[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 86c5bb0bb39f started "build perl-HTML-Parser.spec" at Fri Dec 13 11:07:54 UTC 2024. [ 0s] [ 0s] Building perl-HTML-Parser for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 '288c2d75260093d6bc3959ff5026a7f2' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/perl-HTML-Parser.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/perl-HTML-Parser.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/24/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/perl-HTML-Parser.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/42] preinstalling libmagic-data... [ 2s] [2/42] preinstalling libncurses... [ 2s] [3/42] preinstalling setup... [ 2s] [4/42] preinstalling filesystem... [ 2s] [5/42] preinstalling glibc... [ 2s] [6/42] preinstalling libgcc... [ 2s] [7/42] preinstalling bash... [ 3s] [8/42] preinstalling diffutils... [ 3s] [9/42] preinstalling grep... [ 3s] [10/42] preinstalling libattr... [ 3s] [11/42] preinstalling libblkid... [ 3s] [12/42] preinstalling libbz2... [ 3s] [13/42] preinstalling libcap... [ 3s] [14/42] preinstalling libfreebl3... [ 3s] [15/42] preinstalling liblua... [ 3s] [16/42] preinstalling liblzma... [ 3s] [17/42] preinstalling libpopt... [ 3s] [18/42] preinstalling libreadline... [ 3s] [19/42] preinstalling libsmack... [ 3s] [20/42] preinstalling libsqlite... [ 3s] [21/42] preinstalling libuuid... [ 3s] [22/42] preinstalling libxcrypt... [ 3s] [23/42] preinstalling libzstd1... [ 3s] [24/42] preinstalling nspr... [ 3s] [25/42] preinstalling sed... [ 3s] [26/42] preinstalling zlib... [ 3s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 17s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 21s] [29/42] preinstalling coreutils... [ 22s] [30/42] preinstalling libacl... [ 22s] [31/42] preinstalling libelf... [ 22s] [32/42] preinstalling libmount... [ 22s] [33/42] preinstalling smack... [ 22s] [34/42] preinstalling bzip2... [ 22s] [35/42] preinstalling libmagic... [ 22s] [36/42] preinstalling libxml2... [ 22s] [37/42] preinstalling tar... [ 22s] [38/42] preinstalling util-linux... [ 22s] [39/42] preinstalling util-linux-su... [ 22s] [40/42] preinstalling nss... [ 23s] [41/42] preinstalling libsoftokn3... [ 23s] [42/42] preinstalling rpm... [ 23s] running qemu-linux-user-x86_64-cross postinstall script [ 24s] running qemu-accel-x86_64-armv7hl postinstall script [ 24s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.2.0/liblto_plugin.so': No such file or directory [ 24s] running setup postinstall script [ 24s] chroot: failed to run command '': No such file or directory [ 24s] initializing rpm db... [ 24s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 24s] breaking dependency libxcrypt-devel -> glibc-devel [ 24s] cycle: libsoftokn3 -> nss [ 24s] breaking dependency nss -> libsoftokn3 [ 24s] done [ 24s] querying package ids... [ 25s] [1/99] cumulate libmagic-data-5.45-1.3 [ 25s] [2/99] cumulate perl-HTML-Tagset-3.20-1.1 [ 25s] [3/99] cumulate setup-0.9-1.11 [ 25s] [4/99] cumulate filesystem-3.1-1.1 [ 25s] [5/99] cumulate glibc-2.39-1.6 [ 25s] [6/99] cumulate libatomic-14.2.0-1.6 [ 25s] [7/99] cumulate libgcc-14.2.0-1.6 [ 25s] [8/99] cumulate bash-3.2.57-1.1 [ 25s] [9/99] cumulate cpio-2.8-1.1 [ 25s] [10/99] cumulate diffutils-3.10-1.2 [ 25s] [11/99] cumulate findutils-4.3.8-1.3 [ 25s] [12/99] cumulate gdbm-1.8.3-1.6 [ 25s] [13/99] cumulate hostname-3.23-1.1 [ 25s] [14/99] cumulate libattr-2.5.1-1.3 [ 25s] [15/99] cumulate libblkid-2.39.3-1.3 [ 25s] [16/99] cumulate libbz2-1.0.8-1.4 [ 25s] [17/99] cumulate libcap-2.69-1.5 [ 25s] [18/99] cumulate libfreebl3-3.98-1.6 [ 25s] [19/99] cumulate libgfortran-14.2.0-1.6 [ 25s] [20/99] cumulate libgomp-14.2.0-1.6 [ 25s] [21/99] cumulate libitm-14.2.0-1.6 [ 25s] [22/99] cumulate libltdl-2.4.7-1.6 [ 25s] [23/99] cumulate liblua-5.1.5-1.3 [ 25s] [24/99] cumulate liblzma-5.4.5-1.6 [ 25s] [25/99] cumulate libopenssl3-3.0.13-1.6 [ 25s] [26/99] cumulate libpcre-8.45-1.3 [ 25s] [27/99] cumulate libpopt-1.16-1.3 [ 25s] [28/99] cumulate libsmack-1.3.1-1.3 [ 25s] [29/99] cumulate libsmartcols-2.39.3-1.3 [ 25s] [30/99] cumulate libsqlite-3.44.0-1.3 [ 25s] [31/99] cumulate libstdc++-14.2.0-1.6 [ 25s] [32/99] cumulate libuuid-2.39.3-1.3 [ 25s] [33/99] cumulate libxcrypt-4.4.36-1.6 [ 25s] [34/99] cumulate libzstd1-1.5.5-1.4 [ 25s] [35/99] cumulate m4-1.4.19-1.1 [ 25s] [36/99] cumulate net-tools-2.0_20121208git-1.3 [ 25s] [37/99] cumulate nspr-4.35-1.3 [ 25s] [38/99] cumulate patch-2.7.6-1.3 [ 25s] [39/99] cumulate pkg-config-0.29.2-1.5 [ 25s] [40/99] cumulate sed-4.1c-1.3 [ 25s] [41/99] cumulate update-alternatives-1.22.2-1.2 [ 25s] [42/99] cumulate which-2.17-1.1 [ 25s] [43/99] cumulate zlib-1.3-1.6 [ 25s] [44/99] cumulate build-compare-2023.06.18-1.1 [ 25s] [45/99] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 25s] [46/99] cumulate libstdc++-devel-14.2.0-1.6 [ 25s] [47/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 25s] [48/99] cumulate cpp-14.2.0-1.6 [ 25s] [49/99] cumulate gcc-c++-14.2.0-1.6 [ 25s] [50/99] cumulate binutils-libs-2.43-1.6 [ 25s] [51/99] cumulate coreutils-6.9-14.9 [ 25s] [52/99] cumulate gawk-3.1.5-1.1 [ 25s] [53/99] cumulate grep-2.5.2-1.3 [ 25s] [54/99] cumulate libacl-2.3.2-1.3 [ 25s] [55/99] cumulate libcc1-14.2.0-1.6 [ 25s] [56/99] cumulate libelf-0.189-1.6 [ 25s] [57/99] cumulate libmount-2.39.3-1.3 [ 25s] [58/99] cumulate libubsan-14.2.0-1.6 [ 25s] [59/99] cumulate make-4.4-1.3 [ 25s] [60/99] cumulate nss-certs-3.98-1.6 [ 25s] [61/99] cumulate smack-1.3.1-1.3 [ 25s] [62/99] cumulate bzip2-1.0.8-1.4 [ 25s] [63/99] cumulate libfdisk-2.39.3-1.3 [ 25s] [64/99] cumulate libmagic-5.45-1.3 [ 25s] [65/99] cumulate libxml2-2.12.5-1.5 [ 25s] [66/99] cumulate xz-5.4.5-1.6 [ 25s] [67/99] cumulate perl-5.38.0-1.5 [ 25s] [68/99] cumulate build-mkbaselibs-20120927-1.1 [ 25s] [69/99] cumulate linux-glibc-devel-6.6-1.6 [ 25s] [70/99] cumulate terminfo-base-full-6.4-1.6 [ 25s] [71/99] cumulate autoconf-2.71-1.6 [ 25s] [72/99] cumulate file-5.45-1.3 [ 25s] [73/99] cumulate glibc-locale-2.39-1.6 [ 25s] [74/99] cumulate tar-1.17-1.2 [ 25s] [75/99] cumulate binutils-2.43-1.6 [ 25s] [76/99] cumulate gzip-1.3.12-1.3 [ 25s] [77/99] cumulate pam-1.1.6-1.5 [ 25s] [78/99] cumulate tzdata-2023c-1.1 [ 25s] [79/99] cumulate libdw-0.189-1.6 [ 25s] [80/99] cumulate libarchive-3.7.2-1.5 [ 25s] [81/99] cumulate gcc-14.2.0-1.6 [ 25s] [82/99] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 25s] [83/99] cumulate automake-1.16.5-1.6 [ 25s] [84/99] cumulate libasm-0.189-1.6 [ 25s] [85/99] cumulate libncurses6-6.4-1.6 [ 25s] [86/99] cumulate build-20120927-1.1 [ 25s] [87/99] cumulate libncurses-6.4-1.6 [ 25s] [88/99] cumulate less-643-1.1 [ 25s] [89/99] cumulate libreadline-5.2-1.5 [ 25s] [90/99] cumulate libtool-2.4.7-1.6 [ 25s] [91/99] cumulate elfutils-0.189-1.6 [ 25s] [92/99] cumulate util-linux-2.39.3-1.3 [ 25s] [93/99] cumulate util-linux-su-2.39.3-1.3 [ 25s] [94/99] cumulate libxcrypt-devel-4.4.36-1.6 [ 25s] [95/99] cumulate nss-3.98-1.6 [ 25s] [96/99] cumulate glibc-devel-2.39-1.6 [ 25s] [97/99] cumulate libsoftokn3-3.98-1.6 [ 25s] [98/99] cumulate rpm-4.14.1.1-1.6 [ 25s] [99/99] cumulate rpm-build-4.14.1.1-1.6 [ 25s] now installing cumulated packages [ 25s] Preparing... ######################################## [ 25s] Updating / installing... [ 25s] setup-0.9-1.11 ######################################## [ 25s] filesystem-3.1-1.1 ######################################## [ 26s] libmagic-data-5.45-1.3 ######################################## [ 26s] perl-HTML-Tagset-3.20-1.1 ######################################## [ 26s] glibc-2.39-1.6 ######################################## [ 26s] libgcc-14.2.0-1.6 ######################################## [ 27s] bash-3.2.57-1.1 ######################################## [ 27s] zlib-1.3-1.6 ######################################## [ 27s] coreutils-6.9-14.9 ######################################## [ 27s] libstdc++-14.2.0-1.6 ######################################## [ 27s] libbz2-1.0.8-1.4 ######################################## [ 28s] liblzma-5.4.5-1.6 ######################################## [ 28s] libelf-0.189-1.6 ######################################## [ 28s] libdw-0.189-1.6 ######################################## [ 28s] libxcrypt-4.4.36-1.6 ######################################## [ 29s] libmagic-5.45-1.3 ######################################## [ 29s] libblkid-2.39.3-1.3 ######################################## [ 29s] nspr-4.35-1.3 ######################################## [ 29s] pam-1.1.6-1.5 ######################################## [ 30s] libcap-2.69-1.5 ######################################## [ 30s] libfreebl3-3.98-1.6 ######################################## [ 30s] liblua-5.1.5-1.3 ######################################## [ 30s] libpopt-1.16-1.3 ######################################## [ 31s] libuuid-2.39.3-1.3 ######################################## [ 31s] libzstd1-1.5.5-1.4 ######################################## [ 32s] linux-glibc-devel-6.6-1.6 ######################################## [ 32s] terminfo-base-full-6.4-1.6 ######################################## [ 32s] libncurses6-6.4-1.6 ######################################## [ 32s] libreadline-5.2-1.5 ######################################## [ 32s] libfdisk-2.39.3-1.3 ######################################## [ 33s] nss-certs-3.98-1.6 ######################################## [ 33s] libmount-2.39.3-1.3 ######################################## [ 33s] libasm-0.189-1.6 ######################################## [ 33s] libxml2-2.12.5-1.5 ######################################## [ 33s] xz-5.4.5-1.6 ######################################## [ 34s] bzip2-1.0.8-1.4 ######################################## [ 34s] libcc1-14.2.0-1.6 ######################################## [ 34s] libubsan-14.2.0-1.6 ######################################## [ 34s] gzip-1.3.12-1.3 ######################################## [ 34s] binutils-libs-2.43-1.6 ######################################## [ 35s] binutils-2.43-1.6 ######################################## [ 35s] make-4.4-1.3 ######################################## [ 35s] findutils-4.3.8-1.3 ######################################## [ 35s] gdbm-1.8.3-1.6 ######################################## [ 38s] perl-5.38.0-1.5 ######################################## [ 38s] build-mkbaselibs-20120927-1.1 ######################################## [ 38s] libattr-2.5.1-1.3 ######################################## [ 38s] libacl-2.3.2-1.3 ######################################## [ 38s] tar-1.17-1.2 ######################################## [ 38s] libgfortran-14.2.0-1.6 ######################################## [ 38s] libgomp-14.2.0-1.6 ######################################## [ 39s] libitm-14.2.0-1.6 ######################################## [ 39s] libltdl-2.4.7-1.6 ######################################## [ 40s] libopenssl3-3.0.13-1.6 ######################################## [ 40s] libarchive-3.7.2-1.5 ######################################## [ 40s] libpcre-8.45-1.3 ######################################## [ 40s] libsmack-1.3.1-1.3 ######################################## [ 40s] libsmartcols-2.39.3-1.3 ######################################## [ 41s] libsqlite-3.44.0-1.3 ######################################## [ 41s] libsoftokn3-3.98-1.6 ######################################## [ 42s] nss-3.98-1.6 ######################################## [ 42s] rpm-4.14.1.1-1.6 ######################################## [ 43s] m4-1.4.19-1.1 ######################################## [ 43s] autoconf-2.71-1.6 ######################################## [ 43s] automake-1.16.5-1.6 ######################################## [ 43s] patch-2.7.6-1.3 ######################################## [ 43s] pkg-config-0.29.2-1.5 ######################################## [ 43s] sed-4.1c-1.3 ######################################## [ 44s] util-linux-2.39.3-1.3 ######################################## [ 44s] libatomic-14.2.0-1.6 ######################################## [ 44s] libtool-2.4.7-1.6 ######################################## [ 44s] build-20120927-1.1 ######################################## [ 44s] libncurses-6.4-1.6 ######################################## [ 45s] libstdc++-devel-14.2.0-1.6 ######################################## [ 45s] build-compare-2023.06.18-1.1 ######################################## [ 45s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 48s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 52s] gcc-14.2.0-1.6 ######################################## [ 52s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 52s] glibc-devel-2.39-1.6 ######################################## [ 68s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 69s] rpm-build-4.14.1.1-1.6 ######################################## [ 69s] util-linux-su-2.39.3-1.3 ######################################## [ 69s] smack-1.3.1-1.3 ######################################## [ 69s] grep-2.5.2-1.3 ######################################## [ 69s] elfutils-0.189-1.6 ######################################## [ 69s] less-643-1.1 ######################################## [ 69s] file-5.45-1.3 ######################################## [ 70s] glibc-locale-2.39-1.6 ######################################## [ 70s] tzdata-2023c-1.1 ######################################## [ 72s] cpp-14.2.0-1.6 ######################################## [ 73s] gcc-c++-14.2.0-1.6 ######################################## [ 73s] gawk-3.1.5-1.1 ######################################## [ 73s] cpio-2.8-1.1 ######################################## [ 73s] diffutils-3.10-1.2 ######################################## [ 73s] hostname-3.23-1.1 ######################################## [ 73s] net-tools-2.0_20121208git-1.3 ######################################## [ 73s] update-alternatives-1.22.2-1.2 ######################################## [ 73s] which-2.17-1.1 ######################################## [ 75s] now finalizing build dir... [ 76s] ----------------------------------------------------------------- [ 76s] I have the following modifications for perl-HTML-Parser.spec: [ 76s] 4c4 [ 76s] < Release: 0 [ 76s] --- [ 76s] > Release: 1.1 [ 77s] build target is armv7hl-tizen-linux [ 77s] ----------------------------------------------------------------- [ 77s] ----- building perl-HTML-Parser.spec (user abuild) [ 77s] ----------------------------------------------------------------- [ 77s] ----------------------------------------------------------------- [ 78s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/288c2d75260093d6bc3959ff5026a7f2-perl-HTML-Parser' /home/abuild/rpmbuild/SOURCES/perl-HTML-Parser.spec [ 82s] Building target platforms: armv7hl-tizen-linux [ 82s] Building for target armv7hl-tizen-linux [ 82s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.mS5N4I [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + rm -rf HTML-Parser-3.81 [ 82s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/HTML-Parser-3.81.tar.gz [ 82s] + /bin/tar -xof - [ 82s] + STATUS=0 [ 82s] + '[' 0 -ne 0 ']' [ 82s] + cd HTML-Parser-3.81 [ 82s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 82s] + cp /home/abuild/rpmbuild/SOURCES/perl-HTML-Parser.manifest . [ 82s] + exit 0 [ 82s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.hVGmi1 [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd HTML-Parser-3.81 [ 83s] + ref=/usr/lib/rpm [ 83s] + mints=0 [ 83s] + case $(uname -m) in [ 83s] ++ uname -m [ 83s] + for s in guess sub [ 83s] ++ find -maxdepth 8 -name config.guess [ 83s] + for s in guess sub [ 83s] ++ find -maxdepth 8 -name config.sub [ 83s] + LANG=C [ 83s] + export LANG [ 83s] + unset DISPLAY [ 83s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 83s] + export CFLAGS [ 83s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 83s] + export CXXFLAGS [ 83s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 83s] + export FFLAGS [ 83s] + LDFLAGS= [ 83s] + export LDFLAGS [ 83s] + perl Makefile.PL INSTALLDIRS=vendor [ 84s] Warning: prerequisite HTTP::Headers 0 not found. [ 84s] Warning: prerequisite URI 0 not found. [ 84s] Warning: prerequisite URI::URL 0 not found. [ 84s] Checking if your kit is complete... [ 84s] Looks good [ 85s] Generating a Unix-style Makefile [ 85s] Writing Makefile for HTML::Parser [ 85s] Writing MYMETA.yml and MYMETA.json [ 85s] + make -j12 [ 85s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/HTML-Parser-3.81/typemap' Parser.xs > Parser.xsc [ 85s] Running Mkbootstrap for Parser () [ 86s] chmod 644 "Parser.bs" [ 86s] cp lib/HTML/Filter.pm blib/lib/HTML/Filter.pm [ 86s] cp lib/HTML/PullParser.pm blib/lib/HTML/PullParser.pm [ 86s] cp lib/HTML/TokeParser.pm blib/lib/HTML/TokeParser.pm [ 86s] cp lib/HTML/Parser.pm blib/lib/HTML/Parser.pm [ 86s] cp lib/HTML/HeadParser.pm blib/lib/HTML/HeadParser.pm [ 86s] cp lib/HTML/Entities.pm blib/lib/HTML/Entities.pm [ 86s] cp lib/HTML/LinkExtor.pm blib/lib/HTML/LinkExtor.pm [ 86s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Parser.bs blib/arch/auto/HTML/Parser/Parser.bs 644 [ 86s] mv Parser.xsc Parser.c [ 86s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -DVERSION=\"3.81\" -DXS_VERSION=\"3.81\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" -DMARKED_SECTION Parser.c [ 86s] In file included from Parser.xs:11: [ 86s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 86s] 1059 | #define PERL_USE_SAFE_PUTENV [ 86s] | ^~~~~~~~~~~~~~~~~~~~ [ 86s] : note: this is the location of the previous definition [ 89s] rm -f blib/arch/auto/HTML/Parser/Parser.so [ 89s] cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -L/usr/local/lib Parser.o -o blib/arch/auto/HTML/Parser/Parser.so \ [ 89s] \ [ 89s] [ 89s] chmod 755 blib/arch/auto/HTML/Parser/Parser.so [ 91s] Manifying 7 pod documents [ 91s] + exit 0 [ 91s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.y6BUyR [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd HTML-Parser-3.81 [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm [ 92s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm install_vendor [ 92s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Parser.bs blib/arch/auto/HTML/Parser/Parser.bs 644 [ 93s] Manifying 7 pod documents [ 94s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/HeadParser.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/PullParser.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/Parser.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/Entities.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/TokeParser.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/Filter.pm [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::Parser.3 [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::TokeParser.3 [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::PullParser.3 [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::HeadParser.3 [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::Filter.3 [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::LinkExtor.3 [ 94s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man/man3/HTML::Entities.3 [ 94s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 95s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 95s] + xargs -0 -r rm [ 95s] + '[' armv7hl == noarch ']' [ 95s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/info [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/doc/packages [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/doc/perl-HTML-Parser [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/doc/perl-HTML-Parser-3.81 [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/gtk-doc [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/doc [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 95s] + xargs rm -f -- [ 95s] + xargs rm -f -- [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 95s] + xargs rm -f -- [ 95s] + FILES=perl-HTML-Parser.files [ 95s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 95s] + RES= [ 95s] + '[' -n '' ']' [ 95s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ [ 95s] ++ sort [ 95s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d [ 95s] + for dir in '`find ${base_dir} -type d | sort`' [ 95s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 95s] + continue [ 95s] + for dir in '`find ${base_dir} -type d | sort`' [ 95s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 95s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 95s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 95s] + el=armv7l-linux-thread-multi [ 95s] + all_dir=(${all_dir[@]} $el) [ 95s] + for dir in '`find ${base_dir} -type d | sort`' [ 95s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 95s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 95s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML [ 95s] + el=armv7l-linux-thread-multi/HTML [ 95s] + all_dir=(${all_dir[@]} $el) [ 95s] + for dir in '`find ${base_dir} -type d | sort`' [ 95s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 96s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 96s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 96s] + el=armv7l-linux-thread-multi/auto [ 96s] + all_dir=(${all_dir[@]} $el) [ 96s] + for dir in '`find ${base_dir} -type d | sort`' [ 96s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 96s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 96s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML [ 96s] + el=armv7l-linux-thread-multi/auto/HTML [ 96s] + all_dir=(${all_dir[@]} $el) [ 96s] + for dir in '`find ${base_dir} -type d | sort`' [ 96s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 96s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 96s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser [ 96s] + el=armv7l-linux-thread-multi/auto/HTML/Parser [ 96s] + all_dir=(${all_dir[@]} $el) [ 96s] + for i in '${all_dir[@]}' [ 96s] + '[' armv7l-linux-thread-multi = auto ']' [ 96s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 96s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']' [ 96s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 96s] + RES= [ 96s] + '[' -n '' ']' [ 96s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 96s] + /bin/cat [ 96s] + for i in '${all_dir[@]}' [ 96s] + '[' armv7l-linux-thread-multi/HTML = auto ']' [ 96s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 96s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML ']' [ 96s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML -maxdepth 1 -type f [ 96s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/HeadParser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/PullParser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Parser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Entities.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/TokeParser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Filter.pm' [ 96s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/HeadParser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/PullParser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Parser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Entities.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/TokeParser.pm [ 96s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Filter.pm' ']' [ 96s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/HeadParser.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/HeadParser.pm [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/PullParser.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/PullParser.pm [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Parser.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/Parser.pm [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Entities.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/Entities.pm [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/TokeParser.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/TokeParser.pm [ 96s] + /bin/cat [ 96s] + for file in '$RES' [ 96s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/HTML/Filter.pm [ 96s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/HTML/Filter.pm [ 96s] + /bin/cat [ 97s] + for i in '${all_dir[@]}' [ 97s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 97s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 97s] + continue [ 97s] + for i in '${all_dir[@]}' [ 97s] + '[' armv7l-linux-thread-multi/auto/HTML = auto ']' [ 97s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 97s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML ']' [ 97s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML -maxdepth 1 -type f [ 97s] + RES= [ 97s] + '[' -n '' ']' [ 97s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML [ 97s] + /bin/cat [ 97s] + for i in '${all_dir[@]}' [ 97s] + '[' armv7l-linux-thread-multi/auto/HTML/Parser = auto ']' [ 97s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 97s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML/Parser ']' [ 97s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML/Parser -maxdepth 1 -type f [ 97s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 97s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so ']' [ 97s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser [ 97s] + /bin/cat [ 97s] + for file in '$RES' [ 97s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 97s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 97s] + /bin/cat [ 97s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/man ']' [ 97s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/var/adm/perl-modules/perl-HTML-Parser ']' [ 97s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/bin ']' [ 97s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.81-1.1 --unique-debug-src-base perl-HTML-Parser-3.81-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/HTML-Parser-3.81 [ 98s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 98s] 183 blocks [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/HTML-Parser-3.81/perl-HTML-Parser-debuginfo.manifest [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/HTML-Parser-3.81/perl-HTML-Parser-debugsource.manifest [ 99s] + /usr/lib/rpm/check-buildroot [ 99s] + /usr/lib/rpm//brp-compress [ 99s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 100s] + /usr/lib/rpm/brp-python-hardlink [ 100s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm [ 100s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/HTML-Parser-3.81/isu.list [ 100s] ~/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm ~/rpmbuild/BUILD/HTML-Parser-3.81 [ 100s] ~/rpmbuild/BUILD/HTML-Parser-3.81 [ 100s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 116s] Processing files: perl-HTML-Parser-3.81-1.1.armv7hl [ 116s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 116s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 116s] [ 116s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.YYPa7e [ 116s] + umask 022 [ 116s] + cd /home/abuild/rpmbuild/BUILD [ 116s] + cd HTML-Parser-3.81 [ 116s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/licenses/perl-HTML-Parser [ 116s] + export LC_ALL=C [ 116s] + LC_ALL=C [ 116s] + export LICENSEDIR [ 116s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/licenses/perl-HTML-Parser [ 116s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm/usr/share/licenses/perl-HTML-Parser [ 116s] + exit 0 [ 117s] Provides: perl(HTML::Entities) = 3.81 perl(HTML::Filter) = 3.81 perl(HTML::HeadParser) = 3.81 perl(HTML::LinkExtor) = 3.81 perl(HTML::Parser) = 3.81 perl(HTML::PullParser) = 3.81 perl(HTML::TokeParser) = 3.81 perl-HTML-Parser = 3.81-1.1 perl-HTML-Parser(armv7hl-32) = 3.81-1.1 [ 117s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 117s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 117s] Processing files: perl-HTML-Parser-debugsource-3.81-1.1.armv7hl [ 117s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 117s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 117s] [ 117s] Provides: perl-HTML-Parser-debugsource = 3.81-1.1 perl-HTML-Parser-debugsource(armv7hl-32) = 3.81-1.1 [ 117s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 117s] Processing files: perl-HTML-Parser-debuginfo-3.81-1.1.armv7hl [ 117s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 117s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 117s] [ 117s] Provides: perl-HTML-Parser-debuginfo = 3.81-1.1 perl-HTML-Parser-debuginfo(armv7hl-32) = 3.81-1.1 [ 117s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 117s] Recommends: perl-HTML-Parser-debugsource(armv7hl-32) = 3.81-1.1 [ 117s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm [ 118s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-HTML-Parser-3.81-1.1.src.rpm [ 118s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-HTML-Parser-3.81-1.1.armv7hl.rpm [ 118s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-HTML-Parser-debugsource-3.81-1.1.armv7hl.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-HTML-Parser-debuginfo-3.81-1.1.armv7hl.rpm [ 119s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ep3I1C [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd HTML-Parser-3.81 [ 119s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.81-1.1.arm [ 119s] + exit 0 [ 119s] ... checking for files with abuild user/group [ 119s] ... creating baselibs [ 121s] [ 121s] 86c5bb0bb39f finished "build perl-HTML-Parser.spec" at Fri Dec 13 11:09:55 UTC 2024. [ 121s]