intl.m4 [ 76s] patching file m4/intldir.m4 [ 76s] patching file m4/intmax.m4 [ 76s] patching file m4/inttypes-pri.m4 [ 76s] patching file m4/inttypes_h.m4 [ 76s] patching file m4/lcmessage.m4 [ 76s] patching file m4/libtool.m4 [ 76s] patching file m4/lock.m4 [ 76s] patching file m4/longlong.m4 [ 76s] patching file m4/ltoptions.m4 [ 76s] patching file m4/ltsugar.m4 [ 76s] patching file m4/ltversion.m4 [ 76s] patching file m4/lt~obsolete.m4 [ 76s] patching file m4/printf-posix.m4 [ 76s] patching file m4/size_max.m4 [ 76s] patching file m4/stdint_h.m4 [ 76s] patching file m4/threadlib.m4 [ 76s] patching file m4/uintmax_t.m4 [ 76s] patching file m4/visibility.m4 [ 76s] patching file m4/wchar_t.m4 [ 76s] patching file m4/wint_t.m4 [ 76s] patching file m4/xsize.m4 [ 76s] patching file man/Makefile.in [ 76s] patching file po/Makefile.in.in [ 76s] patching file po/Makefile.in.in~ [ 76s] patching file po/Makevars.template [ 76s] patching file po/Rules-quot [ 76s] patching file po/Rules-quot~ [ 76s] patching file po/en@boldquot.header [ 76s] patching file po/en@boldquot.header~ [ 76s] patching file po/en@quot.header [ 76s] patching file po/en@quot.header~ [ 76s] patching file po/insert-header.sin [ 76s] patching file po/insert-header.sin~ [ 76s] patching file po/remove-potcdate.sin [ 76s] patching file po/remove-potcdate.sin~ [ 76s] patching file scripts/Makefile.in [ 76s] patching file scripts/mk/Makefile.in [ 76s] patching file scripts/po/Makefile.in.in [ 76s] patching file scripts/po/Makefile.in.in~ [ 76s] patching file scripts/po/Makevars.template [ 76s] patching file scripts/po/Rules-quot [ 76s] patching file scripts/po/Rules-quot~ [ 76s] patching file scripts/po/en@boldquot.header [ 76s] patching file scripts/po/en@boldquot.header~ [ 76s] patching file scripts/po/en@quot.header [ 76s] patching file scripts/po/en@quot.header~ [ 76s] patching file scripts/po/insert-header.sin [ 76s] patching file scripts/po/insert-header.sin~ [ 76s] patching file scripts/po/remove-potcdate.sin [ 76s] patching file scripts/po/remove-potcdate.sin~ [ 76s] patching file src/Makefile.in [ 76s] patching file utils/Makefile.in [ 76s] + cp /home/abuild/rpmbuild/SOURCES/update-alternatives.manifest . [ 77s] + exit 0 [ 77s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ZdWWnc [ 77s] + umask 022 [ 77s] + cd /home/abuild/rpmbuild/BUILD [ 77s] + cd dpkg-1.22.2 [ 77s] + ref=/usr/lib/rpm [ 77s] + mints=0 [ 77s] + case $(uname -m) in [ 77s] ++ uname -m [ 77s] + mints=20120610 [ 77s] + for s in guess sub [ 77s] ++ find -maxdepth 8 -name config.guess [ 77s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 77s] + grep -q config-patches@ ./build-aux/config.guess [ 77s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build-aux/config.guess [ 77s] ++ tr -d $'\r' [ 77s] + timestamp=20180224 [ 77s] + test -n 20180224 [ 77s] + test 20180224 -ge 20120610 [ 77s] + for s in guess sub [ 77s] ++ find -maxdepth 8 -name config.sub [ 77s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 77s] + grep -q config-patches@ ./build-aux/config.sub [ 77s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build-aux/config.sub [ 77s] ++ tr -d $'\r' [ 77s] + timestamp=20180222 [ 77s] + test -n 20180222 [ 77s] + test 20180222 -ge 20120610 [ 77s] + LANG=C [ 77s] + export LANG [ 77s] + unset DISPLAY [ 77s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 77s] + export CFLAGS [ 77s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 77s] + export CXXFLAGS [ 77s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 77s] + export FFLAGS [ 77s] + LDFLAGS= [ 77s] + export LDFLAGS [ 77s] + export 'CFLAGS+= -fPIC' [ 77s] + CFLAGS+=' -fPIC' [ 77s] + export 'CXXFLAGS+= -fPIC' [ 77s] + CXXFLAGS+=' -fPIC' [ 77s] + export 'LDFLAGS+= -pie' [ 77s] + LDFLAGS+=' -pie' [ 77s] + AR=gcc-ar [ 77s] + export AR [ 77s] + NM=/bin/nm [ 77s] + export NM [ 77s] + RANLIB=gcc-ranlib [ 77s] + export RANLIB [ 77s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC' [ 77s] + export CFLAGS [ 77s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC' [ 77s] + export CXXFLAGS [ 77s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 77s] + export FFLAGS [ 77s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-admindir=/var/lib/rpm/ --disable-compiler-warnings [ 77s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 77s] checking whether the C compiler works... yes [ 77s] checking for C compiler default output file name... a.out [ 77s] checking for suffix of executables... [ 77s] checking whether we are cross compiling... no [ 77s] checking for suffix of object files... o [ 78s] checking whether we are using the GNU C compiler... yes [ 78s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 78s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 78s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 78s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 78s] checking for grep that handles long lines and -e... /bin/grep [ 78s] checking for egrep... /bin/grep -E [ 78s] checking for ANSI C header files... yes [ 78s] checking for sys/types.h... yes [ 78s] checking for sys/stat.h... yes [ 78s] checking for stdlib.h... yes [ 78s] checking for string.h... yes [ 78s] checking for memory.h... yes [ 78s] checking for strings.h... yes [ 78s] checking for inttypes.h... yes [ 78s] checking for stdint.h... yes [ 78s] checking for unistd.h... yes [ 78s] checking minix/config.h usability... no [ 78s] checking minix/config.h presence... no [ 78s] checking for minix/config.h... no [ 79s] checking whether it is safe to define __EXTENSIONS__... yes [ 79s] checking for a BSD-compatible install... /bin/install -c [ 79s] checking whether build environment is sane... yes [ 79s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 79s] checking for gawk... gawk [ 79s] checking whether make sets $(MAKE)... yes [ 79s] checking whether make supports the include directive... yes (GNU style) [ 79s] checking whether make supports nested variables... yes [ 79s] checking whether UID '399' is supported by ustar format... yes [ 79s] checking whether GID '399' is supported by ustar format... yes [ 79s] checking how to create a ustar tar archive... gnutar [ 79s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 79s] checking whether make supports nested variables... (cached) yes [ 79s] checking for a sed that does not truncate output... /bin/sed [ 79s] checking whether NLS is requested... yes [ 79s] checking for msgfmt... no [ 79s] checking for gmsgfmt... : [ 79s] checking for xgettext... no [ 79s] checking for msgmerge... no [ 79s] checking build system type... aarch64-tizen-linux-gnu [ 79s] checking host system type... aarch64-tizen-linux-gnu [ 79s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 79s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 79s] checking for shared library run path origin... done [ 79s] checking 32-bit host C ABI... no [ 79s] checking for ELF binary format... yes [ 79s] checking for the common suffixes of directories in the library search path... lib,lib,lib64 [ 79s] checking for CFPreferencesCopyAppValue... no [ 79s] checking for CFLocaleCopyPreferredLanguages... no [ 79s] checking for GNU gettext in libc... yes [ 79s] checking whether to use NLS... yes [ 79s] checking where the gettext function comes from... libc [ 79s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 79s] checking the archiver (gcc-ar) interface... ar [ 79s] checking how to print strings... printf [ 79s] checking for a sed that does not truncate output... (cached) /bin/sed [ 79s] checking for fgrep... /bin/grep -F [ 79s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 79s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 79s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 80s] checking the name lister (/bin/nm) interface... BSD nm [ 80s] checking whether ln -s works... yes [ 80s] checking the maximum length of command line arguments... 1572864 [ 80s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 80s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 80s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 80s] checking for aarch64-tizen-linux-gnu-objdump... no [ 80s] checking for objdump... objdump [ 80s] checking how to recognize dependent libraries... pass_all [ 80s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 80s] checking for dlltool... no [ 80s] checking how to associate runtime and link libraries... printf %s\n [ 80s] checking for aarch64-tizen-linux-gnu-ar... (cached) gcc-ar [ 80s] checking for archiver @FILE support... @ [ 80s] checking for aarch64-tizen-linux-gnu-strip... no [ 80s] checking for strip... strip [ 80s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 80s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 80s] checking for sysroot... no [ 80s] checking for a working dd... /bin/dd [ 80s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 80s] checking for aarch64-tizen-linux-gnu-mt... no [ 80s] checking for mt... no [ 80s] checking if : is a manifest tool... no [ 80s] checking for dlfcn.h... yes [ 80s] checking for objdir... .libs [ 80s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 80s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 80s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 80s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 80s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 80s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 80s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 80s] checking dynamic linker characteristics... GNU/Linux ld.so [ 80s] checking how to hardcode library paths into programs... immediate [ 80s] checking whether stripping libraries is possible... yes [ 80s] checking if libtool supports shared libraries... yes [ 80s] checking whether to build shared libraries... no [ 80s] checking whether to build static libraries... yes [ 80s] checking for --as-needed linker flag... yes [ 80s] checking for --version-script linker flag... yes [ 80s] checking whether to build dselect... yes [ 80s] checking whether to build start-stop-daemon... yes [ 80s] checking whether to build update-alternatives... yes [ 81s] checking for perl >= 5.32.1... /bin/perl [ 82s] checking for a POSIX sh that supports -- after -c... sh [ 82s] checking for pager... no [ 82s] checking for less... less [ 82s] checking for a sed that does not truncate output... (cached) /bin/sed [ 82s] checking for grep that handles long lines and -e... (cached) /bin/grep [ 82s] checking for egrep... (cached) /bin/grep -E [ 82s] checking for aarch64-tizen-linux-gnu-gcc... (cached) aarch64-tizen-linux-gnu-gcc [ 82s] checking whether we are using the GNU C compiler... (cached) yes [ 82s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 82s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 82s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 82s] checking whether aarch64-tizen-linux-gnu-gcc supports C99 features... yes [ 82s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 82s] checking whether we are using the GNU C++ compiler... yes [ 82s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 82s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 82s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 82s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 82s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 82s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 82s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 82s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 82s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 82s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 82s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 82s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 82s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 82s] checking how to hardcode library paths into programs... immediate [ 83s] checking whether aarch64-tizen-linux-gnu-g++ supports C++11... yes [ 83s] checking for gpatch... no [ 83s] checking for patch... patch [ 83s] checking for doxygen... no [ 83s] checking for dot... NO [ 83s] checking for gnutar... no [ 83s] checking for gtar... no [ 83s] checking for tar... tar [ 83s] checking for po4a >= 0.59... no [ 83s] checking for perl >= 5.32.1... (cached) /bin/perl [ 83s] checking for pod2man... pod2man [ 83s] checking whether to build with code coverage... no [ 83s] checking for special C compiler options needed for large files... no [ 83s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 83s] checking for library containing clock_gettime... none required [ 83s] checking md5.h usability... yes [ 83s] checking md5.h presence... yes [ 83s] checking for md5.h... yes [ 83s] checking for library containing MD5Init... -lmd [ 83s] checking for gzdopen in -lz... no [ 83s] checking for zng_gzdopen in -lz-ng... no [ 83s] checking for BZ2_bzdopen in -lbz2... no [ 83s] checking for lzma_alone_decoder in -llzma... no [ 83s] checking for lzma_stream_encoder_mt in -llzma... no [ 83s] checking for lzma_stream_decoder_mt in -llzma... no [ 84s] checking for ZSTD_compressStream2 in -lzstd... no [ 84s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 84s] checking pkg-config is at least version 0.9.0... yes [ 84s] checking for SELINUX... no [ 84s] checking whether Unicode is requested... yes [ 84s] checking ncurses/ncurses.h usability... yes [ 84s] checking ncurses/ncurses.h presence... yes [ 84s] checking for ncurses/ncurses.h... yes [ 84s] checking ncurses.h usability... yes [ 84s] checking ncurses.h presence... yes [ 84s] checking for ncurses.h... yes [ 84s] checking curses.h usability... yes [ 84s] checking curses.h presence... yes [ 84s] checking for curses.h... yes [ 84s] checking ncurses/term.h usability... yes [ 84s] checking ncurses/term.h presence... yes [ 84s] checking for ncurses/term.h... yes [ 84s] checking term.h usability... yes [ 84s] checking term.h presence... yes [ 84s] checking for term.h... yes [ 84s] checking ncursesw/ncurses.h usability... yes [ 84s] checking ncursesw/ncurses.h presence... yes [ 84s] checking for ncursesw/ncurses.h... yes [ 85s] checking ncursesw/term.h usability... yes [ 85s] checking ncursesw/term.h presence... yes [ 85s] checking for ncursesw/term.h... yes [ 85s] checking for initscr in -lncursesw... yes [ 85s] checking for library containing tigetstr... -ltinfo [ 85s] checking for library containing bind... none required [ 85s] checking for proc_stat_list_create in -lps... no [ 85s] checking for kvm_openfiles in -lkvm... no [ 85s] checking stddef.h usability... yes [ 85s] checking stddef.h presence... yes [ 85s] checking for stddef.h... yes [ 85s] checking error.h usability... yes [ 85s] checking error.h presence... yes [ 85s] checking for error.h... yes [ 85s] checking err.h usability... yes [ 85s] checking err.h presence... yes [ 85s] checking for err.h... yes [ 85s] checking locale.h usability... yes [ 85s] checking locale.h presence... yes [ 85s] checking for locale.h... yes [ 86s] checking xlocale.h usability... no [ 86s] checking xlocale.h presence... no [ 86s] checking for xlocale.h... no [ 86s] checking libintl.h usability... yes [ 86s] checking libintl.h presence... yes [ 86s] checking for libintl.h... yes [ 86s] checking kvm.h usability... no [ 86s] checking kvm.h presence... no [ 86s] checking for kvm.h... no [ 86s] checking sys/sysmacros.h usability... yes [ 86s] checking sys/sysmacros.h presence... yes [ 86s] checking for sys/sysmacros.h... yes [ 86s] checking sys/param.h usability... yes [ 86s] checking sys/param.h presence... yes [ 86s] checking for sys/param.h... yes [ 86s] checking sys/syscall.h usability... yes [ 86s] checking sys/syscall.h presence... yes [ 86s] checking for sys/syscall.h... yes [ 86s] checking sys/user.h usability... yes [ 86s] checking sys/user.h presence... yes [ 86s] checking for sys/user.h... yes [ 86s] checking sys/mkdev.h usability... no [ 86s] checking sys/mkdev.h presence... no [ 86s] checking for sys/mkdev.h... no [ 86s] checking sys/pstat.h usability... no [ 86s] checking sys/pstat.h presence... no [ 86s] checking for sys/pstat.h... no [ 86s] checking linux/fiemap.h usability... yes [ 86s] checking linux/fiemap.h presence... yes [ 86s] checking for linux/fiemap.h... yes [ 86s] checking for sys/procfs.h... yes [ 86s] checking for sys/proc.h... no [ 86s] checking cxxabi.h usability... yes [ 86s] checking cxxabi.h presence... yes [ 86s] checking for cxxabi.h... yes [ 87s] checking size of short... 2 [ 87s] checking size of int... 4 [ 87s] checking size of long... 8 [ 87s] checking size of long long... 8 [ 87s] checking size of float... 4 [ 88s] checking size of double... 8 [ 88s] checking size of long double... 16 [ 88s] checking size of void *... 8 [ 88s] checking size of off_t... 8 [ 88s] checking size of time_t... 8 [ 88s] checking alignment of max_align_t... 16 [ 88s] checking whether char is unsigned... yes [ 88s] checking whether byte ordering is bigendian... no [ 89s] checking for an ANSI C-conforming const... yes [ 89s] checking for inline... inline [ 89s] checking for working volatile... yes [ 89s] checking for mode_t... yes [ 89s] checking for pid_t... yes [ 89s] checking for size_t... yes [ 89s] checking for ptrdiff_t... yes [ 89s] checking for struct psinfo... no [ 89s] checking for unistd.h... (cached) yes [ 89s] checking whether sys_siglist is declared... yes [ 90s] checking whether sys_errlist is declared... yes [ 90s] checking whether sys_nerr is declared... yes [ 90s] checking for va_copy... yes [ 90s] checking for C99 snprintf functions... yes [ 90s] checking whether fsync works on directories... yes [ 90s] checking whether offsetof is declared... yes [ 90s] checking whether makedev is declared... no [ 90s] checking whether WCOREDUMP is declared... yes [ 90s] checking whether TIOCNOTTY is declared... yes [ 90s] checking whether O_NOFOLLOW is declared... yes [ 90s] checking whether F_ALLOCSP64 is declared... no [ 90s] checking whether F_PREALLOCATE is declared... no [ 91s] checking whether P_tmpdir is declared... yes [ 91s] checking for program_invocation_short_name... yes [ 91s] checking for __progname... yes [ 91s] checking for getopt... yes [ 91s] checking for getopt_long... yes [ 91s] checking for obstack_free... yes [ 91s] checking for strchrnul... yes [ 91s] checking for strnlen... yes [ 91s] checking for strndup... yes [ 92s] checking for strerror... yes [ 92s] checking for strsignal... yes [ 92s] checking for asprintf... yes [ 92s] checking for scandir... yes [ 92s] checking for alphasort... yes [ 92s] checking for unsetenv... yes [ 92s] checking for memcpy... yes [ 93s] checking for lchown... yes [ 93s] checking for strtoimax... yes [ 93s] checking for isascii... yes [ 93s] checking for setsid... yes [ 93s] checking for getdtablesize... yes [ 93s] checking for getprocs64... no [ 93s] checking for getprogname... no [ 93s] checking for getexecname... no [ 94s] checking for lutimes... yes [ 94s] checking for fallocate... yes [ 94s] checking for posix_fallocate... yes [ 94s] checking for posix_fadvise... yes [ 94s] checking for uselocale... yes [ 94s] checking for __cxa_pure_virtual... yes [ 95s] checking dpkg cpu type... arm64 [ 95s] checking dpkg operating system type... linux [ 96s] checking dpkg architecture name... arm64 [ 96s] checking that generated files are newer than configure... done [ 96s] configure: creating ./config.status [ 98s] config.status: creating Makefile [ 98s] config.status: creating dselect/Makefile [ 98s] config.status: creating dselect/methods/Makefile [ 98s] config.status: creating dselect/po/Makefile.in [ 98s] config.status: creating lib/Makefile [ 98s] config.status: creating lib/compat/Makefile [ 98s] config.status: creating lib/dpkg/Makefile [ 99s] config.status: creating lib/dpkg/libdpkg.pc [ 99s] config.status: creating doc/Doxyfile [ 99s] config.status: creating man/Makefile [ 99s] config.status: creating po/Makefile.in [ 99s] config.status: creating scripts/Build.PL [ 99s] config.status: creating scripts/Makefile [ 99s] config.status: creating scripts/README.cpan [ 99s] config.status: creating scripts/mk/Makefile [ 99s] config.status: creating scripts/po/Makefile.in [ 99s] config.status: creating src/Makefile [ 99s] config.status: creating src/at/atlocal [ 99s] config.status: creating utils/Makefile [ 99s] config.status: creating config.h [ 100s] config.status: executing depfiles commands [ 104s] config.status: executing po-directories commands [ 104s] config.status: creating dselect/po/POTFILES [ 104s] config.status: creating dselect/po/Makefile [ 104s] config.status: creating po/POTFILES [ 104s] config.status: creating po/Makefile [ 104s] config.status: creating scripts/po/POTFILES [ 104s] config.status: creating scripts/po/Makefile [ 104s] config.status: executing libtool commands [ 104s] config.status: executing src/at/atconfig commands [ 104s] [ 104s] Configuration: [ 104s] Arch attributes: [ 104s] cpu name . . . . . . . . . . : arm64 [ 104s] os name . . . . . . . . . . . : linux [ 104s] arch name . . . . . . . . . . : arm64 [ 104s] arch bits . . . . . . . . . . : 64 [ 104s] arch endian . . . . . . . . . : little [ 104s] char bits . . . . . . . . . . : 8 [ 104s] char sign . . . . . . . . . . : unsigned [ 104s] sizeof(short) . . . . . . . . : 2 [ 104s] sizeof(int) . . . . . . . . . : 4 [ 104s] sizeof(long) . . . . . . . . : 8 [ 104s] sizeof(long long) . . . . . . : 8 [ 104s] sizeof(float) . . . . . . . . : 4 [ 104s] sizeof(double) . . . . . . . : 8 [ 104s] sizeof(long double) . . . . . : 16 [ 104s] sizeof(void *) . . . . . . . : 8 [ 104s] sizeof(off_t) . . . . . . . . : 8 [ 104s] sizeof(time_t) . . . . . . . : 8 [ 104s] alignof(max_align_t) . . . . : 16 [ 104s] [ 104s] Features: [ 104s] native language support . . . : yes [ 104s] unicode support . . . . . . . : yes [ 104s] development documentation . . : yes [ 104s] code coverage . . . . . . . . : no [ 104s] build shared libraries . . . : no [ 104s] mmap loaders . . . . . . . . : no [ 104s] disk pre-allocation . . . . . : no [ 104s] default dpkg-deb compressor . : xz [ 104s] default shell interpreter . . : sh [ 104s] default pager program . . . . : less [ 104s] [ 104s] Paths: [ 104s] devlibdir . . . . . . . . . . : /usr/lib64 [ 104s] pkgconfdir . . . . . . . . . : /etc/dpkg [ 104s] admindir . . . . . . . . . . : /var/lib/rpm/ [ 104s] backupsdir . . . . . . . . . : /var/backups [ 104s] logdir . . . . . . . . . . . : /var/log [ 104s] perl interpreter . . . . . . : /bin/perl [ 104s] perl libdir . . . . . . . . . : $(prefix)/lib64/perl5/vendor_perl/5.38.0 [ 104s] [ 104s] Programs: [ 104s] update-alternatives . . . . . : yes [ 104s] start-stop-daemon . . . . . . : yes [ 104s] dselect . . . . . . . . . . . : yes [ 104s] [ 104s] System Libraries: [ 104s] librt . . . . . . . . . . . . : builtin [ 104s] libsocket . . . . . . . . . . : builtin [ 104s] libps . . . . . . . . . . . . : no [ 104s] libkvm . . . . . . . . . . . : no [ 104s] libselinux . . . . . . . . . : no [ 104s] libmd . . . . . . . . . . . . : yes [ 104s] libz . . . . . . . . . . . . : no [ 104s] liblzma . . . . . . . . . . . : no [ 104s] libzstd . . . . . . . . . . . : no [ 104s] libbz2 . . . . . . . . . . . : no [ 104s] libcurses . . . . . . . . . . : yes [ 104s] + make -C lib/compat -j12 [ 104s] make: Entering directory '/home/abuild/rpmbuild/BUILD/dpkg-1.22.2/lib/compat' [ 104s] cd ../.. && make am--refresh [ 105s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dpkg-1.22.2' [ 105s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/dpkg-1.22.2/build-aux/missing aclocal-1.16 -I m4 [ 117s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/dpkg-1.22.2/build-aux/missing autoconf [ 117s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/dpkg-1.22.2/build-aux/missing automake-1.16 --foreign [ 124s] /bin/sh ./config.status --recheck [ 125s] running CONFIG_SHELL=/bin/sh /bin/sh ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-admindir=/var/lib/rpm/ --disable-compiler-warnings build_alias=aarch64-tizen-linux-gnu host_alias=aarch64-tizen-linux-gnu CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC LDFLAGS= -pie CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig --no-create --no-recursion [ 125s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 125s] checking whether the C compiler works... yes [ 125s] checking for C compiler default output file name... a.out [ 125s] checking for suffix of executables... [ 126s] checking whether we are cross compiling... no [ 126s] checking for suffix of object files... o [ 126s] checking whether the compiler supports GNU C... yes [ 126s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 126s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 126s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 126s] checking for stdio.h... yes [ 126s] checking for stdlib.h... yes [ 126s] checking for string.h... yes [ 126s] checking for inttypes.h... yes [ 126s] checking for stdint.h... yes [ 126s] checking for strings.h... yes [ 126s] checking for sys/stat.h... yes [ 126s] checking for sys/types.h... yes [ 126s] checking for unistd.h... yes [ 126s] checking for wchar.h... yes [ 126s] checking for minix/config.h... no [ 126s] checking whether it is safe to define __EXTENSIONS__... yes [ 126s] checking whether _XOPEN_SOURCE should be defined... no [ 127s] checking for a BSD-compatible install... /bin/install -c [ 127s] checking whether build environment is sane... yes [ 127s] checking for a race-free mkdir -p... /bin/mkdir -p [ 127s] checking for gawk... gawk [ 127s] checking whether make sets $(MAKE)... yes [ 127s] checking whether make supports the include directive... yes (GNU style) [ 127s] checking whether make supports nested variables... yes [ 127s] checking whether UID '399' is supported by ustar format... yes [ 127s] checking whether GID '399' is supported by ustar format... yes [ 127s] checking how to create a ustar tar archive... gnutar [ 127s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 127s] checking whether make supports nested variables... (cached) yes [ 127s] checking for a sed that does not truncate output... /bin/sed [ 127s] checking whether NLS is requested... yes [ 127s] checking for msgfmt... no [ 127s] checking for gmsgfmt... : [ 127s] checking for xgettext... no [ 127s] checking for msgmerge... no [ 127s] checking build system type... aarch64-tizen-linux-gnu [ 128s] checking host system type... aarch64-tizen-linux-gnu [ 128s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 128s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 128s] checking for shared library run path origin... done [ 128s] checking 32-bit host C ABI... no [ 128s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 128s] checking for grep that handles long lines and -e... /bin/grep [ 128s] checking for egrep... /bin/grep -E [ 128s] checking for ELF binary format... yes [ 129s] checking for the common suffixes of directories in the library search path... lib,lib,lib64 [ 129s] checking for CFPreferencesCopyAppValue... no [ 129s] checking for CFLocaleCopyPreferredLanguages... no [ 129s] checking for GNU gettext in libc... yes [ 129s] checking whether to use NLS... yes [ 129s] checking where the gettext function comes from... libc [ 129s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 129s] checking the archiver (gcc-ar) interface... ar [ 129s] checking how to print strings... printf [ 129s] checking for a sed that does not truncate output... (cached) /bin/sed [ 129s] checking for fgrep... /bin/grep -F [ 129s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 129s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 129s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 129s] checking the name lister (/bin/nm) interface... BSD nm [ 129s] checking whether ln -s works... yes [ 129s] checking the maximum length of command line arguments... 1572864 [ 129s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 129s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 129s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 129s] checking for aarch64-tizen-linux-gnu-objdump... no [ 129s] checking for objdump... objdump [ 129s] checking how to recognize dependent libraries... pass_all [ 129s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 129s] checking for dlltool... no [ 129s] checking how to associate runtime and link libraries... printf %s\n [ 129s] checking for aarch64-tizen-linux-gnu-ar... (cached) gcc-ar [ 129s] checking for archiver @FILE support... @ [ 129s] checking for aarch64-tizen-linux-gnu-strip... no [ 129s] checking for strip... strip [ 129s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 130s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 130s] checking for sysroot... no [ 130s] checking for a working dd... /bin/dd [ 130s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 130s] checking for aarch64-tizen-linux-gnu-mt... no [ 130s] checking for mt... no [ 130s] checking if : is a manifest tool... no [ 130s] checking for dlfcn.h... yes [ 130s] checking for objdir... .libs [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 130s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 131s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 131s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 131s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 131s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 131s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 131s] checking dynamic linker characteristics... GNU/Linux ld.so [ 131s] checking how to hardcode library paths into programs... immediate [ 131s] checking whether stripping libraries is possible... yes [ 131s] checking if libtool supports shared libraries... yes [ 131s] checking whether to build shared libraries... no [ 131s] checking whether to build static libraries... yes [ 131s] checking for --as-needed linker flag... yes [ 132s] checking for --version-script linker flag... yes [ 132s] checking whether to build dselect... yes [ 132s] checking whether to build start-stop-daemon... yes [ 132s] checking whether to build update-alternatives... yes [ 132s] checking for perl >= 5.32.1... /bin/perl [ 133s] checking for a POSIX sh that supports -- after -c... sh [ 133s] checking for pager... no [ 133s] checking for less... less [ 133s] checking for a sed that does not truncate output... (cached) /bin/sed [ 133s] checking for grep that handles long lines and -e... (cached) /bin/grep [ 133s] checking for egrep... (cached) /bin/grep -E [ 133s] checking for aarch64-tizen-linux-gnu-gcc... (cached) aarch64-tizen-linux-gnu-gcc [ 133s] checking whether the compiler supports GNU C... (cached) yes [ 133s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 133s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... (cached) none needed [ 133s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 133s] checking whether aarch64-tizen-linux-gnu-gcc supports C99 features... yes [ 133s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 133s] checking whether the compiler supports GNU C++... yes [ 134s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 134s] checking for aarch64-tizen-linux-gnu-g++ option to enable C++11 features... none needed [ 134s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 134s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 134s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 134s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 134s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 135s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 135s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 135s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 135s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 135s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 135s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 135s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 135s] checking how to hardcode library paths into programs... immediate [ 135s] checking whether aarch64-tizen-linux-gnu-g++ supports C++11... yes [ 135s] checking for gpatch... no [ 135s] checking for patch... patch [ 135s] checking for doxygen... no [ 135s] checking for dot... NO [ 135s] checking for gnutar... no [ 135s] checking for gtar... no [ 135s] checking for tar... tar [ 135s] checking for po4a >= 0.59... no [ 135s] checking for perl >= 5.32.1... (cached) /bin/perl [ 135s] checking for pod2man... pod2man [ 135s] checking whether to build with code coverage... no [ 135s] checking for special C compiler options needed for large files... no [ 135s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 135s] checking for library containing clock_gettime... none required [ 135s] checking for md5.h... yes [ 136s] checking for library containing MD5Init... -lmd [ 136s] checking for gzdopen in -lz... no [ 136s] checking for zng_gzdopen in -lz-ng... no [ 136s] checking for BZ2_bzdopen in -lbz2... no [ 136s] checking for lzma_alone_decoder in -llzma... no [ 136s] checking for lzma_stream_encoder_mt in -llzma... no [ 137s] checking for lzma_stream_decoder_mt in -llzma... no [ 137s] checking for ZSTD_compressStream2 in -lzstd... no [ 137s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 137s] checking pkg-config is at least version 0.9.0... yes [ 137s] checking for libselinux >= 2.3... no [ 137s] checking whether Unicode is requested... yes [ 137s] checking for ncurses/ncurses.h... yes [ 137s] checking for ncurses.h... yes [ 138s] checking for curses.h... yes [ 138s] checking for ncurses/term.h... yes [ 138s] checking for term.h... yes [ 138s] checking for ncursesw/ncurses.h... yes [ 138s] checking for ncursesw/term.h... yes [ 138s] checking for initscr in -lncursesw... yes [ 139s] checking for library containing tigetstr... -ltinfo [ 139s] checking for library containing bind... none required [ 139s] checking for proc_stat_list_create in -lps... no [ 139s] checking for kvm_openfiles in -lkvm... no [ 140s] checking for stddef.h... yes [ 140s] checking for error.h... yes [ 140s] checking for err.h... yes [ 140s] checking for locale.h... yes [ 140s] checking for xlocale.h... no [ 140s] checking for libintl.h... yes [ 140s] checking for kvm.h... no [ 140s] checking for sys/sysmacros.h... yes [ 140s] checking for sys/param.h... yes [ 140s] checking for sys/syscall.h... yes [ 140s] checking for sys/user.h... yes [ 141s] checking for sys/mkdev.h... no [ 141s] checking for sys/pstat.h... no [ 141s] checking for linux/fiemap.h... yes [ 141s] checking for sys/procfs.h... yes [ 141s] checking for sys/proc.h... no [ 141s] checking for cxxabi.h... yes [ 142s] checking size of short... 2 [ 142s] checking size of int... 4 [ 142s] checking size of long... 8 [ 142s] checking size of long long... 8 [ 143s] checking size of float... 4 [ 143s] checking size of double... 8 [ 143s] checking size of long double... 16 [ 143s] checking size of void *... 8 [ 144s] checking size of off_t... 8 [ 144s] checking size of time_t... 8 [ 144s] checking alignment of max_align_t... 16 [ 144s] checking whether char is unsigned... yes [ 145s] checking whether byte ordering is bigendian... no [ 145s] checking for an ANSI C-conforming const... yes [ 145s] checking for inline... inline [ 145s] checking for working volatile... yes [ 145s] checking for mode_t... yes [ 145s] checking for pid_t... yes [ 146s] checking for size_t... yes [ 146s] checking for ptrdiff_t... yes [ 146s] checking for struct psinfo... no [ 146s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 146s] checking for unistd.h... (cached) yes [ 146s] checking whether sys_siglist is declared... yes [ 146s] checking whether sys_errlist is declared... yes [ 146s] checking whether sys_nerr is declared... yes [ 146s] checking for va_copy... yes [ 147s] checking for C99 snprintf functions... yes [ 147s] checking whether fsync works on directories... yes [ 147s] checking whether offsetof is declared... yes [ 147s] checking whether makedev is declared... no [ 147s] checking whether WCOREDUMP is declared... yes [ 147s] checking whether TIOCNOTTY is declared... yes [ 147s] checking whether O_NOFOLLOW is declared... yes [ 147s] checking whether F_ALLOCSP64 is declared... no [ 147s] checking whether F_PREALLOCATE is declared... no [ 147s] checking whether P_tmpdir is declared... yes [ 147s] checking for program_invocation_short_name... yes [ 147s] checking for __progname... yes [ 147s] checking for getopt... yes [ 147s] checking for getopt_long... yes [ 148s] checking for obstack_free... yes [ 148s] checking for strchrnul... yes [ 148s] checking for strnlen... yes [ 148s] checking for strndup... yes [ 148s] checking for strerror... yes [ 148s] checking for strsignal... yes [ 148s] checking for asprintf... yes [ 148s] checking for scandir... yes [ 148s] checking for alphasort... yes [ 148s] checking for unsetenv... yes [ 148s] checking for memcpy... yes [ 149s] checking for lchown... yes [ 149s] checking for strtoimax... yes [ 149s] checking for isascii... yes [ 149s] checking for setsid... yes [ 149s] checking for getdtablesize... yes [ 149s] checking for getprocs64... no [ 149s] checking for getprogname... no [ 149s] checking for getexecname... no [ 149s] checking for lutimes... yes [ 149s] checking for fallocate... yes [ 149s] checking for posix_fallocate... yes [ 150s] checking for posix_fadvise... yes [ 150s] checking for uselocale... yes [ 150s] checking for __cxa_pure_virtual... yes [ 150s] checking dpkg cpu type... arm64 [ 151s] checking dpkg operating system type... linux [ 151s] checking dpkg architecture name... arm64 [ 151s] checking that generated files are newer than configure... done [ 151s] configure: creating ./config.status [ 153s] [ 153s] Configuration: [ 153s] Arch attributes: [ 153s] cpu name . . . . . . . . . . : arm64 [ 153s] os name . . . . . . . . . . . : linux [ 153s] arch name . . . . . . . . . . : arm64 [ 153s] arch bits . . . . . . . . . . : 64 [ 153s] arch endian . . . . . . . . . : little [ 153s] char bits . . . . . . . . . . : 8 [ 153s] char sign . . . . . . . . . . : unsigned [ 153s] sizeof(short) . . . . . . . . : 2 [ 153s] sizeof(int) . . . . . . . . . : 4 [ 153s] sizeof(long) . . . . . . . . : 8 [ 153s] sizeof(long long) . . . . . . : 8 [ 153s] sizeof(float) . . . . . . . . : 4 [ 153s] sizeof(double) . . . . . . . : 8 [ 153s] sizeof(long double) . . . . . : 16 [ 153s] sizeof(void *) . . . . . . . : 8 [ 153s] sizeof(off_t) . . . . . . . . : 8 [ 153s] sizeof(time_t) . . . . . . . : 8 [ 153s] alignof(max_align_t) . . . . : 16 [ 153s] [ 153s] Features: [ 153s] native language support . . . : yes [ 153s] unicode support . . . . . . . : yes [ 153s] development documentation . . : yes [ 153s] code coverage . . . . . . . . : no [ 153s] build shared libraries . . . : no [ 153s] mmap loaders . . . . . . . . : no [ 153s] disk pre-allocation . . . . . : no [ 153s] default dpkg-deb compressor . : xz [ 153s] default shell interpreter . . : sh [ 153s] default pager program . . . . : less [ 153s] [ 153s] Paths: [ 153s] devlibdir . . . . . . . . . . : /usr/lib64 [ 153s] pkgconfdir . . . . . . . . . : /etc/dpkg [ 153s] admindir . . . . . . . . . . : /var/lib/rpm/ [ 153s] backupsdir . . . . . . . . . : /var/backups [ 153s] logdir . . . . . . . . . . . : /var/log [ 153s] perl interpreter . . . . . . : /bin/perl [ 153s] perl libdir . . . . . . . . . : $(prefix)/lib64/perl5/vendor_perl/5.38.0 [ 153s] [ 153s] Programs: [ 153s] update-alternatives . . . . . : yes [ 153s] start-stop-daemon . . . . . . : yes [ 153s] dselect . . . . . . . . . . . : yes [ 153s] [ 153s] System Libraries: [ 153s] librt . . . . . . . . . . . . : builtin [ 153s] libsocket . . . . . . . . . . : builtin [ 153s] libps . . . . . . . . . . . . : no [ 153s] libkvm . . . . . . . . . . . : no [ 153s] libselinux . . . . . . . . . : no [ 153s] libmd . . . . . . . . . . . . : yes [ 153s] libz . . . . . . . . . . . . : no [ 153s] liblzma . . . . . . . . . . . : no [ 153s] libzstd . . . . . . . . . . . : no [ 153s] libbz2 . . . . . . . . . . . : no [ 153s] libcurses . . . . . . . . . . : yes [ 153s] /bin/sh ./config.status [ 154s] config.status: creating Makefile [ 154s] config.status: creating dselect/Makefile [ 154s] config.status: creating dselect/methods/Makefile [ 154s] config.status: creating dselect/po/Makefile.in [ 154s] config.status: creating lib/Makefile [ 154s] config.status: creating lib/compat/Makefile [ 154s] config.status: creating lib/dpkg/Makefile [ 154s] config.status: creating lib/dpkg/libdpkg.pc [ 154s] config.status: creating doc/Doxyfile [ 155s] config.status: creating man/Makefile [ 155s] config.status: creating po/Makefile.in [ 155s] config.status: creating scripts/Build.PL [ 155s] config.status: creating scripts/Makefile [ 155s] config.status: creating scripts/README.cpan [ 155s] config.status: creating scripts/mk/Makefile [ 155s] config.status: creating scripts/po/Makefile.in [ 155s] config.status: creating src/Makefile [ 155s] config.status: creating src/at/atlocal [ 155s] config.status: creating utils/Makefile [ 155s] config.status: creating config.h [ 155s] config.status: executing depfiles commands [ 156s] config.status: executing po-directories commands [ 156s] config.status: creating dselect/po/POTFILES [ 156s] config.status: creating dselect/po/Makefile [ 156s] config.status: creating po/POTFILES [ 156s] config.status: creating po/Makefile [ 156s] config.status: creating scripts/po/POTFILES [ 156s] config.status: creating scripts/po/Makefile [ 156s] config.status: executing libtool commands [ 156s] config.status: executing src/at/atconfig commands [ 156s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpkg-1.22.2' [ 156s] cd ../.. && make am--refresh [ 156s] cd ../.. && make am--refresh [ 156s] CC libcompat_test_la-strchrnul.lo [ 156s] CC libcompat_test_la-strnlen.lo [ 156s] CC libcompat_test_la-strndup.lo [ 156s] CC libcompat_test_la-strsignal.lo [ 156s] CC libcompat_test_la-snprintf.lo [ 156s] CC libcompat_test_la-vsnprintf.lo [ 156s] CC libcompat_test_la-asprintf.lo [ 156s] CC libcompat_test_la-vasprintf.lo [ 156s] CC libcompat_test_la-alphasort.lo [ 156s] CC libcompat_test_la-scandir.lo [ 156s] CC libcompat_test_la-unsetenv.lo [ 156s] CC libcompat_test_la-strerror.lo [ 156s] CC empty.lo [ 156s] CCLD libcompat.la [ 157s] CCLD libcompat-test.la [ 157s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/dpkg-1.22.2/lib/compat' [ 157s] + make -C utils/ -j12 [ 157s] make: Entering directory '/home/abuild/rpmbuild/BUILD/dpkg-1.22.2/utils' [ 157s] CC update_alternatives-update-alternatives.o [ 157s] CC start-stop-daemon.o [ 157s] GEN org.dpkg.pkexec.update-alternatives.policy [ 158s] CCLD start-stop-daemon [ 158s] CCLD update-alternatives [ 158s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/dpkg-1.22.2/utils' [ 158s] + exit 0 [ 158s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0Nk1Mb [ 158s] + umask 022 [ 158s] + cd /home/abuild/rpmbuild/BUILD [ 158s] + cd dpkg-1.22.2 [ 158s] + LANG=C [ 158s] + export LANG [ 158s] + unset DISPLAY [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 [ 158s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 [ 158s] + install -d -m 0755 /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64//usr/sbin/ [ 158s] + install -d -m 0755 /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64//etc/alternatives [ 158s] + install -d -m 0755 /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64//var/lib/rpm//alternatives [ 158s] + install -d -m 0755 /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64//var/log [ 158s] + install -m 0755 utils/update-alternatives /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64//usr/sbin [ 158s] + touch /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64//var/log/alternatives.log [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/info [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/doc/packages [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/doc/update-alternatives [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/doc/update-alternatives-1.22.2 [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/gtk-doc [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/doc [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/man [ 158s] + find /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 158s] + xargs rm -f -- [ 158s] + find /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 158s] + xargs rm -f -- [ 158s] + find /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 158s] + xargs rm -f -- [ 158s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.22.2-3.1 --unique-debug-src-base update-alternatives-1.22.2-3.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/dpkg-1.22.2 [ 159s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/sbin/update-alternatives [ 159s] 150 blocks [ 159s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dpkg-1.22.2/update-alternatives-debuginfo.manifest [ 159s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dpkg-1.22.2/update-alternatives-debugsource.manifest [ 159s] + /usr/lib/rpm/check-buildroot [ 159s] + /usr/lib/rpm//brp-compress [ 159s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 159s] + /usr/lib/rpm/brp-python-hardlink [ 159s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 [ 159s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/dpkg-1.22.2/isu.list [ 159s] ~/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 ~/rpmbuild/BUILD/dpkg-1.22.2 [ 159s] ~/rpmbuild/BUILD/dpkg-1.22.2 [ 159s] Processing files: update-alternatives-1.22.2-3.1.aarch64 [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.S6lo6e [ 159s] + umask 022 [ 159s] + cd /home/abuild/rpmbuild/BUILD [ 159s] + cd dpkg-1.22.2 [ 159s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/licenses/update-alternatives [ 159s] + export LC_ALL=C [ 159s] + LC_ALL=C [ 159s] + export LICENSEDIR [ 159s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/licenses/update-alternatives [ 159s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64/usr/share/licenses/update-alternatives [ 159s] + exit 0 [ 159s] Provides: update-alternatives = 1.22.2-3.1 update-alternatives(aarch-64) = 1.22.2-3.1 [ 159s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 159s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 159s] Processing files: update-alternatives-debugsource-1.22.2-3.1.aarch64 [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Provides: update-alternatives-debugsource = 1.22.2-3.1 update-alternatives-debugsource(aarch-64) = 1.22.2-3.1 [ 159s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 159s] Processing files: update-alternatives-debuginfo-1.22.2-3.1.aarch64 [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Provides: update-alternatives-debuginfo = 1.22.2-3.1 update-alternatives-debuginfo(aarch-64) = 1.22.2-3.1 [ 159s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 159s] Recommends: update-alternatives-debugsource(aarch-64) = 1.22.2-3.1 [ 159s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 [ 160s] Wrote: /home/abuild/rpmbuild/SRPMS/update-alternatives-1.22.2-3.1.src.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/update-alternatives-1.22.2-3.1.aarch64.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/update-alternatives-debugsource-1.22.2-3.1.aarch64.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/update-alternatives-debuginfo-1.22.2-3.1.aarch64.rpm [ 160s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.1yPHtb [ 160s] + umask 022 [ 160s] + cd /home/abuild/rpmbuild/BUILD [ 160s] + cd dpkg-1.22.2 [ 160s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/update-alternatives-1.22.2-3.1.aarch64 [ 160s] + exit 0 [ 160s] ... checking for files with abuild user/group [ 160s] ... creating baselibs [ 161s] ... comparing built packages with the former built [ 161s] /usr/lib/build/pkg-diff.sh [ 161s] compare /.build.oldpackages/update-alternatives-1.22.2-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/update-alternatives-1.22.2-3.1.src.rpm [ 161s] This is not a prerelease project. Compare the project name. [ 161s] comparing disturl_distribution [ 161s] --- old-disturl_distribution [ 161s] +++ new-disturl_distribution [ 161s] @@ -1 +1 @@ [ 161s] -obs://127.0.0.1/Tizen-Base/standard/3d6b924dc115b3d6e2694c5597d2b27e-update-alternatives Tizen-Base [ 161s] +obs://127.0.0.1/Tizen-Base/standard/abe40c300d7ad57666f09a89f622f8a7-update-alternatives Tizen-Base [ 161s] RPM meta information is different [ 161s] [ 161s] cf51b72b8652 finished "build update-alternatives.spec" at Thu May 30 03:40:17 UTC 2024. [ 161s] Retried build at Wed Jun 12 02:37:49 2024 returned same result, skipped Retried build at Wed Jul 3 03:46:39 2024 returned same result, skipped Retried build at Wed Jul 10 08:09:50 2024 returned same result, skipped Retried build at Wed Jul 24 00:41:34 2024 returned same result, skipped Retried build at Thu Jul 25 09:20:19 2024 returned same result, skipped