# packages

pkgId: d0b0207dcfc6d34cbe09d7541c3b0ac3a4b0c4ccb093383691474d8c51357085
name: perl-MRO-Compat
arch: x86_64
version: 0.15
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/MRO::Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-MRO-Compat-0.15-1.src.rpm
location_href: x86_64/perl-MRO-Compat-0.15-1.x86_64.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing
  with method resolution order and method caching in general
  in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier
  versions of Perl (back to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+.
  That is to say, code which properly uses MRO::Compat
  will work unmodified on both older Perls and 5.9.5+.

  If you're writing a piece of software that would like
  to use the parts of 5.9.5+'s mro:: interfaces that are
  supported here, and you want compatibility
  with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster
  with Class::C3::XS installed (which is an optional
  prereq of Class::C3, which is in turn a prereq of
  this package), but it's not a requirement.

  This module never exports any functions.
  All calls must be fully qualified with the mro:: prefix.

  The interface documentation here serves only as a quick
  reference of what the function basically does, and what
  differences between MRO::Compat and 5.9.5+ one should look out for.
  The main docs in 5.9.5's mro are the real interface docs,
  and contain a lot of other useful information.


pkgId: 6dbb9007fe849a75c46f7e7c965ec521b95c8fa6195a93c9447020aab82eb563
name: perl-Module-Runtime
arch: x86_64
version: 0.016
epoch: 0
release: 1
summary: runtime module handling
url: https://metacpan.org/pod/Module::Runtime
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Module-Runtime-0.016-1.src.rpm
location_href: x86_64/perl-Module-Runtime-0.016-1.x86_64.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl modules,
  which are normally handled at compile time. This module avoids using any other modules,
  so that it can be used in low-level infrastructureb.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of
  the Perl on which it is running. In practice the usable syntax hasn't changed yet.
  There's some intent for Unicode module names to be supported in the future,
  but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include workarounds
  for three old Perl core bugs regarding require. These workarounds are applied on any Perl version
  where the bugs exist, except for a case where one of the bugs cannot be adequately worked around in pure Perl.


pkgId: 9e0d7af92522c7dd6659253968e504c5159e87888ee3142956a9d743e4bbd263
name: perl-Net-DBus
arch: x86_64
version: 1.2.0
epoch: 0
release: 1
summary: Perl extension for the DBus message system
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.src.rpm
location_href: x86_64/perl-Net-DBus-1.2.0-1.x86_64.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the the Net::DBus::Service manpage and the Net::DBus::Object manpage
  modules are of most relevance, or are client consumers, in which case the
  Net::DBus::RemoteService manpage and the Net::DBus::RemoteObject manpage
  are of most relevance.


pkgId: 10a8832660a95ad3ebd017c78dd26976e26b229047f3fb6bf96aa05a973a5a34
name: perl-Package-Stash
arch: x86_64
version: 0.40
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/Package::Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Package-Stash-0.40-1.src.rpm
location_href: x86_64/perl-Package-Stash-0.40-1.x86_64.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally
  necessary, but incredibly messy, and easy to get wrong.
  This module hides all of that behind a simple API.

  NOTE: Most methods in this class require a variable specification
  that includes a sigil. If this sigil is absent, it is assumed
  to represent the IO slot.

  Due to limitations in the typeglob API available to perl code,
  and to typeglob manipulation in perl being quite slow, this module
  provides two implementations - one in pure perl, and one using XS.
  The XS implementation is to be preferred for most usages; the pure
  perl one is provided for cases where XS modules are not a possibility.
  The current implementation in use can be set by setting
  $ENV{PACKAGE_STASH_IMPLEMENTATION} or $Package::Stash::IMPLEMENTATION
  before loading Package::Stash (with the environment variable
  taking precedence), otherwise, it will use the XS implementation
  if possible, falling back to the pure perl one.


pkgId: e4c18ccf66153d0aa49ee8490c06a65a69f4c0bf875e6a2408dc02d5fe81d82b
name: perl-Params-ValidationCompiler
arch: x86_64
version: 0.31
epoch: 0
release: 1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/pod/Params::ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.src.rpm
location_href: x86_64/perl-Params-ValidationCompiler-0.31-1.x86_64.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient
  parameter checking subroutine. It can handle named
  or positional parameters, and can return the
  parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports
  parameter defaults, optional parameters, and
  extra "slurpy" parameters.


pkgId: e4700720095c79fac54b93b3a6087a6ac834b0c1302f39f8e934dedd445420e5
name: perl-Path-Tiny
arch: x86_64
version: 0.150
epoch: 0
release: 0
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Path-Tiny-0.150-0.src.rpm
location_href: x86_64/perl-Path-Tiny-0.150-0.x86_64.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: ef0db491b1f28854d7731bed8ce55b6911dc211bd602c58dbe2774376fb1fdf9
name: perl-Specio
arch: x86_64
version: 0.48
epoch: 0
release: 1
summary: Base class for type libraries
url: https://metacpan.org/pod/Specio::Exporter
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Specio-0.48-1.src.rpm
location_href: x86_64/perl-Specio-0.48-1.x86_64.rpm
checksum_type: sha256
description:
  Inheriting from this package makes your package a type exporter.
  By default, types defined in a package are never visible outside
  of the package. When you inherit from this package, all the types
  you define internally become available via exports.

  The exported types are available through the importing package's t subroutine.

  By default, types your package imports are not re-exported:

   package MyApp::Type::Library;

   use parent 'Specio::Exporter';

   use Specio::Declare;
   use Specio::Library::Builtins;

  In this case, the types provided by Specio::Library::Builtins are not
  exported to packages which use MyApp::Type::Library.

  You can explicitly ask for types to be re-exported:

    package MyApp::Type::Library;

    use parent 'Specio::Exporter';

    use Specio::Declare;
    use Specio::Library::Builtins -reexport;

  In this case, packages which use MyApp::Type::Library will get
  all the types from Specio::Library::Builtins as well as any
  types defined in MyApp::Type::Library.


pkgId: 384f0f093653952352aefe650062c5cab0816d291d1126724151e2f50fd1e332
name: perl-Sub-Exporter-Progressive
arch: x86_64
version: 0.001013
epoch: 0
release: 1
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/pod/Sub::Exporter::Progressive
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.src.rpm
location_href: x86_64/perl-Sub-Exporter-Progressive-0.001013-1.x86_64.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power
  comes great responsibility, er- as well as some runtime penalties.
  This module is a Sub::Exporter wrapper that will let your users just
  use Exporter if all they are doing is picking exports, but use Sub::Exporter
  if your users try to use Sub::Exporter's more advanced features,
  like renaming exports, if they try to use them.

  Note that this module will export @EXPORT, @EXPORT_OK and %EXPORT_TAGS
  package variables for Exporter to work. Additionally, if your package
  uses advanced Sub::Exporter features like currying, this module will
  only ever use Sub::Exporter, so you might as well use it directly.


pkgId: 0a43281b479b79d68261c5665aa31cd022b06e81ab73895885afe5da71aad8b1
name: perl-Sub-Identify
arch: x86_64
version: 0.14
epoch: 0
release: 1
summary: Retrieve names of code references
url: https://metacpan.org/pod/Sub::Identify
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Identify-0.14-1.src.rpm
location_href: x86_64/perl-Sub-Identify-0.14-1.x86_64.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references.
  It provides six functions, all of them taking a code reference.
  sub_name returns the name of the code reference passed as an argument
  (or __ANON__ if it's an anonymous code reference), stash_name
  returns its package, and sub_fullname returns the concatenation of the two.

  get_code_info
  returns a list of two elements, the package and the subroutine name
  (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original name.
  get_code_location returns a two-element list containing the file name
  and the line number where the subroutine has been defined.

  is_sub_constant returns a boolean value indicating whether
  the subroutine is a constant or not.


pkgId: 9c492dd48c9cbf3c530b6e476b6051d59b6bad11fb29b11e9cb38b87e8d90438
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Switch-2.17-1.src.rpm
location_href: noarch/perl-Switch-2.17-1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.


pkgId: 492e786129c9dab71dd1e1673776502fae406bd9f5f0010d812cf28cee63bbd3
name: perl-Term-Table
arch: x86_64
version: 0.023
epoch: 0
release: 0
summary: Format a header and rows into a table
url: https://metacpan.org/release/Term-Table
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Term-Table-0.023-0.src.rpm
location_href: x86_64/perl-Term-Table-0.023-0.x86_64.rpm
checksum_type: sha256
description:
  This is used by some failing tests to provide diagnostics about what has
  gone wrong. This module is able to format rows of data into tables.


pkgId: a41dd6882c26bbfd111ed37a43f896818b80c6973a8ba988aa8103d66dbc93b3
name: perl-Test2-Suite
arch: x86_64
version: 1.302216
epoch: 0
release: 0
summary: Distribution with a rich set of tools built upon the Test2 framework
url: https://metacpan.org/release/Test2-Suite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Test2-Suite-1.302216-0.src.rpm
location_href: x86_64/perl-Test2-Suite-1.302216-0.x86_64.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc built upon the Test2 testing
  library. If you are interested in writing tests, this is the distribution
  for you.


pkgId: abed7c9e364b6640e2fd4d449b2cfed065b9c279fd6e9e37a3edc0b161a75457
name: perl-Try-Tiny
arch: x86_64
version: 0.32
epoch: 0
release: 1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/pod/Try::Tiny
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Try-Tiny-0.32-1.src.rpm
location_href: x86_64/perl-Try-Tiny-0.32-1.x86_64.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch/finally statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block
  to return from the parent subroutine. These extra features come
  at a cost of a few dependencies, namely Devel::Declare and Scope::Upper
  which are occasionally problematic, and the additional catch filtering
  uses Moose type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct eval blocks without 5 lines of boilerplate each time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see "BACKGROUND") and to be compatible with
  any style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the try block dies, it returns the value of the last statement executed
  in the catch block, if there is one. Otherwise, it returns undef in scalar
  context or the empty list in list context. The following examples
  all assign "bar" to $x:

  my $x = try { die "foo" } catch { "bar" };
  my $x = try { die "foo" } || "bar";
  my $x = (try { die "foo" }) // "bar";

   my $x = eval { die "foo" } || "bar";
   You can add finally blocks, yielding the following:

   my $x;
   try { die 'foo' } finally { $x = 'bar' };
   try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

   finally blocks are always executed making them suitable for cleanup code
   which cannot be handled using local. You can add as many finally blocks
   to a given try block as you like.

   Note that adding a finally block without a preceding catch block suppresses
   any errors. This behaviour is consistent with using a standalone eval,
   but it is not consistent with try/finally patterns found in other programming
   languages, such as Java, Python, Javascript or C#. If you learned
   the try/finally pattern from one of these languages, watch out for this.


pkgId: 06263af1861dcb81f9e95af970dde59edab38c2274ba44d397769bed7a6e6e4e
name: perl-Variable-Magic
arch: x86_64
version: 0.64
epoch: 0
release: 1
summary: Associate user-defined magic to variables from Perl.
url: https://metacpan.org/pod/Variable::Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Variable-Magic-0.64-1.src.rpm
location_href: x86_64/perl-Variable-Magic-0.64-1.x86_64.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism
  lets the user add extra data to any variable and hook
  syntactical operations (such as access, assignment or destruction)
  that can be applied to it. With this module, you can add
  your own magic to any variable without having to write a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special
  kind of magic, just like any 'irregular' Perl variable : scalars like $!,
  $( or $^W, the %ENV and %SIG hashes, the @ISA array, vec() and substr()
  lvalues, threads::shared variables... They all share the same underlying
  C API, and this module gives you direct access to it.


pkgId: eeae258bf9eea678b936450d04d857d757752e546bbd0e7757592f20958f56f6
name: perl-XML-LibXML
arch: x86_64
version: 2.0210
epoch: 0
release: 0
summary: Perl Binding for libxml2
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-LibXML-2.0210-0.src.rpm
location_href: x86_64/perl-XML-LibXML-2.0210-0.x86_64.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the Gnome libxml2 library which
  provides interfaces for parsing and manipulating XML files. This module allows
  Perl programmers to make use of the highly capable validating XML parser and
  the high performance DOM implementation.

  Authors:
  	Matt Sergeant, Christian Glahn, Petr Pajas


pkgId: 0d6b69377cb0184dbd7a6191ad01d3e6fc5d2e5f27388d054feb95199f260149
name: perl-XML-NamespaceSupport
arch: x86_64
version: 1.12
epoch: 0
release: 0
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-0.src.rpm
location_href: x86_64/perl-XML-NamespaceSupport-1.12-0.x86_64.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: 7d011c83719a7a622b619386fd51240c608aaa7f8045d467d8c3e17759b74d1c
name: perl-XML-SAX
arch: x86_64
version: 1.02
epoch: 0
release: 6
summary: XML::SAX Perl Module
url: http://www.cpan.org/modules/by-module/XML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-1.02-6.src.rpm
location_href: x86_64/perl-XML-SAX-1.02-6.x86_64.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: 02a72dfb5cd67a0d937ab77839d26e65041f00532105aefa6830b24291e223e8
name: perl-XML-SAX-Base
arch: x86_64
version: 1.09
epoch: 0
release: 0
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-Base-1.09-0.src.rpm
location_href: x86_64/perl-XML-SAX-Base-1.09-0.x86_64.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: 35724d265db2cdf92d7e312af832b7a2ce4a6ea10beb2f00b4cd2d2028153e32
name: perl-XML-Twig
arch: x86_64
version: 3.52
epoch: 0
release: 1
summary: Tree interface to XML documents
url: http://search.cpan.org/dist/XML::Twig
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-Twig-3.52-1.src.rpm
location_href: x86_64/perl-XML-Twig-3.52-1.x86_64.rpm
checksum_type: sha256
description:
  XML::Twig is (yet another!) XML transformation module.

  Its strong points: can be used to process huge documents while still
  being in tree mode; not bound by DOM or SAX, so it is very perlish and
  offers a very comprehensive set of methods; simple to use; DWIMs as
  much as possible

  What it doesn't offer: full SAX support (it can export SAX, but only
  reads XML), full XPath support (unless you use XML::Twig::XPath), nor
  DOM support.

  Other drawbacks: it is a big module, and with over 500 methods
  available it can be a bit overwhelming. A good starting point is the
  tutorial at http://xmltwig.com/xmltwig/tutorial/index.html. In fact the
  whole XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of
  information to get you started with XML::Twig


pkgId: 76cb702566f42f58eae23bda9edd94d98816520c84290ad629a4473bdf42efb2
name: perl-YAML
arch: x86_64
version: 1.31
epoch: 0
release: 0
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-YAML-1.31-0.src.rpm
location_href: x86_64/perl-YAML-1.31-0.x86_64.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. the http://www.yaml.org/spec/ manpage

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: 041e3b22fce0ce1bef42bf001411893d5e5f8d571793c6381d1f79db0218ebd2
name: perl-namespace-autoclean
arch: x86_64
version: 0.31
epoch: 0
release: 1
summary: Keep imports out of your namespace
url: https://metacpan.org/pod/namespace::autoclean
rpm_license: perl_5
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-autoclean-0.31-1.src.rpm
location_href: x86_64/perl-namespace-autoclean-0.31-1.x86_64.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be available as a method.
  The namespace::autoclean pragma will remove all imported symbols at the end of the current package's
  compile cycle. Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.
  This module is very similar to namespace::clean, except it will clean all imported functions,
  no matter if you imported them before or after you used the pragma.
  It will also not touch anything that looks like a method.
  If you're writing an exporter and you want to clean up after yourself (and your peers),
  you can use the -cleanee switch to specify what package to clean:

  package My::MooseX::namespace::autoclean;
  use strict;

  use namespace::autoclean (); # no cleanup, just load

  sub import {
      namespace::autoclean->import(
        -cleanee => scalar(caller),
      );
  }


pkgId: 892c1c9ec51bb7c0de46a9eeac314d7e43418bbcb61014f52e04977704bf14c4
name: perl-namespace-clean
arch: x86_64
version: 0.27
epoch: 0
release: 1
summary: Keep imports and functions out of your namespace
url: https://metacpan.org/pod/namespace::clean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-clean-0.27-1.src.rpm
location_href: x86_64/perl-namespace-clean-0.27-1.x86_64.rpm
checksum_type: sha256
description:
  Keeping packages clean
  When you define a function, or import one, into a Perl package,
  it will naturally also be available as a method. This does not
  per se cause problems, but it can complicate subclassing and,
  for example, plugin classes that are included via multiple
  inheritance by loading them as base classes.

  The namespace::clean pragma will remove all previously declared
  or imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.

  By unimporting via no you can tell namespace::clean to start
  collecting functions for the next use namespace::clean; specification.

  You can use the -except flag to tell namespace::clean that you don't
  want it to remove a certain function or method. A common use would be
  a module exporting an import method along with some functions:


pkgId: ac95ed5454231d50078abcfb399928e8110604850e4df01d72b43ef2f18c8f0a
name: prelink
arch: x86_64
version: 20130503
epoch: 0
release: 0
summary: An ELF Prelinking Utility
url: http://people.redhat.com/jakub/prelink/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: prelink-20130503-0.src.rpm
location_href: x86_64/prelink-20130503-0.x86_64.rpm
checksum_type: sha256
description:
  The prelink program is a utility that modifies shared libraries and
  executables in the ELF format so that far less relocations need to be
  resolved at run time.  This decreases program start-up time.

  Be aware that prelink can modify all libraries and executables on your
  system. Applications which monitor changes in files or RPM itself
  will no longer work.


pkgId: a2e755804da11acee8b6cb8b5b5135ac20e3dec5a555b6f6ce3a97baa7f795e0
name: privilege-verifier
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Verification Utility
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/privilege-verifier-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Verifier Utility provides functions to verify privilege information of packages to be installed.


pkgId: 5044e8df559f06dd8437b0bf889fd29d59f84f2f3d70ad0284acf77cf5094ff7
name: protobuf
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: eb914e458eb49f4134c79064dc858fb33605648f67d806df3651408af0787b9e
name: protobuf-lite
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: b46f48dbb8da7c5fd8ab24dbcba0861ec59a6efb33411f32fdf997a52b2bce31
name: protobuf-lite-devel
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-devel-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 1b981455974faea835d02625d16b59cc6fa5710710f1436291a0b6a80f8cc97f
name: protobuf-lite-static
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-static-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 00dc563d26fdd049b46ed3daeb12e77fc5793e790aa8a9fe1fd58d9b0c40f53a
name: psmisc
arch: x86_64
version: 23.7
epoch: 0
release: 1
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: psmisc-23.7-1.src.rpm
location_href: x86_64/psmisc-23.7-1.x86_64.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs of
  processes that are using specified files or filesystems.


pkgId: 4dca58e75a1eb3b2bda77c48bbb20b27883627225947835d80dfe61cd947be2b
name: pulseaudio
arch: x86_64
version: 15.0
epoch: 0
release: 41
summary: Improved Linux sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: x86_64/pulseaudio-15.0-41.x86_64.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: de9a18c4c9c33672330cd353990f3f46c33345f023994467067606b9039a9fdd
name: pulseaudio-utils
arch: x86_64
version: 15.0
epoch: 0
release: 41
summary: Command line tools for the PulseAudio sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: x86_64/pulseaudio-utils-15.0-41.x86_64.rpm
checksum_type: sha256
description:
  These tools provide command line access to various features of the
  PulseAudio sound server. Included tools are:
  pabrowse - Browse available PulseAudio servers on the local network.
  paplay - Playback a WAV file via a PulseAudio sink.
  pacat - Cat raw audio data to a PulseAudio sink.
  parec - Cat raw audio data from a PulseAudio source.
  pacmd - Connect to PulseAudio's built-in command line control interface.
  pactl - Send a control command to a PulseAudio server.
  padsp - /dev/dsp wrapper to transparently support OSS applications.
  pax11publish - Store/retrieve PulseAudio default server/sink/source
  settings in the X11 root window.


pkgId: 88d97d0a5c96ed9097cc364e2cf9fe878fbaec0285c6994a850f04ca3c76b392
name: pygobject2
arch: x86_64
version: 3.55.0
epoch: 0
release: 1
summary: Python bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: x86_64/pygobject2-3.55.0-1.x86_64.rpm
checksum_type: sha256
description:
  The pygobject2 package provides a convenient wrapper for the GObject library
  for use in Python programs. This is version 3.55.0, an upgrade from the
  Tizen base version 3.46.0.


pkgId: 6c315826c9af7b96ac2984caa36d29c438a0bc56f94f24e63d5f6da66c79ab72
name: pygobject2-devel
arch: x86_64
version: 3.55.0
epoch: 0
release: 1
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: x86_64/pygobject2-devel-3.55.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject2-based
  libraries such as pygtk2.


pkgId: 5f2d2e21db8046804aa98d965309dd93cffab11caaa46908807500c33b022422
name: python-Cheetah
arch: x86_64
version: 2.4.4
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-Cheetah-2.4.4-0.src.rpm
location_href: x86_64/python-Cheetah-2.4.4-0.x86_64.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python code.


pkgId: 7ebbfb3fd436966242d399a8bd28ed2cbe45378b75d9580ac85ede64d898ba19
name: python-PyYAML
arch: x86_64
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: x86_64/python-PyYAML-3.10-0.x86_64.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: b8f6cea18e8923e7db18390b6df9ff92b125ace11a366ecd50d83c4a0ffb7a7e
name: python-ZSI
arch: noarch
version: 2.1.a1
epoch: 0
release: 0
summary: Zolera SOAP Infrastructure
url: http://pywebsvcs.sf.net
rpm_license: Python
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-ZSI-2.1.a1-0.src.rpm
location_href: noarch/python-ZSI-2.1.a1-0.noarch.rpm
checksum_type: sha256
description:
  ZSI, the Zolera SOAP Infrastructure, is a pure-Python module that
  provides an implementation of SOAP messaging, as described in SOAP 1.1
  Specification (see http://www.w3.org/TR/soap).  It can also be used to
  build applications using SOAP Messages with Attachments (see
  http://www.w3.org/TR/SOAP-attachments).  ZSI is intended to make it
  easier to write web services in Python.

  In particular, ZSI parses and generates SOAP messages, and converts
  between native Python datatypes and SOAP syntax. Simple dispatch and
  invocation methods are supported.  There are no known bugs.  Its only
  known limitation is that it cannot handle multi-dimensional arrays.


pkgId: 9397c41bdf22d262462666e907294e65c8f96baea373b8b75701161d6ba2902a
name: python-coverage
arch: x86_64
version: 3.6
epoch: 0
release: 0
summary: Code coverage measurement for Python
url: http://nedbatchelder.com/code/coverage
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-coverage-3.6-0.src.rpm
location_href: x86_64/python-coverage-3.6-0.x86_64.rpm
checksum_type: sha256
description:
  Coverage.py measures code coverage, typically during test execution. It uses
  the code analysis tools and tracing hooks provided in the Python standard
  library to determine which lines are executable, and which have been executed.


pkgId: b8ed6bff91dc77c17ff7f319d76557e3b3dbe868645f9215687bb37a9a07efb2
name: python-cython
arch: x86_64
version: 0.29.21
epoch: 0
release: 0
summary: The Cython compiler for writing C extensions for the Python language
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-cython-0.29.21-0.src.rpm
location_href: x86_64/python-cython-0.29.21-0.x86_64.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as
  easy as Python itself.  Cython is a source code translator based on the
  well-known Pyrex, but supports more cutting edge functionality and
  optimizations.

  The Cython language is very close to the Python language (and most Python
  code is also valid Cython code), but Cython additionally supports calling C
  functions and declaring C types on variables and class attributes. This
  allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C
  libraries, and for fast C modules that speed up the execution of Python
  code.


pkgId: 4c8fc2098afd60c852b1b04d970ff901c56b636043bd7bff3299a3ca74b94f37
name: python-distribute
arch: noarch
version: 0.6.32
epoch: 0
release: 0
summary: Easily download, build, install, upgrade, and uninstall Python packages
url: http://packages.python.org/distribute
rpm_license: Python-2.0 or ZPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-distribute-0.6.32-0.src.rpm
location_href: noarch/python-distribute-0.6.32-0.noarch.rpm
checksum_type: sha256
description:
  Distribute is a fork of the Setuptools project.

  Distribute is intended to replace Setuptools as the standard method for working
  with Python module distributions.


pkgId: c57e1203d2cd6fe22affb488bd9e019803b935b46a8be3298e898c3f6bda494f
name: python-gobject-cairo
arch: x86_64
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: x86_64/python-gobject-cairo-3.36.1-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains the Python Cairo bindings for GObject.


pkgId: 6e21d83c797a470a3402481186353f88932ef46cae8817f9793e68bd7d38f88b
name: python-gobject-pygtkcompat
arch: x86_64
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: x86_64/python-gobject-pygtkcompat-3.36.1-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 9f9aa66f9f19fa7f0e557762bc3e6a5adbbe91801a5e5f72ba53100291fef2e9
name: python-gpgme
arch: x86_64
version: 0.1
epoch: 0
release: 0
summary: A Python module for working with OpenPGP messages
url: http://pypi.python.org/pypi/pygpgme
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-gpgme-0.1-0.src.rpm
location_href: x86_64/python-gpgme-0.1-0.x86_64.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and
  decrypt messages using the OpenPGP format.

  It is built on top of the GNU Privacy Guard and the GPGME library.


pkgId: 1ae60d7593c8d751e82f1c8fd76a69c8e1056846796ccb625c200b20831b53cd
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 0
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-iniparse-0.4-0.src.rpm
location_href: noarch/python-iniparse-0.4-0.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the
  standard library's ConfigParser, preserves structure of INI files
  (order of sections & options, indentation, comments, and blank lines
  are preserved when data is updated), and is more convenient to use.


pkgId: a97b16c07d91ecf67c7df66be0333faf49182ce6d7e15747b8c50c4ef319d20b
name: python-numpy
arch: x86_64
version: 1.16.6
epoch: 0
release: 0
summary: NumPy array processing for numbers, strings, records and objects
url: http://www.numpy.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/Python
rpm_sourcerpm: python-numpy-1.16.6-0.src.rpm
location_href: x86_64/python-numpy-1.16.6-0.x86_64.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type which also makes NumPy suitable for
  interfacing with general-purpose data-base applications.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation.


pkgId: 02e0a33b54480dbb0478f714bbf9a639625f631e63bc9270e4f0fb5be896430b
name: python-pyOpenSSL
arch: noarch
version: 19.0.0.0
epoch: 0
release: 0
summary: Python wrapper module around the OpenSSL library
url: https://github.com/pyca/pyopenssl
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pyOpenSSL-19.0.0.0-0.src.rpm
location_href: noarch/python-pyOpenSSL-19.0.0.0-0.noarch.rpm
checksum_type: sha256
description:
  High-level wrapper around a subset of the OpenSSL library, includes
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error codes
  ...  and much more ;)


pkgId: d63a2404bc8063a111534deef1141e1353ab442430e6d13044d574efa0b71bb8
name: python-pycrypto
arch: x86_64
version: 2.6.1
epoch: 0
release: 0
summary: Cryptographic modules for Python
url: http://www.pycrypto.org/
rpm_license: Public Domain
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pycrypto-2.6.1-0.src.rpm
location_href: x86_64/python-pycrypto-2.6.1-0.x86_64.rpm
checksum_type: sha256
description:
  The package contains:

    * Hash functions: MD2, MD4, RIPEMD, SHA256.
    * Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES,
      Triple-DES, IDEA, RC5.
    * Stream encryption algorithms: ARC4, simple XOR.
    * Public-key algorithms: RSA, DSA, ElGamal, qNEW.
    * Protocols: All-or-nothing transforms, chaffing/winnowing.
    * Miscellaneous: RFC1751 module for converting 128-key keys into a
      set of English words, primality testing.
    * Some demo programs (currently all quite old and outdated).


pkgId: 21a5e58872bd97aac0b62baff2860def2b8cd7dd4978393948e65d6def2a4d91
name: python-pycurl
arch: x86_64
version: 7.19.0
epoch: 0
release: 0
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPL-2.1+ or MIT/X11
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-pycurl-7.19.0-0.src.rpm
location_href: x86_64/python-pycurl-7.19.0-0.x86_64.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: 12c7b4447ffdc8ee7b9e5d1ef0009216efc975ad876e133a297820351a76cf78
name: python-sqlite
arch: x86_64
version: 2.6.3
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: http://pysqlite.googlecode.com/
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-sqlite-2.6.3-0.src.rpm
location_href: x86_64/python-sqlite-2.6.3-0.x86_64.rpm
checksum_type: sha256
description:
  Python interface to SQLite 3

  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: e68a2f50fda0a6aec1e192e42b891f290bba9f3536605cc559abb1c9ab60d009
name: python-urlgrabber
arch: noarch
version: 3.9.1
epoch: 0
release: 0
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-urlgrabber-3.9.1-0.src.rpm
location_href: noarch/python-urlgrabber-3.9.1-0.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: 2d4124205998c04b7998ff0f86efa5615bc74df21c4a5049f299993b6fc97923
name: python3-Cheetah
arch: x86_64
version: 3.4.0.post5
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python3
rpm_sourcerpm: python3-Cheetah-3.4.0.post5-0.src.rpm
location_href: x86_64/python3-Cheetah-3.4.0.post5-0.x86_64.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python3 code.


pkgId: 86866ad28001a899970d3ff08a6d3a164b5b9b519bd986cdc708d36e11ba09f3
name: python3-PyYAML
arch: x86_64
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python3
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: x86_64/python3-PyYAML-3.10-0.x86_64.rpm
checksum_type: sha256
description:
  PyYAML for Python3

  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 85e92267067378c391445bf94b0ca52445988f695d45e30c05883cae59e96825
name: python3-asn1crypto
arch: x86_64
version: 1.5.1
epoch: 0
release: 0
summary: python3-asn1crypto
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Testing
rpm_sourcerpm: python3-asn1crypto-1.5.1-0.src.rpm
location_href: x86_64/python3-asn1crypto-1.5.1-0.x86_64.rpm
checksum_type: sha256
description:
  ASN.1 parser and serializer with definitions for private keys, public keys,
  certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8, PKCS#12, PKCS#5, X509 and TSP


pkgId: d7bebe2ae5b4dacb06dfafb29f03df78927daa6812e84dbc6d813013d8c80ed4
name: python3-atomicwrites
arch: x86_64
version: 1.4.1
epoch: 0
release: 0
summary: Atomic file writes for Python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-atomicwrites-1.4.1-0.src.rpm
location_href: x86_64/python3-atomicwrites-1.4.1-0.x86_64.rpm
checksum_type: sha256
description:
  Atomic file writes for python3.
  Features that distinguish it from other similar libraries:

  - Race-free assertion that the target file doesn't yet exist. This can be
    controlled with the 'overwrite' parameter.

  - High-level API that wraps a very flexible class-based API


pkgId: c906f4c2f23421c608103f63af42734f8c48fa7c24a7f0da207c521d5c91c9df
name: python3-catkin-pkg
arch: noarch
version: 1.1.0
epoch: 0
release: 1
summary: catkin package library
rpm_license: BSD
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-catkin-pkg-1.1.0-1.src.rpm
location_href: noarch/python3-catkin-pkg-1.1.0-1.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support complex functional testing for applications and libraries.


pkgId: 70cfbb6bb805b67297e97279e0545356a25945f19c47ca5ea6a6612ed110becd
name: python3-cffi
arch: x86_64
version: 2.0.0
epoch: 0
release: 0
summary: Foreign Function Interface for Python calling C code
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-cffi-2.0.0-0.src.rpm
location_href: x86_64/python3-cffi-2.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python calling C code. The aim of this project
  is to provide a convenient and reliable way of calling C code from Python.


pkgId: 00bc6a3fd7a78458f5fb75d8996325a4c5d62d7fd3b2e12c6cd0751e2ee16028
name: python3-cryptography
arch: x86_64
version: 2.3
epoch: 0
release: 0
summary: PyCA's cryptography library
rpm_license: Apache-2.0 or BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-cryptography-2.3-0.src.rpm
location_href: x86_64/python3-cryptography-2.3-0.x86_64.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: 12adc540de277554f54e3d15ae52d54e66c2bd4a580735c26f071ed667cf4c08
name: python3-distlib
arch: noarch
version: 0.4.0
epoch: 0
release: 1
summary: packaging and distribution of Python software
rpm_license: Python-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-distlib-0.4.0-1.src.rpm
location_href: noarch/python3-distlib-0.4.0-1.noarch.rpm
checksum_type: sha256
description:
  Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software.


pkgId: 4d8fb7f1feaac60470af5e43dd9a879cf5dd605ff6c9b405fb5d36c6f4a81e37
name: python3-empy
arch: noarch
version: 4.2
epoch: 0
release: 0
summary: A powerful and robust template system for Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: python3-empy-4.2-0.src.rpm
location_href: noarch/python3-empy-4.2-0.noarch.rpm
checksum_type: sha256
description:
  EmPy is a system for embedding Python expressions and statements in template
  text; it takes an EmPy source file, processes it, and produces output.


pkgId: 1878b6dea4d170108970622f88958ef9188b7aa65ff938d5c3f549d806ad4951
name: python3-gobject-cairo
arch: x86_64
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: x86_64/python3-gobject-cairo-3.46.0-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains the Python3 Cairo bindings for GObject.


pkgId: 3cb521909487dde7a19a487baa718070bcab497d5a652b4419009e330872a3bd
name: python3-gobject-pygtkcompat
arch: x86_64
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: x86_64/python3-gobject-pygtkcompat-3.46.0-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 7df60eb001652733bda2ae63a11f207b1c7515d9e5d0324b369381d696276214
name: python3-grpcio
arch: x86_64
version: 1.76.0
epoch: 0
release: 0
summary: HTTP/2-based Remote Procedure Call implementation
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-grpcio-1.76.0-0.src.rpm
location_href: x86_64/python3-grpcio-1.76.0-0.x86_64.rpm
checksum_type: sha256
description:
  gRPC is a remote procedure call (RPC) framework. gRPC enables client
  and server applications to communicate, and enables the building of
  connected systems.


pkgId: be9ec87221997fd56270574345e6c87d1e1f98774fa4118922a4c096db51a205
name: python3-hatch-fancy-pypi-readme
arch: x86_64
version: 25.1.0
epoch: 0
release: 1
summary: Hatch plugin for writing fancy PyPI readmes
url: https://github.com/hynek/hatch-fancy-pypi-readme
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-fancy-pypi-readme-25.1.0-1.src.rpm
location_href: x86_64/python3-hatch-fancy-pypi-readme-25.1.0-1.x86_64.rpm
checksum_type: sha256
description:
  This provides a Hatch metadata plugin for everyone who cares about the
  first impression of their projectâ€™s PyPI landing page. It allows you to
  define your PyPI project description in terms of concatenated fragments
  that are based on static strings, files, and most importantly: parts of
  files defined using cut-off points or regular expressions.


pkgId: f0c5ba46bcc4412b588778966c79ab185fc960b44ccbd2f0b87cb8b0ca4d13b0
name: python3-hatch-vcs
arch: x86_64
version: 0.5.0
epoch: 0
release: 1
summary: Hatch plugin for versioning with your preferred VCS
url: https://github.com/ofek/hatch-vcs
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-vcs-0.5.0-1.src.rpm
location_href: x86_64/python3-hatch-vcs-0.5.0-1.x86_64.rpm
checksum_type: sha256
description:
  This provides a plugin for Hatch that uses your preferred version control
  system (like Git) to determine project versions.


pkgId: 00887ef8e4e813e73776fa1c4a4c589b5d343460cf9e581905ff3dcca76bf2eb
name: python3-idna
arch: noarch
version: 3.11
epoch: 0
release: 0
summary: Internationalized Domain Names in Applications (IDNA)
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-idna-3.11-0.src.rpm
location_href: noarch/python3-idna-3.11-0.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in
  Applications (IDNA) protocol as specified in RFC 5891
  http://tools.ietf.org/html/rfc5891. This version of the protocol
  is often referred to as \A1\B0IDNA2008\A1\B1 and can produce different
  results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement
  for the \A1\B0encodings.idna\A1\B1 module that comes with the Python standard
  library but currently only supports the older 2003 specification.


pkgId: 06534d16ee5f55eab16ed27bba50a7869b90e201edb60d551e7cc2b06be8fb59
name: python3-iso8601
arch: noarch
version: 2.1.0
epoch: 0
release: 0
summary: Simple module to parse ISO 8601 dates
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-iso8601-2.1.0-0.src.rpm
location_href: noarch/python3-iso8601-2.1.0-0.noarch.rpm
checksum_type: sha256
description:
  Simple module to parse ISO 8601 dates

  This module parses the most common forms of ISO 8601 date strings (e.g.
  2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: 6d867afb98e162dfb49f50286dd373d231be1d40bbbba4b6af61b5906d452027
name: python3-jinja2
arch: noarch
version: 3.1.3
epoch: 0
release: 1
summary: A syntax highlighting engine written in Python3
url: https://jinja.palletsprojects.com/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-jinja2-3.1.3-1.src.rpm
location_href: noarch/python3-jinja2-3.1.3-1.noarch.rpm
checksum_type: sha256
description:
  Jinja is a fast, expressive, extensible templating engine. Special
  placeholders in the template allow writing code similar to Python
  syntax. Then the template is passed data to render the final document.


pkgId: 311be3804930477d98789325ee7ea2bb1ee74f2077e6f888f3a1484a7b6f1a89
name: python3-meson-python
arch: noarch
version: 0.18.0
epoch: 0
release: 0
summary: Meson Python build backend (PEP 517)
url: https://github.com/mesonbuild/meson-python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-meson-python-0.18.0-0.src.rpm
location_href: noarch/python3-meson-python-0.18.0-0.noarch.rpm
checksum_type: sha256
description:
  meson-python is a Python build backend built on top of the Meson build system.
  It enables to use Meson for the configuration and build steps of Python
  packages. Meson is an open source build system meant to be both extremely fast,
  and, even more importantly, as user friendly as possible. meson-python is best
  suited for building Python packages containing extension modules implemented in
  languages such as C, C++, Cython, Fortran, Pythran, or Rust. Consult the
  documentation for more details.


pkgId: 2e746643530c0b8f78f35f04da2c7bd9391dc27b2aa4c432b8d996ace39fed63
name: python3-more-itertools
arch: noarch
version: 10.8.0
epoch: 0
release: 0
summary: More routines for operating on iterables, beyond itertools
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-more-itertools-10.8.0-0.src.rpm
location_href: noarch/python3-more-itertools-10.8.0-0.noarch.rpm
checksum_type: sha256
description:
  I love itertools; it's one of the most beautiful, composable standard libs.
  Whenever I have an iteration problem, there's almost always an itertools
  routine that fits it perfectly. Sometimes, however, neither itertools nor the
  recipes included in its docs do quite what I need.

  Here I've collected several routines I've reached for but not found. Since
  they are deceptively tricky to get right, I've wrapped them up into a library.
  We've also included implementations of the recipes from the itertools
  documentation. Enjoy! Any additions are welcome; just file a pull request.


pkgId: 1d961e0fcd718325229aa9d3e3d67367333fcaa7c267df0cebd251c553832923
name: python3-netifaces
arch: x86_64
version: 0.11.0
epoch: 0
release: 0
summary: Portable network interface information
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-netifaces-0.11.0-0.src.rpm
location_href: x86_64/python3-netifaces-0.11.0-0.x86_64.rpm
checksum_type: sha256
description:
  netifaces provides a (hopefully portable-ish) way for Python programmers to
  get access to a list of the network interfaces on the local machine, and to
  obtain the addresses of those network interfaces.

  The package has been tested on Mac OS X, Windows XP, Windows Vista, Linux and
  Solaris. On Windows, it is currently not able to retrieve IPv6 addresses,
  owing to shortcomings of the Windows API.

  It should work on other UNIX-like systems provided they implement either
  getifaddrs() or support the SIOCGIFxxx socket options, although the data
  provided by the socket options is normally less complete.


pkgId: cd61160df0e4ffae44b6e9ebd5d74794f0a24ec6c4c1640b31b1ae7b0ee40f2e
name: python3-opencv
arch: x86_64
version: 4.7.0
epoch: 0
release: 8
summary: OpenCV Python3 Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: opencv-4.7.0-8.src.rpm
location_href: x86_64/python3-opencv-4.7.0-8.x86_64.rpm
checksum_type: sha256
description:
  The Open Computer Vision Library (Python3) includes various algorithms for computre vision problems.


pkgId: 143b173cfb549f98288197cc9c6752bc5ff5e3788fcd3534a4d575df4dbb86b9
name: python3-pathlib2
arch: x86_64
version: 2.3.7.post1
epoch: 0
release: 0
summary: Object-oriented filesystem paths
rpm_license: MIT
rpm_vendor: tizen
rpm_group: devel/python
rpm_sourcerpm: python3-pathlib2-2.3.7.post1-0.src.rpm
location_href: x86_64/python3-pathlib2-2.3.7.post1-0.x86_64.rpm
checksum_type: sha256
description:
  pathlib2 offers a set of classes to handle filesystem paths in an
  object-oriented fashion. This is a backport of the Python 3.4+ pathlib
  module for older Python versions.


pkgId: 3c596f4f18fdebeee06597cc46ff07ac79956647016b5a4f7f3193e2e72c84ed
name: python3-pycparser
arch: x86_64
version: 2.23
epoch: 0
release: 0
summary: C parser in Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pycparser-2.23-0.src.rpm
location_href: x86_64/python3-pycparser-2.23-0.x86_64.rpm
checksum_type: sha256
description:
  pycparser is a complete parser of the C language, written in pure Python using
  the PLY parsing library. It parses C code into an AST and can serve as a
  front-end for C compilers or analysis tools.


pkgId: 0bb8eeaed50f7dc783054ddf0d5721c1435123205fb0a5ddfbdd7a1203a285df
name: python3-pyproject-metadata
arch: noarch
version: 0.10.0
epoch: 0
release: 0
summary: PEP 621 metadata parsing
url: https://github.com/FFY00/python-pyproject-metadata
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-pyproject-metadata-0.10.0-0.src.rpm
location_href: noarch/python3-pyproject-metadata-0.10.0-0.noarch.rpm
checksum_type: sha256
description:
  Dataclass for PEP 621 metadata with support for core metadata generation.

  This project does not implement the parsing of pyproject.toml containing PEP
  621 metadata.  Instead, given a Python data structure representing PEP 621
  metadata (already parsed), it will validate this input and generate a PEP
  643-compliant metadata file (e.g. PKG-INFO).


pkgId: 606cf3e4f75d449a6a3d0c6210cfe2d1a63d3aa61c2ce2ed1af5a9d057aef271
name: python3-pytest-repeat
arch: noarch
version: 0.9.4
epoch: 0
release: 1
summary: pytest-repeat is a plugin for pytest
rpm_license: MPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pytest-repeat-0.9.4-1.src.rpm
location_href: noarch/python3-pytest-repeat-0.9.4-1.noarch.rpm
checksum_type: sha256
description:
  pytest-repeat is a plugin for pytest that makes it easy to repeat a single test, or multiple tests, a specific number of times.


pkgId: 739fca4e212f520b62fd6d0547ca23d7aac09efc7822c12d590fc4670ed7821f
name: python3-pytz
arch: x86_64
version: 2025.2
epoch: 0
release: 0
summary: World timezone definitions, modern and historical
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-pytz-2025.2-0.src.rpm
location_href: x86_64/python3-pytz-2025.2-0.x86_64.rpm
checksum_type: sha256
description:
  python-tz brings the Olson tz database into Python.
  This library allows accurate and cross platform timezone calculations
  using Python 2.3 or higher. It also solves the issue of ambiguous times
  at the end of daylight savings, which you can read more about in
  the Python Library Reference (datetime.tzinfo).


pkgId: f4f482aa62d39fa2f4342da3b976e17a431e782f8cffda7d8e8f6ceefb8d499e
name: python3-sqlite
arch: x86_64
version: 0.5.4
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: https://github.com/coleifer/pysqlite3
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python3-sqlite-0.5.4-0.src.rpm
location_href: x86_64/python3-sqlite-0.5.4-0.x86_64.rpm
checksum_type: sha256
description:
  Python3 interface to SQLite 3
  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python3 database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 8cb4a67aaef72f29979e3951d0b4b106d841db09438a39a81573e70674956299
name: re2c
arch: x86_64
version: 4.3
epoch: 0
release: 1
summary: Tool for generating C-based recognizers from regular expressions
url: https://re2c.org/
rpm_license: PD
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: re2c-4.3-1.src.rpm
location_href: x86_64/re2c-4.3-1.x86_64.rpm
checksum_type: sha256
description:
  re2c is a tool for writing fast and flexible lexers. Unlike other such
  tools, it concentrates solely on generating efficient code for matching
  regular expressions. This makes it suitable for a wide variety of
  applications. The generated scanners approach hand-crafted ones in
  terms of size and speed.


pkgId: eaaede4c2e0ac1f4652fc712318be58ed7bdc225ea4d4db6a11f06f6817e9ad6
name: rnnoise
arch: x86_64
version: 0
epoch: 0
release: 0.4
summary: Recurrent neural network for audio noise reduction
url: https://gitlab.xiph.org/xiph/rnnoise
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rnnoise-0-0.4.src.rpm
location_href: x86_64/rnnoise-0-0.4.x86_64.rpm
checksum_type: sha256
description:
  RNNoise is a noise suppression library based on a recurrent neural network.

  While it is meant to be used as a library, a simple command-line tool is
  provided as an example. It operates on RAW 16-bit (machine endian) mono PCM
  files sampled at 48 kHz. It can be used as:

  ./examples/rnnoise_demo <noisy speech> <output denoised>

  The output is also a 16-bit raw PCM file.


pkgId: 2e6b3b09121ebbe30988410b9a718503eca51f3dc84bcb2f09cdcfafb88fd2ab
name: rsync
arch: x86_64
version: 3.4.1
epoch: 0
release: 1
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: rsync-3.4.1-1.src.rpm
location_href: x86_64/rsync-3.4.1-1.x86_64.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: a4ae4a53c4d6494f8d2416065ffd48c7b9cdee88b12ebe0ec92d85e65f1a31c0
name: rust
arch: x86_64
version: 1.90.0
epoch: 0
release: 1
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: Apache-2.0 or MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-1.90.0-1.src.rpm
location_href: x86_64/rust-1.90.0-1.x86_64.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: a76f3035474aec0fdfa56deedb2e39228bd64697124b1df189c0458e182260ab
name: rust-cfg-if
arch: x86_64
version: 1.0.0
epoch: 0
release: 1
summary: Macro to ergonomically define an item depending on a large number of #[cfg] parameters
url: https://crates.io/crates/cfg-if
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-cfg-if-1.0.0-1.src.rpm
location_href: x86_64/rust-cfg-if-1.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  Macro to ergonomically define an item depending on a large number of #[cfg]
  parameters. Structured like an if-else chain, the first matching branch is the
  item that gets emitted.


pkgId: 5eb3ebb3c3ddc5dc7e0ebb6eeeae3cff661f5fb5429c4642275de6aa28c1fe0b
name: rust-litrs
arch: x86_64
version: 0.4.0
epoch: 0
release: 1
summary: Parse and inspect Rust literals (i.e
url: https://crates.io/crates/litrs
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-litrs-0.4.0-1.src.rpm
location_href: x86_64/rust-litrs-0.4.0-1.x86_64.rpm
checksum_type: sha256
description:
  Parse and inspect Rust literals (i.e. tokens in the Rust programming language
  representing fixed values). Particularly useful for proc macros, but can also
  be used outside of a proc-macro context.


pkgId: c1832e134811b50348617828da134f38f46e10ab7fe2bcede45f483544c96bc3
name: rust-normalize-line-endings
arch: x86_64
version: 0.3.0
epoch: 0
release: 1
url: https://crates.io/crates/normalize-line-endings
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-normalize-line-endings-0.3.0-1.src.rpm
location_href: x86_64/rust-normalize-line-endings-0.3.0-1.x86_64.rpm
checksum_type: sha256
summary:
  Takes an iterator over chars and returns a new iterator with all line endings (\r, \n, or \r\n) as \n

description:
  Takes an iterator over chars and returns a new iterator with all line endings
  (\r, \n, or \r\n) as \n.


pkgId: b223c0da2da4b2bc9ebbab42d4310bc80c048646eeafdb69575c98418795d552
name: rust-proc-macro2
arch: x86_64
version: 1.0.51
epoch: 0
release: 1
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-proc-macro2-1.0.51-1.src.rpm
location_href: x86_64/rust-proc-macro2-1.0.51-1.x86_64.rpm
checksum_type: sha256
summary:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-based libraries from the procedural macro use case

description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: 186bdbaee3c3fef3305858b4dbef17c3a51aae57ea9495b6262b7dc5db2ff33e
name: rust-regex
arch: x86_64
version: 1.7.1
epoch: 0
release: 1
summary: Implementation of regular expressions for Rust
url: https://crates.io/crates/regex
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-regex-1.7.1-1.src.rpm
location_href: x86_64/rust-regex-1.7.1-1.x86_64.rpm
checksum_type: sha256
description:
  Implementation of regular expressions for Rust. This implementation uses finite
  automata and guarantees linear time matching on all inputs.


pkgId: 02905936c1f0b09e2ddd326e74e973fe02b16b9432c4d525d0ab288ae8ae70a7
name: rust-scopeguard
arch: x86_64
version: 1.1.0
epoch: 0
release: 1
url: https://crates.io/crates/scopeguard
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-scopeguard-1.1.0-1.src.rpm
location_href: x86_64/rust-scopeguard-1.1.0-1.x86_64.rpm
checksum_type: sha256
summary:
  RAII scope guard that will run a given closure when it goes out of scope, even if the code between panics (assuming unwinding panic)

description:
  RAII scope guard that will run a given closure when it goes out of scope, even
  if the code between panics (assuming unwinding panic).
  Defines the macros `defer!`, `defer_on_unwind!`, `defer_on_success!` as
  shorthands for guards with one of the implemented strategies.


pkgId: 095e25c522e0c1e13f94c361138e62f4962a43328aad376b9ac4d25ed03fafd4
name: rust-serde_spanned
arch: x86_64
version: 0.6.1
epoch: 0
release: 1
summary: Native Rust encoder and decoder of TOML-formatted files and streams
url: https://crates.io/crates/serde_spanned
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-serde_spanned-0.6.1-1.src.rpm
location_href: x86_64/rust-serde_spanned-0.6.1-1.x86_64.rpm
checksum_type: sha256
description:
  Native Rust encoder and decoder of TOML-formatted files and streams. Provides
  implementations of the standard Serialize/Deserialize traits for TOML data to
  facilitate deserializing and serializing Rust structures.


pkgId: dee1d7e08388e7963f3cd4a6a4562002d0861d55deb239c33612a4406fd05dc9
name: rust-stable_deref_trait
arch: x86_64
version: 1.2.0
epoch: 0
release: 1
url: https://crates.io/crates/stable_deref_trait
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-stable_deref_trait-1.2.0-1.src.rpm
location_href: x86_64/rust-stable_deref_trait-1.2.0-1.x86_64.rpm
checksum_type: sha256
summary:
  Unsafe marker trait for types like Box and Rc that dereference to a stable address even when moved, and hence can be used with libraries such as owning_ref and rental

description:
  Unsafe marker trait for types like Box and Rc that dereference to a stable
  address even when moved, and hence can be used with libraries such as
  owning_ref and rental.


pkgId: 56ba0060fffa1615cf4d9f5d93c929b80b9e68520e82e4d895d2825478dacf10
name: rust-unicode-ident
arch: x86_64
version: 1.0.6
epoch: 0
release: 1
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-unicode-ident-1.0.6-1.src.rpm
location_href: x86_64/rust-unicode-ident-1.0.6-1.x86_64.rpm
checksum_type: sha256
summary:
  Determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex #31

description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: 3dc726c031ee9f8e21f40079757d7231dcdedea8ee3988830ad7670f1b65fd18
name: rust-version-compare
arch: x86_64
version: 0.1.1
epoch: 0
release: 1
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-version-compare-0.1.1-1.src.rpm
location_href: x86_64/rust-version-compare-0.1.1-1.x86_64.rpm
checksum_type: sha256
summary:
  Rust library to easily compare version numbers with no specific format, and test against various comparison operators

description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: 35241eaca72b22d68cf9a65b0162031fd152df5d19a59d1e62dc38165340227e
name: scons
arch: x86_64
version: 4.4.0
epoch: 0
release: 0
summary: Replacement for Make
url: http://www.scons.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Tools/Building
rpm_sourcerpm: scons-4.4.0-0.src.rpm
location_href: x86_64/scons-4.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  SCons is a make replacement that provides a range of enhanced features,
  such as automated dependency generation and built-in compilation cache
  support. SCons rule sets are Python scripts, which means that SCons
  provides itself as well as the features. SCons allows you to use the
  full power of Python to control compilation.


pkgId: ed739d9f734ad1f11394a0f1e103e7cff88c85d9c8995a2bd8fcc9c9682e6a6e
name: sdbd-profile_tv
arch: x86_64
version: 3.0.50
epoch: 0
release: 0
summary: SDB daemon extension for TV
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sdbd-3.0.50-0.src.rpm
location_href: x86_64/sdbd-profile_tv-3.0.50-0.x86_64.rpm
checksum_type: sha256
description:
  SDB daemon extension for TV.
  This changes the service unit files of the default SDB daemon service files.


pkgId: 0f22f8dfd8fffb970b00aa10f4e14e021c88018bb4747499709a6f97f0f84da3
name: security-privilege-manager
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.


pkgId: 8e938ea4e74c4f7f098b4d36191c415a63add6025a921df9bfb161d4081aa969
name: security-privilege-manager-extension-iot
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen IoT profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-iot-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen IoT profile,
  which requires security-profile-manger to be installed before this.


pkgId: cef30c92a66b375f0f4afb27926a727d65714ff72880e824cbb9f5b5780717f0
name: security-privilege-manager-extension-mobile
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Mobile profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-mobile-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Mobile profile,
  which requires security-profile-manger to be installed before this.


pkgId: 1f7ebd6ec3a55e3ac7f124a152049fc21e63a579695671f9d8eac27d3b7a0457
name: security-privilege-manager-extension-tv
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen TV profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-tv-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen TV profile,
  which requires security-profile-manger to be installed before this.


pkgId: c971763a66af5d4996c1342d2be8d0fa8e4c3636ee26833bf182af97ea6758b6
name: security-privilege-manager-extension-wearable
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Wearable profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-wearable-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Wearable profile,
  which requires security-profile-manger to be installed before this.


pkgId: e3fdd3166d8a45d53268fd48038f6657fd1bd742217249d72c9e11fa58d70bdb
name: sensord
arch: x86_64
version: 10.0.0
epoch: 0
release: 1
summary: Sensor daemon
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: x86_64/sensord-10.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the fully functional internal API library and the service daemon
  of the Sensor Framework. The library replaces the dummy library installed by sensord-dummy.


pkgId: 5b2fa707bb55f11152a7a0495f086b2a4a4fbf9ea9afd767ab21e7556b95c40a
name: sensord-dummy
arch: x86_64
version: 10.0.0
epoch: 0
release: 1
summary: Sensor Framework 'dummy' library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: x86_64/sensord-dummy-10.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the dummy library of the sensor internal API.
  Installing sensord replaces this dummy library with the actually functional library.


pkgId: 6273e54cae5dc4b51d503fd15386e7679f071b6eaab6418a932fea579df405d1
name: sgml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/sgml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: 4ca4dc85a627a9c2567650e7f96aa568ff6fc4a35e8e56c1e9c157472fff2e6d
name: shared-mime-info
arch: x86_64
version: 1.7
epoch: 0
release: 0
summary: Shared MIME Database
url: http://freedesktop.org/wiki/Software/shared-mime-info
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Configuration
rpm_sourcerpm: shared-mime-info-1.7-0.src.rpm
location_href: x86_64/shared-mime-info-1.7-0.x86_64.rpm
checksum_type: sha256
description:
  This package contains:

  - The freedesktop.org shared MIME database spec.

  - The merged GNOME and KDE databases, in the new format.

  - The update-mime-database command, used to install new MIME data.


pkgId: ef3c4cf075a0f8c87c29f08910abeec9939ecb47b4bbc361d6afa7f756e77367
name: snappy-devel
arch: x86_64
version: 1.1.7
epoch: 0
release: 0
summary: Development files for snappy
url: https://github.com/google/snappy/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: snappy-1.1.7-0.src.rpm
location_href: x86_64/snappy-devel-1.1.7-0.x86_64.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
  compresses at about 250 MB/sec or more and decompresses at about
  500 MB/sec or more.

  This package holds the development files for snappy.


pkgId: a61456fc4fb058825cf6ea57cd9ea7e4688c341db018fa69811055ebba71d60b
name: soundtouch
arch: x86_64
version: 2.1.0
epoch: 0
release: 0
summary: Audio processing library
url: https://gitlab.com
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: soundtouch-2.1.0-0.src.rpm
location_href: x86_64/soundtouch-2.1.0-0.x86_64.rpm
checksum_type: sha256
description:
  Soundtouch is an audio processing library that allows changing
  the sound tempo, pitch and playback rate parameters independently from eash other.


pkgId: 623de35d81d18bfcd50a2a985b6b6987a1088e57b5ec20467b8079233003df5d
name: sqlcipher
arch: x86_64
version: 4.6.1
epoch: 0
release: 0
url: https://github.com/sqlcipher/sqlcipher
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Security/Crypto Libraries
rpm_sourcerpm: sqlcipher-4.6.1-0.src.rpm
location_href: x86_64/sqlcipher-4.6.1-0.x86_64.rpm
checksum_type: sha256
summary:
  SQLCipher is an open source extension to SQLite that provides transparent 256-bit AES encryption of database files

description:
  SQLCipher is an open source library that provides transparent, secure 256-bit
  AES encryption of SQLite database files. SQLCipher has been adopted as a secure
  database solution by many commercial and open source products, making it one of
  the most popular encrypted database platforms for Mobile, Embedded, and Desktop
  applications.


pkgId: b9e213b1b8daa5bf418a2f3c3aea222b89c7ee16e27dda29a60f877437ffde34
name: ssat
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Shell Script Automated Tester
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: ssat-1.4.0-0.src.rpm
rpm_packager: MyungJoo Ham <myungjoo.ham@samsung.com>
location_href: x86_64/ssat-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  SSAT provides testing environment for shell scripts with Apache-2.0 license.
  This is created to avoid any complications related with GPL licenses.


pkgId: 9d820cda0bedae04a57f01af68b6c8a1b63e9e5290cf8c1a9f8e0cf05d7f9a8d
name: sshfs
arch: x86_64
version: 2.10
epoch: 0
release: 0
summary: A network filesystem client to connect to SSH servers
url: https://github.com/libfuse/sshfs
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Base/File Systems
rpm_sourcerpm: sshfs-2.10-0.src.rpm
location_href: x86_64/sshfs-2.10-0.x86_64.rpm
checksum_type: sha256
description:
  SSHFS (Secure SHell FileSystem) allows you to mount a remote filesystem
  using SFTP. Now that most SSH servers support and enable this SFTP access
  by default, the SSHFS is very simple to use. It means that there is nothing
  to do on the server-side. Note that SSHFS requires FUSE (Filesystem in
  USErspace) filesystem, that lets non-privileged users create own file systems
  without editing Linux kernel code.


pkgId: 1752ea503d77748e94e88eb8cd55a457d61e8d6cb56530eed63239d0761947cf
name: strace
arch: x86_64
version: 6.6
epoch: 0
release: 0
summary: A utility to trace the system calls of a program
url: http://sourceforge.net/projects/strace/
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: strace-6.6-0.src.rpm
location_href: x86_64/strace-6.6-0.x86_64.rpm
checksum_type: sha256
description:
  With strace, you can trace the activity of a program.  Information
  about any system calls the program makes and the signals it receives
  and processes can be seen.  Child processes can also be tracked.


pkgId: c8c894ef88027629b5473630726d05f8e412b97b8aec59694cd7f1e46e6ef1ad
name: sudo
arch: x86_64
version: 1.9.17p2
epoch: 0
release: 0
summary: Execute some commands as root
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: x86_64/sudo-1.9.17p2-0.x86_64.rpm
checksum_type: sha256
description:
  Sudo is a command that allows users to execute some commands as root.
  The /etc/sudoers file (edited with 'visudo') specifies which users have
  access to sudo and which commands they can run. Sudo logs all its
  activities to syslogd, so the system administrator can keep an eye on
  things. Sudo asks for the password for initializing a check period of a
  given time N (where N is defined at installation and is set to 5
  minutes by default).


pkgId: 3284e8b5e2530c672f39f77e1a9b70903d0d965dccca73b832309745b3d71bc8
name: sudo-rpm
arch: x86_64
version: 1.9.17p2
epoch: 0
release: 0
summary: Script making possible to run RPM as root from inside build
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: x86_64/sudo-rpm-1.9.17p2-0.x86_64.rpm
checksum_type: sha256
description:
  The package will add ALL ALL = (root) NOPASSWD: /usr/bin/rpm to sudoers and
  makes possible to install packages from inside build.


pkgId: 1ac2209ce5a48b104ed6083376f035587e69fd35c103b668c22f61413b1c6b3d
name: swig
arch: x86_64
version: 4.0.2
epoch: 0
release: 0
summary: Simplified Wrapper and Interface Generator
url: http://www.swig.org/
rpm_license: GPL-3.0+ and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/C and C++
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: x86_64/swig-4.0.2-0.x86_64.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.


pkgId: afdeb99e65df2625b4f683fa9f2c51189587f2784feb230d1ca32b47ed36c1a2
name: swig-doc
arch: noarch
version: 4.0.2
epoch: 0
release: 0
summary: SWIG Manual
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Man
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: noarch/swig-doc-4.0.2-0.noarch.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains the SWIG manual.


pkgId: 14256030ce20af2e39b52b7abd2464a9ccca2ac4ec366bdd1eb92e262da6b844
name: swig-examples
arch: x86_64
version: 4.0.2
epoch: 0
release: 0
summary: SWIG example files
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Howto
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: x86_64/swig-examples-4.0.2-0.x86_64.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains SWIG examples, useful both for testing and
  understandig SWIG usage.


pkgId: 529f52b7ecdd64f375a61297ad0da2244a3027ace6e4b97e5c7b3863e86adb39
name: sysprof-cli
arch: x86_64
version: 1.2.0
epoch: 0
release: 0
summary: Sampling CPU profiler (CLI)
url: http://sysprof.com/
rpm_license: GPL v2 or later
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: sysprof-1.2.0-0.src.rpm
location_href: x86_64/sysprof-cli-1.2.0-0.x86_64.rpm
checksum_type: sha256
description:
  Sysprof is a sampling CPU profiler for Linux.
  This package contains the command-line data-collection part only.


pkgId: 6291009efd3778578bc7c96514d4404b713d9dffe1651d6ad36f787f84c5c87c
name: system-rw-update
arch: x86_64
version: 1.3.0
epoch: 0
release: 0
summary: System RW Update Manager
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: system-rw-update-1.3.0-0.src.rpm
location_href: x86_64/system-rw-update-1.3.0-0.x86_64.rpm
checksum_type: sha256
description:
  System RW update manager provides interface for running platform/application update scripts
  after software is updated to new version which is implemented by using systemd offline update.


pkgId: 7e2d661fbac6b3517665435539ab5f49f5f3fb7dbfcbf433f0f263ad79adbbaf
name: system-servant-profile_common
arch: x86_64
version: 0.2.2
epoch: 0
release: 1
summary: System-servant configured for common profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: system-servant-0.2.2-1.src.rpm
location_href: x86_64/system-servant-profile_common-0.2.2-1.x86_64.rpm
checksum_type: sha256
description:
  System-popup (system-servant) configured for common profile.
  The binary is shared between common/tv.


pkgId: c1b25cdbac6369c1a4e2b42bf71c01dcfa4cd3867a3b61382a44a62ba37b30c1
name: systemd
arch: x86_64
version: 244
epoch: 0
release: 0
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-244-0.x86_64.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: ee504cfbac260dcdfb694fe546d6c171fe84b9d32848e5b2e8cd624ed5275f98
name: systemd-analyze
arch: x86_64
version: 244
epoch: 0
release: 0
summary: Tool for processing systemd profiling information
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-analyze-244-0.x86_64.rpm
checksum_type: sha256
description:
  'systemd-analyze blame' lists which systemd unit needed how much time to finish
  initialization at boot.
  'systemd-analyze plot' renders an SVG visualizing the parallel start of units
  at boot.


pkgId: b02c052f617245a165376e21b1926aa064627c2eb03769c49d1d40f53ebe81ba
name: systemd-tests
arch: x86_64
version: 244
epoch: 0
release: 0
summary: Set of tests for sd-bus component
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and BSD-2-Clause
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-tests-244-0.x86_64.rpm
checksum_type: sha256
description:
  This package is part of 'dbus-integratnion-tests' framework and contains set of tests
  for sd-bus component (DBUS API C library).


pkgId: 760fc40e6fc863a037134c0bf252f17a77f2e5d0edc21ea3de3371da68b5218b
name: sz2-devel
arch: x86_64
version: 1.0.1
epoch: 0
release: 0
summary: Development files for libsz2
url: https://gitlab.dkrz.de/k202009/libaec
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: libaec-1.0.1-0.src.rpm
location_href: x86_64/sz2-devel-1.0.1-0.x86_64.rpm
checksum_type: sha256
description:
  Header files for libsz2, a drop-in replacement for the
  SZIP library (http://www.hdfgroup.org/doc_resource/SZIP).


pkgId: c6aaaa8e1e73cc41dd205e1a0b90811c7adfbd8f7898475130a53de2f34dd2b9
name: tayga
arch: x86_64
version: 0.9.2
epoch: 0
release: 1
summary: Simple, no-fuss NAT64 for Linux
url: http://www.litech.org/tayga/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: tayga-0.9.2-1.src.rpm
location_href: x86_64/tayga-0.9.2-1.x86_64.rpm
checksum_type: sha256
description:
  TAYGA is an out-of-kernel stateless NAT64 implementation for Linux that uses
  the TUN driver to exchange IPv4 and IPv6 packets with the kernel.
  It is intended to provide production-quality NAT64 service for networks
  where dedicated NAT64 hardware would be overkill.


pkgId: 134e4f3e07ec21b6162d92d5401edfcb12e324f3fea2361533d543ef4f2cf192
name: tcpdump
arch: x86_64
version: 4.9.3
epoch: 0
release: 1
summary: A Packet Sniffer
url: http://www.tcpdump.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Productivity/Networking/Diagnostic
rpm_sourcerpm: tcpdump-4.9.3-1.src.rpm
location_href: x86_64/tcpdump-4.9.3-1.x86_64.rpm
checksum_type: sha256
description:
  This program can "read" all or only certain packets going over the
  ethernet. It can be used to debug specific network problems.


pkgId: e8f2ae855d3ecd7d4f9e4dd4f0273ee6b7d149822f8434ff70cc48d5fcc5118e
name: tidl-action-toolchain
arch: x86_64
version: 2.9.1
epoch: 0
release: 1
summary: Tizen Action toolchain for TIDL
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Building
rpm_sourcerpm: tidl-2.9.1-1.src.rpm
location_href: x86_64/tidl-action-toolchain-2.9.1-1.x86_64.rpm
checksum_type: sha256
description:
  Tizen Action toolchain utilities for converting .action and .entity schemas
  to TIDL and generating service stubs through tidlc.


pkgId: d3e075c25db3d90018cee354319acf72f1ce1e82687c026945a6782491fb2729
name: tizen-debug
arch: x86_64
version: 2.40
epoch: 0
release: 1
summary: libc debug information with .debug_frame section only and ld debug information
rpm_license: LGPL-2.1+ and LGPL-2.1+-with-GCC-exception and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tizen-debug-2.40-1.src.rpm
location_href: x86_64/tizen-debug-2.40-1.x86_64.rpm
checksum_type: sha256
description:
  The package contains the libc.so debug library with .debug_frame section only
  which can be helpful during signal frame backtrace.
  Also, the ld.so debug information is included for the debugging convenience.


pkgId: d4e1ccb716095b4c374e6b4ed6b08196d15c55ec3d55d0ade76b90597f837f83
name: tlm
arch: x86_64
version: 1.0.3
epoch: 0
release: 1
summary: Login manager for Tizen
url: https://github.com/01org/tlm
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Service
rpm_sourcerpm: tlm-1.0.3-1.src.rpm
location_href: x86_64/tlm-1.0.3-1.x86_64.rpm
checksum_type: sha256
description:
  TLM is a daemon that handles user logins in a multi-user, multi-seat system by
  authenticating the users through PAM, and setting up, launching, and tracking
  user sessions.


pkgId: e480186db3b918f9c3afc71e609b1940c86476724e727ddbcebad4b5151739ba
name: tolua++
arch: x86_64
version: 1.0.93
epoch: 0
release: 0
summary: C/C++ with Lua Integration Tool
url: http://www.codenix.com/~tolua/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tolua++-1.0.93-0.src.rpm
location_href: x86_64/tolua++-1.0.93-0.x86_64.rpm
checksum_type: sha256
description:
  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to c++ such as:
  * support for std::string as a basic type (this can be turned off by a command
    line option)
  * support for class templates
  as well as other features and bugfixes.


pkgId: 63c1a2638dca8e58c5e74de6d14908bb8da7f10ed1d5e405146e673c702b31bb
name: toybox
arch: x86_64
version: 0.6.0
epoch: 0
release: 1
summary: Single binary providing simplified versions of system commands
url: http://www.landley.net/toybox/
rpm_license: BSD-2.0
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: toybox-0.6.0-1.src.rpm
location_href: x86_64/toybox-0.6.0-1.x86_64.rpm
checksum_type: sha256
description:
  Toybox is a single binary which includes versions of a large number
  of system commands, including a shell.  This package can be very
  useful for recovering from certain types of system failures,
  particularly those involving broken shared libraries.


pkgId: 72522afc59680f79542a96623585a9c00e2c486e94ad98594fc1c78a4c0c9c77
name: trust-anchor
arch: x86_64
version: 2.1.2
epoch: 0
release: 0
summary: Trust Anchor API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Certificate Management
rpm_sourcerpm: trust-anchor-2.1.2-0.src.rpm
location_href: x86_64/trust-anchor-2.1.2-0.x86_64.rpm
checksum_type: sha256
description:
  The package provides trust-anchor which the application can assign
  SSL root certificates for its HTTPS communication.


pkgId: c49fa6f1ba27fd840faf452a67e9421b72a8e9959f021c80fbee529145ab1241
name: tvm-runtime
arch: x86_64
version: 0.7.0
epoch: 0
release: 0
summary: TVM Runtime Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: tvm-runtime-0.7.0-0.src.rpm
location_href: x86_64/tvm-runtime-0.7.0-0.x86_64.rpm
checksum_type: sha256
description:
  Apache TVM is a compiler stack for deep learning systems. It is designed to close the gap between the productivity-focused deep learning frameworks, and the performance- and efficiency-focused hardware backends. TVM works with deep learning frameworks to provide end to end compilation to different backends.


pkgId: dd6516e2173607b44d6622bd15aa1028afcc03dd917987fc128e106f7ff2c4a2
name: typelib-1_0-Atspi-2_0
arch: x86_64
version: 2.44.1
epoch: 0
release: 1
summary: An Accessibility ToolKit -- Introspection bindings
url: http://www.gnome.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: at-spi2-core-2.44.1-1.src.rpm
location_href: x86_64/typelib-1_0-Atspi-2_0-2.44.1-1.x86_64.rpm
checksum_type: sha256
description:
  AT-SPI is a general interface for applications to make use of the
  accessibility toolkit. This version is based on dbus.

  This package provides the GObject Introspection bindings for the
  libatspi library.


pkgId: ce2a6b14eed50c1cce180cd6ca758be13e894ad342b68b5050b0a058edbf93d9
name: typelib-Json
arch: x86_64
version: 1.8.0
epoch: 0
release: 0
summary: Introspection bindings for libjson-glib
url: https://wiki.gnome.org/Projects/JsonGlib
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: json-glib-1.8.0-0.src.rpm
location_href: x86_64/typelib-Json-1.8.0-0.x86_64.rpm
checksum_type: sha256
description:
  JSON-GLib provides a parser and a generator GObject classes and various
  wrappers for the complex data types employed by JSON, such as arrays
  and objects.

  This package provides the GObject Introspection bindings for JSON-GLib.


pkgId: b2d72b9b976034d74da8a2a51c8120a410f06da39c2044666d7f88687f7b2367
name: typelib-Soup
arch: x86_64
version: 2.72.0
epoch: 0
release: 1
summary: HTTP client/server library for GNOME -- Introspection bindings
url: http://www.gnome.org
rpm_license: LGPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: libsoup-2.72.0-1.src.rpm
location_href: x86_64/typelib-Soup-2.72.0-1.x86_64.rpm
checksum_type: sha256
description:
  Libsoup is an HTTP client/server library for GNOME. It uses GObjects
  and the glib main loop, to integrate well with GNOME applications.

  This package provides the GObject Introspection bindings for libsoup.


pkgId: dc5a4b9201cdba2780c8961612925cf327b2806a468ad47bd12fe01135e5d232
name: united-service
arch: x86_64
version: 1.3.2
epoch: 0
release: 0
summary: United Service
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: App Framework/Application Core
rpm_sourcerpm: united-service-1.3.2-0.src.rpm
location_href: x86_64/united-service-1.3.2-0.x86_64.rpm
checksum_type: sha256
description:
  United service is to integrate multiple currently independent daemons into one process
  to improve management efficiency, optimize resource usage, and ensure consistency between services.


pkgId: faf1ad86159ec6061f84636f402ce38736a3e272c54ddfac31d1b5e3933f1356
name: update-desktop-files
arch: noarch
version: 12.1
epoch: 0
release: 0
summary: A Build Tool to Update Desktop Files
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: update-desktop-files-12.1-0.src.rpm
location_href: noarch/update-desktop-files-12.1-0.noarch.rpm
checksum_type: sha256
description:
  This package provides further translations and a shell script to update
  desktop files. It is used by the %tizen_update_desktop_file rpm macro.


pkgId: 51c98714d91d371ea98a888976fccbabafe87cae3ce3ae3b87966d887d11b148
name: upgrade-parse-dynparts
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Utility needed to parse dynamic partition on-disk format
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-parse-dynparts-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides utility needed to parse "super" on-disk format, and print
  out necessary device mapper maps, needed to later mount filesystems contained in
  dynamic partition area.


pkgId: c842edd782466ee921b5007b85434778df6eddd8410d6d9bdb63106ffad66d9b
name: upgrade-resize-dynparts
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Utility for modification of dynamic partitions size in super metadata
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-resize-dynparts-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides utility needed to modify metadata of a super partition by
  changing size of dynamic partitions.


pkgId: 68b87f9e76e2b7279018871c6febebd3c5a4f7ac00cd0c489720347e73a463f5
name: upgrade-ro
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Contains all necessary tools to perform RO Upgrade
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-ro-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  Update engine adding all necessary tools, scripts and configuration
  for updating Tizen platform images using delta files as generated by
  upgrade-tools.


pkgId: 5392497a1e3c103288d050c2394d522ffef217cf6a1bd0e25662b28c35d9414b
name: valgrind
arch: x86_64
version: 3.25.0
epoch: 0
release: 0
summary: Memory Management Debugger
url: http://valgrind.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: valgrind-3.25.0-0.src.rpm
location_href: x86_64/valgrind-3.25.0-0.x86_64.rpm
checksum_type: sha256
description:
  Valgrind checks all memory operations in an application, like read,
  write, malloc, new, free, and delete. Valgrind can find uses of
  uninitialized memory, access to already freed memory, overflows,
  illegal stack operations, memory leaks, and any illegal
  new/malloc/free/delete commands. Another program in the package is
  "cachegrind," a profiler based on the valgrind engine.

  To use valgrind you should compile your application with "-g -O0"
  compiler options. Afterwards you can use it with:

  valgrind --tool=memcheck --sloppy-malloc=yes --leak-check=yes
  --db-attach=yes my_application, for example.

  More valgrind options can be listed via "valgrind --help". A
  debugged application runs slower and needs much more memory, but
  is usually still usable. Valgrind is still in development, but it
  has been successfully used to optimize several KDE applications.


pkgId: c1456788af0aebbb0f4b516215c4a190bc8ef5299ca9bffe80dacea8764ad922
name: vconf-internal-keys-config-profile_common
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for common
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_common-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for common
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 9760c6ce08755fa78b2c63d325e477d62f6ca983c13e5e1cb09430195f07913d
name: vconf-internal-keys-config-profile_ivi
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for ivi
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_ivi-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for ivi
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 28f8f2321f0c3a56e89ca05a6d7d68753c62e9c4376fdc5a744f7819b429f377
name: vconf-internal-keys-config-profile_mobile
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for mobile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_mobile-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for mobile.
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: c61874a1a1a64aae2a62f65fac1e3557140d7079a1de2e933324e846364a4961
name: vconf-internal-keys-config-profile_tv
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for tv
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_tv-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for tv
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 8e2d41734c397be4577fafdbea9f85e46c9130f3c42d793b3fd147cb719464c0
name: vconf-internal-keys-config-profile_wearable
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for wearable
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_wearable-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for wearable
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 9e1ba964f95da059d93d95abf83b72fbea323fb0de03974862afc17d5b48983b
name: verity-tools
arch: x86_64
version: 2.3
epoch: 0
release: 1
summary: A tool for dm-verity
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: initrd-2.3-1.src.rpm
location_href: x86_64/verity-tools-2.3-1.x86_64.rpm
checksum_type: sha256
description:
  verityctl tool for dm-verity. Similar with veritysetup of cryptsetup
  but it can handle with verity meta data block.


pkgId: 37af93e02c1ddfa0aba5f75ad04c1847d258421b5a18d9911e44930ca45dd130
name: vi
arch: x86_64
version: 050325
epoch: 0
release: 1
summary: The Traditional Vi
url: http://ex-vi.sourceforge.net/
rpm_license: BSD-4-Clause-UC and BSD-4-Clause-Caldera
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: vi-050325-1.src.rpm
location_href: x86_64/vi-050325-1.x86_64.rpm
checksum_type: sha256
description:
  Compared to most of its many clones, the traditional vi is a rather small
  program just with its extremely powerful editing interface, but lacking fancy
  features like multiple undo, multiple screens, or syntax highlighting.
  This port of vi has generally preserved the original style, terminal control,
  and feature set. It adds support for international character sets, including
  multibyte encodings such as UTF-8, and some minor enhancements that were not
  present in BSD vi 3.7, but had been included in later vi versions for System V
  or in POSIX.2.


pkgId: fcfaf970aa59075c38f68c77463c1d47bd3dabf7eacb77d9b15521fc5db125cb
name: vpx-tools
arch: x86_64
version: 1.12.0
epoch: 0
release: 2
summary: VP8 codec library - Utilities
url: http://www.webmproject.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: libvpx-1.12.0-2.src.rpm
location_href: x86_64/vpx-tools-1.12.0-2.x86_64.rpm
checksum_type: sha256
description:
  This package contains utilities around the vp8 codec sdk.

  WebM is an open, royalty-free, media file format designed for the web.

  WebM defines the file container structure, video and audio formats.
  WebM files consist of video streams compressed with the VP8 video codec
  and audio streams compressed with the Vorbis audio codec.
  The WebM file structure is based on the Matroska container.


pkgId: a7555e683457385106188973da9ff8200517c59c0bf1572972b46405e4d39a99
name: vulkan-loader-devel
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-loader
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-loader-1.3.296-0.src.rpm
location_href: x86_64/vulkan-loader-devel-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  The vulkan-loader-devel package contains libraries and header files for
  developing applications that use vulkan-loader.


pkgId: 8cd40511cf1441ad15a2ba6e29b5605df235be377f5a91f9b687778448605e0d
name: vulkan-utility-libraries
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Vulkan utility libraries
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-utility-libraries-1.3.296-0.src.rpm
location_href: x86_64/vulkan-utility-libraries-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  This repo was created to share code across various Vulkan repositories,
  solving long standing issues for Vulkan SDK developers and users.


pkgId: 8666ca9cb4072e81cacd0ac7f62822f9d67cacc3cede61906a9b063fb180852e
name: vulkan-validation-layers-devel
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-validation-layers
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-validation-layers-1.3.296-0.src.rpm
location_href: x86_64/vulkan-validation-layers-devel-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  The vulkan-validation-layers-devel package contains libraries and header files for
  developing applications that use vulkan-validation-layers.


pkgId: 9ff78200d231ce22737f7f6aab285c8bca0f53ebfaff937dd664369772bc3f1d
name: wayland-devel
arch: x86_64
version: 1.23.1
epoch: 0
release: 0
summary: Development files for the Wayland Compositor Infrastructure
url: http://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-1.23.1-0.src.rpm
location_href: x86_64/wayland-devel-1.23.1-0.x86_64.rpm
checksum_type: sha256
description:
  Wayland is a protocol for a compositor to talk to its clients as well
  as a C library implementation of that protocol. The compositor can be
  a standalone display server running on Linux kernel modesetting and
  evdev input devices, an X application, or a wayland client itself.
  The clients can be traditional applications, X servers (rootless or
  fullscreen) or other display servers.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 811c1f7ad3759a75f0ae305254ddc3cacb465f0723eaee92a120da6312a99abe
name: wayland-extension-client-devel
arch: x86_64
version: 1.3.84
epoch: 0
release: 0
summary: Client development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.84-0.src.rpm
location_href: x86_64/wayland-extension-client-devel-1.3.84-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 47a77bcd9230650f070a7b2e083cb185188fc342650ca806ccff6bb86d956dfd
name: wayland-extension-server-devel
arch: x86_64
version: 1.3.84
epoch: 0
release: 0
summary: Server development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.84-0.src.rpm
location_href: x86_64/wayland-extension-server-devel-1.3.84-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop a compositor that require these.


pkgId: 003c0b4cb9d4226155dded27822463cd4c4a31ebff9327436c37ce7a166ab321
name: wayland-protocols
arch: x86_64
version: 1.3.84
epoch: 0
release: 0
summary: Wayland upstream protocols
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.84-0.src.rpm
location_href: x86_64/wayland-protocols-1.3.84-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland upstream protocols that add functionality not available in the Wayland core protocol


pkgId: 206a0ffac51cbe5cca4c1517497d95dbf34840c464397757171c9cfd74dda044
name: wdiff
arch: x86_64
version: 1.2.2
epoch: 0
release: 1
summary: Display Word Differences Between Text Files
url: https://ftp.gnu.org/gnu/wdiff/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Productivity/Text/Utilities
rpm_sourcerpm: wdiff-1.2.2-1.src.rpm
location_href: x86_64/wdiff-1.2.2-1.x86_64.rpm
checksum_type: sha256
description:
  wdiff compares two files and finds which words have been deleted or
  added to old_file to get new_file. A word is considered to be anything
  between whitespace.

  Xwdiff is a handy X Window System front-end, based on Tcl/Tk.


pkgId: d6c74f3bead183a7625d1df9f35d2252ab391f1167050a40b1659af1747ad2b5
name: webauthn-ble-manual-tests
arch: x86_64
version: 1.0.8
epoch: 0
release: 1
summary: Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Development
rpm_sourcerpm: webauthn-ble-1.0.8-1.src.rpm
location_href: x86_64/webauthn-ble-manual-tests-1.0.8-1.x86_64.rpm
checksum_type: sha256
description:
  Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
  The webauthn-manual-tests required to use webauthn-image-viewer


pkgId: e8a2d99064aa66c63e128b25a831304f5feb00abe7081cd5630220a0a8112a6b
name: webrtc-audio-processing
arch: x86_64
version: 0.3.1
epoch: 0
release: 2
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: x86_64/webrtc-audio-processing-0.3.1-2.x86_64.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: 24137ff5ba9db2e49f7107fcbce65413392209c8b7f1f0f259c679a988ea322a
name: webrtc-audio-processing-devel
arch: x86_64
version: 0.3.1
epoch: 0
release: 2
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: x86_64/webrtc-audio-processing-devel-0.3.1-2.x86_64.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: 706a91fbdaf976653b914882ce36303cb7265d08f56289bc3424221feb7cf224
name: wireless-regdb
arch: x86_64
version: 2013.01.11
epoch: 0
release: 0
summary: Linux wireless regulatory database
url: http://wireless.kernel.org/en/developers/Regulatory/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: wireless-regdb-2013.01.11-0.src.rpm
location_href: x86_64/wireless-regdb-2013.01.11-0.x86_64.rpm
checksum_type: sha256
description:
  This package contains the wireless regulatory database used by all
  cfg80211 based Linux wireless drivers. The wireless database being
  used is maintained by John Linville, the Linux wireless kernel maintainer
  http://wireless.kernel.org/en/developers/Regulatory/


pkgId: 9e94b06054b8a5f35ac68f68cbec1bde44344e59ae07b90dc1329839a82ef2d8
name: wpa_supplicant
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: WPA supplicant implementation
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  wpa_supplicant is an implementation of the WPA Supplicant component,
  i.e., the part that runs in the client stations. It implements key
  negotiation with a WPA Authenticator and it controls the roaming and
  IEEE 802.11 authentication/association of the wlan driver.


pkgId: 971e7a32662191d77d201a87bf19e6a3d52236337b8d3bfa14025ffc36e77809
name: wpa_supplicant-client_tool
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Text-based client tool for wpa_supplicant and hostapd
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-client_tool-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Text-based frontend programs for interacting with wpa_supplicant and hostapd.
  It is used to query current status, change configuration,
  trigger events, and request interactive user input.


pkgId: 4574d49ef8d851c3dc7123c858b7aa5dff5a82546b2a647c36d7c9dd454c5753
name: wpa_supplicant-extension-TM1
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM1
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-extension-TM1-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting SPRD-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: ef521c3d4064a6f56bb33c2a3c3800509d4cac889603665792be6821034111d0
name: wpa_supplicant-extension-TM2
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM2
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-extension-TM2-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting BROADCOM-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: afe9f02f6fb144219836d11c9ec7cb932e23f4691e4117d6c0cb1091e6c7487a
name: wpa_supplicant-profile_tv
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Patched wpa_supplicant for TV
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-profile_tv-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  TV-profile somehow wants to disable WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE
  unconditionally at wpa_supplicant/wpa_supplicant.c. It should later be
  determined at runtime/boottime, not at buildtime.


pkgId: 1c9aa70ea747bdce561df974755cb46f662fa23fb58b1c5250185a23e4e97104
name: xdelta3
arch: x86_64
version: 3.0.11
epoch: 0
release: 1
summary: The xdelta3
url: http://xdelta.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: xdelta3-3.0.11-1.src.rpm
location_href: x86_64/xdelta3-3.0.11-1.x86_64.rpm
checksum_type: sha256
description:
  Xdelta3 is a set of tools designed to compute changes between
  binary files.  These changes (delta files) are similar to the output of the
  "diff" program, in that they may be used to store and transmit only the
  changes between files.  The "delta files" that Xdelta3 manages are
  stored in RFC3284 (VCDIFF) format.


pkgId: 5a2d2b7690910deee4ede98a0291419f62ebdbf2bdbf45b3d52eb03aba7045e0
name: xkeyboard-config
arch: x86_64
version: 2.13
epoch: 0
release: 0
summary: The X Keyboard Extension
url: http://www.freedesktop.org/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: xkeyboard-config-2.13-0.src.rpm
location_href: x86_64/xkeyboard-config-2.13-0.x86_64.rpm
checksum_type: sha256
description:
  The X Keyboard Extension essentially replaces the core protocol
  definition of keyboard. The extension makes possible to clearly and
  explicitly specify most aspects of keyboard behaviour on per-key basis
  and to more closely track the logical and physical state of the
  keyboard. It also includes a number of keyboard controls designed to
  make keyboards more accessible to people with physical impairments.


pkgId: 51dcd3378d71439873a889a1dacd45c62bccbf6c298fd5ff52478e8bab312511
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common XML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/xml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The xml-common is a subpackage of sgml-common which contains
  a collection XML catalogs that are useful for processing XML,
  but that don't need to be included in main package.


pkgId: 883dea28dc2bc82f7d0789b0d52bdb2a5799783c11284830aa59c11d9ff337bf
name: xmlto
arch: x86_64
version: 0.0.28
epoch: 0
release: 0
summary: Tool for Converting XML Files to Various Formats
url: https://fedorahosted.org/xmlto/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Productivity/Publishing/XML
rpm_sourcerpm: xmlto-0.0.28-0.src.rpm
location_href: x86_64/xmlto-0.0.28-0.x86_64.rpm
checksum_type: sha256
description:
  This is a package for converting XML files to various formats using XSL
  stylesheets.  As a processor it depends on xsltproc and as a formatter
  for print output it makes use of passivetex.


pkgId: dba33547e870c81613b5d912e91bd020419b67e6220bb4929edb8cf4883e2e69
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 0
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: yum-3.4.3-0.src.rpm
location_href: noarch/yum-3.4.3-0.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: e15dec70f352f326e4f3be0fe6393c789e6ee4c90a1604b1dd8862e07e5977f1
name: zbar
arch: x86_64
version: 0.10
epoch: 0
release: 23
summary: Bar code reader
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: x86_64/zbar-0.10-23.x86_64.rpm
checksum_type: sha256
description:
  A layered barcode scanning and decoding library. Supports EAN, UPC, Code 128,
  Code 39 and Interleaved 2 of 5.
  Includes applications for decoding captured barcode images and using a video
  device (eg, webcam) as a barcode scanner.


pkgId: a14aab1fdb7c9136c081fc2f7a7ccb5251a7aa50250ab83a6d44af92cb13671f
name: zbar-devel
arch: x86_64
version: 0.10
epoch: 0
release: 23
summary: Bar code library extra development files
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: x86_64/zbar-devel-0.10-23.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files and additional libraries used for
  developing applications that read bar codes with this library.


pkgId: b1af037bcde6ff08fbaa93873ae1080ca5bf2638df7a03e4968615ef57f86a94
name: zint
arch: x86_64
version: 2.6.7
epoch: 0
release: 2
summary: Barcode generator library
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: x86_64/zint-2.6.7-2.x86_64.rpm
checksum_type: sha256
description:
  Zint is a C library for encoding data in several barcode variants. The
  bundled command-line utility provides a simple interface to the library.
  Features of the library:
  - Over 50 symbologies including all ISO/IEC standards, like QR codes.
  - Unicode translation for symbologies which support Latin-1 and
    Kanji character sets.
  - Full GS1 support including data verification and automated insertion of
    FNC1 characters.
  - Support for encoding binary data including NULL (ASCII 0) characters.
  - Health Industry Barcode (HIBC) encoding capabilities.
  - Output in the following file formats: PNG, GIF, EPS, WMF, BMP, TIF, SVG.
  - Verification stage for SBN, ISBN and ISBN-13 data.


pkgId: 23a22f23fe2e4676f4b65d5e31d8c7d5bfa11cb72c72d2ab896a6219c2b7640d
name: zint-devel
arch: x86_64
version: 2.6.7
epoch: 0
release: 2
summary: Library and header files for zint
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: x86_64/zint-devel-2.6.7-2.x86_64.rpm
checksum_type: sha256
description:
  C library and header files needed to develop applications that use
  the Zint library. The API documentation can be found on the project website:
  http://www.zint.org.uk/zintSite/Manual.aspx


pkgId: 971cbdeeb9e36302c00f29b1cc1cc86163b693aa4ef2b662ad0bfafeb89c9cac
name: zypper
arch: x86_64
version: 1.14.38
epoch: 0
release: 0
summary: Command line software manager using libzypp
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Package Management
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: x86_64/zypper-1.14.38-0.x86_64.rpm
checksum_type: sha256
description:
  Zypper is a command line tool for managing software. It can be used to add
  package repositories, search for packages, install, remove, or update packages,
  install patches, hardware drivers, verify dependencies, and more.

  Zypper can be used interactively or non-interactively by user, from scripts,
  or front-ends.

  Authors:
  --------
      Jan Kupec <jkupec@suse.cz>
      Duncan Mac-Vicar <dmacvicar@suse.de>
      Martin Vidner <mvidner@suse.cz>
      Josef Reidinger <jreidinger@suse.cz>


pkgId: a2188f11e0e1b50fcee9275cd3cc307515bdebf0d97a20e7db92b0bb0c09687b
name: zypper-tizen-config
arch: noarch
version: 1.14.38
epoch: 0
release: 0
summary: zypper repo configuration for Tizen:Unified developers
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Packages
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: noarch/zypper-tizen-config-1.14.38-0.noarch.rpm
checksum_type: sha256
description:
  Zypper repo configuration for Tizen:Unified developers.
  This is for Tizen device and platform development.


# files

type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/compaction-times-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/compaction-times-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-postgresql-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-postgresql-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-sqlite-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-sqlite-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/futex-contention-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/futex-contention-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/intel-pt-events-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/intel-pt-events-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/net_dropmonitor-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/net_dropmonitor-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/sched-migration-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/sched-migration-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/config2csv.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/config_override.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configcheck.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configinit.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/console-badness.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/jitterstart.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/jitterstop.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-scf.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-remote.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-transform.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/parse-build.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/parse-console.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/srcu_lockdep.sh


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/coco_labels_list.txt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_track_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_custom/unittest_filter_custom.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_python3/unittest_filter_python3.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_reload/tensor_filter_reload_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.2


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/unittest_filter_tensorflow2_lite.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_repo_dynamicity/tensor_repo_dynamic_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/labels/google_lenet_ncsdk_caffe_1.labels


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/google_lenet_ncsdk_caffe_1.graph


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/invalid_class_custom_converter.py


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.invalid


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v2_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/multi_person_mobilenet_v1_075_float.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.param


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.xml


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.tflite


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_width_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_width_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_0_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_100_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_double_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_w32a32_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstmcell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/rnncell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_2x2_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_3x3_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_big_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_single.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_stacked.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/fc_unroll_stacked_clipped.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_disable_need_weights.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_kdim_vdim.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_self_attention.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/pooling_avg_same_padding_multi_stride.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/pooling_max_same_padding_multi_stride.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number2.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number4.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis3_split_number5.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_100.nnmodelgolden


type: file
name:
  /usr/lib64/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/epub/bin/xslt/obfuscate.xsl


type: file
name:
  /usr/lib64/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/tools/bin/docbook-xsl-update


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_none/config.xml


type: dir
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_mouse_event_not_bool/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_ood/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_width_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_touch_effect_not_bool/config.xml


