[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw15 started "build _service:gbs:hal-backend-device-tm1.spec" at Mon Jan 17 14:02:12 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-tm1 for project 'Tizen:Unified' repository 'standard' arch 'armv7hl' srcmd5 '82af733da0a56e134c10149d1a238018' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 7s] [31/41] preinstalling libmount... [ 7s] [32/41] preinstalling smack... [ 7s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7hl postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/142] installing dlog-config-persistent-logs-7.0.1-124.12 [ 9s] [2/142] installing libmagic-data-5.41-6.201 [ 9s] [3/142] installing setup-0.9-5.6 [ 9s] [4/142] installing filesystem-3.1-4.1 [ 9s] [5/142] installing glibc-2.30-13.36 [ 9s] [6/142] installing libatomic-9.2.0-15.31 [ 10s] [7/142] installing libgcc-9.2.0-15.31 [ 10s] [8/142] installing bash-3.2.57-4.5 [ 10s] [9/142] installing capi-base-common-0.4.66-51.1 [ 11s] [10/142] installing cpio-2.8-5.3 [ 11s] [11/142] installing diffutils-3.3-4.3 [ 11s] [12/142] installing findutils-4.3.8-5.255 [ 11s] [13/142] installing gdbm-1.8.3-3.551 [ 11s] [14/142] installing hostname-3.23-3.3 [ 11s] [15/142] installing libattr-2.5.1-5.241 [ 11s] [16/142] installing libblkid-2.36-10.1 [ 12s] [17/142] installing libbz2-1.0.8-5.123 [ 12s] [18/142] installing libcap-2.24-4.252 [ 12s] [19/142] installing libexpat-2.4.1-4.206 [ 12s] [20/142] installing libext2fs-1.46.0-4.34 [ 13s] [21/142] installing libffi-3.3-5.266 [ 13s] [22/142] installing libfreebl3-3.34.1-3.402 [ 13s] [23/142] installing libgfortran-9.2.0-15.31 [ 14s] [24/142] installing libgomp-9.2.0-15.31 [ 14s] [25/142] installing libitm-9.2.0-15.31 [ 14s] [26/142] installing libjson-0.15-13.4 [ 15s] [27/142] installing libltdl-2.4.2-3.435 [ 15s] [28/142] installing liblua-5.1.5-3.270 [ 15s] [29/142] installing liblzma-5.2.5-5.180 [ 16s] [30/142] installing libopenssl11-1.1.1l-6.144 [ 16s] [31/142] installing libpcre-8.44-4.45 [ 16s] [32/142] installing libpopt-1.16-3.503 [ 17s] [33/142] installing libpython3_9m1_0-3.9.1-10.34 [ 17s] [34/142] installing libsmack-1.3.1-4.243 [ 17s] [35/142] installing libsmartcols-2.36-10.1 [ 17s] [36/142] installing libsqlite-3.33.0-4.420 [ 18s] [37/142] installing libstdc++-9.2.0-15.31 [ 18s] [38/142] installing libuuid-2.36-10.1 [ 18s] [39/142] installing libzstd1-1.4.5-2.87 [ 19s] [40/142] installing m4-1.4.19-4.1 [ 19s] [41/142] installing net-tools-2.0_20121208git-4.4 [ 19s] [42/142] installing nspr-4.12-3.506 [ 19s] [43/142] installing patch-2.7-6.328 [ 19s] [44/142] installing pkg-config-0.28-3.501 [ 19s] [45/142] installing sed-4.1c-4.2 [ 19s] [46/142] installing update-alternatives-1.20.5-3.4 [ 19s] [47/142] installing which-2.17-4.4 [ 19s] [48/142] installing zlib-1.2.11-3.531 [ 20s] [49/142] installing shadow-utils-4.1.4.2-2.37 [ 20s] [50/142] installing build-compare-2015.04.28-3.181 [ 20s] [51/142] installing libstdc++-devel-9.2.0-15.31 [ 20s] [52/142] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 22s] [53/142] installing terminfo-base-full-6.2-7.188 [ 22s] [54/142] installing capi-base-common-devel-0.4.66-51.1 [ 22s] [55/142] installing cpp-9.2.0-15.31 [ 23s] [56/142] installing gcc-c++-9.2.0-15.31 [ 23s] [57/142] installing libblkid-devel-2.36-10.1 [ 23s] [58/142] installing libffi-devel-3.3-5.266 [ 23s] [59/142] installing binutils-2.33.1-9.195 [ 24s] [60/142] installing coreutils-6.9-5.89 [ 24s] [61/142] installing gawk-3.1.5-4.4 [ 24s] [62/142] installing grep-2.5.2-3.4 [ 24s] [63/142] installing libacl-2.2.53-4.456 [ 24s] [64/142] installing libcc1-9.2.0-15.31 [ 25s] [65/142] installing libconfig-1.6-5.1 [ 25s] [66/142] installing libelf-0.178-3.356 [ 25s] [67/142] installing libglib-2.70.0-33.19 [ 26s] [68/142] installing libmount-2.36-10.1 [ 26s] [69/142] installing libpcreposix-8.44-4.45 [ 26s] [70/142] installing libubsan-9.2.0-15.31 [ 27s] [71/142] installing make-4.0-2.122 [ 27s] [72/142] installing nss-certs-3.34.1-3.402 [ 27s] [73/142] installing smack-1.3.1-4.243 [ 27s] [74/142] installing bzip2-1.0.8-5.123 [ 27s] [75/142] installing libfdisk-2.36-10.1 [ 27s] [76/142] installing libkmod-29-2.1 [ 28s] [77/142] installing libmagic-5.41-6.201 [ 28s] [78/142] installing libpcrecpp-8.44-4.45 [ 28s] [79/142] installing libxml2-2.9.12-7.95 [ 29s] [80/142] installing perl-5.32.0-6.21 [ 31s] [81/142] installing xz-5.2.5-5.180 [ 32s] [82/142] installing dlog-7.0.1-124.12 [ 32s] [83/142] installing build-mkbaselibs-20120927-3.3 [ 32s] [84/142] installing linux-glibc-devel-3.10-4.367 [ 33s] [85/142] installing acl-2.2.53-4.456 [ 33s] [86/142] installing autoconf-2.69-5.36 [ 33s] [87/142] installing dlog-logger-7.0.1-124.12 [ 33s] [88/142] installing file-5.41-6.201 [ 33s] [89/142] installing glibc-locale-2.30-13.36 [ 34s] [90/142] installing libgmodule-2.70.0-33.19 [ 34s] [91/142] installing libgthread-2.70.0-33.19 [ 34s] [92/142] installing libmount-devel-2.36-10.1 [ 34s] [93/142] installing libusbgx-0.1.0-5.1 [ 35s] [94/142] installing tar-1.17-3.3 [ 35s] [95/142] installing gzip-1.3.12-3.506 [ 35s] [96/142] installing libgobject-2.70.0-33.19 [ 35s] [97/142] installing libncurses6-6.2-7.188 [ 35s] [98/142] installing pam-1.1.6-4.1 [ 36s] [99/142] installing tzdata-2021e-5.1 [ 36s] [100/142] installing libdw-0.178-3.356 [ 37s] [101/142] installing pcre-devel-8.44-4.45 [ 37s] [102/142] installing libarchive-3.5.2-3.21 [ 37s] [103/142] installing shared-mime-info-1.7-5.23 [ 43s] [104/142] installing gcc-9.2.0-15.31 [ 44s] [105/142] installing libncurses-6.2-7.188 [ 44s] [106/142] installing glibc-devel-2.30-13.36 [ 44s] [107/142] installing qemu-accel-x86_64-armv7hl-0.4-9.10 [ 52s] [108/142] installing automake-1.15.1-5.48 [ 52s] [109/142] installing less-466-3.4 [ 52s] [110/142] installing libreadline-5.2-3.154 [ 52s] [111/142] installing procps-ng-3.3.16-3.4 [ 53s] [112/142] installing libasm-0.178-3.356 [ 53s] [113/142] installing build-20120927-3.3 [ 53s] [114/142] installing libsystemd-244-88.1 [ 53s] [115/142] installing libdlog-7.0.1-124.12 [ 54s] [116/142] installing cmake-3.21.3-5.21 [ 55s] [117/142] installing libdlog-devel-7.0.1-124.12 [ 55s] [118/142] installing zlib-devel-1.2.11-3.531 [ 55s] [119/142] installing libtool-2.4.2-3.435 [ 55s] [120/142] installing elfutils-0.178-3.356 [ 55s] [121/142] installing python3-base-3.9.1-10.34 [ 56s] [122/142] installing util-linux-2.36-10.1 [ 56s] [123/142] installing systemd-244-88.1 [ 58s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 58s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 58s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 58s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 58s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 58s] [124/142] installing python3-3.9.1-10.41 [ 58s] [125/142] installing systemd-devel-244-88.1 [ 58s] [126/142] installing util-linux-su-2.36-10.1 [ 58s] [127/142] installing nss-3.34.1-3.402 [ 59s] [128/142] installing libgio-2.70.0-33.19 [ 59s] [129/142] installing gio-branding-upstream-2.70.0-33.19 [ 59s] [130/142] installing libsoftokn3-3.34.1-3.402 [ 59s] [131/142] installing glib2-tools-2.70.0-33.19 [ 59s] [132/142] installing hal-api-common-0.0.1-30.1 [ 59s] [133/142] installing libsyscommon-4.1-44.1 [ 60s] [134/142] installing rpm-4.14.1.1-9.29 [ 60s] [135/142] installing hal-api-common-devel-0.0.1-30.1 [ 60s] [136/142] installing hal-api-device-1.0.0-13.1 [ 61s] [137/142] installing hal-backend-device-common-1-7.1 [ 61s] [138/142] installing glib2-devel-2.70.0-33.19 [ 61s] [139/142] installing rpm-build-4.14.1.1-9.29 [ 61s] [140/142] installing hal-api-device-devel-1.0.0-13.1 [ 61s] [141/142] installing hal-backend-device-common-devel-1-7.1 [ 61s] [142/142] installing libsyscommon-devel-4.1-44.1 [ 61s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 61s] now finalizing build dir... [ 62s] Running build time source services... [ 62s] build target is armv7hl-tizen-linux [ 62s] ----------------------------------------------------------------- [ 62s] I have the following modifications for hal-backend-device-tm1.spec: [ 62s] 5c5 [ 62s] < Release: 0 [ 62s] --- [ 62s] > Release: 5.2 [ 62s] ----------------------------------------------------------------- [ 62s] ----- building hal-backend-device-tm1.spec (user abuild) [ 62s] ----------------------------------------------------------------- [ 62s] ----------------------------------------------------------------- [ 62s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/82af733da0a56e134c10149d1a238018-hal-backend-device-tm1' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1.spec [ 62s] Building target platforms: armv7hl-tizen-linux [ 62s] Building for target armv7hl-tizen-linux [ 62s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.p2LP4F [ 63s] + umask 022 [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + rm -rf hal-backend-device-tm1-0.0.1 [ 63s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1-0.0.1.tar.gz [ 63s] + /bin/tar -xof - [ 63s] + STATUS=0 [ 63s] + '[' 0 -ne 0 ']' [ 63s] + cd hal-backend-device-tm1-0.0.1 [ 63s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 63s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1.manifest . [ 63s] + exit 0 [ 63s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iWdxOF [ 63s] + umask 022 [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + cd hal-backend-device-tm1-0.0.1 [ 63s] ++ uname -m [ 63s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 63s] + LANG=C [ 63s] + export LANG [ 63s] + unset DISPLAY [ 63s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 63s] + export CFLAGS [ 63s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 63s] + export CXXFLAGS [ 63s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 63s] + export FFLAGS [ 63s] + LDFLAGS= [ 63s] + export LDFLAGS [ 63s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 63s] + export CFLAGS [ 63s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 63s] + export CXXFLAGS [ 63s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 63s] + export FFLAGS [ 63s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DCMAKE_INSTALL_PREFIX=/usr -DHAL_LIB_DIR=/hal/lib -DHAL_LICENSE_DIR=/hal/share/licenses -DENABLE_DLOG=on [ 63s] CMake Warning: [ 63s] No source or binary directory provided. Both will be assumed to be the [ 63s] same as the current working directory, but note that this warning will [ 63s] become a fatal error in future CMake releases. [ 63s] [ 63s] [ 63s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 63s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 63s] CMake. [ 63s] [ 63s] Update the VERSION argument value or use a ... suffix to tell [ 63s] CMake that the project does not need compatibility with older versions. [ 63s] [ 63s] [ 63s] -- The C compiler identification is GNU 9.2.0 [ 63s] -- Detecting C compiler ABI info [ 63s] -- Detecting C compiler ABI info - done [ 63s] -- Check for working C compiler: /bin/cc - skipped [ 63s] -- Detecting C compile features [ 63s] -- Detecting C compile features - done [ 63s] CMake Deprecation Warning at hw/battery/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 63s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 63s] CMake. [ 63s] [ 63s] Update the VERSION argument value or use a ... suffix to tell [ 63s] CMake that the project does not need compatibility with older versions. [ 63s] [ 63s] [ 63s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 63s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 63s] -- Found hal-backend-device-common, version 1.1 [ 63s] -- Found glib-2.0, version 2.70.0 [ 64s] CMake Deprecation Warning at hw/display/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 64s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 64s] CMake. [ 64s] [ 64s] Update the VERSION argument value or use a ... suffix to tell [ 64s] CMake that the project does not need compatibility with older versions. [ 64s] [ 64s] [ 64s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 64s] -- Found hal-backend-device-common, version 1.1 [ 64s] -- Found libsyscommon, version 4.1 [ 65s] CMake Deprecation Warning at hw/led/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 65s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 65s] CMake. [ 65s] [ 65s] Update the VERSION argument value or use a ... suffix to tell [ 65s] CMake that the project does not need compatibility with older versions. [ 65s] [ 65s] [ 65s] -- Checking for module 'hal-backend-device-common' [ 65s] -- Found hal-backend-device-common, version 1.1 [ 65s] CMake Deprecation Warning at hw/external_connection/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 65s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 65s] CMake. [ 65s] [ 65s] Update the VERSION argument value or use a ... suffix to tell [ 65s] CMake that the project does not need compatibility with older versions. [ 65s] [ 65s] [ 65s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 65s] -- Found hal-backend-device-common, version 1.1 [ 66s] -- Found glib-2.0, version 2.70.0 [ 66s] CMake Deprecation Warning at hw/touchscreen/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 66s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 66s] CMake. [ 66s] [ 66s] Update the VERSION argument value or use a ... suffix to tell [ 66s] CMake that the project does not need compatibility with older versions. [ 66s] [ 66s] [ 66s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 66s] -- Found hal-backend-device-common, version 1.1 [ 66s] -- Found libsyscommon, version 4.1 [ 67s] CMake Deprecation Warning at hw/ir/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 67s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 67s] CMake. [ 67s] [ 67s] Update the VERSION argument value or use a ... suffix to tell [ 67s] CMake that the project does not need compatibility with older versions. [ 67s] [ 67s] [ 67s] CMake Deprecation Warning at hw/thermal/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 67s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 67s] CMake. [ 67s] [ 67s] Update the VERSION argument value or use a ... suffix to tell [ 67s] CMake that the project does not need compatibility with older versions. [ 67s] [ 67s] [ 67s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 67s] -- Found hal-backend-device-common, version 1.1 [ 67s] -- Found glib-2.0, version 2.70.0 [ 68s] CMake Deprecation Warning at hw/usb_gadget/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 68s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 68s] CMake. [ 68s] [ 68s] Update the VERSION argument value or use a ... suffix to tell [ 68s] CMake that the project does not need compatibility with older versions. [ 68s] [ 68s] [ 68s] -- Checking for module 'hal-backend-device-common' [ 68s] -- Found hal-backend-device-common, version 1.1 [ 68s] CMake Deprecation Warning at hw/board/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 68s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 68s] CMake. [ 68s] [ 68s] Update the VERSION argument value or use a ... suffix to tell [ 68s] CMake that the project does not need compatibility with older versions. [ 68s] [ 68s] [ 68s] -- Checking for module 'hal-backend-device-common' [ 69s] -- Found hal-backend-device-common, version 1.1 [ 69s] CMake Deprecation Warning at hw/haptic/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 69s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 69s] CMake. [ 69s] [ 69s] Update the VERSION argument value or use a ... suffix to tell [ 69s] CMake that the project does not need compatibility with older versions. [ 69s] [ 69s] [ 69s] -- Checking for modules 'hal-backend-device-common;glib-2.0;libsyscommon' [ 69s] -- Found hal-backend-device-common, version 1.1 [ 69s] -- Found glib-2.0, version 2.70.0 [ 70s] -- Found libsyscommon, version 4.1 [ 70s] CMake Deprecation Warning at hw/memory/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 70s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 70s] CMake. [ 70s] [ 70s] Update the VERSION argument value or use a ... suffix to tell [ 70s] CMake that the project does not need compatibility with older versions. [ 70s] [ 70s] [ 70s] -- Checking for module 'dlog' [ 70s] -- Found dlog, version 1.0 [ 71s] -- Configuring done [ 71s] -- Generating done [ 71s] CMake Warning: [ 71s] Manually-specified variables were not used by the project: [ 71s] [ 71s] CMAKE_INSTALL_LIBDIR [ 71s] INCLUDE_INSTALL_DIR [ 71s] LIB_INSTALL_DIR [ 71s] SHARE_INSTALL_PREFIX [ 71s] SYSCONF_INSTALL_DIR [ 71s] [ 71s] [ 71s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1 [ 71s] + make -j4 [ 71s] [ 9%] Building C object hw/display/CMakeFiles/hal-backend-device-display.dir/display.c.o [ 71s] [ 9%] Building C object hw/battery/CMakeFiles/hal-backend-device-battery.dir/battery.c.o [ 71s] [ 13%] Building C object hw/led/CMakeFiles/hal-backend-device-led.dir/led.c.o [ 71s] [ 18%] Building C object hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/external_connection.c.o [ 71s] [ 22%] Linking C shared module libhal-backend-device-display.so [ 71s] [ 27%] Linking C shared module libhal-backend-device-led.so [ 71s] [ 31%] Linking C shared module libhal-backend-device-battery.so [ 71s] [ 36%] Linking C shared module libhal-backend-device-external-connection.so [ 71s] [ 36%] Built target hal-backend-device-display [ 71s] [ 36%] Built target hal-backend-device-led [ 71s] [ 36%] Built target hal-backend-device-battery [ 71s] [ 36%] Built target hal-backend-device-external-connection [ 71s] [ 40%] Building C object hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o [ 71s] [ 45%] Building C object hw/ir/CMakeFiles/hal-backend-device-ir.dir/ir.c.o [ 71s] [ 50%] Building C object hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o [ 71s] [ 54%] Building C object hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o [ 71s] [ 59%] Linking C shared module libhal-backend-device-touchscreen.so [ 71s] [ 63%] Linking C shared module libhal-backend-device-usb-gadget.so [ 71s] [ 68%] Linking C shared module libhal-backend-device-ir.so [ 71s] [ 72%] Linking C shared module libhal-backend-device-thermal.so [ 71s] [ 72%] Built target hal-backend-device-usb-gadget [ 71s] [ 72%] Built target hal-backend-device-touchscreen [ 71s] [ 72%] Built target hal-backend-device-ir [ 71s] [ 77%] Building C object hw/board/CMakeFiles/hal-backend-device-board.dir/board.c.o [ 71s] [ 81%] Building C object hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/standard.c.o [ 71s] [ 81%] Built target hal-backend-device-thermal [ 71s] [ 86%] Building C object hw/memory/CMakeFiles/hal-backend-device-memory.dir/memory.c.o [ 72s] [ 90%] Linking C shared module libhal-backend-device-memory.so [ 72s] [ 95%] Linking C shared module libhal-backend-device-board.so [ 72s] [ 95%] Built target hal-backend-device-memory [ 72s] [ 95%] Built target hal-backend-device-board [ 72s] [100%] Linking C shared module libhal-backend-device-haptic.so [ 72s] [100%] Built target hal-backend-device-haptic [ 72s] + exit 0 [ 72s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.iOkU5H [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd hal-backend-device-tm1-0.0.1 [ 72s] + LANG=C [ 72s] + export LANG [ 72s] + unset DISPLAY [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/usr/lib/udev/rules.d [ 72s] + install -m 644 rules/61-video.rules /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/usr/lib/udev/rules.d [ 72s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm install [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-battery [ 72s] [ 9%] Built target hal-backend-device-battery [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-display [ 72s] [ 18%] Built target hal-backend-device-display [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-led [ 72s] [ 27%] Built target hal-backend-device-led [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-external-connection [ 72s] [ 36%] Built target hal-backend-device-external-connection [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-touchscreen [ 72s] [ 45%] Built target hal-backend-device-touchscreen [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-ir [ 72s] [ 54%] Built target hal-backend-device-ir [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-thermal [ 72s] [ 63%] Built target hal-backend-device-thermal [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-usb-gadget [ 72s] [ 72%] Built target hal-backend-device-usb-gadget [ 72s] Consolidate compiler generated dependencies of target hal-backend-device-board [ 73s] [ 81%] Built target hal-backend-device-board [ 73s] Consolidate compiler generated dependencies of target hal-backend-device-haptic [ 73s] [ 90%] Built target hal-backend-device-haptic [ 73s] Consolidate compiler generated dependencies of target hal-backend-device-memory [ 73s] [100%] Built target hal-backend-device-memory [ 73s] Install the project... [ 73s] -- Install configuration: "" [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/share/licenses/hal-backend-device-tm1/LICENSE.Apache-2.0 [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-battery.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-display.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-led.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-external-connection.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-touchscreen.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-ir.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-thermal.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-usb-gadget.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-board.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-haptic.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-memory.so [ 73s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/usr/share/info/dir [ 73s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm -regex '.*\.la$' [ 73s] + xargs rm -f -- [ 73s] + xargs rm -f -- [ 73s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm -regex '.*\.a$' [ 73s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.0.1-5.2 --unique-debug-src-base hal-backend-device-tm1-0.0.1-5.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1 [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied7 bytes (7 B) copied1+0 records in [ 74s] 1+0 records out [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied, 0.000504791 s, 13.9 kB/s [ 74s] , 0.000503547 s, 13.9 kB/s [ 74s] 7 bytes (7 B) copied, 0.000505073 s, 13.9 kB/s [ 74s] , 0.000502788 s, 13.9 kB/s [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-display.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-external-connection.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-board.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-battery.so [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied1+0 records in [ 74s] 1+0 records out [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000508154 s, 13.8 kB/s [ 74s] , 0.000495121 s, 14.1 kB/s [ 74s] , 0.000495083 s, 14.1 kB/s [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied, 0.000505549 s, 13.8 kB/s [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-led.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-haptic.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-ir.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-memory.so [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000509503 s, 13.7 kB/s [ 74s] , 0.000500758 s, 14.0 kB/s [ 74s] 1+0 records in [ 74s] 1+0 records out [ 74s] 7 bytes (7 B) copied0+0 records in [ 74s] 0+0 records out [ 74s] 0 bytes (0 B) copied, 0.000508713 s, 13.8 kB/s [ 74s] , 0.000370214 s, 0.0 kB/s [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-thermal.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-touchscreen.so [ 74s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm/hal/lib/libhal-backend-device-usb-gadget.so [ 74s] 0+0 records in [ 74s] 0+0 records out [ 74s] 0 bytes (0 B) copied, 0.000397349 s, 0.0 kB/s [ 74s] 0+0 records in [ 74s] 0+0 records out [ 74s] 0 bytes (0 B) copied, 0.000369236 s, 0.0 kB/s [ 74s] 0+0 records in [ 74s] 0+0 records out [ 74s] 0 bytes (0 B) copied, 0.000369259 s, 0.0 kB/s [ 74s] 97 blocks [ 74s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1/hal-backend-device-tm1-debuginfo.manifest [ 74s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1/hal-backend-device-tm1-debugsource.manifest [ 74s] + /usr/lib/rpm/check-buildroot [ 74s] + /usr/lib/rpm//brp-compress [ 74s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 75s] + /usr/lib/rpm/brp-python-hardlink [ 75s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm [ 75s] Processing files: hal-backend-device-tm1-0.0.1-5.2.armv7hl [ 75s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 75s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 75s] [ 75s] Provides: hal-backend-device-tm1 = 0.0.1-5.2 hal-backend-device-tm1(armv7hl-32) = 0.0.1-5.2 libhal-backend-device-battery.so libhal-backend-device-board.so libhal-backend-device-display.so libhal-backend-device-external-connection.so libhal-backend-device-haptic.so libhal-backend-device-ir.so libhal-backend-device-led.so libhal-backend-device-memory.so libhal-backend-device-thermal.so libhal-backend-device-touchscreen.so libhal-backend-device-usb-gadget.so [ 75s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 75s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 75s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 75s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 75s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libhal-backend-device-common.so libsyscommon.so.4.1 libudev.so.1 libudev.so.1(LIBUDEV_183) rtld(GNU_HASH) [ 75s] Processing files: hal-backend-device-tm1-debugsource-0.0.1-5.2.armv7hl [ 75s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 75s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 75s] [ 75s] Provides: hal-backend-device-tm1-debugsource = 0.0.1-5.2 hal-backend-device-tm1-debugsource(armv7hl-32) = 0.0.1-5.2 [ 75s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 75s] Processing files: hal-backend-device-tm1-debuginfo-0.0.1-5.2.armv7hl [ 75s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 75s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 75s] [ 75s] Provides: hal-backend-device-tm1-debuginfo = 0.0.1-5.2 hal-backend-device-tm1-debuginfo(armv7hl-32) = 0.0.1-5.2 [ 75s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 75s] Recommends: hal-backend-device-tm1-debugsource(armv7hl-32) = 0.0.1-5.2 [ 75s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm [ 75s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-tm1-0.0.1-5.2.src.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-0.0.1-5.2.armv7hl.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-debugsource-0.0.1-5.2.armv7hl.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-debuginfo-0.0.1-5.2.armv7hl.rpm [ 75s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yMu5VF [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd hal-backend-device-tm1-0.0.1 [ 75s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-5.2.arm [ 75s] + exit 0 [ 75s] ... checking for files with abuild user/group [ 75s] ... creating baselibs [ 76s] ... comparing built packages with the former built [ 76s] /usr/lib/build/pkg-diff.sh [ 76s] compare /.build.oldpackages/hal-backend-device-tm1-0.0.1-5.1.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-device-tm1-0.0.1-5.2.src.rpm [ 77s] This is not a prerelease project. Compare the project name. [ 77s] comparing rpmtags [ 77s] comparing RELEASE [ 77s] comparing PROVIDES [ 77s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] RPM meta information is identical [ 77s] compare /.build.oldpackages/hal-backend-device-tm1-0.0.1-5.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-0.0.1-5.2.armv7hl.rpm [ 77s] Comparing hal-backend-device-tm1-0.0.1-5.1.armv7hl.rpm to hal-backend-device-tm1-0.0.1-5.2.armv7hl.rpm [ 77s] This is not a prerelease project. Compare the project name. [ 77s] comparing rpmtags [ 77s] comparing RELEASE [ 77s] comparing PROVIDES [ 77s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] creating rename script [ 77s] RPM file checksum differs. [ 77s] Extracting packages [ 78s] /hal/lib/libhal-backend-device-battery.so: only difference was in build-id or gnu_debuglink, GOOD. [ 78s] /hal/lib/libhal-backend-device-board.so differs in ELF section .text [ 78s] --- /tmp/tmp.CuJkP24465/tmp.PCluo24715 2022-01-17 14:03:30.458989628 +0000 [ 78s] +++ /tmp/tmp.CuJkP24465/tmp.QdRxT24719 2022-01-17 14:03:30.462989732 +0000 [ 78s] @@ -15,7 +15,7 @@ [ 78s] 076c 56effff7 bfff064b 01227b44 1a7008bd V......K."{D.p.. [ 78s] 077c 22090100 a4080100 50000000 fa080100 ".......P....... [ 78s] 078c 02090100 c4e700bf 20b108b5 fff750ef ........ .....P. [ 78s] - 079c 002008bd 00207047 10b50c21 04460120 . ... pG...!.F. [ 78s] + 079c 002008bd 00207047 10b51c21 04460120 . ... pG...!.F. [ 78s] 07ac fff728ef 48b10649 0346064a 00207944 ..(.H..I.F.J. yD [ 78s] 07bc 23607a44 c3e90012 10bd6ff0 0b0010bd #`zD......o..... [ 78s] 07cc 97010000 13000000 4c4a2de9 f0417a44 ........LJ-..AzD [ 78s] compare /.build.oldpackages/hal-backend-device-tm1-debuginfo-0.0.1-5.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-debuginfo-0.0.1-5.2.armv7hl.rpm [ 78s] skipping -debuginfo package [ 78s] compare /.build.oldpackages/hal-backend-device-tm1-debugsource-0.0.1-5.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-debugsource-0.0.1-5.2.armv7hl.rpm [ 78s] Comparing hal-backend-device-tm1-debugsource-0.0.1-5.1.armv7hl.rpm to hal-backend-device-tm1-debugsource-0.0.1-5.2.armv7hl.rpm [ 78s] This is not a prerelease project. Compare the project name. [ 78s] comparing rpmtags [ 78s] comparing RELEASE [ 79s] comparing PROVIDES [ 79s] comparing scripts [ 79s] comparing filelist [ 79s] comparing file checksum [ 79s] creating rename script [ 79s] RPM meta information is identical [ 79s] [ 79s] obsnw15 finished "build hal-backend-device-tm1.spec" at Mon Jan 17 14:03:31 UTC 2022. [ 79s] Retried build at Fri Jan 21 13:07:13 2022 returned same result, skipped Retried build at Mon Jan 24 13:35:33 2022 returned same result, skipped Retried build at Mon Jan 24 19:11:54 2022 returned same result, skipped Retried build at Tue Jan 25 12:57:31 2022 returned same result, skipped Retried build at Wed Jan 26 04:53:18 2022 returned same result, skipped Retried build at Thu Jan 27 16:51:26 2022 returned same result, skipped Retried build at Thu Jan 27 17:34:26 2022 returned same result, skipped Retried build at Thu Jan 27 19:39:47 2022 returned same result, skipped Retried build at Thu Jan 27 22:43:42 2022 returned same result, skipped Retried build at Thu Jan 27 23:32:22 2022 returned same result, skipped Retried build at Fri Jan 28 01:53:03 2022 returned same result, skipped Retried build at Fri Jan 28 03:37:26 2022 returned same result, skipped Retried build at Fri Jan 28 06:35:05 2022 returned same result, skipped Retried build at Fri Jan 28 08:18:23 2022 returned same result, skipped Retried build at Fri Jan 28 09:44:36 2022 returned same result, skipped Retried build at Fri Jan 28 11:10:57 2022 returned same result, skipped Retried build at Fri Jan 28 12:37:14 2022 returned same result, skipped Retried build at Fri Jan 28 15:32:20 2022 returned same result, skipped Retried build at Fri Feb 4 13:38:33 2022 returned same result, skipped Retried build at Tue Feb 8 11:32:09 2022 returned same result, skipped Retried build at Wed Feb 9 13:30:02 2022 returned same result, skipped Retried build at Thu Feb 10 11:27:00 2022 returned same result, skipped Retried build at Sun Feb 20 09:17:28 2022 returned same result, skipped Retried build at Mon Feb 21 08:07:37 2022 returned same result, skipped Retried build at Mon Feb 21 23:31:04 2022 returned same result, skipped Retried build at Wed Feb 23 04:52:59 2022 returned same result, skipped Retried build at Wed Feb 23 06:02:32 2022 returned same result, skipped Retried build at Wed Feb 23 07:46:00 2022 returned same result, skipped Retried build at Wed Feb 23 08:21:21 2022 returned same result, skipped Retried build at Wed Feb 23 10:45:50 2022 returned same result, skipped Retried build at Wed Feb 23 12:17:41 2022 returned same result, skipped Retried build at Wed Feb 23 14:11:32 2022 returned same result, skipped Retried build at Wed Feb 23 15:01:38 2022 returned same result, skipped Retried build at Wed Feb 23 19:07:27 2022 returned same result, skipped Retried build at Thu Mar 3 00:02:35 2022 returned same result, skipped Retried build at Thu Mar 3 00:46:39 2022 returned same result, skipped Retried build at Thu Mar 3 01:58:40 2022 returned same result, skipped Retried build at Thu Mar 3 03:23:22 2022 returned same result, skipped