[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] a29ebebe2ae3 started "build perl-DBD-SQLite.spec" at Wed Jun 12 03:02:57 UTC 2024. [ 0s] [ 0s] Building perl-DBD-SQLite for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 '4fb418fbb3d4945c6ef63c7af57f58a8' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/perl-DBD-SQLite.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/perl-DBD-SQLite.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/perl-DBD-SQLite.spec build ... [ 2s] registering binfmt handlers for cross build [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/41] preinstalling libmagic-data... [ 5s] [2/41] preinstalling libncurses... [ 5s] [3/41] preinstalling setup... [ 6s] [4/41] preinstalling filesystem... [ 6s] [5/41] preinstalling glibc... [ 6s] [6/41] preinstalling libgcc... [ 7s] [7/41] preinstalling bash... [ 7s] [8/41] preinstalling diffutils... [ 7s] [9/41] preinstalling grep... [ 7s] [10/41] preinstalling libattr... [ 8s] [11/41] preinstalling libblkid... [ 8s] [12/41] preinstalling libbz2... [ 8s] [13/41] preinstalling libcap... [ 8s] [14/41] preinstalling libfreebl3... [ 9s] [15/41] preinstalling liblua... [ 9s] [16/41] preinstalling liblzma... [ 9s] [17/41] preinstalling libpopt... [ 9s] [18/41] preinstalling libreadline... [ 9s] [19/41] preinstalling libsmack... [ 10s] [20/41] preinstalling libsqlite... [ 10s] [21/41] preinstalling libuuid... [ 10s] [22/41] preinstalling libzstd1... [ 10s] [23/41] preinstalling nspr... [ 11s] [24/41] preinstalling sed... [ 11s] [25/41] preinstalling zlib... [ 11s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 28s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 33s] [28/41] preinstalling coreutils... [ 33s] [29/41] preinstalling libacl... [ 33s] [30/41] preinstalling libelf... [ 34s] [31/41] preinstalling libmount... [ 34s] [32/41] preinstalling smack... [ 34s] [33/41] preinstalling bzip2... [ 34s] [34/41] preinstalling libmagic... [ 34s] [35/41] preinstalling libxml2... [ 35s] [36/41] preinstalling tar... [ 35s] [37/41] preinstalling util-linux... [ 35s] [38/41] preinstalling util-linux-su... [ 36s] [39/41] preinstalling nss... [ 36s] [40/41] preinstalling libsoftokn3... [ 36s] [41/41] preinstalling rpm... [ 38s] running qemu-linux-user-x86_64-cross postinstall script [ 39s] running qemu-accel-x86_64-armv7hl postinstall script [ 39s] running setup postinstall script [ 39s] chroot: failed to run command '': No such file or directory [ 39s] initializing rpm db... [ 40s] reordering...cycle: libsoftokn3 -> nss [ 40s] breaking dependency nss -> libsoftokn3 [ 40s] done [ 40s] querying package ids... [ 43s] [1/95] cumulate libmagic-data-5.45-1.38 [ 43s] [2/95] cumulate setup-0.9-1.27 [ 43s] [3/95] cumulate filesystem-3.1-1.1 [ 43s] [4/95] cumulate glibc-2.30-2.35 [ 43s] [5/95] cumulate libatomic-9.2.0-1.63 [ 43s] [6/95] cumulate libgcc-9.2.0-1.63 [ 43s] [7/95] cumulate bash-3.2.57-3.1 [ 43s] [8/95] cumulate cpio-2.8-1.1 [ 43s] [9/95] cumulate diffutils-3.10-1.1 [ 43s] [10/95] cumulate findutils-4.3.8-3.15 [ 43s] [11/95] cumulate gdbm-1.8.3-2.8 [ 43s] [12/95] cumulate hostname-3.23-1.1 [ 43s] [13/95] cumulate libattr-2.5.1-2.5 [ 43s] [14/95] cumulate libblkid-2.39.3-3.3 [ 43s] [15/95] cumulate libbz2-1.0.8-1.62 [ 43s] [16/95] cumulate libcap-2.69-1.22 [ 43s] [17/95] cumulate libfreebl3-3.98-2.24 [ 43s] [18/95] cumulate libgfortran-9.2.0-1.63 [ 43s] [19/95] cumulate libgomp-9.2.0-1.63 [ 43s] [20/95] cumulate libitm-9.2.0-1.63 [ 43s] [21/95] cumulate libltdl-2.4.7-2.8 [ 43s] [22/95] cumulate liblua-5.1.5-1.61 [ 43s] [23/95] cumulate liblzma-5.4.5-2.3 [ 43s] [24/95] cumulate libopenssl3-3.0.13-1.29 [ 43s] [25/95] cumulate libpcre-8.45-2.5 [ 43s] [26/95] cumulate libpopt-1.16-1.61 [ 43s] [27/95] cumulate libsmack-1.3.1-1.61 [ 43s] [28/95] cumulate libsmartcols-2.39.3-3.3 [ 43s] [29/95] cumulate libsqlite-3.44.0-1.39 [ 43s] [30/95] cumulate libstdc++-9.2.0-1.63 [ 43s] [31/95] cumulate libuuid-2.39.3-3.3 [ 43s] [32/95] cumulate libzstd1-1.5.5-2.7 [ 43s] [33/95] cumulate m4-1.4.19-1.1 [ 43s] [34/95] cumulate net-tools-2.0_20121208git-2.7 [ 43s] [35/95] cumulate nspr-4.35-1.61 [ 43s] [36/95] cumulate patch-2.7.6-1.61 [ 43s] [37/95] cumulate pkg-config-0.29.2-2.5 [ 43s] [38/95] cumulate sed-4.1c-2.5 [ 43s] [39/95] cumulate update-alternatives-1.22.2-3.1 [ 43s] [40/95] cumulate which-2.17-2.1 [ 43s] [41/95] cumulate zlib-1.3-3.6 [ 43s] [42/95] cumulate build-compare-2023.06.18-2.2 [ 43s] [43/95] cumulate libstdc++-devel-9.2.0-1.63 [ 43s] [44/95] cumulate qemu-linux-user-x86_64-cross-5.2.0-22.4 [ 43s] [45/95] cumulate cpp-9.2.0-1.63 [ 43s] [46/95] cumulate gcc-c++-9.2.0-1.63 [ 43s] [47/95] cumulate binutils-2.33.1-1.71 [ 43s] [48/95] cumulate coreutils-6.9-17.1 [ 43s] [49/95] cumulate gawk-3.1.5-3.1 [ 43s] [50/95] cumulate grep-2.5.2-3.3 [ 43s] [51/95] cumulate libacl-2.3.2-1.22 [ 43s] [52/95] cumulate libcc1-9.2.0-1.63 [ 43s] [53/95] cumulate libelf-0.189-1.64 [ 43s] [54/95] cumulate libmount-2.39.3-3.3 [ 43s] [55/95] cumulate libubsan-9.2.0-1.63 [ 43s] [56/95] cumulate make-4.3-1.62 [ 43s] [57/95] cumulate nss-certs-3.98-2.24 [ 43s] [58/95] cumulate smack-1.3.1-1.61 [ 43s] [59/95] cumulate bzip2-1.0.8-1.62 [ 43s] [60/95] cumulate libfdisk-2.39.3-3.3 [ 43s] [61/95] cumulate libmagic-5.45-1.38 [ 43s] [62/95] cumulate libxml2-2.12.5-1.16 [ 43s] [63/95] cumulate perl-5.38.0-1.18 [ 43s] [64/95] cumulate xz-5.4.5-2.3 [ 43s] [65/95] cumulate build-mkbaselibs-20120927-2.1 [ 43s] [66/95] cumulate linux-glibc-devel-5.4-2.11 [ 43s] [67/95] cumulate terminfo-base-full-6.4-3.8 [ 43s] [68/95] cumulate autoconf-2.71-1.73 [ 43s] [69/95] cumulate file-5.45-1.38 [ 43s] [70/95] cumulate glibc-locale-2.30-2.35 [ 43s] [71/95] cumulate perl-DBI-1.628-2.1 [ 43s] [72/95] cumulate tar-1.17-3.1 [ 43s] [73/95] cumulate gzip-1.3.12-2.5 [ 43s] [74/95] cumulate pam-1.1.6-2.5 [ 43s] [75/95] cumulate tzdata-2023c-1.1 [ 43s] [76/95] cumulate libdw-0.189-1.64 [ 43s] [77/95] cumulate libarchive-3.7.2-1.46 [ 43s] [78/95] cumulate gcc-9.2.0-1.63 [ 43s] [79/95] cumulate glibc-devel-2.30-2.35 [ 43s] [80/95] cumulate qemu-accel-x86_64-armv7hl-0.4-2.34 [ 43s] [81/95] cumulate automake-1.16.5-1.71 [ 43s] [82/95] cumulate libasm-0.189-1.64 [ 43s] [83/95] cumulate libncurses6-6.4-3.8 [ 43s] [84/95] cumulate build-20120927-2.1 [ 43s] [85/95] cumulate libncurses-6.4-3.8 [ 43s] [86/95] cumulate less-643-2.1 [ 43s] [87/95] cumulate libreadline-5.2-2.5 [ 43s] [88/95] cumulate libtool-2.4.7-2.8 [ 43s] [89/95] cumulate elfutils-0.189-1.64 [ 43s] [90/95] cumulate util-linux-2.39.3-3.3 [ 43s] [91/95] cumulate util-linux-su-2.39.3-3.3 [ 43s] [92/95] cumulate nss-3.98-2.24 [ 43s] [93/95] cumulate libsoftokn3-3.98-2.24 [ 43s] [94/95] cumulate rpm-4.14.1.1-4.4 [ 43s] [95/95] cumulate rpm-build-4.14.1.1-4.4 [ 43s] now installing cumulated packages [ 46s] Preparing... ######################################## [ 46s] Updating / installing... [ 46s] setup-0.9-1.27 ######################################## [ 46s] filesystem-3.1-1.1 ######################################## [ 46s] libmagic-data-5.45-1.38 ######################################## [ 46s] glibc-2.30-2.35 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 46s] ######################################## [ 47s] libgcc-9.2.0-1.63 ######################################## [ 47s] bash-3.2.57-3.1 ######################################## [ 47s] zlib-1.3-3.6 ######################################## [ 48s] coreutils-6.9-17.1 ######################################## [ 48s] libstdc++-9.2.0-1.63 ######################################## [ 49s] libbz2-1.0.8-1.62 ######################################## [ 49s] liblzma-5.4.5-2.3 ######################################## [ 49s] libelf-0.189-1.64 ######################################## [ 49s] libdw-0.189-1.64 ######################################## [ 50s] libmagic-5.45-1.38 ######################################## [ 50s] libblkid-2.39.3-3.3 ######################################## [ 51s] nspr-4.35-1.61 ######################################## [ 53s] binutils-2.33.1-1.71 ######################################## [ 53s] pam-1.1.6-2.5 ######################################## [ 53s] libcap-2.69-1.22 ######################################## [ 54s] libfreebl3-3.98-2.24 ######################################## [ 54s] liblua-5.1.5-1.61 ######################################## [ 55s] libpopt-1.16-1.61 ######################################## [ 55s] libuuid-2.39.3-3.3 ######################################## [ 55s] libzstd1-1.5.5-2.7 ######################################## [ 56s] linux-glibc-devel-5.4-2.11 ######################################## [ 57s] terminfo-base-full-6.4-3.8 ######################################## [ 57s] libncurses6-6.4-3.8 ######################################## [ 57s] libreadline-5.2-2.5 ######################################## [ 58s] glibc-devel-2.30-2.35 ######################################## [ 58s] libfdisk-2.39.3-3.3 ######################################## [ 58s] nss-certs-3.98-2.24 ######################################## [ 59s] libmount-2.39.3-3.3 ######################################## [ 59s] libasm-0.189-1.64 ######################################## [ 59s] libxml2-2.12.5-1.16 ######################################## [ 59s] xz-5.4.5-2.3 ######################################## [ 59s] bzip2-1.0.8-1.62 ######################################## [ 59s] libcc1-9.2.0-1.63 ######################################## [ 60s] libubsan-9.2.0-1.63 ######################################## [ 60s] gzip-1.3.12-2.5 ######################################## [ 60s] make-4.3-1.62 ######################################## [ 60s] findutils-4.3.8-3.15 ######################################## [ 60s] gdbm-1.8.3-2.8 ######################################## [ 65s] perl-5.38.0-1.18 ######################################## [ 65s] build-mkbaselibs-20120927-2.1 ######################################## [ 65s] libattr-2.5.1-2.5 ######################################## [ 65s] libacl-2.3.2-1.22 ######################################## [ 66s] tar-1.17-3.1 ######################################## [ 66s] libgfortran-9.2.0-1.63 ######################################## [ 66s] libgomp-9.2.0-1.63 ######################################## [ 67s] libitm-9.2.0-1.63 ######################################## [ 67s] libltdl-2.4.7-2.8 ######################################## [ 68s] libopenssl3-3.0.13-1.29 ######################################## [ 68s] libarchive-3.7.2-1.46 ######################################## [ 68s] libpcre-8.45-2.5 ######################################## [ 69s] libsmack-1.3.1-1.61 ######################################## [ 69s] libsmartcols-2.39.3-3.3 ######################################## [ 69s] libsqlite-3.44.0-1.39 ######################################## [ 70s] libsoftokn3-3.98-2.24 ######################################## [ 70s] nss-3.98-2.24 ######################################## [ 71s] rpm-4.14.1.1-4.4 ######################################## [ 72s] m4-1.4.19-1.1 ######################################## [ 72s] autoconf-2.71-1.73 ######################################## [ 73s] automake-1.16.5-1.71 ######################################## [ 73s] patch-2.7.6-1.61 ######################################## [ 73s] sed-4.1c-2.5 ######################################## [ 73s] util-linux-2.39.3-3.3 ######################################## [ 73s] libatomic-9.2.0-1.63 ######################################## [ 74s] libtool-2.4.7-2.8 ######################################## [ 74s] build-20120927-2.1 ######################################## [ 74s] libncurses-6.4-3.8 ######################################## [ 75s] libstdc++-devel-9.2.0-1.63 ######################################## [ 75s] build-compare-2023.06.18-2.2 ######################################## [ 79s] qemu-linux-user-x86_64-cross-5.2.0-22.######################################## [ 82s] gcc-9.2.0-1.63 ######################################## [ 98s] qemu-accel-x86_64-armv7hl-0.4-2.34 ######################################## [ 99s] rpm-build-4.14.1.1-4.4 ######################################## [ 99s] util-linux-su-2.39.3-3.3 ######################################## [ 99s] smack-1.3.1-1.61 ######################################## [ 99s] grep-2.5.2-3.3 ######################################## [ 99s] perl-DBI-1.628-2.1 ######################################## [ 99s] elfutils-0.189-1.64 ######################################## [ 99s] less-643-2.1 ######################################## [ 99s] file-5.45-1.38 ######################################## [ 100s] glibc-locale-2.30-2.35 ######################################## [ 101s] tzdata-2023c-1.1 ######################################## [ 103s] cpp-9.2.0-1.63 ######################################## [ 105s] gcc-c++-9.2.0-1.63 ######################################## [ 105s] gawk-3.1.5-3.1 ######################################## [ 105s] cpio-2.8-1.1 ######################################## [ 105s] diffutils-3.10-1.1 ######################################## [ 105s] hostname-3.23-1.1 ######################################## [ 105s] net-tools-2.0_20121208git-2.7 ######################################## [ 105s] pkg-config-0.29.2-2.5 ######################################## [ 105s] update-alternatives-1.22.2-3.1 ######################################## [ 105s] which-2.17-2.1 ######################################## [ 107s] now finalizing build dir... [ 111s] ----------------------------------------------------------------- [ 111s] I have the following modifications for perl-DBD-SQLite.spec: [ 111s] 22c22 [ 111s] < Release: 0 [ 111s] --- [ 111s] > Release: 3.1 [ 112s] build target is armv7hl-tizen-linux [ 112s] ----------------------------------------------------------------- [ 112s] ----- building perl-DBD-SQLite.spec (user abuild) [ 112s] ----------------------------------------------------------------- [ 112s] ----------------------------------------------------------------- [ 113s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/4fb418fbb3d4945c6ef63c7af57f58a8-perl-DBD-SQLite' /home/abuild/rpmbuild/SOURCES/perl-DBD-SQLite.spec [ 120s] Building target platforms: armv7hl-tizen-linux [ 120s] Building for target armv7hl-tizen-linux [ 120s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.RXexd6 [ 120s] + umask 022 [ 120s] + cd /home/abuild/rpmbuild/BUILD [ 120s] + cd /home/abuild/rpmbuild/BUILD [ 120s] + rm -rf DBD-SQLite-1.50 [ 120s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/DBD-SQLite-1.50.tar.gz [ 120s] + /bin/tar -xof - [ 120s] + STATUS=0 [ 120s] + '[' 0 -ne 0 ']' [ 120s] + cd DBD-SQLite-1.50 [ 120s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 120s] + echo 'Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):' [ 120s] Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch): [ 120s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 120s] patching file SQLite.xs [ 120s] + find . -type f '!' -name '*.pl' -print0 [ 120s] + xargs -0 chmod 644 [ 121s] + exit 0 [ 121s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.pgf986 [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd DBD-SQLite-1.50 [ 121s] + ref=/usr/lib/rpm [ 121s] + mints=0 [ 121s] + case $(uname -m) in [ 121s] ++ uname -m [ 121s] + for s in guess sub [ 121s] ++ find -maxdepth 8 -name config.guess [ 121s] + for s in guess sub [ 121s] ++ find -maxdepth 8 -name config.sub [ 121s] + LANG=C [ 121s] + export LANG [ 121s] + unset DISPLAY [ 121s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 121s] + export CFLAGS [ 121s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 121s] + export CXXFLAGS [ 121s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 121s] + export FFLAGS [ 121s] + LDFLAGS= [ 121s] + export LDFLAGS [ 121s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 123s] Checking if your kit is complete... [ 123s] Looks good [ 124s] Using DBI 1.628 (for perl 5.038000 on armv7l-linux-thread-multi) installed in /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI/ [ 124s] Generating a Unix-style Makefile [ 124s] Writing Makefile for DBD::SQLite [ 124s] Writing MYMETA.yml and MYMETA.json [ 124s] + /bin/make -j12 [ 124s] "/usr/bin/perl" -p -e "s/~DRIVER~/SQLite/g" /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI/Driver.xst > SQLite.xsi [ 124s] cc -c -I. -I/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 dbdimp.c [ 124s] Running Mkbootstrap for SQLite () [ 124s] In file included from SQLiteXS.h:11, [ 124s] from dbdimp.c:6: [ 124s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059: warning: "PERL_USE_SAFE_PUTENV" redefined [ 124s] 1059 | #define PERL_USE_SAFE_PUTENV [ 124s] | [ 124s] : note: this is the location of the previous definition [ 125s] cc -c -I. -I/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 sqlite3.c [ 125s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/typemap' SQLite.xs > SQLite.xsc [ 125s] chmod 644 "SQLite.bs" [ 125s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 125s] dbdimp.c: In function 'sqlite_db_do_sv': [ 125s] dbdimp.c:485:9: warning: unused variable 'i' [-Wunused-variable] [ 125s] 485 | int i; [ 125s] | ^ [ 125s] dbdimp.c: In function 'sqlite_db_disconnect': [ 125s] dbdimp.c:636:17: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 125s] 636 | while ( s = imp_dbh->stmt_list ) { [ 125s] | ^ [ 125s] dbdimp.c:651:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 125s] 651 | while( s = imp_dbh->stmt_list ) { [ 125s] | ^ [ 125s] dbdimp.c: In function 'sqlite_st_prepare_sv': [ 125s] dbdimp.c:865:9: warning: the address of 'extra' will always evaluate as 'true' [-Waddress] [ 125s] 865 | if (&extra && imp_dbh->allow_multiple_statements) { [ 125s] | ^ [ 125s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6168, [ 125s] from SQLiteXS.h:11, [ 125s] from dbdimp.c:6: [ 125s] dbdimp.c: In function 'sqlite_db_func_dispatcher': [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1635:9: note: in expansion of macro 'POPs' [ 125s] 1635 | POPs; [ 125s] | ^~~~ [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1643:13: note: in expansion of macro 'POPs' [ 125s] 1643 | POPs; [ 125s] | ^~~~ [ 125s] dbdimp.c: In function 'sqlite_db_aggr_new_dispatcher': [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1820:9: note: in expansion of macro 'POPs' [ 125s] 1820 | POPs; [ 125s] | ^~~~ [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1828:13: note: in expansion of macro 'POPs' [ 125s] 1828 | POPs; [ 125s] | ^~~~ [ 125s] dbdimp.c: In function 'sqlite_db_aggr_step_dispatcher': [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1885:7: note: in expansion of macro 'POPs' [ 125s] 1885 | POPs; [ 125s] | ^~~~ [ 125s] dbdimp.c: In function 'sqlite_db_aggr_finalize_dispatcher': [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1926:13: note: in expansion of macro 'POPs' [ 125s] 1926 | POPs; [ 125s] | ^~~~ [ 125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 125s] 162 | #define POPs (*sp--) [ 125s] | ~^~~~~~ [ 125s] dbdimp.c:1933:17: note: in expansion of macro 'POPs' [ 125s] 1933 | POPs; [ 125s] | ^~~~ [ 125s] dbdimp.c: In function 'sqlite_db_trace_dispatcher': [ 125s] dbdimp.c:2413:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable] [ 125s] 2413 | int retval = 0; [ 125s] | ^~~~~~ [ 125s] dbdimp.c: In function 'sqlite_db_profile_dispatcher': [ 125s] dbdimp.c:2471:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable] [ 125s] 2471 | int retval = 0; [ 125s] | ^~~~~~ [ 125s] dbdimp.c: In function 'perl_tokenizer_Next': [ 125s] dbdimp.c:2803:12: warning: unused variable 'n_a' [-Wunused-variable] [ 125s] 2803 | STRLEN n_a; /* this is required for older perls < 5.8.8 */ [ 125s] | ^~~ [ 125s] dbdimp.c: In function 'sqlite_db_destroy_module_data': [ 125s] dbdimp.c:3664:9: warning: unused variable 'rc' [-Wunused-variable] [ 125s] 3664 | int rc = SQLITE_ERROR; [ 125s] | ^~ [ 125s] In file included from SQLiteXS.h:17, [ 125s] from dbdimp.c:6: [ 125s] At top level: [ 125s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function] [ 125s] 149 | newUTF8SVpvn(char *s, STRLEN len) { [ 125s] | ^~~~~~~~~~~~ [ 125s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function] [ 125s] 139 | newUTF8SVpv(char *s, STRLEN len) { [ 125s] | ^~~~~~~~~~~ [ 126s] cp lib/DBD/SQLite/Cookbook.pod blib/lib/DBD/SQLite/Cookbook.pod [ 126s] cp lib/DBD/SQLite/VirtualTable/FileContent.pm blib/lib/DBD/SQLite/VirtualTable/FileContent.pm [ 126s] cp lib/DBD/SQLite/VirtualTable/PerlData.pm blib/lib/DBD/SQLite/VirtualTable/PerlData.pm [ 126s] cp lib/DBD/SQLite/Fulltext_search.pod blib/lib/DBD/SQLite/Fulltext_search.pod [ 126s] cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm [ 126s] cp lib/DBD/SQLite/VirtualTable.pm blib/lib/DBD/SQLite/VirtualTable.pm [ 126s] cp lib/DBD/SQLite/Constants.pm blib/lib/DBD/SQLite/Constants.pm [ 127s] dbdimp.c: In function 'perl_vt_Eof': [ 127s] dbdimp.c:3378:12: warning: 'eof' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 127s] 3378 | return eof; [ 127s] | ^~~ [ 129s] mv SQLite.xsc SQLite.c [ 129s] cc -c -I. -I/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 SQLite.c [ 130s] In file included from SQLiteXS.h:11, [ 130s] from SQLite.xs:3: [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059: warning: "PERL_USE_SAFE_PUTENV" redefined [ 130s] 1059 | #define PERL_USE_SAFE_PUTENV [ 130s] | [ 130s] : note: this is the location of the previous definition [ 130s] In file included from SQLiteXS.h:12, [ 130s] from SQLite.xs:3: [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_last_insert_rowid': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_create_function': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_enable_load_extension': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_load_extension': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_create_aggregate': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_create_collation': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_collation_needed': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_progress_handler': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_profile': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_commit_hook': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_rollback_hook': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_update_hook': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_set_authorizer': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_busy_timeout': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_from_file': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_to_file': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_table_column_metadata': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_db_filename': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_register_fts3_perl_tokenizer': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_db_status': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__db_create_module': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite__st_st_status': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 130s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 130s] | ^~ [ 130s] SQLite.c: In function 'XS_DBD__SQLite_compile_options': [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:189:28: warning: unused variable 'targ' [-Wunused-variable] [ 130s] 189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \ [ 130s] | ^~~~ [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:189:28: note: in definition of macro 'dXSTARG' [ 130s] 189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \ [ 130s] | ^~~~ [ 130s] SQLite.c:842:6: warning: unused variable 'RETVAL' [-Wunused-variable] [ 130s] 842 | int RETVAL; [ 130s] | ^~~~~~ [ 130s] ./SQLite.xsi: In function 'XS_DBD__SQLite__db_selectrow_arrayref': [ 130s] ./SQLite.xsi:208:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] [ 130s] 208 | if (GIMME == G_SCALAR) [ 130s] | ^~ [ 130s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6188, [ 130s] from SQLiteXS.h:11, [ 130s] from SQLite.xs:3: [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/proto.h:1019:1: note: declared here [ 130s] 1019 | Perl_dowantarray(pTHX) [ 130s] | ^~~~~~~~~~~~~~~~ [ 130s] ./SQLite.xsi:214:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] [ 130s] 214 | if (GIMME == G_SCALAR) [ 130s] | ^~ [ 130s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6188, [ 130s] from SQLiteXS.h:11, [ 130s] from SQLite.xs:3: [ 130s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/proto.h:1019:1: note: declared here [ 130s] 1019 | Perl_dowantarray(pTHX) [ 130s] | ^~~~~~~~~~~~~~~~ [ 130s] In file included from SQLiteXS.h:17, [ 130s] from SQLite.xs:3: [ 130s] At top level: [ 130s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function] [ 130s] 149 | newUTF8SVpvn(char *s, STRLEN len) { [ 130s] | ^~~~~~~~~~~~ [ 130s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function] [ 130s] 139 | newUTF8SVpv(char *s, STRLEN len) { [ 130s] | ^~~~~~~~~~~ [ 215s] rm -f blib/arch/auto/DBD/SQLite/SQLite.so [ 215s] cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib -Wl,-Bsymbolic SQLite.o dbdimp.o sqlite3.o -o blib/arch/auto/DBD/SQLite/SQLite.so \ [ 215s] \ [ 215s] [ 215s] chmod 755 blib/arch/auto/DBD/SQLite/SQLite.so [ 221s] Manifying 7 pod documents [ 221s] + exit 0 [ 221s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.RKyTC4 [ 221s] + umask 022 [ 221s] + cd /home/abuild/rpmbuild/BUILD [ 221s] + cd DBD-SQLite-1.50 [ 221s] + LANG=C [ 221s] + export LANG [ 221s] + unset DISPLAY [ 221s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm [ 221s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm [ 221s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm install_vendor [ 223s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 225s] Manifying 7 pod documents [ 227s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite.pm [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite::VirtualTable.3 [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite::VirtualTable::PerlData.3 [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite.3 [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite::Fulltext_search.3 [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite::VirtualTable::FileContent.3 [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite::Constants.3 [ 227s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man/man3/DBD::SQLite::Cookbook.3 [ 227s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 228s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 228s] + find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 228s] + xargs -0 -r rm [ 228s] + '[' armv7hl == noarch ']' [ 228s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 228s] + FILES=perl-DBD-SQLite.files [ 228s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 228s] + RES= [ 228s] + '[' -n '' ']' [ 228s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ [ 228s] ++ sort [ 228s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d [ 228s] + for dir in '`find ${base_dir} -type d | sort`' [ 228s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 228s] + continue [ 228s] + for dir in '`find ${base_dir} -type d | sort`' [ 228s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 228s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 228s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 228s] + el=armv7l-linux-thread-multi [ 228s] + all_dir=(${all_dir[@]} $el) [ 228s] + for dir in '`find ${base_dir} -type d | sort`' [ 228s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 228s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 228s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD [ 228s] + el=armv7l-linux-thread-multi/DBD [ 228s] + all_dir=(${all_dir[@]} $el) [ 228s] + for dir in '`find ${base_dir} -type d | sort`' [ 228s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 228s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 228s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite [ 228s] + el=armv7l-linux-thread-multi/DBD/SQLite [ 228s] + all_dir=(${all_dir[@]} $el) [ 228s] + for dir in '`find ${base_dir} -type d | sort`' [ 228s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 228s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 228s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable [ 228s] + el=armv7l-linux-thread-multi/DBD/SQLite/VirtualTable [ 228s] + all_dir=(${all_dir[@]} $el) [ 228s] + for dir in '`find ${base_dir} -type d | sort`' [ 228s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 228s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 229s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 229s] + el=armv7l-linux-thread-multi/auto [ 229s] + all_dir=(${all_dir[@]} $el) [ 229s] + for dir in '`find ${base_dir} -type d | sort`' [ 229s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 229s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 229s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD [ 229s] + el=armv7l-linux-thread-multi/auto/DBD [ 229s] + all_dir=(${all_dir[@]} $el) [ 229s] + for dir in '`find ${base_dir} -type d | sort`' [ 229s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 229s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite [ 229s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 229s] + el=armv7l-linux-thread-multi/auto/DBD/SQLite [ 229s] + all_dir=(${all_dir[@]} $el) [ 229s] + for dir in '`find ${base_dir} -type d | sort`' [ 229s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 229s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share [ 229s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 229s] + el=armv7l-linux-thread-multi/auto/share [ 229s] + all_dir=(${all_dir[@]} $el) [ 229s] + for dir in '`find ${base_dir} -type d | sort`' [ 229s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 229s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist [ 229s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 229s] + el=armv7l-linux-thread-multi/auto/share/dist [ 229s] + all_dir=(${all_dir[@]} $el) [ 229s] + for dir in '`find ${base_dir} -type d | sort`' [ 229s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 229s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite [ 229s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 229s] + el=armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite [ 229s] + all_dir=(${all_dir[@]} $el) [ 229s] + for i in '${all_dir[@]}' [ 229s] + '[' armv7l-linux-thread-multi = auto ']' [ 229s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 229s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']' [ 229s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 229s] + RES= [ 229s] + '[' -n '' ']' [ 229s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 229s] + /bin/cat [ 229s] + for i in '${all_dir[@]}' [ 229s] + '[' armv7l-linux-thread-multi/DBD = auto ']' [ 229s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 229s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD ']' [ 229s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD -maxdepth 1 -type f [ 229s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite.pm [ 229s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite.pm ']' [ 229s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD [ 229s] + /bin/cat [ 229s] + for file in '$RES' [ 229s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite.pm [ 229s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite.pm [ 229s] + /bin/cat [ 229s] + for i in '${all_dir[@]}' [ 229s] + '[' armv7l-linux-thread-multi/DBD/SQLite = auto ']' [ 229s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 229s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite ']' [ 229s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite -maxdepth 1 -type f [ 229s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 229s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 229s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 229s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' [ 229s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 229s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 229s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 229s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' ']' [ 229s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite [ 229s] + /bin/cat [ 229s] + for file in '$RES' [ 229s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 229s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 229s] + /bin/cat [ 229s] + for file in '$RES' [ 229s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 229s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 229s] + /bin/cat [ 229s] + for file in '$RES' [ 229s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 229s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 229s] + /bin/cat [ 229s] + for file in '$RES' [ 230s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 230s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 230s] + /bin/cat [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable ']' [ 230s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable -maxdepth 1 -type f [ 230s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 230s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' [ 230s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 230s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' ']' [ 230s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable [ 230s] + /bin/cat [ 230s] + for file in '$RES' [ 230s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 230s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 230s] + /bin/cat [ 230s] + for file in '$RES' [ 230s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 230s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 230s] + /bin/cat [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + continue [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/auto/DBD = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD ']' [ 230s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD -maxdepth 1 -type f [ 230s] + RES= [ 230s] + '[' -n '' ']' [ 230s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD [ 230s] + /bin/cat [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/auto/DBD/SQLite = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite ']' [ 230s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite -maxdepth 1 -type f [ 230s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 230s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so ']' [ 230s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite [ 230s] + /bin/cat [ 230s] + for file in '$RES' [ 230s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 230s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 230s] + /bin/cat [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/auto/share = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share ']' [ 230s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share -maxdepth 1 -type f [ 230s] + RES= [ 230s] + '[' -n '' ']' [ 230s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share [ 230s] + /bin/cat [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/auto/share/dist = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist ']' [ 230s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist -maxdepth 1 -type f [ 230s] + RES= [ 230s] + '[' -n '' ']' [ 230s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist [ 230s] + /bin/cat [ 230s] + for i in '${all_dir[@]}' [ 230s] + '[' armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = auto ']' [ 230s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 230s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite ']' [ 230s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite -maxdepth 1 -type f [ 230s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 230s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 230s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' [ 230s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 230s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 230s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' ']' [ 230s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite [ 230s] + /bin/cat [ 230s] + for file in '$RES' [ 230s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 230s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 230s] + /bin/cat [ 230s] + for file in '$RES' [ 230s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 231s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 231s] + /bin/cat [ 231s] + for file in '$RES' [ 231s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 231s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 231s] + /bin/cat [ 231s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/man ']' [ 231s] + fgen_file '/usr/share/man/man?/*' [ 231s] + /bin/cat [ 231s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/var/adm/perl-modules/perl-DBD-SQLite ']' [ 231s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/bin ']' [ 231s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.50-3.1 --unique-debug-src-base perl-DBD-SQLite-1.50-3.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50 [ 232s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 233s] 14560 blocks [ 233s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debuginfo.manifest [ 233s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debugsource.manifest [ 233s] + /usr/lib/rpm/check-buildroot [ 234s] + /usr/lib/rpm//brp-compress [ 234s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 235s] + /usr/lib/rpm/brp-python-hardlink [ 235s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm [ 236s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/isu.list [ 236s] ~/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm ~/rpmbuild/BUILD/DBD-SQLite-1.50 [ 236s] ~/rpmbuild/BUILD/DBD-SQLite-1.50 [ 236s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.ua3A46 [ 236s] + umask 022 [ 236s] + cd /home/abuild/rpmbuild/BUILD [ 236s] + cd DBD-SQLite-1.50 [ 236s] + /bin/make test [ 238s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 239s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/**/*.t [ 242s] # $DBI::VERSION=1.628 [ 242s] # Compile Options: [ 242s] # ENABLE_COLUMN_METADATA [ 242s] # ENABLE_FTS3 [ 242s] # ENABLE_FTS3_PARENTHESIS [ 242s] # ENABLE_FTS4 [ 242s] # ENABLE_JSON1 [ 242s] # ENABLE_RTREE [ 242s] # ENABLE_STAT4 [ 242s] # SYSTEM_MALLOC [ 242s] # THREADSAFE=1 [ 242s] t/01_compile.t ........................................ ok [ 244s] # sqlite_version=3.10.2 [ 244s] t/02_logon.t .......................................... ok [ 247s] t/03_create_table.t ................................... ok [ 249s] t/04_insert.t ......................................... ok [ 251s] t/05_select.t ......................................... ok [ 253s] t/06_tran.t ........................................... ok [ 255s] t/07_error.t .......................................... ok [ 262s] t/08_busy.t ........................................... ok [ 264s] t/09_create_function.t ................................ ok [ 265s] t/10_create_aggregate.t ............................... ok [ 267s] t/12_unicode.t ........................................ ok [ 269s] t/13_create_collation.t ............................... ok [ 271s] t/14_progress_handler.t ............................... ok [ 274s] t/15_ak_dbd.t ......................................... ok [ 276s] t/16_column_info.t .................................... ok [ 277s] t/17_createdrop.t ..................................... ok [ 279s] t/18_insertfetch.t .................................... ok [ 280s] t/19_bindparam.t ...................................... ok [ 282s] t/20_blobs.t .......................................... ok [ 283s] t/21_blobtext.t ....................................... ok [ 284s] t/22_listfields.t ..................................... ok [ 286s] t/23_nulls.t .......................................... ok [ 287s] t/24_numrows.t ........................................ ok [ 289s] t/25_chopblanks.t ..................................... ok [ 290s] t/26_commit.t ......................................... ok [ 292s] t/27_metadata.t ....................................... ok [ 296s] t/28_schemachange.t ................................... ok [ 298s] t/30_auto_rollback.t .................................. ok [ 300s] t/31_bind_weird_number_param.t ........................ ok [ 301s] t/32_inactive_error.t ................................. ok [ 303s] t/33_non_latin_path.t ................................. ok [ 305s] t/34_online_backup.t .................................. ok [ 307s] t/35_table_info.t ..................................... ok [ 309s] t/36_hooks.t .......................................... ok [ 310s] t/37_regexp.t ......................................... ok [ 311s] t/38_empty_statement.t ................................ ok [ 313s] t/39_foreign_keys.t ................................... ok [ 315s] t/40_multiple_statements.t ............................ ok [ 317s] t/41_placeholders.t ................................... ok [ 319s] t/42_primary_key_info.t ............................... ok [ 321s] t/43_fts3.t ........................................... ok [ 322s] t/44_rtree.t .......................................... ok [ 324s] t/45_savepoints.t ..................................... ok [ 325s] t/46_mod_perl.t ....................................... skipped: requires APR::Table [ 327s] t/47_execute.t ........................................ ok [ 329s] t/48_bind_param_is_sticky.t ........................... ok [ 330s] t/49_trace_and_profile.t .............................. ok [ 331s] t/50_foreign_key_info.t ............................... ok [ 332s] t/51_table_column_metadata.t .......................... ok [ 334s] t/52_db_filename.t .................................... ok [ 335s] t/53_status.t ......................................... ok [ 337s] t/54_literal_txn.t .................................... ok [ 339s] t/55_statistics_info.t ................................ ok [ 340s] t/56_open_flags.t ..................................... ok [ 341s] t/57_uri_filename.t ................................... ok [ 343s] t/58_see_if_its_a_number_and_explicit_binding.t ....... ok [ 344s] t/59_extended_result_codes.t .......................... skipped: this test is for Win32 only [ 346s] t/60_readonly.t ....................................... ok [ 347s] t/61_strlike.t ........................................ ok [ 349s] t/cookbook_variance.t ................................. ok [ 350s] t/rt_106151_outermost_savepoint.t ..................... ok [ 352s] t/rt_106950_extra_warnings_with_savepoints.t .......... ok [ 353s] t/rt_15186_prepcached.t ............................... ok [ 354s] t/rt_21406_auto_finish.t .............................. ok [ 356s] t/rt_25371_asymmetric_unicode.t ....................... ok [ 357s] t/rt_25460_numeric_aggregate.t ........................ ok [ 358s] t/rt_25924_user_defined_func_unicode.t ................ ok [ 360s] t/rt_26775_distinct.t ................................. ok [ 361s] t/rt_27553_prepared_cache_and_analyze.t ............... ok [ 363s] t/rt_29058_group_by.t ................................. ok [ 364s] t/rt_29629_sqlite_where_length.t ...................... ok [ 365s] t/rt_31324_full_names.t ............................... ok [ 367s] t/rt_32889_prepare_cached_reexecute.t ................. ok [ 369s] t/rt_36836_duplicate_key.t ............................ ok [ 370s] t/rt_36838_unique_and_bus_error.t ..................... ok [ 372s] t/rt_40594_nullable.t ................................. ok [ 373s] t/rt_48393_debug_panic_with_commit.t .................. skipped: set $ENV{TEST_DBD_SQLITE_WITH_DEBUGGER} to enable this test [ 374s] t/rt_50503_fts3.t ..................................... ok [ 376s] t/rt_52573_manual_exclusive_lock.t .................... ok [ 377s] t/rt_53235_icu_compatibility.t ........................ skipped: requires SQLite ICU plugin to be enabled [ 379s] t/rt_62370_diconnected_handles_operation.t ............ ok [ 380s] t/rt_64177_ping_wipes_out_the_errstr.t ................ ok [ 381s] t/rt_67581_bind_params_mismatch.t ..................... ok [ 383s] t/rt_71311_bind_col_and_unicode.t ..................... ok [ 384s] t/rt_73159_fts_tokenizer_segfault.t ................... ok [ 386s] t/rt_73787_exponential_buffer_overflow.t .............. ok [ 389s] t/rt_76395_int_overflow.t ............................. ok [ 390s] t/rt_77724_primary_key_with_a_whitespace.t ............ ok [ 391s] t/rt_78833_utf8_flag_for_column_names.t ............... ok [ 393s] t/rt_81536_multi_column_primary_key_info.t ............ ok [ 394s] t/rt_88228_sqlite_3_8_0_crash.t ....................... ok [ 395s] t/rt_96050_db_filename_for_a_closed_database.t ........ ok [ 396s] t/rt_96877_unicode_statements.t ....................... ok [ 397s] t/rt_96878_fts_contentless_table.t .................... ok [ 398s] t/rt_97598_crash_on_disconnect_with_virtual_tables.t .. ok [ 400s] t/virtual_table/00_base.t ............................. ok [ 401s] t/virtual_table/01_destroy.t .......................... ok [ 403s] t/virtual_table/02_find_function.t .................... ok [ 404s] t/virtual_table/10_filecontent.t ...................... ok [ 406s] t/virtual_table/11_filecontent_fulltext.t ............. ok [ 407s] t/virtual_table/20_perldata.t ......................... ok [ 410s] t/virtual_table/21_perldata_charinfo.t ................ ok [ 411s] t/virtual_table/rt_99748.t ............................ ok [ 411s] All tests successful. [ 411s] Files=103, Tests=3561, 171 wallclock secs ( 2.94 usr 0.13 sys + 99.19 cusr 2.34 csys = 104.60 CPU) [ 411s] Result: PASS [ 411s] + exit 0 [ 411s] Processing files: perl-DBD-SQLite-1.50-3.1.armv7hl [ 411s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.gc4XF3 [ 411s] + umask 022 [ 411s] + cd /home/abuild/rpmbuild/BUILD [ 411s] + cd DBD-SQLite-1.50 [ 411s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 411s] + export LC_ALL=C [ 411s] + LC_ALL=C [ 411s] + export DOCDIR [ 411s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 411s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 411s] + cp -pr constants.inc /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 411s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 412s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 412s] + exit 0 [ 413s] Provides: perl(DBD::SQLite) = 1.50 perl(DBD::SQLite::Constants) perl(DBD::SQLite::VirtualTable) = 1.50 perl(DBD::SQLite::VirtualTable::Cursor) perl(DBD::SQLite::VirtualTable::FileContent) perl(DBD::SQLite::VirtualTable::FileContent::Cursor) perl(DBD::SQLite::VirtualTable::PerlData) perl(DBD::SQLite::VirtualTable::PerlData::Cursor) perl-DBD-SQLite = 1.50-3.1 perl-DBD-SQLite(armv7hl-32) = 1.50-3.1 [ 413s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 413s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 413s] Processing files: perl-DBD-SQLite-debugsource-1.50-3.1.armv7hl [ 413s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 413s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 413s] [ 413s] Provides: perl-DBD-SQLite-debugsource = 1.50-3.1 perl-DBD-SQLite-debugsource(armv7hl-32) = 1.50-3.1 [ 413s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 413s] Processing files: perl-DBD-SQLite-debuginfo-1.50-3.1.armv7hl [ 413s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 413s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 413s] [ 413s] Provides: perl-DBD-SQLite-debuginfo = 1.50-3.1 perl-DBD-SQLite-debuginfo(armv7hl-32) = 1.50-3.1 [ 413s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 413s] Recommends: perl-DBD-SQLite-debugsource(armv7hl-32) = 1.50-3.1 [ 413s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm [ 414s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-3.1.src.rpm [ 419s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-DBD-SQLite-1.50-3.1.armv7hl.rpm [ 424s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-DBD-SQLite-debugsource-1.50-3.1.armv7hl.rpm [ 427s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-DBD-SQLite-debuginfo-1.50-3.1.armv7hl.rpm [ 427s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.510bd7 [ 427s] + umask 022 [ 427s] + cd /home/abuild/rpmbuild/BUILD [ 427s] + cd DBD-SQLite-1.50 [ 427s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-3.1.arm [ 427s] + exit 0 [ 427s] ... checking for files with abuild user/group [ 428s] ... creating baselibs [ 429s] ... comparing built packages with the former built [ 429s] /usr/lib/build/pkg-diff.sh [ 429s] compare /.build.oldpackages/perl-DBD-SQLite-1.50-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-3.1.src.rpm [ 430s] This is not a prerelease project. Compare the project name. [ 430s] comparing disturl_distribution [ 430s] --- old-disturl_distribution [ 430s] +++ new-disturl_distribution [ 430s] @@ -1 +1 @@ [ 430s] -obs://127.0.0.1/Tizen-Base/standard/cbd7e9e6b3dcbe27fc7eadce4d3c4f4e-perl-DBD-SQLite Tizen-Base [ 430s] +obs://127.0.0.1/Tizen-Base/standard/4fb418fbb3d4945c6ef63c7af57f58a8-perl-DBD-SQLite Tizen-Base [ 430s] RPM meta information is different [ 430s] [ 430s] a29ebebe2ae3 finished "build perl-DBD-SQLite.spec" at Wed Jun 12 03:10:07 UTC 2024. [ 430s] Retried build at Wed Jul 3 04:12:54 2024 returned same result, skipped Retried build at Wed Jul 10 08:32:41 2024 returned same result, skipped Retried build at Wed Jul 24 01:06:03 2024 returned same result, skipped Retried build at Thu Jul 25 09:43:32 2024 returned same result, skipped