[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 1s] [ 1s] 86c5bb0bb39f started "build perl-PerlIO-gzip.spec" at Fri Dec 13 11:05:21 UTC 2024. [ 1s] [ 1s] Building perl-PerlIO-gzip for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/perl-PerlIO-gzip.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/perl-PerlIO-gzip.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/42] preinstalling libmagic-data... [ 3s] [2/42] preinstalling libncurses... [ 3s] [3/42] preinstalling setup... [ 4s] [4/42] preinstalling filesystem... [ 4s] [5/42] preinstalling glibc... [ 4s] [6/42] preinstalling libgcc... [ 4s] [7/42] preinstalling bash... [ 4s] [8/42] preinstalling diffutils... [ 4s] [9/42] preinstalling grep... [ 4s] [10/42] preinstalling libattr... [ 4s] [11/42] preinstalling libblkid... [ 5s] [12/42] preinstalling libbz2... [ 5s] [13/42] preinstalling libcap... [ 5s] [14/42] preinstalling libfreebl3... [ 5s] [15/42] preinstalling liblua... [ 5s] [16/42] preinstalling liblzma... [ 5s] [17/42] preinstalling libpopt... [ 5s] [18/42] preinstalling libreadline... [ 5s] [19/42] preinstalling libsmack... [ 5s] [20/42] preinstalling libsqlite... [ 6s] [21/42] preinstalling libuuid... [ 6s] [22/42] preinstalling libxcrypt... [ 6s] [23/42] preinstalling libzstd1... [ 6s] [24/42] preinstalling nspr... [ 6s] [25/42] preinstalling sed... [ 6s] [26/42] preinstalling zlib... [ 6s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 20s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 26s] [29/42] preinstalling coreutils... [ 26s] [30/42] preinstalling libacl... [ 26s] [31/42] preinstalling libelf... [ 26s] [32/42] preinstalling libmount... [ 27s] [33/42] preinstalling smack... [ 27s] [34/42] preinstalling bzip2... [ 27s] [35/42] preinstalling libmagic... [ 27s] [36/42] preinstalling libxml2... [ 28s] [37/42] preinstalling tar... [ 28s] [38/42] preinstalling util-linux... [ 28s] [39/42] preinstalling util-linux-su... [ 29s] [40/42] preinstalling nss... [ 29s] [41/42] preinstalling libsoftokn3... [ 29s] [42/42] preinstalling rpm... [ 30s] running qemu-linux-user-x86_64-cross postinstall script [ 32s] running qemu-accel-x86_64-armv7hl postinstall script [ 32s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.2.0/liblto_plugin.so': No such file or directory [ 32s] running setup postinstall script [ 32s] chroot: failed to run command '': No such file or directory [ 32s] initializing rpm db... [ 32s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 32s] breaking dependency libxcrypt-devel -> glibc-devel [ 32s] cycle: libsoftokn3 -> nss [ 32s] breaking dependency nss -> libsoftokn3 [ 32s] done [ 32s] querying package ids... [ 36s] [1/99] cumulate libmagic-data-5.45-1.3 [ 36s] [2/99] cumulate setup-0.9-1.11 [ 36s] [3/99] cumulate filesystem-3.1-1.1 [ 36s] [4/99] cumulate glibc-2.39-1.6 [ 36s] [5/99] cumulate libatomic-14.2.0-1.6 [ 36s] [6/99] cumulate libgcc-14.2.0-1.6 [ 36s] [7/99] cumulate bash-3.2.57-1.1 [ 36s] [8/99] cumulate cpio-2.8-1.1 [ 36s] [9/99] cumulate diffutils-3.10-1.2 [ 36s] [10/99] cumulate findutils-4.3.8-1.3 [ 36s] [11/99] cumulate gdbm-1.8.3-1.6 [ 36s] [12/99] cumulate hostname-3.23-1.3 [ 36s] [13/99] cumulate libattr-2.5.1-1.3 [ 36s] [14/99] cumulate libblkid-2.39.3-1.3 [ 36s] [15/99] cumulate libbz2-1.0.8-1.4 [ 36s] [16/99] cumulate libcap-2.69-1.5 [ 36s] [17/99] cumulate libfreebl3-3.98-1.6 [ 36s] [18/99] cumulate libgfortran-14.2.0-1.6 [ 36s] [19/99] cumulate libgomp-14.2.0-1.6 [ 36s] [20/99] cumulate libitm-14.2.0-1.6 [ 36s] [21/99] cumulate libltdl-2.4.7-1.6 [ 36s] [22/99] cumulate liblua-5.1.5-1.3 [ 36s] [23/99] cumulate liblzma-5.4.5-1.6 [ 36s] [24/99] cumulate libopenssl3-3.0.13-1.6 [ 36s] [25/99] cumulate libpcre-8.45-1.3 [ 36s] [26/99] cumulate libpopt-1.16-1.3 [ 36s] [27/99] cumulate libsmack-1.3.1-1.3 [ 36s] [28/99] cumulate libsmartcols-2.39.3-1.3 [ 36s] [29/99] cumulate libsqlite-3.44.0-1.3 [ 36s] [30/99] cumulate libstdc++-14.2.0-1.6 [ 36s] [31/99] cumulate libuuid-2.39.3-1.3 [ 36s] [32/99] cumulate libxcrypt-4.4.36-1.6 [ 36s] [33/99] cumulate libzstd1-1.5.5-1.4 [ 36s] [34/99] cumulate m4-1.4.19-1.1 [ 36s] [35/99] cumulate net-tools-2.0_20121208git-1.3 [ 36s] [36/99] cumulate nspr-4.35-1.3 [ 36s] [37/99] cumulate patch-2.7.6-1.3 [ 36s] [38/99] cumulate pkg-config-0.29.2-1.5 [ 36s] [39/99] cumulate sed-4.1c-1.3 [ 36s] [40/99] cumulate update-alternatives-1.22.2-1.2 [ 36s] [41/99] cumulate which-2.17-1.3 [ 36s] [42/99] cumulate zlib-1.3-1.6 [ 36s] [43/99] cumulate build-compare-2023.06.18-1.1 [ 36s] [44/99] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 36s] [45/99] cumulate libstdc++-devel-14.2.0-1.6 [ 36s] [46/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 36s] [47/99] cumulate cpp-14.2.0-1.6 [ 36s] [48/99] cumulate gcc-c++-14.2.0-1.6 [ 36s] [49/99] cumulate binutils-libs-2.43-1.6 [ 36s] [50/99] cumulate coreutils-6.9-14.9 [ 36s] [51/99] cumulate gawk-3.1.5-1.2 [ 36s] [52/99] cumulate grep-2.5.2-1.3 [ 36s] [53/99] cumulate libacl-2.3.2-1.3 [ 36s] [54/99] cumulate libcc1-14.2.0-1.6 [ 36s] [55/99] cumulate libelf-0.189-1.6 [ 36s] [56/99] cumulate libmount-2.39.3-1.3 [ 36s] [57/99] cumulate libubsan-14.2.0-1.6 [ 36s] [58/99] cumulate make-4.4-1.3 [ 36s] [59/99] cumulate nss-certs-3.98-1.6 [ 36s] [60/99] cumulate smack-1.3.1-1.3 [ 36s] [61/99] cumulate bzip2-1.0.8-1.4 [ 36s] [62/99] cumulate libfdisk-2.39.3-1.3 [ 36s] [63/99] cumulate libmagic-5.45-1.3 [ 36s] [64/99] cumulate libxml2-2.12.5-1.5 [ 36s] [65/99] cumulate xz-5.4.5-1.6 [ 36s] [66/99] cumulate perl-5.38.0-1.5 [ 36s] [67/99] cumulate build-mkbaselibs-20120927-1.1 [ 36s] [68/99] cumulate linux-glibc-devel-6.6-1.6 [ 36s] [69/99] cumulate terminfo-base-full-6.4-1.6 [ 36s] [70/99] cumulate autoconf-2.71-1.6 [ 36s] [71/99] cumulate file-5.45-1.3 [ 36s] [72/99] cumulate glibc-locale-2.39-1.6 [ 36s] [73/99] cumulate tar-1.17-1.2 [ 36s] [74/99] cumulate binutils-2.43-1.6 [ 36s] [75/99] cumulate gzip-1.3.12-1.3 [ 36s] [76/99] cumulate pam-1.1.6-1.5 [ 36s] [77/99] cumulate tzdata-2023c-1.2 [ 36s] [78/99] cumulate libdw-0.189-1.6 [ 36s] [79/99] cumulate libarchive-3.7.2-1.5 [ 36s] [80/99] cumulate gcc-14.2.0-1.6 [ 36s] [81/99] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 36s] [82/99] cumulate automake-1.16.5-1.6 [ 36s] [83/99] cumulate libasm-0.189-1.6 [ 36s] [84/99] cumulate libncurses6-6.4-1.6 [ 36s] [85/99] cumulate build-20120927-1.1 [ 36s] [86/99] cumulate libncurses-6.4-1.6 [ 36s] [87/99] cumulate less-643-1.1 [ 36s] [88/99] cumulate libreadline-5.2-1.5 [ 36s] [89/99] cumulate libtool-2.4.7-1.6 [ 36s] [90/99] cumulate elfutils-0.189-1.6 [ 36s] [91/99] cumulate util-linux-2.39.3-1.3 [ 36s] [92/99] cumulate util-linux-su-2.39.3-1.3 [ 36s] [93/99] cumulate libxcrypt-devel-4.4.36-1.6 [ 36s] [94/99] cumulate nss-3.98-1.6 [ 36s] [95/99] cumulate glibc-devel-2.39-1.6 [ 36s] [96/99] cumulate libsoftokn3-3.98-1.6 [ 36s] [97/99] cumulate rpm-4.14.1.1-1.6 [ 36s] [98/99] cumulate zlib-devel-1.3-1.6 [ 36s] [99/99] cumulate rpm-build-4.14.1.1-1.6 [ 36s] now installing cumulated packages [ 39s] Preparing... ######################################## [ 39s] Updating / installing... [ 39s] setup-0.9-1.11 ######################################## [ 39s] filesystem-3.1-1.1 ######################################## [ 39s] libmagic-data-5.45-1.3 ######################################## [ 40s] glibc-2.39-1.6 ######################################## [ 40s] libgcc-14.2.0-1.6 ######################################## [ 41s] bash-3.2.57-1.1 ######################################## [ 41s] zlib-1.3-1.6 ######################################## [ 42s] coreutils-6.9-14.9 ######################################## [ 42s] libstdc++-14.2.0-1.6 ######################################## [ 42s] libbz2-1.0.8-1.4 ######################################## [ 43s] liblzma-5.4.5-1.6 ######################################## [ 43s] libelf-0.189-1.6 ######################################## [ 43s] libdw-0.189-1.6 ######################################## [ 44s] libxcrypt-4.4.36-1.6 ######################################## [ 44s] libmagic-5.45-1.3 ######################################## [ 44s] libblkid-2.39.3-1.3 ######################################## [ 45s] nspr-4.35-1.3 ######################################## [ 45s] pam-1.1.6-1.5 ######################################## [ 46s] libcap-2.69-1.5 ######################################## [ 46s] libfreebl3-3.98-1.6 ######################################## [ 47s] liblua-5.1.5-1.3 ######################################## [ 47s] libpopt-1.16-1.3 ######################################## [ 47s] libuuid-2.39.3-1.3 ######################################## [ 47s] libzstd1-1.5.5-1.4 ######################################## [ 48s] pkg-config-0.29.2-1.5 ######################################## [ 48s] linux-glibc-devel-6.6-1.6 ######################################## [ 48s] terminfo-base-full-6.4-1.6 ######################################## [ 48s] libncurses6-6.4-1.6 ######################################## [ 49s] libreadline-5.2-1.5 ######################################## [ 49s] libfdisk-2.39.3-1.3 ######################################## [ 49s] nss-certs-3.98-1.6 ######################################## [ 49s] libmount-2.39.3-1.3 ######################################## [ 49s] libasm-0.189-1.6 ######################################## [ 49s] libxml2-2.12.5-1.5 ######################################## [ 50s] xz-5.4.5-1.6 ######################################## [ 50s] bzip2-1.0.8-1.4 ######################################## [ 50s] libcc1-14.2.0-1.6 ######################################## [ 50s] libubsan-14.2.0-1.6 ######################################## [ 50s] gzip-1.3.12-1.3 ######################################## [ 50s] binutils-libs-2.43-1.6 ######################################## [ 51s] binutils-2.43-1.6 ######################################## [ 52s] make-4.4-1.3 ######################################## [ 52s] findutils-4.3.8-1.3 ######################################## [ 52s] gdbm-1.8.3-1.6 ######################################## [ 56s] perl-5.38.0-1.5 ######################################## [ 56s] build-mkbaselibs-20120927-1.1 ######################################## [ 56s] libattr-2.5.1-1.3 ######################################## [ 56s] libacl-2.3.2-1.3 ######################################## [ 57s] tar-1.17-1.2 ######################################## [ 57s] libgfortran-14.2.0-1.6 ######################################## [ 57s] libgomp-14.2.0-1.6 ######################################## [ 57s] libitm-14.2.0-1.6 ######################################## [ 57s] libltdl-2.4.7-1.6 ######################################## [ 58s] libopenssl3-3.0.13-1.6 ######################################## [ 58s] libarchive-3.7.2-1.5 ######################################## [ 58s] libpcre-8.45-1.3 ######################################## [ 58s] libsmack-1.3.1-1.3 ######################################## [ 59s] libsmartcols-2.39.3-1.3 ######################################## [ 59s] libsqlite-3.44.0-1.3 ######################################## [ 59s] libsoftokn3-3.98-1.6 ######################################## [ 59s] nss-3.98-1.6 ######################################## [ 60s] rpm-4.14.1.1-1.6 ######################################## [ 61s] m4-1.4.19-1.1 ######################################## [ 61s] autoconf-2.71-1.6 ######################################## [ 61s] automake-1.16.5-1.6 ######################################## [ 61s] patch-2.7.6-1.3 ######################################## [ 61s] sed-4.1c-1.3 ######################################## [ 62s] util-linux-2.39.3-1.3 ######################################## [ 62s] libatomic-14.2.0-1.6 ######################################## [ 63s] libtool-2.4.7-1.6 ######################################## [ 63s] build-20120927-1.1 ######################################## [ 63s] libncurses-6.4-1.6 ######################################## [ 64s] libstdc++-devel-14.2.0-1.6 ######################################## [ 64s] build-compare-2023.06.18-1.1 ######################################## [ 64s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 74s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 80s] gcc-14.2.0-1.6 ######################################## [ 80s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 80s] glibc-devel-2.39-1.6 ######################################## [ 80s] zlib-devel-1.3-1.6 ######################################## [ 96s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 96s] rpm-build-4.14.1.1-1.6 ######################################## [ 96s] util-linux-su-2.39.3-1.3 ######################################## [ 96s] smack-1.3.1-1.3 ######################################## [ 96s] grep-2.5.2-1.3 ######################################## [ 96s] elfutils-0.189-1.6 ######################################## [ 96s] less-643-1.1 ######################################## [ 96s] file-5.45-1.3 ######################################## [ 97s] glibc-locale-2.39-1.6 ######################################## [ 97s] tzdata-2023c-1.2 ######################################## [ 99s] cpp-14.2.0-1.6 ######################################## [ 100s] gcc-c++-14.2.0-1.6 ######################################## [ 100s] gawk-3.1.5-1.2 ######################################## [ 100s] cpio-2.8-1.1 ######################################## [ 100s] diffutils-3.10-1.2 ######################################## [ 100s] hostname-3.23-1.3 ######################################## [ 100s] net-tools-2.0_20121208git-1.3 ######################################## [ 100s] update-alternatives-1.22.2-1.2 ######################################## [ 100s] which-2.17-1.3 ######################################## [ 100s] now finalizing build dir... [ 101s] ----------------------------------------------------------------- [ 101s] I have the following modifications for perl-PerlIO-gzip.spec: [ 101s] 4c4 [ 101s] < Release: 1 [ 101s] --- [ 101s] > Release: 1.1 [ 102s] build target is armv7hl-tizen-linux [ 102s] ----------------------------------------------------------------- [ 102s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 102s] ----------------------------------------------------------------- [ 102s] ----------------------------------------------------------------- [ 102s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 105s] Building target platforms: armv7hl-tizen-linux [ 105s] Building for target armv7hl-tizen-linux [ 105s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.sD1RKB [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + rm -rf perl-PerlIO-gzip-0.20 [ 105s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 105s] + /bin/tar -xof - [ 105s] + STATUS=0 [ 105s] + '[' 0 -ne 0 ']' [ 105s] + cd perl-PerlIO-gzip-0.20 [ 105s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 105s] + exit 0 [ 105s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zhVjBM [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd perl-PerlIO-gzip-0.20 [ 105s] + ref=/usr/lib/rpm [ 105s] + mints=0 [ 105s] + case $(uname -m) in [ 105s] ++ uname -m [ 105s] + for s in guess sub [ 105s] ++ find -maxdepth 8 -name config.guess [ 105s] + for s in guess sub [ 105s] ++ find -maxdepth 8 -name config.sub [ 105s] + LANG=C [ 105s] + export LANG [ 105s] + unset DISPLAY [ 105s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 105s] + export CFLAGS [ 105s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 105s] + export CXXFLAGS [ 105s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 105s] + export FFLAGS [ 105s] + LDFLAGS= [ 105s] + export LDFLAGS [ 105s] + perl Makefile.PL [ 106s] Checking if your kit is complete... [ 106s] Looks good [ 107s] Generating a Unix-style Makefile [ 107s] Writing Makefile for PerlIO::gzip [ 107s] Writing MYMETA.yml and MYMETA.json [ 107s] + make [ 110s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 111s] Running Mkbootstrap for gzip () [ 111s] chmod 644 "gzip.bs" [ 111s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 111s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 112s] mv gzip.xsc gzip.c [ 112s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" gzip.c [ 112s] In file included from gzip.xs:13: [ 112s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 112s] 1059 | #define PERL_USE_SAFE_PUTENV [ 112s] | ^~~~~~~~~~~~~~~~~~~~ [ 112s] : note: this is the location of the previous definition [ 112s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6227: [ 112s] gzip.xs: In function 'PerlIOGzip_getarg': [ 112s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized [-Wmaybe-uninitialized] [ 112s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 112s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 112s] gzip.xs:697:8: note: in expansion of macro 'newSVpv' [ 112s] 697 | sv = newSVpv (mode, 4); [ 112s] | ^~~~~~~ [ 112s] gzip.xs:675:24: note: 'mode' was declared here [ 112s] 675 | register const char *mode; [ 112s] | ^~~~ [ 113s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 113s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 113s] -lz \ [ 113s] [ 113s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 114s] Manifying 1 pod document [ 114s] + exit 0 [ 114s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.s93aWR [ 114s] + umask 022 [ 114s] + cd /home/abuild/rpmbuild/BUILD [ 114s] + cd perl-PerlIO-gzip-0.20 [ 114s] + LANG=C [ 114s] + export LANG [ 114s] + unset DISPLAY [ 114s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 114s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 114s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 114s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm install_vendor [ 114s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 115s] Manifying 1 pod document [ 115s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 115s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 115s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 115s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man/man3/PerlIO::gzip.3 [ 115s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/info [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/packages [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/perl-PerlIO-gzip [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/perl-PerlIO-gzip-0.20 [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/gtk-doc [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man [ 116s] + xargs rm -f -- [ 116s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 116s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 116s] + xargs rm -f -- [ 116s] + xargs rm -f -- [ 116s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 116s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 116s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 116s] + xargs -0 -r rm [ 116s] + '[' armv7hl == noarch ']' [ 116s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 116s] + FILES=perl-PerlIO-gzip.files [ 116s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 116s] + RES= [ 116s] + '[' -n '' ']' [ 116s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ [ 116s] ++ sort [ 116s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d [ 116s] + for dir in '`find ${base_dir} -type d | sort`' [ 116s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 116s] + continue [ 116s] + for dir in '`find ${base_dir} -type d | sort`' [ 116s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 116s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 116s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 116s] + el=armv7l-linux-thread-multi [ 116s] + all_dir=(${all_dir[@]} $el) [ 116s] + for dir in '`find ${base_dir} -type d | sort`' [ 116s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 116s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 116s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 116s] + el=armv7l-linux-thread-multi/PerlIO [ 116s] + all_dir=(${all_dir[@]} $el) [ 116s] + for dir in '`find ${base_dir} -type d | sort`' [ 116s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 116s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 116s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 116s] + el=armv7l-linux-thread-multi/auto [ 116s] + all_dir=(${all_dir[@]} $el) [ 116s] + for dir in '`find ${base_dir} -type d | sort`' [ 116s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 116s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 116s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 116s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 116s] + all_dir=(${all_dir[@]} $el) [ 116s] + for dir in '`find ${base_dir} -type d | sort`' [ 116s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 116s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 116s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 116s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 116s] + all_dir=(${all_dir[@]} $el) [ 116s] + for i in '${all_dir[@]}' [ 116s] + '[' armv7l-linux-thread-multi = auto ']' [ 116s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 116s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']' [ 116s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 116s] + RES= [ 116s] + '[' -n '' ']' [ 116s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 116s] + /bin/cat [ 116s] + for i in '${all_dir[@]}' [ 116s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 116s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 116s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO ']' [ 116s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 116s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 116s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 116s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 116s] + /bin/cat [ 116s] + for file in '$RES' [ 117s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 117s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 117s] + /bin/cat [ 117s] + for i in '${all_dir[@]}' [ 117s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 117s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 117s] + continue [ 117s] + for i in '${all_dir[@]}' [ 117s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 117s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 117s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 117s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 117s] + RES= [ 117s] + '[' -n '' ']' [ 117s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 117s] + /bin/cat [ 117s] + for i in '${all_dir[@]}' [ 117s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 117s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 117s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 117s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 117s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 117s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 117s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 117s] + /bin/cat [ 117s] + for file in '$RES' [ 117s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 117s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 117s] + /bin/cat [ 117s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man ']' [ 117s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 117s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/bin ']' [ 117s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.1 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 117s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 118s] 158 blocks [ 118s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 118s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 118s] + /usr/lib/rpm/check-buildroot [ 118s] + /usr/lib/rpm//brp-compress [ 118s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 118s] + /usr/lib/rpm/brp-python-hardlink [ 118s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 119s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 119s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 119s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 119s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 126s] Processing files: perl-PerlIO-gzip-0.20-1.1.armv7hl [ 126s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.1 perl-PerlIO-gzip(armv7hl-32) = 0.20-1.1 [ 126s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 126s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 126s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.1.armv7hl [ 126s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 126s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 126s] [ 126s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.1 perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.20-1.1 [ 126s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 126s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.1.armv7hl [ 126s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 126s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 126s] [ 126s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.1 perl-PerlIO-gzip-debuginfo(armv7hl-32) = 0.20-1.1 [ 126s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 126s] Recommends: perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.20-1.1 [ 126s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 127s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 127s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.20-1.1.armv7hl.rpm [ 127s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.20-1.1.armv7hl.rpm [ 127s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.20-1.1.armv7hl.rpm [ 127s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.faTbNp [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd perl-PerlIO-gzip-0.20 [ 127s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 127s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 127s] + exit 0 [ 127s] ... checking for files with abuild user/group [ 127s] ... creating baselibs [ 128s] [ 128s] 86c5bb0bb39f finished "build perl-PerlIO-gzip.spec" at Fri Dec 13 11:07:28 UTC 2024. [ 128s]