[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 86c5bb0bb39f started "build python3-pygments.spec" at Fri Dec 13 11:25:01 UTC 2024. [ 0s] [ 0s] Building python3-pygments for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 'ace0224db7ca624500488da785307792' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build-srcdir/python3-pygments.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build-srcdir/python3-pygments.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/17/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build-srcdir/python3-pygments.spec build ... [ 2s] registering binfmt handlers for cross build [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/42] preinstalling libmagic-data... [ 5s] [2/42] preinstalling libncurses... [ 5s] [3/42] preinstalling setup... [ 6s] [4/42] preinstalling filesystem... [ 6s] [5/42] preinstalling glibc... [ 6s] [6/42] preinstalling libgcc... [ 6s] [7/42] preinstalling bash... [ 7s] [8/42] preinstalling diffutils... [ 7s] [9/42] preinstalling grep... [ 7s] [10/42] preinstalling libattr... [ 7s] [11/42] preinstalling libblkid... [ 7s] [12/42] preinstalling libbz2... [ 8s] [13/42] preinstalling libcap... [ 8s] [14/42] preinstalling libfreebl3... [ 8s] [15/42] preinstalling liblua... [ 8s] [16/42] preinstalling liblzma... [ 8s] [17/42] preinstalling libpopt... [ 9s] [18/42] preinstalling libreadline... [ 9s] [19/42] preinstalling libsmack... [ 9s] [20/42] preinstalling libsqlite... [ 9s] [21/42] preinstalling libuuid... [ 9s] [22/42] preinstalling libxcrypt... [ 10s] [23/42] preinstalling libzstd1... [ 10s] [24/42] preinstalling nspr... [ 10s] [25/42] preinstalling sed... [ 10s] [26/42] preinstalling zlib... [ 10s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 31s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 35s] [29/42] preinstalling coreutils... [ 35s] [30/42] preinstalling libacl... [ 36s] [31/42] preinstalling libelf... [ 36s] [32/42] preinstalling libmount... [ 36s] [33/42] preinstalling smack... [ 36s] [34/42] preinstalling bzip2... [ 36s] [35/42] preinstalling libmagic... [ 36s] [36/42] preinstalling libxml2... [ 37s] [37/42] preinstalling tar... [ 37s] [38/42] preinstalling util-linux... [ 37s] [39/42] preinstalling util-linux-su... [ 37s] [40/42] preinstalling nss... [ 38s] [41/42] preinstalling libsoftokn3... [ 38s] [42/42] preinstalling rpm... [ 39s] running qemu-linux-user-x86_64-cross postinstall script [ 40s] running qemu-accel-x86_64-armv7hl postinstall script [ 40s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.2.0/liblto_plugin.so': No such file or directory [ 40s] running setup postinstall script [ 40s] chroot: failed to run command '': No such file or directory [ 40s] initializing rpm db... [ 41s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 41s] breaking dependency libxcrypt-devel -> glibc-devel [ 41s] cycle: libsoftokn3 -> nss [ 41s] breaking dependency nss -> libsoftokn3 [ 41s] done [ 41s] querying package ids... [ 44s] [1/117] cumulate libmagic-data-5.45-1.3 [ 44s] [2/117] cumulate python3-editables-0.5-1.1 [ 44s] [3/117] cumulate python3-pathspec-0.12.1-1.1 [ 44s] [4/117] cumulate python3-pluggy-1.3.0-1.1 [ 44s] [5/117] cumulate python3-pyparsing-3.1.1-1.1 [ 44s] [6/117] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 44s] [7/117] cumulate python3-six-1.16.0-1.1 [ 44s] [8/117] cumulate python3-trove_classifiers-2023.11.29-1.1 [ 44s] [9/117] cumulate python3-typing_extensions-4.9.0-1.1 [ 44s] [10/117] cumulate setup-0.9-1.1 [ 44s] [11/117] cumulate filesystem-3.1-1.1 [ 44s] [12/117] cumulate python3-packaging-23.2-1.1 [ 44s] [13/117] cumulate glibc-2.39-1.6 [ 44s] [14/117] cumulate libatomic-14.2.0-1.6 [ 44s] [15/117] cumulate libgcc-14.2.0-1.6 [ 44s] [16/117] cumulate bash-3.2.57-1.1 [ 44s] [17/117] cumulate cpio-2.8-1.1 [ 44s] [18/117] cumulate diffutils-3.10-1.1 [ 44s] [19/117] cumulate findutils-4.3.8-1.3 [ 44s] [20/117] cumulate gdbm-1.8.3-1.6 [ 44s] [21/117] cumulate hostname-3.23-1.1 [ 44s] [22/117] cumulate libattr-2.5.1-1.3 [ 44s] [23/117] cumulate libblkid-2.39.3-1.3 [ 44s] [24/117] cumulate libbz2-1.0.8-1.4 [ 44s] [25/117] cumulate libcap-2.69-1.5 [ 44s] [26/117] cumulate libexpat-2.6.2-1.6 [ 44s] [27/117] cumulate libffi-3.4.2-1.6 [ 44s] [28/117] cumulate libfreebl3-3.98-1.6 [ 44s] [29/117] cumulate libgfortran-14.2.0-1.6 [ 44s] [30/117] cumulate libgomp-14.2.0-1.6 [ 44s] [31/117] cumulate libitm-14.2.0-1.6 [ 44s] [32/117] cumulate libltdl-2.4.7-1.6 [ 44s] [33/117] cumulate liblua-5.1.5-1.3 [ 44s] [34/117] cumulate liblzma-5.4.5-1.6 [ 44s] [35/117] cumulate libopenssl3-3.0.13-1.6 [ 44s] [36/117] cumulate libpcre-8.45-1.3 [ 44s] [37/117] cumulate libpopt-1.16-1.3 [ 44s] [38/117] cumulate libpython3_121_0-3.12.0-1.6 [ 44s] [39/117] cumulate libsmack-1.3.1-1.3 [ 44s] [40/117] cumulate libsmartcols-2.39.3-1.3 [ 44s] [41/117] cumulate libsqlite-3.44.0-1.3 [ 44s] [42/117] cumulate libstdc++-14.2.0-1.6 [ 44s] [43/117] cumulate libuuid-2.39.3-1.3 [ 44s] [44/117] cumulate libxcrypt-4.4.36-1.6 [ 44s] [45/117] cumulate libzstd1-1.5.5-1.4 [ 44s] [46/117] cumulate m4-1.4.19-1.1 [ 44s] [47/117] cumulate net-tools-2.0_20121208git-1.3 [ 44s] [48/117] cumulate nspr-4.35-1.3 [ 44s] [49/117] cumulate patch-2.7.6-1.3 [ 44s] [50/117] cumulate pkg-config-0.29.2-1.5 [ 44s] [51/117] cumulate sed-4.1c-1.3 [ 44s] [52/117] cumulate update-alternatives-1.22.2-1.1 [ 44s] [53/117] cumulate which-2.17-1.1 [ 44s] [54/117] cumulate zlib-1.3-1.6 [ 44s] [55/117] cumulate build-compare-2023.06.18-1.1 [ 44s] [56/117] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 44s] [57/117] cumulate libstdc++-devel-14.2.0-1.6 [ 44s] [58/117] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 44s] [59/117] cumulate cpp-14.2.0-1.6 [ 44s] [60/117] cumulate gcc-c++-14.2.0-1.6 [ 44s] [61/117] cumulate binutils-libs-2.43-1.6 [ 44s] [62/117] cumulate coreutils-6.9-14.1 [ 44s] [63/117] cumulate gawk-3.1.5-1.1 [ 44s] [64/117] cumulate grep-2.5.2-1.3 [ 44s] [65/117] cumulate libacl-2.3.2-1.3 [ 44s] [66/117] cumulate libcc1-14.2.0-1.6 [ 44s] [67/117] cumulate libelf-0.189-1.6 [ 44s] [68/117] cumulate libmount-2.39.3-1.3 [ 44s] [69/117] cumulate libubsan-14.2.0-1.6 [ 44s] [70/117] cumulate make-4.4-1.3 [ 44s] [71/117] cumulate nss-certs-3.98-1.6 [ 44s] [72/117] cumulate smack-1.3.1-1.3 [ 44s] [73/117] cumulate bzip2-1.0.8-1.4 [ 44s] [74/117] cumulate libfdisk-2.39.3-1.3 [ 44s] [75/117] cumulate libmagic-5.45-1.3 [ 44s] [76/117] cumulate libxml2-2.12.5-1.5 [ 44s] [77/117] cumulate xz-5.4.5-1.6 [ 44s] [78/117] cumulate perl-5.38.0-1.5 [ 44s] [79/117] cumulate build-mkbaselibs-20120927-1.1 [ 44s] [80/117] cumulate linux-glibc-devel-6.6-1.6 [ 44s] [81/117] cumulate terminfo-base-full-6.4-1.6 [ 44s] [82/117] cumulate autoconf-2.71-1.6 [ 44s] [83/117] cumulate file-5.45-1.3 [ 44s] [84/117] cumulate glibc-locale-2.39-1.6 [ 44s] [85/117] cumulate tar-1.17-1.1 [ 44s] [86/117] cumulate binutils-2.43-1.6 [ 44s] [87/117] cumulate gzip-1.3.12-1.3 [ 44s] [88/117] cumulate pam-1.1.6-1.5 [ 44s] [89/117] cumulate tzdata-2023c-1.1 [ 44s] [90/117] cumulate libdw-0.189-1.6 [ 44s] [91/117] cumulate libarchive-3.7.2-1.5 [ 44s] [92/117] cumulate gcc-14.2.0-1.6 [ 44s] [93/117] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 44s] [94/117] cumulate automake-1.16.5-1.6 [ 44s] [95/117] cumulate libasm-0.189-1.6 [ 44s] [96/117] cumulate libncurses6-6.4-1.6 [ 44s] [97/117] cumulate build-20120927-1.1 [ 44s] [98/117] cumulate libncurses-6.4-1.6 [ 44s] [99/117] cumulate less-643-1.1 [ 44s] [100/117] cumulate libreadline-5.2-1.5 [ 44s] [101/117] cumulate libtool-2.4.7-1.6 [ 44s] [102/117] cumulate elfutils-0.189-1.6 [ 44s] [103/117] cumulate python3-base-3.12.0-1.6 [ 44s] [104/117] cumulate util-linux-2.39.3-1.3 [ 44s] [105/117] cumulate python3-3.12.0-1.1 [ 44s] [106/117] cumulate python3-build-1.0.3-1.1 [ 44s] [107/117] cumulate util-linux-su-2.39.3-1.3 [ 44s] [108/117] cumulate python3-devel-3.12.0-1.6 [ 44s] [109/117] cumulate python3-hatchling-1.21.0-1.1 [ 44s] [110/117] cumulate python3-setuptools-69.0.2-1.1 [ 44s] [111/117] cumulate python3-pip-23.3.1-1.1 [ 44s] [112/117] cumulate libxcrypt-devel-4.4.36-1.6 [ 44s] [113/117] cumulate nss-3.98-1.6 [ 44s] [114/117] cumulate glibc-devel-2.39-1.6 [ 44s] [115/117] cumulate libsoftokn3-3.98-1.6 [ 44s] [116/117] cumulate rpm-4.14.1.1-1.6 [ 44s] [117/117] cumulate rpm-build-4.14.1.1-1.6 [ 44s] now installing cumulated packages [ 46s] Preparing... ######################################## [ 46s] Updating / installing... [ 46s] setup-0.9-1.1 ######################################## [ 46s] filesystem-3.1-1.1 ######################################## [ 46s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 46s] python3-trove_classifiers-2023.11.29-1######################################## [ 46s] python3-six-1.16.0-1.1 ######################################## [ 46s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 46s] python3-pyparsing-3.1.1-1.1 ######################################## [ 46s] python3-packaging-23.2-1.1 ######################################## [ 46s] python3-pluggy-1.3.0-1.1 ######################################## [ 46s] python3-pathspec-0.12.1-1.1 ######################################## [ 46s] python3-editables-0.5-1.1 ######################################## [ 46s] libmagic-data-5.45-1.3 ######################################## [ 47s] glibc-2.39-1.6 ######################################## [ 47s] libgcc-14.2.0-1.6 ######################################## [ 47s] bash-3.2.57-1.1 ######################################## [ 47s] zlib-1.3-1.6 ######################################## [ 48s] coreutils-6.9-14.1 ######################################## [ 48s] libbz2-1.0.8-1.4 ######################################## [ 48s] liblzma-5.4.5-1.6 ######################################## [ 48s] libstdc++-14.2.0-1.6 ######################################## [ 48s] libelf-0.189-1.6 ######################################## [ 48s] libxcrypt-4.4.36-1.6 ######################################## [ 49s] libdw-0.189-1.6 ######################################## [ 49s] libmagic-5.45-1.3 ######################################## [ 49s] libblkid-2.39.3-1.3 ######################################## [ 49s] nspr-4.35-1.3 ######################################## [ 49s] pam-1.1.6-1.5 ######################################## [ 50s] gdbm-1.8.3-1.6 ######################################## [ 52s] perl-5.38.0-1.5 ######################################## [ 52s] libcap-2.69-1.5 ######################################## [ 52s] libfreebl3-3.98-1.6 ######################################## [ 52s] liblua-5.1.5-1.3 ######################################## [ 53s] libopenssl3-3.0.13-1.6 ######################################## [ 53s] libpopt-1.16-1.3 ######################################## [ 53s] libpython3_121_0-3.12.0-1.6 ######################################## [ 53s] libsqlite-3.44.0-1.3 ######################################## [ 53s] libuuid-2.39.3-1.3 ######################################## [ 53s] libzstd1-1.5.5-1.4 ######################################## [ 54s] pkg-config-0.29.2-1.5 ######################################## [ 54s] build-mkbaselibs-20120927-1.1 ######################################## [ 54s] linux-glibc-devel-6.6-1.6 ######################################## [ 54s] terminfo-base-full-6.4-1.6 ######################################## [ 54s] libncurses6-6.4-1.6 ######################################## [ 54s] libreadline-5.2-1.5 ######################################## [ 55s] libfdisk-2.39.3-1.3 ######################################## [ 55s] nss-certs-3.98-1.6 ######################################## [ 55s] libsoftokn3-3.98-1.6 ######################################## [ 55s] nss-3.98-1.6 ######################################## [ 55s] libmount-2.39.3-1.3 ######################################## [ 55s] libasm-0.189-1.6 ######################################## [ 55s] libcc1-14.2.0-1.6 ######################################## [ 55s] libubsan-14.2.0-1.6 ######################################## [ 56s] libxml2-2.12.5-1.5 ######################################## [ 56s] xz-5.4.5-1.6 ######################################## [ 56s] bzip2-1.0.8-1.4 ######################################## [ 56s] gzip-1.3.12-1.3 ######################################## [ 56s] binutils-libs-2.43-1.6 ######################################## [ 56s] binutils-2.43-1.6 ######################################## [ 56s] make-4.4-1.3 ######################################## [ 57s] findutils-4.3.8-1.3 ######################################## [ 57s] libattr-2.5.1-1.3 ######################################## [ 57s] libacl-2.3.2-1.3 ######################################## [ 57s] tar-1.17-1.1 ######################################## [ 57s] libarchive-3.7.2-1.5 ######################################## [ 57s] rpm-4.14.1.1-1.6 ######################################## [ 58s] libexpat-2.6.2-1.6 ######################################## [ 58s] libffi-3.4.2-1.6 ######################################## [ 59s] python3-base-3.12.0-1.6 ######################################## [ 59s] python3-3.12.0-1.1 ######################################## [ 59s] python3-setuptools-69.0.2-1.1 ######################################## [ 59s] libgfortran-14.2.0-1.6 ######################################## [ 59s] libgomp-14.2.0-1.6 ######################################## [ 60s] libitm-14.2.0-1.6 ######################################## [ 60s] libltdl-2.4.7-1.6 ######################################## [ 60s] libpcre-8.45-1.3 ######################################## [ 60s] libsmack-1.3.1-1.3 ######################################## [ 60s] libsmartcols-2.39.3-1.3 ######################################## [ 60s] m4-1.4.19-1.1 ######################################## [ 61s] autoconf-2.71-1.6 ######################################## [ 61s] automake-1.16.5-1.6 ######################################## [ 61s] patch-2.7.6-1.3 ######################################## [ 61s] sed-4.1c-1.3 ######################################## [ 61s] util-linux-2.39.3-1.3 ######################################## [ 61s] libatomic-14.2.0-1.6 ######################################## [ 62s] libtool-2.4.7-1.6 ######################################## [ 62s] python3-pip-23.3.1-1.1 ######################################## [ 62s] python3-build-1.0.3-1.1 ######################################## [ 62s] python3-hatchling-1.21.0-1.1 ######################################## [ 62s] build-20120927-1.1 ######################################## [ 62s] libncurses-6.4-1.6 ######################################## [ 63s] libstdc++-devel-14.2.0-1.6 ######################################## [ 63s] build-compare-2023.06.18-1.1 ######################################## [ 63s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 66s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 68s] gcc-14.2.0-1.6 ######################################## [ 68s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 68s] glibc-devel-2.39-1.6 ######################################## [ 77s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 78s] rpm-build-4.14.1.1-1.6 ######################################## [ 78s] util-linux-su-2.39.3-1.3 ######################################## [ 78s] smack-1.3.1-1.3 ######################################## [ 78s] grep-2.5.2-1.3 ######################################## [ 78s] python3-devel-3.12.0-1.6 ######################################## [ 78s] elfutils-0.189-1.6 ######################################## [ 78s] less-643-1.1 ######################################## [ 78s] file-5.45-1.3 ######################################## [ 78s] glibc-locale-2.39-1.6 ######################################## [ 78s] tzdata-2023c-1.1 ######################################## [ 80s] cpp-14.2.0-1.6 ######################################## [ 81s] gcc-c++-14.2.0-1.6 ######################################## [ 81s] gawk-3.1.5-1.1 ######################################## [ 81s] cpio-2.8-1.1 ######################################## [ 81s] diffutils-3.10-1.1 ######################################## [ 81s] hostname-3.23-1.1 ######################################## [ 81s] net-tools-2.0_20121208git-1.3 ######################################## [ 81s] update-alternatives-1.22.2-1.1 ######################################## [ 81s] which-2.17-1.1 ######################################## [ 81s] now finalizing build dir... [ 82s] ----------------------------------------------------------------- [ 82s] I have the following modifications for python3-pygments.spec: [ 82s] 4c4 [ 82s] < Release: 1 [ 82s] --- [ 82s] > Release: 1.1 [ 82s] build target is armv7hl-tizen-linux [ 82s] ----------------------------------------------------------------- [ 82s] ----- building python3-pygments.spec (user abuild) [ 82s] ----------------------------------------------------------------- [ 82s] ----------------------------------------------------------------- [ 83s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/ace0224db7ca624500488da785307792-python3-pygments' /home/abuild/rpmbuild/SOURCES/python3-pygments.spec [ 83s] Building target platforms: armv7hl-tizen-linux [ 83s] Building for target armv7hl-tizen-linux [ 83s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.zIOu8x [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + rm -rf python3-pygments-2.17.2 [ 83s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-pygments-2.17.2.tar.gz [ 83s] + /bin/tar -xof - [ 83s] + STATUS=0 [ 83s] + '[' 0 -ne 0 ']' [ 83s] + cd python3-pygments-2.17.2 [ 83s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 83s] + echo 'Patch #0 (0001-Bump-to-2.17.2.patch):' [ 83s] Patch #0 (0001-Bump-to-2.17.2.patch): [ 83s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 83s] patching file .gitignore [ 83s] + cp /home/abuild/rpmbuild/SOURCES/python3-pygments.manifest . [ 83s] + exit 0 [ 83s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.docH0k [ 84s] + umask 022 [ 84s] + cd /home/abuild/rpmbuild/BUILD [ 84s] + cd python3-pygments-2.17.2 [ 84s] + ref=/usr/lib/rpm [ 84s] + mints=0 [ 84s] + case $(uname -m) in [ 84s] ++ uname -m [ 84s] + for s in guess sub [ 84s] ++ find -maxdepth 8 -name config.guess [ 84s] + for s in guess sub [ 84s] ++ find -maxdepth 8 -name config.sub [ 84s] + LANG=C [ 84s] + export LANG [ 84s] + unset DISPLAY [ 84s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 84s] + export CFLAGS [ 84s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 84s] + export CXXFLAGS [ 84s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 84s] + export FFLAGS [ 84s] + LDFLAGS= [ 84s] + export LDFLAGS [ 84s] + /usr/bin/python3 -m build -n [ 85s] * Getting build dependencies for sdist... [ 87s] * Building sdist... [ 108s] * Building wheel from sdist [ 108s] * Getting build dependencies for wheel... [ 109s] * Building wheel... [ 111s] Successfully built pygments-2.17.2.tar.gz and pygments-2.17.2-py3-none-any.whl [ 111s] + exit 0 [ 111s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.191C6A [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd python3-pygments-2.17.2 [ 111s] + LANG=C [ 111s] + export LANG [ 111s] + unset DISPLAY [ 111s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 111s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 111s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm ./dist/pygments-2.17.2-py3-none-any.whl [ 115s] Processing ./dist/pygments-2.17.2-py3-none-any.whl [ 116s] Installing collected packages: pygments [ 121s] WARNING: The script pygmentize is installed in '/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/bin' which is not on PATH. [ 121s] Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. [ 121s] Successfully installed pygments-2.17.2 [ 121s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.17.2-1.1 --unique-debug-src-base python3-pygments-2.17.2-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2 [ 122s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debuginfo.manifest [ 122s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debugsource.manifest [ 122s] + /usr/lib/rpm/check-buildroot [ 122s] + /usr/lib/rpm//brp-compress [ 122s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 123s] + /usr/lib/rpm/brp-python-hardlink [ 152s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 152s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/isu.list [ 152s] ~/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 152s] ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 152s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 154s] Processing files: python3-pygments-2.17.2-1.1.noarch [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ujaET8 [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd python3-pygments-2.17.2 [ 154s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 154s] + export LC_ALL=C [ 154s] + LC_ALL=C [ 154s] + export LICENSEDIR [ 154s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 154s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 154s] + exit 0 [ 228s] Provides: python3-pygments = 2.17.2-1.1 [ 228s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 228s] Requires: /usr/bin/python3 [ 228s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 228s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-pygments-2.17.2-1.1.src.rpm [ 231s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-pygments-2.17.2-1.1.noarch.rpm [ 231s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.mpgbvR [ 231s] + umask 022 [ 231s] + cd /home/abuild/rpmbuild/BUILD [ 231s] + cd python3-pygments-2.17.2 [ 231s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 231s] + exit 0 [ 231s] ... checking for files with abuild user/group [ 231s] ... creating baselibs [ 232s] [ 232s] 86c5bb0bb39f finished "build python3-pygments.spec" at Fri Dec 13 11:28:53 UTC 2024. [ 232s]