[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 86c5bb0bb39f started "build python3-editables.spec" at Fri Dec 13 11:18:44 UTC 2024. [ 0s] [ 0s] Building python3-editables for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 '31cd546ddb530bf965429438ef9c0673' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/python3-editables.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/python3-editables.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/python3-editables.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/42] preinstalling libmagic-data... [ 2s] [2/42] preinstalling libncurses... [ 2s] [3/42] preinstalling setup... [ 2s] [4/42] preinstalling filesystem... [ 2s] [5/42] preinstalling glibc... [ 2s] [6/42] preinstalling libgcc... [ 2s] [7/42] preinstalling bash... [ 2s] [8/42] preinstalling diffutils... [ 2s] [9/42] preinstalling grep... [ 2s] [10/42] preinstalling libattr... [ 2s] [11/42] preinstalling libblkid... [ 2s] [12/42] preinstalling libbz2... [ 2s] [13/42] preinstalling libcap... [ 2s] [14/42] preinstalling libfreebl3... [ 2s] [15/42] preinstalling liblua... [ 2s] [16/42] preinstalling liblzma... [ 2s] [17/42] preinstalling libpopt... [ 2s] [18/42] preinstalling libreadline... [ 2s] [19/42] preinstalling libsmack... [ 2s] [20/42] preinstalling libsqlite... [ 2s] [21/42] preinstalling libuuid... [ 2s] [22/42] preinstalling libxcrypt... [ 2s] [23/42] preinstalling libzstd1... [ 2s] [24/42] preinstalling nspr... [ 2s] [25/42] preinstalling sed... [ 2s] [26/42] preinstalling zlib... [ 2s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 9s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 11s] [29/42] preinstalling coreutils... [ 11s] [30/42] preinstalling libacl... [ 11s] [31/42] preinstalling libelf... [ 11s] [32/42] preinstalling libmount... [ 11s] [33/42] preinstalling smack... [ 11s] [34/42] preinstalling bzip2... [ 11s] [35/42] preinstalling libmagic... [ 11s] [36/42] preinstalling libxml2... [ 11s] [37/42] preinstalling tar... [ 11s] [38/42] preinstalling util-linux... [ 11s] [39/42] preinstalling util-linux-su... [ 11s] [40/42] preinstalling nss... [ 11s] [41/42] preinstalling libsoftokn3... [ 11s] [42/42] preinstalling rpm... [ 12s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-armv7hl postinstall script [ 12s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.2.0/liblto_plugin.so': No such file or directory [ 12s] running setup postinstall script [ 12s] chroot: failed to run command '': No such file or directory [ 12s] initializing rpm db... [ 13s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 13s] breaking dependency libxcrypt-devel -> glibc-devel [ 13s] cycle: libsoftokn3 -> nss [ 13s] breaking dependency nss -> libsoftokn3 [ 13s] done [ 13s] querying package ids... [ 13s] [1/113] cumulate libmagic-data-5.45-1.3 [ 13s] [2/113] cumulate python3-flit_core-3.9.0-1.1 [ 13s] [3/113] cumulate python3-pyparsing-3.1.1-1.1 [ 13s] [4/113] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 13s] [5/113] cumulate python3-six-1.16.0-1.1 [ 13s] [6/113] cumulate python3-typing_extensions-4.9.0-1.1 [ 13s] [7/113] cumulate setup-0.9-1.1 [ 13s] [8/113] cumulate filesystem-3.1-1.1 [ 13s] [9/113] cumulate python3-packaging-23.2-1.1 [ 13s] [10/113] cumulate glibc-2.39-1.6 [ 13s] [11/113] cumulate libatomic-14.2.0-1.6 [ 13s] [12/113] cumulate libgcc-14.2.0-1.6 [ 13s] [13/113] cumulate bash-3.2.57-1.1 [ 13s] [14/113] cumulate cpio-2.8-1.1 [ 13s] [15/113] cumulate diffutils-3.10-1.1 [ 13s] [16/113] cumulate findutils-4.3.8-1.3 [ 13s] [17/113] cumulate gdbm-1.8.3-1.6 [ 13s] [18/113] cumulate hostname-3.23-1.1 [ 13s] [19/113] cumulate libattr-2.5.1-1.3 [ 13s] [20/113] cumulate libblkid-2.39.3-1.3 [ 13s] [21/113] cumulate libbz2-1.0.8-1.4 [ 13s] [22/113] cumulate libcap-2.69-1.5 [ 13s] [23/113] cumulate libexpat-2.6.2-1.6 [ 13s] [24/113] cumulate libffi-3.4.2-1.6 [ 13s] [25/113] cumulate libfreebl3-3.98-1.6 [ 13s] [26/113] cumulate libgfortran-14.2.0-1.6 [ 13s] [27/113] cumulate libgomp-14.2.0-1.6 [ 13s] [28/113] cumulate libitm-14.2.0-1.6 [ 13s] [29/113] cumulate libltdl-2.4.7-1.6 [ 13s] [30/113] cumulate liblua-5.1.5-1.3 [ 13s] [31/113] cumulate liblzma-5.4.5-1.6 [ 13s] [32/113] cumulate libopenssl3-3.0.13-1.6 [ 13s] [33/113] cumulate libpcre-8.45-1.3 [ 13s] [34/113] cumulate libpopt-1.16-1.3 [ 13s] [35/113] cumulate libpython3_121_0-3.12.0-1.6 [ 13s] [36/113] cumulate libsmack-1.3.1-1.3 [ 13s] [37/113] cumulate libsmartcols-2.39.3-1.3 [ 13s] [38/113] cumulate libsqlite-3.44.0-1.3 [ 13s] [39/113] cumulate libstdc++-14.2.0-1.6 [ 13s] [40/113] cumulate libuuid-2.39.3-1.3 [ 13s] [41/113] cumulate libxcrypt-4.4.36-1.6 [ 13s] [42/113] cumulate libzstd1-1.5.5-1.4 [ 13s] [43/113] cumulate m4-1.4.19-1.1 [ 13s] [44/113] cumulate net-tools-2.0_20121208git-1.3 [ 13s] [45/113] cumulate nspr-4.35-1.3 [ 13s] [46/113] cumulate patch-2.7.6-1.3 [ 13s] [47/113] cumulate pkg-config-0.29.2-1.5 [ 13s] [48/113] cumulate sed-4.1c-1.3 [ 13s] [49/113] cumulate update-alternatives-1.22.2-1.1 [ 13s] [50/113] cumulate which-2.17-1.1 [ 13s] [51/113] cumulate zlib-1.3-1.6 [ 13s] [52/113] cumulate build-compare-2023.06.18-1.1 [ 13s] [53/113] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 13s] [54/113] cumulate libstdc++-devel-14.2.0-1.6 [ 13s] [55/113] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 13s] [56/113] cumulate cpp-14.2.0-1.6 [ 13s] [57/113] cumulate gcc-c++-14.2.0-1.6 [ 13s] [58/113] cumulate binutils-libs-2.43-1.6 [ 13s] [59/113] cumulate coreutils-6.9-14.1 [ 13s] [60/113] cumulate gawk-3.1.5-1.1 [ 13s] [61/113] cumulate grep-2.5.2-1.3 [ 13s] [62/113] cumulate libacl-2.3.2-1.3 [ 13s] [63/113] cumulate libcc1-14.2.0-1.6 [ 13s] [64/113] cumulate libelf-0.189-1.6 [ 13s] [65/113] cumulate libmount-2.39.3-1.3 [ 13s] [66/113] cumulate libubsan-14.2.0-1.6 [ 13s] [67/113] cumulate make-4.4-1.3 [ 13s] [68/113] cumulate nss-certs-3.98-1.6 [ 13s] [69/113] cumulate smack-1.3.1-1.3 [ 13s] [70/113] cumulate bzip2-1.0.8-1.4 [ 13s] [71/113] cumulate libfdisk-2.39.3-1.3 [ 13s] [72/113] cumulate libmagic-5.45-1.3 [ 13s] [73/113] cumulate libxml2-2.12.5-1.5 [ 13s] [74/113] cumulate xz-5.4.5-1.6 [ 13s] [75/113] cumulate perl-5.38.0-1.5 [ 13s] [76/113] cumulate build-mkbaselibs-20120927-1.1 [ 13s] [77/113] cumulate linux-glibc-devel-6.6-1.6 [ 13s] [78/113] cumulate terminfo-base-full-6.4-1.6 [ 13s] [79/113] cumulate autoconf-2.71-1.6 [ 13s] [80/113] cumulate file-5.45-1.3 [ 13s] [81/113] cumulate glibc-locale-2.39-1.6 [ 13s] [82/113] cumulate tar-1.17-1.1 [ 13s] [83/113] cumulate binutils-2.43-1.6 [ 13s] [84/113] cumulate gzip-1.3.12-1.3 [ 13s] [85/113] cumulate pam-1.1.6-1.5 [ 13s] [86/113] cumulate tzdata-2023c-1.1 [ 13s] [87/113] cumulate libdw-0.189-1.6 [ 13s] [88/113] cumulate libarchive-3.7.2-1.5 [ 13s] [89/113] cumulate gcc-14.2.0-1.6 [ 13s] [90/113] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 13s] [91/113] cumulate automake-1.16.5-1.6 [ 13s] [92/113] cumulate libasm-0.189-1.6 [ 13s] [93/113] cumulate libncurses6-6.4-1.6 [ 13s] [94/113] cumulate build-20120927-1.1 [ 13s] [95/113] cumulate libncurses-6.4-1.6 [ 13s] [96/113] cumulate less-643-1.1 [ 13s] [97/113] cumulate libreadline-5.2-1.5 [ 13s] [98/113] cumulate libtool-2.4.7-1.6 [ 13s] [99/113] cumulate elfutils-0.189-1.6 [ 13s] [100/113] cumulate python3-base-3.12.0-1.6 [ 13s] [101/113] cumulate util-linux-2.39.3-1.3 [ 13s] [102/113] cumulate python3-3.12.0-1.1 [ 13s] [103/113] cumulate python3-build-1.0.3-1.1 [ 13s] [104/113] cumulate util-linux-su-2.39.3-1.3 [ 13s] [105/113] cumulate python3-devel-3.12.0-1.6 [ 13s] [106/113] cumulate python3-setuptools-69.0.2-1.1 [ 13s] [107/113] cumulate python3-pip-23.3.1-1.1 [ 13s] [108/113] cumulate libxcrypt-devel-4.4.36-1.6 [ 13s] [109/113] cumulate nss-3.98-1.6 [ 13s] [110/113] cumulate glibc-devel-2.39-1.6 [ 13s] [111/113] cumulate libsoftokn3-3.98-1.6 [ 13s] [112/113] cumulate rpm-4.14.1.1-1.6 [ 13s] [113/113] cumulate rpm-build-4.14.1.1-1.6 [ 13s] now installing cumulated packages [ 14s] Preparing... ######################################## [ 14s] Updating / installing... [ 14s] setup-0.9-1.1 ######################################## [ 14s] filesystem-3.1-1.1 ######################################## [ 14s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 14s] python3-six-1.16.0-1.1 ######################################## [ 14s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 14s] python3-pyparsing-3.1.1-1.1 ######################################## [ 14s] python3-packaging-23.2-1.1 ######################################## [ 14s] libmagic-data-5.45-1.3 ######################################## [ 14s] python3-flit_core-3.9.0-1.1 ######################################## [ 14s] glibc-2.39-1.6 ######################################## [ 14s] libgcc-14.2.0-1.6 ######################################## [ 14s] bash-3.2.57-1.1 ######################################## [ 14s] zlib-1.3-1.6 ######################################## [ 15s] coreutils-6.9-14.1 ######################################## [ 15s] libbz2-1.0.8-1.4 ######################################## [ 15s] liblzma-5.4.5-1.6 ######################################## [ 15s] libstdc++-14.2.0-1.6 ######################################## [ 15s] libelf-0.189-1.6 ######################################## [ 15s] libxcrypt-4.4.36-1.6 ######################################## [ 15s] libdw-0.189-1.6 ######################################## [ 16s] libmagic-5.45-1.3 ######################################## [ 16s] libblkid-2.39.3-1.3 ######################################## [ 16s] nspr-4.35-1.3 ######################################## [ 16s] pam-1.1.6-1.5 ######################################## [ 16s] gdbm-1.8.3-1.6 ######################################## [ 18s] perl-5.38.0-1.5 ######################################## [ 18s] libcap-2.69-1.5 ######################################## [ 19s] libfreebl3-3.98-1.6 ######################################## [ 19s] liblua-5.1.5-1.3 ######################################## [ 19s] libopenssl3-3.0.13-1.6 ######################################## [ 19s] libpopt-1.16-1.3 ######################################## [ 19s] libpython3_121_0-3.12.0-1.6 ######################################## [ 20s] libsqlite-3.44.0-1.3 ######################################## [ 20s] libuuid-2.39.3-1.3 ######################################## [ 20s] libzstd1-1.5.5-1.4 ######################################## [ 20s] pkg-config-0.29.2-1.5 ######################################## [ 20s] build-mkbaselibs-20120927-1.1 ######################################## [ 20s] linux-glibc-devel-6.6-1.6 ######################################## [ 20s] terminfo-base-full-6.4-1.6 ######################################## [ 21s] libncurses6-6.4-1.6 ######################################## [ 21s] libreadline-5.2-1.5 ######################################## [ 21s] libfdisk-2.39.3-1.3 ######################################## [ 21s] nss-certs-3.98-1.6 ######################################## [ 21s] libsoftokn3-3.98-1.6 ######################################## [ 21s] nss-3.98-1.6 ######################################## [ 21s] libmount-2.39.3-1.3 ######################################## [ 22s] libasm-0.189-1.6 ######################################## [ 22s] libcc1-14.2.0-1.6 ######################################## [ 22s] libubsan-14.2.0-1.6 ######################################## [ 22s] libxml2-2.12.5-1.5 ######################################## [ 22s] xz-5.4.5-1.6 ######################################## [ 22s] bzip2-1.0.8-1.4 ######################################## [ 22s] gzip-1.3.12-1.3 ######################################## [ 22s] binutils-libs-2.43-1.6 ######################################## [ 23s] binutils-2.43-1.6 ######################################## [ 23s] make-4.4-1.3 ######################################## [ 23s] findutils-4.3.8-1.3 ######################################## [ 23s] libattr-2.5.1-1.3 ######################################## [ 23s] libacl-2.3.2-1.3 ######################################## [ 24s] tar-1.17-1.1 ######################################## [ 24s] libarchive-3.7.2-1.5 ######################################## [ 24s] rpm-4.14.1.1-1.6 ######################################## [ 24s] libexpat-2.6.2-1.6 ######################################## [ 25s] libffi-3.4.2-1.6 ######################################## [ 26s] python3-base-3.12.0-1.6 ######################################## [ 27s] python3-3.12.0-1.1 ######################################## [ 27s] python3-setuptools-69.0.2-1.1 ######################################## [ 27s] libgfortran-14.2.0-1.6 ######################################## [ 27s] libgomp-14.2.0-1.6 ######################################## [ 27s] libitm-14.2.0-1.6 ######################################## [ 27s] libltdl-2.4.7-1.6 ######################################## [ 28s] libpcre-8.45-1.3 ######################################## [ 28s] libsmack-1.3.1-1.3 ######################################## [ 28s] libsmartcols-2.39.3-1.3 ######################################## [ 28s] m4-1.4.19-1.1 ######################################## [ 28s] autoconf-2.71-1.6 ######################################## [ 28s] automake-1.16.5-1.6 ######################################## [ 29s] patch-2.7.6-1.3 ######################################## [ 29s] sed-4.1c-1.3 ######################################## [ 29s] util-linux-2.39.3-1.3 ######################################## [ 29s] libatomic-14.2.0-1.6 ######################################## [ 30s] libtool-2.4.7-1.6 ######################################## [ 30s] python3-pip-23.3.1-1.1 ######################################## [ 30s] python3-build-1.0.3-1.1 ######################################## [ 30s] build-20120927-1.1 ######################################## [ 30s] libncurses-6.4-1.6 ######################################## [ 31s] libstdc++-devel-14.2.0-1.6 ######################################## [ 31s] build-compare-2023.06.18-1.1 ######################################## [ 31s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 35s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 37s] gcc-14.2.0-1.6 ######################################## [ 37s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 37s] glibc-devel-2.39-1.6 ######################################## [ 48s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 49s] rpm-build-4.14.1.1-1.6 ######################################## [ 49s] util-linux-su-2.39.3-1.3 ######################################## [ 49s] smack-1.3.1-1.3 ######################################## [ 49s] grep-2.5.2-1.3 ######################################## [ 49s] python3-devel-3.12.0-1.6 ######################################## [ 49s] elfutils-0.189-1.6 ######################################## [ 49s] less-643-1.1 ######################################## [ 49s] file-5.45-1.3 ######################################## [ 49s] glibc-locale-2.39-1.6 ######################################## [ 49s] tzdata-2023c-1.1 ######################################## [ 50s] cpp-14.2.0-1.6 ######################################## [ 51s] gcc-c++-14.2.0-1.6 ######################################## [ 51s] gawk-3.1.5-1.1 ######################################## [ 51s] cpio-2.8-1.1 ######################################## [ 52s] diffutils-3.10-1.1 ######################################## [ 52s] hostname-3.23-1.1 ######################################## [ 52s] net-tools-2.0_20121208git-1.3 ######################################## [ 52s] update-alternatives-1.22.2-1.1 ######################################## [ 52s] which-2.17-1.1 ######################################## [ 52s] now finalizing build dir... [ 53s] ----------------------------------------------------------------- [ 53s] I have the following modifications for python3-editables.spec: [ 53s] 4c4 [ 53s] < Release: 0 [ 53s] --- [ 53s] > Release: 1.1 [ 53s] build target is armv7hl-tizen-linux [ 53s] ----------------------------------------------------------------- [ 53s] ----- building python3-editables.spec (user abuild) [ 53s] ----------------------------------------------------------------- [ 53s] ----------------------------------------------------------------- [ 54s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/31cd546ddb530bf965429438ef9c0673-python3-editables' /home/abuild/rpmbuild/SOURCES/python3-editables.spec [ 54s] Building target platforms: armv7hl-tizen-linux [ 54s] Building for target armv7hl-tizen-linux [ 54s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.s60CwX [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + rm -rf editables-0.5 [ 54s] + /bin/tar -xof - [ 54s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/editables-0.5.tar.gz [ 54s] + STATUS=0 [ 54s] + '[' 0 -ne 0 ']' [ 54s] + cd editables-0.5 [ 54s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 54s] + exit 0 [ 54s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.z1LnVU [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd editables-0.5 [ 54s] + ref=/usr/lib/rpm [ 54s] + mints=0 [ 54s] + case $(uname -m) in [ 54s] ++ uname -m [ 54s] + for s in guess sub [ 54s] ++ find -maxdepth 8 -name config.guess [ 54s] + for s in guess sub [ 54s] ++ find -maxdepth 8 -name config.sub [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + LDFLAGS= [ 54s] + export LDFLAGS [ 54s] + cp /home/abuild/rpmbuild/SOURCES/python3-editables.manifest . [ 54s] + /usr/bin/python3 -m build -n [ 56s] * Getting build dependencies for sdist... [ 58s] * Building sdist... [ 59s] * Building wheel from sdist [ 59s] * Getting build dependencies for wheel... [ 61s] * Building wheel... [ 63s] Successfully built editables-0.5.tar.gz and editables-0.5-py3-none-any.whl [ 63s] + exit 0 [ 63s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ogeXaX [ 63s] + umask 022 [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + cd editables-0.5 [ 63s] + LANG=C [ 63s] + export LANG [ 63s] + unset DISPLAY [ 63s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 63s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 63s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm ./dist/editables-0.5-py3-none-any.whl [ 68s] Processing ./dist/editables-0.5-py3-none-any.whl [ 69s] Installing collected packages: editables [ 69s] Successfully installed editables-0.5 [ 70s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.5-1.1 --unique-debug-src-base python3-editables-0.5-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/editables-0.5 [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/editables-0.5/python3-editables-debuginfo.manifest [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/editables-0.5/python3-editables-debugsource.manifest [ 70s] + /usr/lib/rpm/check-buildroot [ 70s] + /usr/lib/rpm//brp-compress [ 70s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 70s] + /usr/lib/rpm/brp-python-hardlink [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 71s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/editables-0.5/isu.list [ 71s] ~/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm ~/rpmbuild/BUILD/editables-0.5 [ 71s] ~/rpmbuild/BUILD/editables-0.5 [ 71s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 73s] Processing files: python3-editables-0.5-1.1.noarch [ 73s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 73s] IiAvPgogICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 73s] [ 73s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ziasKx [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd editables-0.5 [ 73s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm/usr/share/licenses/python3-editables [ 73s] + export LC_ALL=C [ 73s] + LC_ALL=C [ 73s] + export LICENSEDIR [ 73s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm/usr/share/licenses/python3-editables [ 73s] + cp -pr LICENSE.txt /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm/usr/share/licenses/python3-editables [ 73s] + exit 0 [ 74s] Provides: python3-editables = 0.5-1.1 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 74s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-editables-0.5-1.1.src.rpm [ 74s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-editables-0.5-1.1.noarch.rpm [ 74s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.xEzNsT [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd editables-0.5 [ 74s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 74s] + exit 0 [ 75s] ... checking for files with abuild user/group [ 75s] ... creating baselibs [ 76s] [ 76s] 86c5bb0bb39f finished "build python3-editables.spec" at Fri Dec 13 11:20:00 UTC 2024. [ 76s]