[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.11 [ 0s] Using BUILD_ARCH=riscv64:noarch [ 0s] [ 0s] [ 0s] ip-192-168-56-230 started "build ise-engine-default.spec" at Fri Dec 6 17:38:46 UTC 2024. [ 0s] [ 0s] [ 0s] processing recipe /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/sources/tizen_unified_x_asan_standard/ise-engine-default-1.0.11-1/ise-engine-default.spec ... [ 0s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache --define jobs 8 --define _smp_mflags -j8 --repository /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/repos/tizen_unified_x_asan_standard/riscv64/RPMS --repository http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/packages/ --repository http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/debug/ --clean --nocumulate /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/sources/tizen_unified_x_asan_standard/ise-engine-default-1.0.11-1/ise-engine-default.spec build ... [ 3s] initializing /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.11/.srcfiles.cache ... [ 4s] /usr/lib/build/createdirdeps --oldfile /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.11/.srcfiles.cache /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/repos/tizen_unified_x_asan_standard/riscv64/RPMS [ 4s] /usr/lib/build/createrepomddeps --cachedir=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/packages/ [ 5s] /usr/lib/build/createrepomddeps --cachedir=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/debug/ [ 5s] expanding package dependencies... [ 6s] copying qemu [ 6s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 6s] [ 6s] registering binfmt handlers for cross build [ 6s] calculating packages to download... [ 8s] cycle: nss -> libsoftokn3 [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] [1/47] preinstalling libmagic-data... [ 8s] [2/47] preinstalling libncurses... [ 8s] [3/47] preinstalling setup... [ 8s] [4/47] preinstalling filesystem... [ 8s] [5/47] preinstalling glibc... [ 8s] [6/47] preinstalling libgcc... [ 8s] [7/47] preinstalling libstdc++... [ 8s] [8/47] preinstalling libasan... [ 8s] [9/47] preinstalling findutils... [ 8s] [10/47] preinstalling grep... [ 8s] [11/47] preinstalling libattr... [ 8s] [12/47] preinstalling libbz2... [ 8s] [13/47] preinstalling liblua... [ 8s] [14/47] preinstalling libpopt... [ 8s] [15/47] preinstalling libsmack... [ 8s] [16/47] preinstalling libuuid... [ 8s] [17/47] preinstalling libxcrypt... [ 8s] [18/47] preinstalling nspr... [ 8s] [19/47] preinstalling sed... [ 8s] [20/47] preinstalling zlib... [ 8s] [21/47] preinstalling bash... [ 8s] [22/47] preinstalling diffutils... [ 8s] [23/47] preinstalling libblkid... [ 8s] [24/47] preinstalling libcap... [ 8s] [25/47] preinstalling libfreebl3... [ 8s] [26/47] preinstalling liblzma... [ 8s] [27/47] preinstalling libreadline... [ 8s] [28/47] preinstalling libsqlite... [ 8s] [29/47] preinstalling libzstd1... [ 8s] [30/47] preinstalling qemu-accel-x86_64-riscv64... [ 13s] [31/47] preinstalling qemu-linux-user-x86_64-cross... [ 14s] [32/47] preinstalling asan-build-env... [ 14s] [33/47] preinstalling libacl... [ 14s] [34/47] preinstalling libelf... [ 14s] [35/47] preinstalling smack... [ 14s] [36/47] preinstalling bzip2... [ 14s] [37/47] preinstalling coreutils... [ 14s] [38/47] preinstalling libmagic... [ 14s] [39/47] preinstalling libmount... [ 14s] [40/47] preinstalling libxml2... [ 14s] [41/47] preinstalling tar... [ 14s] [42/47] preinstalling util-linux... [ 14s] [43/47] preinstalling util-linux-su... [ 14s] [44/47] preinstalling nss... [ 14s] [45/47] preinstalling libsoftokn3... [ 14s] [46/47] preinstalling rpm... [ 15s] [47/47] preinstalling asan-force-options... [ 15s] [ 15s] running qemu-linux-user-x86_64-cross postinstall script [ 17s] running qemu-accel-x86_64-riscv64 postinstall script [ 17s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0/liblto_plugin.so': No such file or directory [ 17s] running setup postinstall script [ 17s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 17s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 17s] running asan-build-env postinstall script [ 19s] running asan-force-options postinstall script [ 35s] initializing rpm db... [ 35s] reordering...cycle: bash -> glibc -> filesystem -> setup -> asan-runtime-env [ 35s] breaking dependency bash -> glibc [ 35s] cycle: bash -> libasan -> glibc -> filesystem -> setup -> asan-runtime-env [ 35s] breaking dependency libasan -> glibc [ 35s] cycle: bash -> libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env [ 35s] breaking dependency asan-runtime-env -> bash [ 35s] cycle: bash -> libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 35s] breaking dependency coreutils -> bash [ 35s] cycle: glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 35s] breaking dependency coreutils -> glibc [ 35s] cycle: libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 35s] breaking dependency libasan -> libgcc [ 35s] cycle: libasan -> libstdc++ -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 35s] breaking dependency libstdc++ -> glibc [ 35s] cycle: libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 35s] breaking dependency coreutils -> libasan [ 35s] cycle: libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 35s] breaking dependency asan-runtime-env -> coreutils [ 35s] cycle: libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env [ 35s] breaking dependency setup -> asan-runtime-env [ 35s] cycle: gio-branding-upstream -> libgio [ 35s] breaking dependency libgio -> gio-branding-upstream [ 35s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 35s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 35s] cycle: ecore-core -> efl [ 35s] breaking dependency ecore-core -> efl [ 35s] cycle: ecore-core -> eina -> efl [ 35s] breaking dependency efl -> ecore-core [ 35s] cycle: efl -> ecore-con [ 35s] breaking dependency ecore-con -> efl [ 35s] cycle: ecore-core -> eina -> efl -> ecore-con [ 35s] breaking dependency ecore-core -> eina [ 35s] cycle: ecore-core -> eo -> efl -> ecore-con [ 35s] breaking dependency ecore-con -> ecore-core [ 35s] cycle: efl -> ecore-con -> eet [ 35s] breaking dependency efl -> ecore-con [ 35s] cycle: efl -> eina [ 35s] breaking dependency efl -> eina [ 35s] cycle: eo -> efl [ 35s] breaking dependency efl -> eo [ 35s] cycle: ecore-evas -> ecore-input-evas -> evas [ 35s] breaking dependency evas -> ecore-evas [ 35s] cycle: libsecurity-manager-client -> security-manager [ 35s] breaking dependency security-manager -> libsecurity-manager-client [ 35s] cycle: libsecurity-manager-client -> security-manager -> security-license-manager [ 35s] breaking dependency security-manager -> security-license-manager [ 35s] cycle: security-manager -> security-manager-policy [ 35s] breaking dependency security-manager -> security-manager-policy [ 35s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 35s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 35s] cycle: libxcrypt-devel -> glibc-devel [ 35s] breaking dependency glibc-devel -> libxcrypt-devel [ 35s] cycle: nss -> libsoftokn3 [ 35s] breaking dependency nss -> libsoftokn3 [ 35s] reordering done [ 36s] [1/250] installing boost-license-1.83.0-1.2 [ 36s] [2/250] installing default-ac-domains-0.1-1.2 [ 36s] [3/250] installing dlog-config-persistent-logs-9.0.1-1 [ 36s] [4/250] installing libmagic-data-5.45-1.9 [ 36s] [5/250] installing pcre2-syntax-10.40-1 [ 36s] [6/250] installing setup-0.9-1.4 [ 36s] [7/250] installing filesystem-3.1-1.2 [ 36s] [8/250] installing glibc-2.39-1.5 [ 37s] [9/250] installing libatomic-14.1.0-1.10 [ 37s] [10/250] installing libgcc-14.1.0-1.10 [ 38s] [11/250] installing libgomp-14.1.0-1.10 [ 38s] [12/250] installing libitm-14.1.0-1.10 [ 39s] [13/250] installing libgfortran-14.1.0-1.10 [ 39s] [14/250] installing libstdc++-14.1.0-1.10 [ 39s] [15/250] installing coreutils-6.9-14.4 [ 40s] [16/250] installing libstdc++-devel-14.1.0-1.10 [ 41s] [17/250] installing linux-glibc-devel-6.6-1.11 [ 42s] [18/250] installing libasan-14.1.0-1.10 [ 43s] [19/250] installing libcc1-14.1.0-1.10 [ 43s] [20/250] installing libubsan-14.1.0-1.10 [ 44s] [21/250] installing capi-base-common-0.4.82-1 [ 44s] [22/250] installing cpio-2.8-1.2 [ 44s] [23/250] installing findutils-4.3.8-1.9 [ 44s] [24/250] installing fribidi-1.0.10-1.2 [ 45s] [25/250] installing gdbm-1.8.3-1.11 [ 45s] [26/250] installing giflib-5.2.1-1.4 [ 46s] [27/250] installing hostname-3.23-1.2 [ 46s] [28/250] installing iniparser-4.1-1.2 [ 47s] [29/250] installing libattr-2.5.1-1.9 [ 47s] [30/250] installing libbz2-1.0.8-1.9 [ 48s] [31/250] installing libdrm-2.4.118-1.2 [ 48s] [32/250] installing libexpat-2.6.2-1.11 [ 49s] [33/250] installing libffi-3.4.2-1.11 [ 50s] [34/250] installing libhyphen-2.8.8-1 [ 50s] [35/250] installing libjpeg-8.2.2-1.3 [ 50s] [36/250] installing libjson-0.17-0 [ 51s] [37/250] installing libltdl-2.4.7-1.11 [ 51s] [38/250] installing liblua-5.1.5-1.9 [ 52s] [39/250] installing libpopt-1.16-1.9 [ 53s] [40/250] installing libsmack-1.3.1-1.9 [ 53s] [41/250] installing libsmartcols-2.39.3-1.7 [ 54s] [42/250] installing libuuid-2.39.3-1.7 [ 54s] [43/250] installing libwayland-egl-1.22.0-0 [ 55s] [44/250] installing libxcrypt-4.4.36-1.11 [ 56s] [45/250] installing libxkbcommon-1.6.0-0 [ 56s] [46/250] installing m4-1.4.19-1.2 [ 57s] [47/250] installing net-tools-2.0_20121208git-1.9 [ 57s] [48/250] installing nspr-4.35-1.9 [ 57s] [49/250] installing patch-2.7.6-1.9 [ 58s] [50/250] installing sed-4.1c-1.9 [ 58s] [51/250] installing which-2.17-1.2 [ 58s] [52/250] installing xdgmime-0.0.17-1.2 [ 59s] [53/250] installing zlib-1.3-1.11 [ 59s] [54/250] installing asan-runtime-env-14.1.0-1.5 [ 59s] [55/250] installing bash-3.2.57-2.1 [ 59s] [56/250] installing diffutils-3.10-1.2 [ 60s] [57/250] installing libblkid-2.39.3-1.7 [ 60s] [58/250] installing libcap-2.69-1.9 [ 61s] [59/250] installing libfreebl3-3.98-1.11 [ 61s] [60/250] installing liblzma-5.4.5-1.11 [ 62s] [61/250] installing libopenssl11-1.1.1w-1.11 [ 62s] [62/250] installing libopenssl3-3.0.13-1.11 [ 63s] [63/250] installing libpcre-8.45-1.9 [ 63s] [64/250] installing libsqlite-3.44.0-1.9 [ 64s] [65/250] installing libwebp-1.3.2-1.2 [ 64s] [66/250] installing libzstd1-1.5.5-1.9 [ 65s] [67/250] installing pixman-0.38.4-0 [ 65s] [68/250] installing pkg-config-0.29.2-1.9 [ 65s] [69/250] installing update-alternatives-1.22.2-1.2 [ 66s] [70/250] installing libnss-security-manager-1.9.6-0 [ 66s] [71/250] installing pcre2-10.40-1 [ 66s] [72/250] installing boost-atomic-1.83.0-1.2 [ 67s] [73/250] installing boost-program-options-1.83.0-1.2 [ 67s] [74/250] installing build-compare-2023.06.18-1.4 [ 68s] [75/250] installing hal-rootstrap-checker-0.1.0-1.2 [ 68s] [76/250] installing qemu-linux-user-x86_64-cross-5.2.0.2-20.4 [ 71s] [77/250] installing asan-build-env-14.1.0-1.5 [ 72s] libasan.so is already preloaded [ 72s] [78/250] installing cpp-14.1.0-1.10 [ 72s] [79/250] installing gcc-c++-14.1.0-1.10 [ 73s] [80/250] installing terminfo-base-full-6.4-1.11 [ 73s] [81/250] installing gawk-3.1.5-1.2 [ 73s] [82/250] installing glibc-locale-2.39-1.5 [ 74s] [83/250] installing grep-2.5.2-1.9 [ 74s] [84/250] installing libacl-2.3.2-1.9 [ 75s] [85/250] installing libelf-0.189-1.11 [ 75s] [86/250] installing libpng-1.6.40-0 [ 75s] [87/250] installing make-4.4-1.9 [ 76s] [88/250] installing minizip-1.3-1.11 [ 76s] [89/250] installing nss-certs-3.98-1.11 [ 76s] [90/250] installing smack-1.3.1-1.9 [ 76s] [91/250] installing binutils-libs-2.43-2.1 [ 77s] [92/250] installing bzip2-1.0.8-1.9 [ 77s] [93/250] installing gzip-1.13-1.5 [ 77s] [94/250] installing libcap-tools-2.69-1.9 [ 77s] [95/250] installing libglib-2.80.5-0 [ 77s] [96/250] installing libmagic-5.45-1.9 [ 77s] [97/250] installing libmount-2.39.3-1.7 [ 78s] [98/250] installing sqlite-3.44.0-1.9 [ 78s] [99/250] installing xz-5.4.5-1.11 [ 78s] [100/250] installing libfdisk-2.39.3-1.7 [ 78s] [101/250] installing libicu-74.1-1.4 [ 79s] [102/250] installing libkmod-31-1.2 [ 80s] [103/250] installing libxml2-2.12.5-1.10 [ 80s] [104/250] installing shadow-utils-4.1.4.2-7.4 [ 80s] [105/250] installing tzdata-2023c-1.2 [ 81s] [106/250] installing boost-filesystem-1.83.0-1.2 [ 81s] [107/250] installing dlog-9.0.1-1 [ 83s] [108/250] installing pam-1.1.6-1.9 [ 84s] [109/250] installing perl-5.38.0-1.8 [ 85s] [110/250] installing cynara-db-migration-0.19.0-1 [ 85s] [111/250] installing libtiff-4.6.0-1.2 [ 85s] [112/250] installing ttrace-1.1.0-1 [ 85s] [113/250] installing gcc-14.1.0-1.10 [ 86s] [114/250] installing build-mkbaselibs-20120927-1.2 [ 86s] [115/250] installing qemu-accel-x86_64-riscv64-0.4-1.3 [ 107s] [116/250] installing acl-2.3.2-1.9 [ 108s] [117/250] installing autoconf-2.71-1.12 [ 109s] [118/250] installing dlog-logger-9.0.1-1 [ 109s] [119/250] installing file-5.45-1.9 [ 110s] [120/250] installing libgmodule-2.80.5-0 [ 110s] [121/250] installing tizen-platform-config-5.0-1 [ 131s] [122/250] installing binutils-2.43-2.1 [ 132s] [123/250] installing tar-1.17-1.2 [ 132s] [124/250] installing glibc-devel-2.39-1.5 [ 132s] [125/250] installing libfreetype-2.13.2-1 [ 132s] [126/250] installing libgobject-2.80.5-0 [ 132s] [127/250] installing libncurses6-6.4-1.11 [ 132s] [128/250] installing security-config-1.0-1 [ 171s] groupadd: group 'dbus' already exists [ 171s] groupadd: group 'priv_appdebugging' already exists [ 171s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 171s] cat: /etc/tizen-build.conf: No such file or directory [ 171s] [129/250] installing thorvg-0.8.16-1 [ 171s] [130/250] installing libdw-0.189-1.11 [ 171s] [131/250] installing libsystemd-255-0 [ 172s] [132/250] installing nss-3.98-1.11 [ 172s] [133/250] installing shared-mime-info-1.7-0 [ 180s] [134/250] installing libarchive-3.7.2-1.10 [ 180s] [135/250] installing libncurses-6.4-1.11 [ 180s] [136/250] installing automake-1.16.5-1.12 [ 180s] [137/250] installing dbus-libs-1.12.20-3 [ 181s] [138/250] installing less-643-1.2 [ 181s] [139/250] installing libtzplatform-config-5.0-1 [ 181s] [140/250] installing libxcrypt-devel-4.4.36-1.11 [ 181s] [141/250] installing libasm-0.189-1.11 [ 181s] [142/250] installing libreadline-5.2-1.9 [ 181s] [143/250] installing build-20120927-1.2 [ 181s] [144/250] installing libdlog-9.0.1-1 [ 181s] [145/250] installing libharfbuzz-8.2.2-0 [ 182s] [146/250] installing libsoftokn3-3.98-1.11 [ 182s] [147/250] installing fontconfig-2.14.2-1 [ 188s] [148/250] installing libgio-2.80.5-0 [ 189s] [149/250] installing rpm-4.14.1.1-1.11 [ 189s] [150/250] installing gio-branding-upstream-2.80.5-0 [ 190s] [151/250] installing capi-system-resource-1.0.0-0 [ 190s] [152/250] installing libwayland-egl-tizen-1.0.1-0 [ 190s] [153/250] installing tizen-platform-config-tools-5.0-1 [ 191s] [154/250] installing libwayland-client-1.22.0-0 [ 191s] [155/250] installing libwayland-server-1.22.0-0 [ 191s] [156/250] installing asan-force-options-14.1.0-1.5 [ 206s] [157/250] installing libjson-glib-1.8.0-0 [ 206s] [158/250] installing libtool-2.4.7-1.11 [ 206s] [159/250] installing lottie-player-0.2.0-1 [ 206s] [160/250] installing parcel-0.17.1-0 [ 206s] [161/250] installing elfutils-0.189-1.11 [ 206s] [162/250] installing hal-api-common-0.0.1-1 [ 207s] [163/250] installing libcynara-commons-0.19.0-1 [ 210s] [164/250] installing sessiond-0.7.7.2-1 [ 210s] /var/tmp/rpm-tmp.1UVeFW: line 1: systemctl: command not found [ 210s] /var/tmp/rpm-tmp.1UVeFW: line 2: systemctl: command not found [ 210s] warning: %post(sessiond-0.7.7.2-1.riscv64) scriptlet failed, exit status 127 [ 210s] [165/250] installing capi-system-info-0.5.2-1 [ 211s] Running capi-system-info %posttrans script [ 211s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 211s] iniparser: cannot open /etc/info.ini [ 211s] [166/250] installing util-linux-2.39.3-1.7 [ 212s] [167/250] installing systemd-255-0 [ 229s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 229s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 229s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 229s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 229s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 229s] [168/250] installing rpm-build-4.14.1.1-1.11 [ 229s] [169/250] installing libwayland-extension-client-1.3.60-0 [ 229s] [170/250] installing pkgmgr-0.20.20-0 [ 232s] Running pkgmgr %posttrans script [ 232s] /var/tmp/rpm-tmp.co2lAo: line 5: pkg_initdb: command not found [ 232s] /var/tmp/rpm-tmp.co2lAo: line 6: install_preload_pkg: command not found [ 232s] /var/tmp/rpm-tmp.co2lAo: line 13: pkgcmd: command not found [ 232s] /var/tmp/rpm-tmp.co2lAo: line 15: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 232s] [171/250] installing libwayland-cursor-1.22.0-0 [ 232s] [172/250] installing util-linux-su-2.39.3-1.7 [ 232s] [173/250] installing hal-api-tbm-0.1.0-1 [ 232s] [174/250] installing libcynara-agent-0.19.0-1 [ 233s] [175/250] installing libcynara-client-0.19.0-1 [ 233s] [176/250] installing libcynara-creds-commons-0.19.0-1 [ 233s] [177/250] installing libcynara-session-0.19.0-1 [ 233s] [178/250] installing libcynara-admin-0.19.0-1 [ 233s] [179/250] installing hal-api-sensor-0.0.1-1 [ 233s] [180/250] installing libsessiond-0.7.7.2-1 [ 234s] [181/250] installing tizen-core-0.1.22-0 [ 234s] [182/250] installing bundle-0.17.1-0 [ 234s] [183/250] installing cynara-0.19.0-1 [ 235s] Running in chroot, ignoring command 'daemon-reload' [ 235s] Running in chroot, ignoring command 'restart' [ 235s] [184/250] installing libsyscommon-5.0.0-0 [ 235s] [185/250] installing libcynara-creds-socket-0.19.0-1 [ 235s] [186/250] installing cyad-0.19.0-1 [ 235s] [187/250] installing efl-1.25.1-0 [ 235s] [188/250] installing libtbm-4.5.3-1 [ 237s] [189/250] installing buxton2-1.8.9-0 [ 242s] Running buxton2 %posttrans script [ 242s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 242s] /etc/buxton2/*: No such file or directory [ 242s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 242s] /var/lib/buxton2/*: No such file or directory [ 242s] [190/250] installing eina-1.25.1-0 [ 242s] [191/250] installing libwayland-tbm-client-0.8.14-0 [ 242s] [192/250] installing hal-api-tdm-0.2.0-1 [ 243s] [193/250] installing libwayland-tbm-server-0.8.14-0 [ 243s] [194/250] installing vconf-compat-1.8.9-0 [ 243s] [195/250] installing embryo-1.25.1-0 [ 243s] [196/250] installing eo-1.25.1-0 [ 243s] [197/250] installing emile-1.25.1-0 [ 244s] [198/250] installing libstorage-1.0.0-0 [ 244s] [199/250] installing libtdm-3.1.16-0 [ 245s] [200/250] installing sensord-4.0.54-1 [ 246s] /usr/lib64 / [ 246s] / [ 246s] [201/250] installing pkgmgr-info-0.27.0-1 [ 246s] [202/250] installing ector-1.25.1-0 [ 246s] [203/250] installing pkgmgr-info-parser-0.27.0-1 [ 247s] [204/250] installing eet-1.25.1-0 [ 247s] [205/250] installing libtdm-client-3.1.16-0 [ 247s] [206/250] installing ecore-core-1.25.1-0 [ 247s] [207/250] installing security-privilege-manager-1.3.1-0 [ 250s] mdm blacklist exist [ 250s] Check inserted data [ 250s] DPM blacklist... [ 250s] [ 250s] MDM blacklist... [ 250s] [208/250] installing aul-0.64.10-1 [ 253s] [209/250] installing ecore-imf-1.25.1-0 [ 253s] [210/250] installing ecore-audio-1.25.1-0 [ 253s] [211/250] installing eldbus-1.25.1-0 [ 253s] [212/250] installing capi-appfw-preference-0.6.22-0 [ 253s] [213/250] installing aul-rsc-mgr-0.64.10-1 [ 254s] [214/250] installing ecore-con-1.25.1-0 [ 254s] [215/250] installing app-core-common-1.25.7-0 [ 254s] [216/250] installing libtpl-egl-1.11.9-0 [ 254s] [217/250] installing rpc-port-1.18.10-0 [ 254s] [218/250] installing security-manager-1.9.6-0 [ 257s] Running in chroot, ignoring command 'daemon-reload' [ 257s] Running in chroot, ignoring command 'start' [ 257s] [219/250] installing coregl-0.2.0-0 [ 258s] [220/250] installing ecore-file-1.25.1-0 [ 258s] [221/250] installing security-manager-policy-1.9.6-0 [ 294s] Running in chroot, ignoring command 'stop' [ 294s] Running in chroot, ignoring command 'start' [ 294s] [222/250] installing ecore-ipc-1.25.1-0 [ 294s] [223/250] installing libsecurity-manager-client-1.9.6-0 [ 294s] [224/250] installing capi-appfw-app-common-0.12.3-0 [ 294s] [225/250] installing capi-appfw-app-control-0.23.0-0 [ 294s] [226/250] installing pkgmgr-client-0.20.20-0 [ 294s] [227/250] installing capi-appfw-app-manager-0.13.7-1 [ 295s] [228/250] installing eeze-1.25.1-0 [ 295s] [229/250] installing capi-appfw-package-manager-0.11.3-1 [ 295s] [230/250] installing efreet-1.25.1-0 [ 295s] [231/250] installing appcore-agent-1.4.2-1 [ 296s] [232/250] installing security-license-manager-1.9.6-0 [ 297s] Running in chroot, ignoring command 'daemon-reload' [ 297s] Running in chroot, ignoring command 'start' [ 297s] [233/250] installing ecore-input-1.25.1-0 [ 297s] [234/250] installing eio-1.25.1-0 [ 297s] [235/250] installing notification-0.7.19-1 [ 297s] [236/250] installing ecore-fb-1.25.1-0 [ 297s] [237/250] installing ecore-wl2-1.25.1-0 [ 297s] [238/250] installing evas-1.25.1-0 [ 298s] [239/250] installing ecore-imf-evas-1.25.1-0 [ 298s] [240/250] installing ecore-input-evas-1.25.1-0 [ 298s] [241/250] installing ecore-evas-1.25.1-0 [ 298s] [242/250] installing edje-1.25.1-0 [ 298s] [243/250] installing emotion-1.25.1-0 [ 298s] [244/250] installing ethumb-1.25.1-0 [ 298s] [245/250] installing elementary-1.25.1-0 [ 299s] [246/250] installing capi-ui-efl-util-0.7.32-1 [ 299s] [247/250] installing efl-extension-0.1.8-1 [ 299s] [248/250] installing isf-9.0.14-1 [ 299s] [249/250] installing isf-devel-9.0.14-1 [ 300s] [250/250] installing org.tizen.isf-kbd-mode-changer-9.0.14-1 [ 300s] removing nis flags from /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.11/etc/nsswitch.conf... [ 300s] now finalizing build dir... [ 302s] ----------------------------------------------------------------- [ 302s] ----- building ise-engine-default.spec (user abuild) [ 302s] ----------------------------------------------------------------- [ 302s] ----------------------------------------------------------------- [ 304s] + exec rpmbuild --define 'jobs 8' --define '_smp_mflags -j8' --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' -bb /home/abuild/rpmbuild/SOURCES/ise-engine-default.spec [ 304s] Building target platforms: riscv64-tizen-linux [ 304s] Building for target riscv64-tizen-linux [ 304s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.faTehi [ 304s] + umask 022 [ 304s] + cd /home/abuild/rpmbuild/BUILD [ 304s] + cd /home/abuild/rpmbuild/BUILD [ 304s] + rm -rf ise-engine-default-1.0.11 [ 304s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-default-1.0.11.tar.gz [ 304s] + /bin/tar -xof - [ 304s] + STATUS=0 [ 304s] + '[' 0 -ne 0 ']' [ 304s] + cd ise-engine-default-1.0.11 [ 304s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 304s] + exit 0 [ 304s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.t15GWL [ 304s] + umask 022 [ 304s] + cd /home/abuild/rpmbuild/BUILD [ 304s] + cd ise-engine-default-1.0.11 [ 304s] + ref=/usr/lib/rpm [ 304s] + mints=0 [ 304s] + case $(uname -m) in [ 304s] ++ uname -m [ 305s] + mints=20160911 [ 305s] + for s in guess sub [ 305s] ++ find -maxdepth 8 -name config.guess [ 305s] + for s in guess sub [ 305s] ++ find -maxdepth 8 -name config.sub [ 305s] + LANG=C [ 305s] + export LANG [ 305s] + unset DISPLAY [ 305s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 305s] + export CFLAGS [ 305s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 305s] + export CXXFLAGS [ 305s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 305s] + export FFLAGS [ 305s] + LDFLAGS= [ 305s] + export LDFLAGS [ 305s] + export 'CFLAGS+= -Werror -fvisibility=hidden' [ 305s] + CFLAGS+=' -Werror -fvisibility=hidden' [ 305s] + export 'CXXFLAGS+= -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 305s] + CXXFLAGS+=' -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 305s] + AR=gcc-ar [ 305s] + export AR [ 305s] + NM=/bin/nm [ 305s] + export NM [ 305s] + RANLIB=gcc-ranlib [ 305s] + export RANLIB [ 305s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden' [ 305s] + export CFLAGS [ 305s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 305s] + export CXXFLAGS [ 305s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 305s] + export FFLAGS [ 305s] + ./autogen.sh --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 305s] + libtoolize --force [ 306s] libtoolize: putting auxiliary files in '.'. [ 306s] libtoolize: linking file './compile' [ 306s] libtoolize: linking file './config.guess' [ 306s] libtoolize: linking file './config.sub' [ 307s] libtoolize: linking file './depcomp' [ 307s] libtoolize: linking file './install-sh' [ 307s] libtoolize: linking file './missing' [ 308s] libtoolize: linking file './ltmain.sh' [ 308s] libtoolize: putting macros in 'm4'. [ 308s] libtoolize: linking file 'm4/libtool.m4' [ 308s] libtoolize: linking file 'm4/ltargz.m4' [ 309s] libtoolize: linking file 'm4/ltdl.m4' [ 309s] libtoolize: linking file 'm4/ltoptions.m4' [ 309s] libtoolize: linking file 'm4/ltsugar.m4' [ 310s] libtoolize: linking file 'm4/ltversion.m4' [ 310s] libtoolize: linking file 'm4/lt~obsolete.m4' [ 311s] libtoolize: putting libltdl files in 'libltdl'. [ 311s] libtoolize: linking file 'libltdl/COPYING.LIB' [ 311s] libtoolize: creating file 'libltdl/Makefile.am' [ 311s] libtoolize: linking file 'libltdl/README' [ 312s] libtoolize: creating file 'libltdl/configure.ac' [ 312s] libtoolize: copying file 'libltdl/aclocal.m4' [ 312s] libtoolize: creating file 'libltdl/Makefile.in' [ 312s] libtoolize: linking file 'libltdl/config-h.in' [ 312s] libtoolize: creating file 'libltdl/configure' [ 313s] libtoolize: linking file 'libltdl/libltdl/lt__alloc.h' [ 313s] libtoolize: linking file 'libltdl/libltdl/lt__argz_.h' [ 313s] libtoolize: linking file 'libltdl/libltdl/lt__dirent.h' [ 314s] libtoolize: linking file 'libltdl/libltdl/lt__glibc.h' [ 314s] libtoolize: linking file 'libltdl/libltdl/lt__private.h' [ 314s] libtoolize: linking file 'libltdl/libltdl/lt__strl.h' [ 315s] libtoolize: linking file 'libltdl/libltdl/lt_dlloader.h' [ 315s] libtoolize: linking file 'libltdl/libltdl/lt_error.h' [ 315s] libtoolize: linking file 'libltdl/libltdl/lt_system.h' [ 316s] libtoolize: linking file 'libltdl/libltdl/slist.h' [ 316s] libtoolize: linking file 'libltdl/loaders/dld_link.c' [ 316s] libtoolize: linking file 'libltdl/loaders/dlopen.c' [ 317s] libtoolize: linking file 'libltdl/loaders/dyld.c' [ 317s] libtoolize: linking file 'libltdl/loaders/load_add_on.c' [ 317s] libtoolize: linking file 'libltdl/loaders/loadlibrary.c' [ 318s] libtoolize: linking file 'libltdl/loaders/preopen.c' [ 318s] libtoolize: linking file 'libltdl/loaders/shl_load.c' [ 318s] libtoolize: linking file 'libltdl/lt__alloc.c' [ 319s] libtoolize: linking file 'libltdl/lt__argz.c' [ 319s] libtoolize: linking file 'libltdl/lt__dirent.c' [ 319s] libtoolize: linking file 'libltdl/lt__strl.c' [ 320s] libtoolize: linking file 'libltdl/lt_dlloader.c' [ 320s] libtoolize: linking file 'libltdl/lt_error.c' [ 320s] libtoolize: linking file 'libltdl/ltdl.c' [ 321s] libtoolize: linking file 'libltdl/ltdl.h' [ 321s] libtoolize: linking file 'libltdl/slist.c' [ 321s] libtoolize: Remember to add 'LT_CONFIG_LTDL_DIR([libltdl])' to 'configure.ac'. [ 321s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 321s] libtoolize: and rerunning libtoolize and aclocal. [ 321s] + aclocal -I ./m4 [ 328s] + autoheader [ 332s] + libtoolize -c --automake [ 333s] libtoolize: error: './compile' exists: use '--force' to overwrite [ 333s] libtoolize: error: './depcomp' exists: use '--force' to overwrite [ 334s] libtoolize: error: './missing' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/COPYING.LIB' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/Makefile.am' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/README' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/configure.ac' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/aclocal.m4' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/Makefile.in' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/config-h.in' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/configure' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt__alloc.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt__argz_.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt__dirent.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt__glibc.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt__private.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt__strl.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt_dlloader.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt_error.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/lt_system.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/libltdl/slist.h' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/loaders/dld_link.c' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/loaders/dlopen.c' exists: use '--force' to overwrite [ 335s] libtoolize: error: 'libltdl/loaders/dyld.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/loaders/load_add_on.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/loaders/loadlibrary.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/loaders/preopen.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/loaders/shl_load.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/lt__alloc.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/lt__argz.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/lt__dirent.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/lt__strl.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/lt_dlloader.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/lt_error.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/ltdl.c' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/ltdl.h' exists: use '--force' to overwrite [ 336s] libtoolize: error: 'libltdl/slist.c' exists: use '--force' to overwrite [ 336s] + automake --add-missing --copy --include-deps [ 342s] Makefile.am: installing './INSTALL' [ 342s] Makefile.am: installing './COPYING' using GNU General Public License v3 file [ 342s] Makefile.am: Consider adding the COPYING file to the version control system [ 342s] Makefile.am: for your code, to avoid questions about which license your project uses [ 343s] + autoconf [ 347s] configure.ac:22: warning: 'AM_CONFIG_HEADER': this macro is obsolete. [ 347s] configure.ac:22: You should use the 'AC_CONFIG_HEADERS' macro instead. [ 347s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 347s] aclocal.m4:1021: AM_CONFIG_HEADER is expanded from... [ 347s] configure.ac:22: the top level [ 347s] configure.ac:29: warning: The macro `AC_LIBTOOL_DLOPEN' is obsolete. [ 347s] configure.ac:29: You should run autoupdate. [ 347s] m4/ltoptions.m4:113: AC_LIBTOOL_DLOPEN is expanded from... [ 347s] configure.ac:29: the top level [ 347s] configure.ac:29: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you [ 347s] configure.ac:29: put the 'dlopen' option into LT_INIT's first parameter. [ 347s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 347s] m4/ltoptions.m4:113: AC_LIBTOOL_DLOPEN is expanded from... [ 347s] configure.ac:29: the top level [ 347s] configure.ac:31: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 347s] configure.ac:31: You should run autoupdate. [ 347s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 347s] configure.ac:31: the top level [ 347s] configure.ac:32: warning: The macro `AC_LIB_LTDL' is obsolete. [ 347s] configure.ac:32: You should run autoupdate. [ 347s] m4/ltdl.m4:353: AC_LIB_LTDL is expanded from... [ 347s] configure.ac:32: the top level [ 347s] configure.ac:55: warning: The macro `AC_HEADER_STDC' is obsolete. [ 347s] configure.ac:55: You should run autoupdate. [ 347s] ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... [ 347s] configure.ac:55: the top level [ 350s] + [[ -e config.sub ]] [ 350s] ++ automake --print-libdir [ 352s] + install -m 0755 /usr/share/automake-1.16/config.sub config.sub [ 352s] + AR=gcc-ar [ 352s] + export AR [ 352s] + NM=/bin/nm [ 352s] + export NM [ 352s] + RANLIB=gcc-ranlib [ 352s] + export RANLIB [ 352s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden' [ 352s] + export CFLAGS [ 352s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 352s] + export CXXFLAGS [ 352s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 352s] + export FFLAGS [ 352s] + ./configure --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 357s] checking for a BSD-compatible install... /bin/install -c [ 357s] checking whether build environment is sane... yes [ 357s] checking for a race-free mkdir -p... /bin/mkdir -p [ 357s] checking for gawk... gawk [ 357s] checking whether make sets $(MAKE)... yes [ 358s] checking whether make supports nested variables... yes [ 358s] ./configure: line 3737: PLATFORM_INIT: command not found [ 358s] checking build system type... riscv64-tizen-linux-gnu [ 358s] checking host system type... riscv64-tizen-linux-gnu [ 358s] checking how to print strings... printf [ 358s] checking whether make supports the include directive... yes (GNU style) [ 358s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 358s] checking whether the C compiler works... yes [ 358s] checking for C compiler default output file name... a.out [ 358s] checking for suffix of executables... [ 359s] checking whether we are cross compiling... no [ 359s] checking for suffix of object files... o [ 359s] checking whether the compiler supports GNU C... yes [ 359s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 359s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 359s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 360s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 360s] checking for a sed that does not truncate output... /bin/sed [ 360s] checking for grep that handles long lines and -e... /bin/grep [ 360s] checking for egrep... /bin/grep -E [ 360s] checking for fgrep... /bin/grep -F [ 360s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 360s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 360s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 360s] checking the name lister (/bin/nm) interface... BSD nm [ 360s] checking whether ln -s works... yes [ 360s] checking the maximum length of command line arguments... 1572864 [ 361s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 361s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 361s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 361s] checking for riscv64-tizen-linux-gnu-file... no [ 361s] checking for file... file [ 361s] checking for riscv64-tizen-linux-gnu-objdump... no [ 361s] checking for objdump... objdump [ 361s] checking how to recognize dependent libraries... pass_all [ 361s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 361s] checking for dlltool... no [ 361s] checking how to associate runtime and link libraries... printf %s\n [ 361s] checking for riscv64-tizen-linux-gnu-ar... gcc-ar [ 361s] checking for archiver @FILE support... @ [ 361s] checking for riscv64-tizen-linux-gnu-strip... no [ 361s] checking for strip... strip [ 361s] checking for riscv64-tizen-linux-gnu-ranlib... gcc-ranlib [ 361s] checking command to parse /bin/nm output from riscv64-tizen-linux-gnu-gcc object... ok [ 361s] checking for sysroot... no [ 362s] checking for a working dd... /bin/dd [ 363s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 363s] checking for riscv64-tizen-linux-gnu-mt... no [ 363s] checking for mt... no [ 363s] checking if : is a manifest tool... no [ 363s] checking for stdio.h... yes [ 363s] checking for stdlib.h... yes [ 363s] checking for string.h... yes [ 363s] checking for inttypes.h... yes [ 363s] checking for stdint.h... yes [ 363s] checking for strings.h... yes [ 363s] checking for sys/stat.h... yes [ 363s] checking for sys/types.h... yes [ 363s] checking for unistd.h... yes [ 363s] checking for dlfcn.h... yes [ 363s] checking for objdir... .libs [ 364s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 364s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 364s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 364s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 364s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 364s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 364s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 364s] checking whether -lc should be explicitly linked in... no [ 365s] checking dynamic linker characteristics... GNU/Linux ld.so [ 365s] checking how to hardcode library paths into programs... immediate [ 366s] checking for shl_load... no [ 366s] checking for shl_load in -ldld... no [ 366s] checking for dlopen... yes [ 366s] checking whether a program can dlopen itself... yes [ 367s] checking whether a statically linked program can dlopen itself... yes [ 367s] checking whether stripping libraries is possible... yes [ 367s] checking if libtool supports shared libraries... yes [ 367s] checking whether to build shared libraries... yes [ 367s] checking whether to build static libraries... no [ 367s] checking for riscv64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 367s] checking what extension is used for runtime loadable modules... .so [ 367s] checking what variable specifies run-time module search path... LD_LIBRARY_PATH [ 367s] checking for the default library search path... /lib /usr/lib /usr/local/lib64 /usr/local/lib /usr/lib/hal /usr/lib64/hal /emul/lib [ 367s] checking for library containing dlopen... none required [ 367s] checking for dlerror... yes [ 367s] checking for shl_load... (cached) no [ 367s] checking for shl_load in -ldld... (cached) no [ 367s] checking for dld_link in -ldld... no [ 367s] checking for _ prefix in compiled symbols... no [ 367s] checking whether deplibs are loaded by dlopen... yes [ 367s] checking for argz.h... yes [ 368s] checking for error_t... yes [ 368s] checking for argz_add... yes [ 368s] checking for argz_append... yes [ 368s] checking for argz_count... yes [ 368s] checking for argz_create_sep... yes [ 368s] checking for argz_insert... yes [ 369s] checking for argz_next... yes [ 369s] checking for argz_stringify... yes [ 369s] checking if argz actually works... yes [ 369s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 369s] checking for ltdl.h... yes [ 369s] checking whether lt_dlinterface_register is declared... yes [ 369s] checking for lt_dladvise_preload in -lltdl... yes [ 369s] checking where to find libltdl headers... [ 369s] checking where to find libltdl library... -lltdl [ 369s] checking for unistd.h... (cached) yes [ 369s] checking for dl.h... no [ 369s] checking for sys/dl.h... no [ 369s] checking for dld.h... no [ 370s] checking for mach-o/dyld.h... no [ 370s] checking for dirent.h... yes [ 370s] checking for closedir... yes [ 370s] checking for opendir... yes [ 370s] checking for readdir... yes [ 370s] checking for strlcat... yes [ 371s] checking for strlcpy... yes [ 371s] checking for riscv64-tizen-linux-gnu-g++... riscv64-tizen-linux-gnu-g++ [ 371s] checking whether the compiler supports GNU C++... yes [ 371s] checking whether riscv64-tizen-linux-gnu-g++ accepts -g... yes [ 371s] checking for riscv64-tizen-linux-gnu-g++ option to enable C++11 features... none needed [ 371s] checking dependency style of riscv64-tizen-linux-gnu-g++... gcc3 [ 372s] checking how to run the C++ preprocessor... riscv64-tizen-linux-gnu-g++ -E [ 372s] checking for ld used by riscv64-tizen-linux-gnu-g++... /usr/riscv64-tizen-linux-gnu/bin/ld [ 372s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 372s] checking whether the riscv64-tizen-linux-gnu-g++ linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 372s] checking for riscv64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 372s] checking if riscv64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 372s] checking if riscv64-tizen-linux-gnu-g++ static flag -static works... no [ 373s] checking if riscv64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 373s] checking if riscv64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 373s] checking whether the riscv64-tizen-linux-gnu-g++ linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 373s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 373s] checking how to hardcode library paths into programs... immediate [ 373s] checking for riscv64-tizen-linux-gnu-gcc... (cached) riscv64-tizen-linux-gnu-gcc [ 373s] checking whether the compiler supports GNU C... (cached) yes [ 373s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 373s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... (cached) none needed [ 373s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 373s] checking dependency style of riscv64-tizen-linux-gnu-gcc... (cached) gcc3 [ 373s] checking for an ANSI C-conforming const... yes [ 374s] checking for size_t... yes [ 374s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 374s] checking pkg-config is at least version 0.9.0... yes [ 376s] checking for isf >= 1.0.0... yes [ 376s] checking for egrep... (cached) /bin/grep -E [ 378s] checking that generated files are newer than configure... done [ 378s] configure: creating ./config.status [ 383s] config.status: creating Makefile [ 384s] config.status: creating src/Makefile [ 384s] config.status: creating data/Makefile [ 384s] config.status: creating config.h [ 385s] config.status: executing depfiles commands [ 386s] config.status: executing libtool commands [ 387s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/libltdl) [ 387s] configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--build=riscv64-tizen-linux-gnu' '--host=riscv64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=riscv64-tizen-linux-gnu' 'host_alias=riscv64-tizen-linux-gnu' 'CFLAGS=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden' 'LDFLAGS=' 'CXXFLAGS=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden' 'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig' --cache-file=/dev/null --srcdir=. [ 392s] checking for a BSD-compatible install... /bin/install -c [ 392s] checking whether build environment is sane... yes [ 392s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 392s] checking for gawk... gawk [ 392s] checking whether make sets $(MAKE)... yes [ 393s] checking whether make supports nested variables... yes [ 393s] checking whether make supports nested variables... (cached) yes [ 393s] checking build system type... riscv64-tizen-linux-gnu [ 393s] checking host system type... riscv64-tizen-linux-gnu [ 393s] checking how to print strings... printf [ 393s] checking whether make supports the include directive... yes (GNU style) [ 393s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 393s] checking whether the C compiler works... yes [ 393s] checking for C compiler default output file name... a.out [ 393s] checking for suffix of executables... [ 394s] checking whether we are cross compiling... no [ 394s] checking for suffix of object files... o [ 394s] checking whether we are using the GNU C compiler... yes [ 394s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 394s] checking for riscv64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 394s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 394s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 395s] checking for a sed that does not truncate output... /bin/sed [ 395s] checking for grep that handles long lines and -e... /bin/grep [ 395s] checking for egrep... /bin/grep -E [ 395s] checking for fgrep... /bin/grep -F [ 395s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 395s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 395s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 395s] checking the name lister (/bin/nm) interface... BSD nm [ 395s] checking whether ln -s works... yes [ 395s] checking the maximum length of command line arguments... 1572864 [ 395s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 395s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 395s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 395s] checking for riscv64-tizen-linux-gnu-file... no [ 395s] checking for file... file [ 395s] checking for riscv64-tizen-linux-gnu-objdump... no [ 395s] checking for objdump... objdump [ 395s] checking how to recognize dependent libraries... pass_all [ 395s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 395s] checking for dlltool... no [ 395s] checking how to associate runtime and link libraries... printf %s\n [ 395s] checking for riscv64-tizen-linux-gnu-ar... gcc-ar [ 395s] checking for archiver @FILE support... @ [ 395s] checking for riscv64-tizen-linux-gnu-strip... no [ 395s] checking for strip... strip [ 395s] checking for riscv64-tizen-linux-gnu-ranlib... gcc-ranlib [ 396s] checking command to parse /bin/nm output from riscv64-tizen-linux-gnu-gcc object... ok [ 396s] checking for sysroot... no [ 397s] checking for a working dd... /bin/dd [ 397s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 397s] checking for riscv64-tizen-linux-gnu-mt... no [ 397s] checking for mt... no [ 397s] checking if : is a manifest tool... no [ 398s] checking how to run the C preprocessor... riscv64-tizen-linux-gnu-gcc -E [ 398s] checking for ANSI C header files... yes [ 398s] checking for sys/types.h... yes [ 398s] checking for sys/stat.h... yes [ 399s] checking for stdlib.h... yes [ 399s] checking for string.h... yes [ 399s] checking for memory.h... yes [ 399s] checking for strings.h... yes [ 399s] checking for inttypes.h... yes [ 399s] checking for stdint.h... yes [ 399s] checking for unistd.h... yes [ 399s] checking for dlfcn.h... yes [ 399s] checking for objdir... .libs [ 400s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 400s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 400s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 400s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 400s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 400s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 400s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 400s] checking whether -lc should be explicitly linked in... no [ 401s] checking dynamic linker characteristics... GNU/Linux ld.so [ 401s] checking how to hardcode library paths into programs... immediate [ 401s] checking for shl_load... no [ 402s] checking for shl_load in -ldld... no [ 402s] checking for dlopen... yes [ 402s] checking whether a program can dlopen itself... yes [ 403s] checking whether a statically linked program can dlopen itself... yes [ 403s] checking whether stripping libraries is possible... yes [ 403s] checking if libtool supports shared libraries... yes [ 403s] checking whether to build shared libraries... yes [ 403s] checking whether to build static libraries... no [ 403s] checking what extension is used for runtime loadable modules... .so [ 403s] checking what variable specifies run-time module search path... LD_LIBRARY_PATH [ 403s] checking for the default library search path... /lib /usr/lib /usr/local/lib64 /usr/local/lib /usr/lib/hal /usr/lib64/hal /emul/lib [ 403s] checking for library containing dlopen... none required [ 403s] checking for dlerror... yes [ 403s] checking for shl_load... (cached) no [ 403s] checking for shl_load in -ldld... (cached) no [ 403s] checking for dld_link in -ldld... no [ 403s] checking for _ prefix in compiled symbols... no [ 403s] checking whether deplibs are loaded by dlopen... yes [ 403s] checking for argz.h... yes [ 403s] checking for error_t... yes [ 403s] checking for argz_add... yes [ 404s] checking for argz_append... yes [ 404s] checking for argz_count... yes [ 404s] checking for argz_create_sep... yes [ 404s] checking for argz_insert... yes [ 404s] checking for argz_next... yes [ 405s] checking for argz_stringify... yes [ 405s] checking if argz actually works... yes [ 405s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 405s] checking for unistd.h... (cached) yes [ 405s] checking for dl.h... no [ 405s] checking for sys/dl.h... no [ 405s] checking for dld.h... no [ 405s] checking for mach-o/dyld.h... no [ 405s] checking for dirent.h... yes [ 405s] checking for closedir... yes [ 405s] checking for opendir... yes [ 406s] checking for readdir... yes [ 406s] checking for strlcat... yes [ 406s] checking for strlcpy... yes [ 406s] checking that generated files are newer than configure... done [ 406s] configure: creating ./config.status [ 411s] config.status: creating Makefile [ 411s] config.status: creating config.h [ 412s] config.status: executing depfiles commands [ 413s] config.status: executing libtool commands [ 415s] + make -j8 [ 415s] make all-recursive [ 415s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 415s] Making all in src [ 415s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 415s] /bin/sh ../libtool --tag=CXX --mode=compile riscv64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c -o ise_engine_default_la-isf_default_imengine.lo `test -f 'isf_default_imengine.cpp' || echo './'`isf_default_imengine.cpp [ 415s] libtool: compile: riscv64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c isf_default_imengine.cpp -fPIC -DPIC -o .libs/ise_engine_default_la-isf_default_imengine.o [ 417s] mv -f .deps/ise_engine_default_la-isf_default_imengine.Tpo .deps/ise_engine_default_la-isf_default_imengine.Plo [ 417s] /bin/sh ../libtool --tag=CXX --mode=link riscv64-tizen-linux-gnu-g++ -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden -avoid-version -rpath /usr/lib64/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim_imengine -lscim-1.0 -lisf-control -o ise-engine-default.la -rpath /usr/lib64/scim-1.0/1.4.0/IMEngine ise_engine_default_la-isf_default_imengine.lo [ 417s] libtool: link: /bin/nm .libs/ise_engine_default_la-isf_default_imengine.o | /bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed '/ __gnu_lto/d' | /bin/sed 's/.* //' | sort | uniq > .libs/ise-engine-default.exp [ 418s] libtool: link: /bin/grep -E -e "^[^_].*" ".libs/ise-engine-default.exp" > ".libs/ise-engine-default.expT" [ 418s] libtool: link: mv -f ".libs/ise-engine-default.expT" ".libs/ise-engine-default.exp" [ 418s] libtool: link: riscv64-tizen-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0/crti.o /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0/crtbeginS.o .libs/ise_engine_default_la-isf_default_imengine.o -lscim_imengine -lscim-1.0 -lisf-control -L/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0 -L/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0/../../../../riscv64-tizen-linux-gnu/lib -L/lib64 -L/usr/lib64 -lstdc++ -lm -lc -lgcc_s /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0/crtendS.o /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.1.0/crtn.o -O2 -g2 -gdwarf-4 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,--as-needed -mabi=lp64d -march=rv64gc -g -Wl,-soname -Wl,ise-engine-default.so -Wl,-retain-symbols-file -Wl,.libs/ise-engine-default.exp -o .libs/ise-engine-default.so [ 418s] libtool: link: ( cd ".libs" && rm -f "ise-engine-default.la" && ln -s "../ise-engine-default.la" "ise-engine-default.la" ) [ 418s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 418s] Making all in data [ 418s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 418s] make[2]: Nothing to be done for 'all'. [ 418s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 418s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 418s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 418s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 418s] + exit 0 [ 418s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IJZNA9 [ 418s] + umask 022 [ 418s] + cd /home/abuild/rpmbuild/BUILD [ 418s] + cd ise-engine-default-1.0.11 [ 418s] + LANG=C [ 418s] + export LANG [ 418s] + unset DISPLAY [ 418s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 418s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 418s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 418s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 install [ 418s] Making install in src [ 418s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 418s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 418s] make[2]: Nothing to be done for 'install-exec-am'. [ 418s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine' [ 418s] /bin/sh ../libtool --mode=install /bin/install -c ise-engine-default.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine' [ 418s] libtool: install: /bin/install -c .libs/ise-engine-default.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine/ise-engine-default.so [ 419s] libtool: install: /bin/install -c .libs/ise-engine-default.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine/ise-engine-default.la [ 419s] libtool: warning: remember to run 'libtool --finish /usr/lib64/scim-1.0/1.4.0/IMEngine' [ 419s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 419s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 419s] Making install in data [ 419s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 419s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 419s] make[2]: Nothing to be done for 'install-exec-am'. [ 419s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/scim/icons' [ 419s] /bin/install -c -m 644 isf-default.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/scim/icons' [ 419s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 419s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 419s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 419s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 419s] make[2]: Nothing to be done for 'install-exec-am'. [ 419s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/packages' [ 419s] /bin/install -c -m 644 ise-engine-default.xml '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/packages' [ 420s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 420s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 420s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/info/dir [ 420s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 -regex '.*\.la$' [ 420s] + xargs rm -f -- [ 420s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 -regex '.*\.a$' [ 420s] + xargs rm -f -- [ 420s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1.0.11-1 --unique-debug-src-base ise-engine-default-1.0.11-1.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11 [ 423s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine/ise-engine-default.so [ 424s] 36 blocks [ 425s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/ise-engine-default-debuginfo.manifest [ 425s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/ise-engine-default-debugsource.manifest [ 425s] + /usr/lib/rpm/check-buildroot [ 425s] + /usr/lib/rpm//brp-compress [ 425s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 426s] + /usr/lib/rpm/brp-python-hardlink [ 426s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 426s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/isu.list [ 426s] ~/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 ~/rpmbuild/BUILD/ise-engine-default-1.0.11 [ 426s] ~/rpmbuild/BUILD/ise-engine-default-1.0.11 [ 426s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 427s] Processing files: ise-engine-default-1.0.11-1.riscv64 [ 427s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 427s] cmVxdWVzdD4KPGFzc2lnbj4KICAgIDxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmlu [ 427s] LyoiIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CjwvYXNzaWduPgo8L21hbmlmZXN0Pgo= [ 427s] [ 427s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ZDVH96 [ 427s] + umask 022 [ 427s] + cd /home/abuild/rpmbuild/BUILD [ 427s] + cd ise-engine-default-1.0.11 [ 427s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/licenses/ise-engine-default [ 427s] + export LC_ALL=C [ 427s] + LC_ALL=C [ 427s] + export LICENSEDIR [ 427s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/licenses/ise-engine-default [ 427s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/licenses/ise-engine-default [ 427s] + exit 0 [ 427s] Provides: ise-engine-default = 1.0.11-1 ise-engine-default(riscv-64) = 1.0.11-1 [ 427s] Requires(interp): /bin/sh /bin/sh [ 427s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 427s] Requires(post): /bin/sh [ 427s] Requires(postun): /bin/sh [ 427s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libisf-control.so.8()(64bit) libm.so.6()(64bit) libscim-1.0.so.8()(64bit) libscim_imengine.so.8()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.32)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 427s] Processing files: ise-engine-default-debugsource-1.0.11-1.riscv64 [ 427s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 427s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 427s] [ 427s] Provides: ise-engine-default-debugsource = 1.0.11-1 ise-engine-default-debugsource(riscv-64) = 1.0.11-1 [ 427s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 427s] Processing files: ise-engine-default-debuginfo-1.0.11-1.riscv64 [ 427s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 427s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 427s] [ 427s] Provides: ise-engine-default-debuginfo = 1.0.11-1 ise-engine-default-debuginfo(riscv-64) = 1.0.11-1 [ 427s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 427s] Recommends: ise-engine-default-debugsource(riscv-64) = 1.0.11-1 [ 427s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 428s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/ise-engine-default-1.0.11-1.riscv64.rpm [ 428s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/ise-engine-default-debugsource-1.0.11-1.riscv64.rpm [ 428s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/ise-engine-default-debuginfo-1.0.11-1.riscv64.rpm [ 428s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Jf7q2f [ 428s] + umask 022 [ 428s] + cd /home/abuild/rpmbuild/BUILD [ 428s] + cd ise-engine-default-1.0.11 [ 428s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 428s] + exit 0 [ 428s] ... checking for files with abuild user/group [ 428s] ... creating baselibs [ 431s] [ 431s] ip-192-168-56-230 finished "build ise-engine-default.spec" at Fri Dec 6 17:45:57 UTC 2024. [ 431s]