[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw11 started "build _service:gbs:camera-hal-v4l2.spec" at Thu Nov 11 06:58:29 UTC 2021. [ 0s] [ 0s] Building camera-hal-v4l2 for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'fcc6c05d9f65ed303f73bea647eb1ac2' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:camera-hal-v4l2.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:camera-hal-v4l2.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:camera-hal-v4l2.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libzstd1... [ 1s] [8/41] preinstalling bash... [ 1s] [9/41] preinstalling diffutils... [ 1s] [10/41] preinstalling grep... [ 1s] [11/41] preinstalling libattr... [ 1s] [12/41] preinstalling libblkid... [ 1s] [13/41] preinstalling libbz2... [ 1s] [14/41] preinstalling libcap... [ 1s] [15/41] preinstalling libfreebl3... [ 1s] [16/41] preinstalling liblua... [ 1s] [17/41] preinstalling liblzma... [ 1s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libsqlite... [ 2s] [22/41] preinstalling libuuid... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 7s] [31/41] preinstalling libmount... [ 7s] [32/41] preinstalling smack... [ 7s] [33/41] preinstalling bzip2... [ 7s] [34/41] preinstalling libmagic... [ 7s] [35/41] preinstalling libxml2... [ 7s] [36/41] preinstalling tar... [ 7s] [37/41] preinstalling util-linux... [ 7s] [38/41] preinstalling util-linux-su... [ 7s] [39/41] preinstalling nss... [ 7s] [40/41] preinstalling libsoftokn3... [ 7s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/139] installing dlog-config-persistent-logs-6.5.8-120.1 [ 8s] [2/139] installing libmagic-data-5.39-5.21 [ 8s] [3/139] installing setup-0.9-4.44 [ 8s] warning: /etc/profile created as /etc/profile.rpmnew [ 8s] [4/139] installing filesystem-3.1-4.1 [ 9s] [5/139] installing glibc-2.30-12.13 [ 9s] [6/139] installing libatomic-9.2.0-14.10 [ 9s] [7/139] installing libgcc-9.2.0-14.10 [ 10s] [8/139] installing libzstd1-1.4.5-1.171 [ 10s] [9/139] installing bash-3.2.57-4.5 [ 10s] [10/139] installing capi-base-common-0.4.65-50.1 [ 10s] [11/139] installing cpio-2.8-5.3 [ 10s] [12/139] installing diffutils-3.3-4.3 [ 10s] [13/139] installing findutils-4.3.8-5.24 [ 10s] [14/139] installing gdbm-1.8.3-3.304 [ 11s] [15/139] installing hostname-3.23-3.3 [ 11s] [16/139] installing libattr-2.4.48-4.222 [ 11s] [17/139] installing libblkid-2.36-7.40 [ 11s] [18/139] installing libbz2-1.0.8-4.239 [ 12s] [19/139] installing libcap-2.24-4.25 [ 12s] [20/139] installing libdrm-2.4.103-1.1 [ 12s] [21/139] installing libexpat-2.2.9-3.177 [ 13s] [22/139] installing libext2fs-1.46.0-4.26 [ 13s] [23/139] installing libffi-3.3-5.31 [ 13s] [24/139] installing libfreebl3-3.34.1-3.226 [ 13s] [25/139] installing libgfortran-9.2.0-14.10 [ 14s] [26/139] installing libgomp-9.2.0-14.10 [ 14s] [27/139] installing libitm-9.2.0-14.10 [ 14s] [28/139] installing libjson-0.15-13.1 [ 15s] [29/139] installing libltdl-2.4.2-3.247 [ 15s] [30/139] installing liblua-5.1.5-3.173 [ 15s] [31/139] installing liblzma-5.2.5-5.13 [ 16s] [32/139] installing libopenssl11-1.1.1l-6.15 [ 16s] [33/139] installing libpcre-8.44-4.36 [ 16s] [34/139] installing libpopt-1.16-3.276 [ 17s] [35/139] installing libpython3_9m1_0-3.9.1-10.5 [ 17s] [36/139] installing libsmack-1.3.1-4.24 [ 17s] [37/139] installing libsmartcols-2.36-7.40 [ 18s] [38/139] installing libsqlite-3.33.0-4.200 [ 18s] [39/139] installing libstdc++-9.2.0-14.10 [ 18s] [40/139] installing libuuid-2.36-7.40 [ 19s] [41/139] installing libv4l-1.6.0-1.1 [ 19s] [42/139] installing m4-1.4.17-3.3 [ 19s] [43/139] installing net-tools-2.0_20121208git-4.4 [ 19s] [44/139] installing nspr-4.12-3.277 [ 19s] [45/139] installing patch-2.7-6.100 [ 19s] [46/139] installing pixman-0.38.4-4.9 [ 20s] [47/139] installing pkg-config-0.28-3.273 [ 20s] [48/139] installing sed-4.1c-4.2 [ 20s] [49/139] installing update-alternatives-1.20.5-3.4 [ 20s] [50/139] installing which-2.17-4.4 [ 20s] [51/139] installing zlib-1.2.11-3.288 [ 20s] [52/139] installing build-compare-2015.04.28-3.112 [ 20s] [53/139] installing libstdc++-devel-9.2.0-14.10 [ 20s] [54/139] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 22s] [55/139] installing terminfo-base-full-6.2-6.50 [ 22s] [56/139] installing capi-base-common-devel-0.4.65-50.1 [ 22s] [57/139] installing cpp-9.2.0-14.10 [ 23s] [58/139] installing gcc-c++-9.2.0-14.10 [ 23s] [59/139] installing libblkid-devel-2.36-7.40 [ 23s] [60/139] installing libffi-devel-3.3-5.31 [ 24s] [61/139] installing libv4l-devel-1.6.0-1.1 [ 24s] [62/139] installing binutils-2.33.1-9.49 [ 24s] [63/139] installing coreutils-6.9-5.38 [ 25s] [64/139] installing gawk-3.1.5-4.4 [ 25s] [65/139] installing grep-2.5.2-3.4 [ 25s] [66/139] installing libacl-2.2.53-4.220 [ 26s] [67/139] installing libcc1-9.2.0-14.10 [ 26s] [68/139] installing libelf-0.178-3.176 [ 27s] [69/139] installing libglib-2.62.3-31.18 [ 28s] [70/139] installing libmount-2.36-7.40 [ 28s] [71/139] installing libpcreposix-8.44-4.36 [ 29s] [72/139] installing libpng-1.6.37-13.5 [ 29s] [73/139] installing libubsan-9.2.0-14.10 [ 30s] [74/139] installing make-4.0-2.82 [ 30s] [75/139] installing nss-certs-3.34.1-3.226 [ 31s] [76/139] installing smack-1.3.1-4.24 [ 31s] [77/139] installing bzip2-1.0.8-4.239 [ 31s] [78/139] installing libfdisk-2.36-7.40 [ 32s] [79/139] installing libmagic-5.39-5.21 [ 32s] [80/139] installing libpcrecpp-8.44-4.36 [ 33s] [81/139] installing libxml2-2.9.12-7.13 [ 33s] [82/139] installing perl-5.32.0-4.113 [ 38s] [83/139] installing xz-5.2.5-5.13 [ 39s] [84/139] installing dlog-6.5.8-120.1 [ 39s] [85/139] installing build-mkbaselibs-20120927-3.3 [ 40s] [86/139] installing linux-glibc-devel-3.10-4.130 [ 41s] [87/139] installing autoconf-2.69-3.178 [ 42s] [88/139] installing dlog-logger-6.5.8-120.1 [ 42s] [89/139] installing file-5.39-5.21 [ 42s] [90/139] installing glibc-locale-2.30-12.13 [ 43s] [91/139] installing libgmodule-2.62.3-31.18 [ 44s] [92/139] installing libgthread-2.62.3-31.18 [ 44s] [93/139] installing libmount-devel-2.36-7.40 [ 44s] [94/139] installing tar-1.17-3.2 [ 45s] [95/139] installing gzip-1.3.12-3.277 [ 45s] [96/139] installing libgobject-2.62.3-31.18 [ 45s] [97/139] installing libncurses6-6.2-6.50 [ 47s] [98/139] installing pam-1.1.6-3.4 [ 48s] [99/139] installing tzdata-2020a-3.3 [ 49s] [100/139] installing libdw-0.178-3.176 [ 49s] [101/139] installing pcre-devel-8.44-4.36 [ 50s] [102/139] installing libarchive-3.5.1-2.64 [ 51s] [103/139] installing shared-mime-info-1.7-5.22 [ 66s] [104/139] installing gcc-9.2.0-14.10 [ 67s] [105/139] installing libncurses-6.2-6.50 [ 68s] [106/139] installing glibc-devel-2.30-12.13 [ 68s] [107/139] installing qemu-accel-x86_64-armv7l-0.4-9.7 [ 82s] [108/139] installing automake-1.15.1-3.205 [ 82s] [109/139] installing less-466-3.4 [ 83s] [110/139] installing libreadline-5.2-3.81 [ 83s] [111/139] installing procps-ng-3.3.16-3.4 [ 84s] [112/139] installing libasm-0.178-3.176 [ 84s] [113/139] installing build-20120927-3.3 [ 84s] [114/139] installing libdlog-6.5.8-120.1 [ 85s] [115/139] installing libdlog-devel-6.5.8-120.1 [ 85s] [116/139] installing zlib-devel-1.2.11-3.288 [ 86s] [117/139] installing libtool-2.4.2-3.247 [ 86s] [118/139] installing libwayland-client-1.18.92-38.3 [ 86s] [119/139] installing libwayland-server-1.18.92-38.3 [ 87s] [120/139] installing elfutils-0.178-3.176 [ 87s] [121/139] installing python3-base-3.9.1-10.5 [ 90s] [122/139] installing util-linux-2.36-7.40 [ 90s] [123/139] installing python3-3.9.1-10.7 [ 90s] [124/139] installing util-linux-su-2.36-7.40 [ 91s] [125/139] installing nss-3.34.1-3.226 [ 91s] [126/139] installing libgio-2.62.3-31.18 [ 92s] [127/139] installing gio-branding-upstream-2.62.3-31.18 [ 92s] [128/139] installing libsoftokn3-3.34.1-3.226 [ 93s] [129/139] installing glib2-tools-2.62.3-31.18 [ 93s] [130/139] installing hal-api-common-0.0.1-29.1 [ 94s] /opt/etc/hal: No such file or directory [ 94s] /opt/etc/hal: No such file or directory [ 94s] /var/tmp/rpm-tmp.FoNJQE: line 3: systemd-tmpfiles: command not found [ 94s] warning: %post(hal-api-common-0.0.1-29.1.armv7l) scriptlet failed, exit status 127 [ 94s] [131/139] installing rpm-4.14.1.1-8.47 [ 95s] [132/139] installing hal-api-common-devel-0.0.1-29.1 [ 96s] [133/139] installing hal-api-tbm-0.0.5-5.1 [ 96s] [134/139] installing hal-api-camera-0.0.16-10.1 [ 97s] [135/139] installing glib2-devel-2.62.3-31.18 [ 97s] [136/139] installing rpm-build-4.14.1.1-8.47 [ 98s] [137/139] installing hal-api-camera-devel-0.0.16-10.1 [ 98s] [138/139] installing libtbm-4.1.11-85.1 [ 99s] [139/139] installing libtbm-devel-4.1.11-85.1 [ 99s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 99s] now finalizing build dir... [ 101s] Running build time source services... [ 102s] build target is armv7l-tizen-linux [ 102s] ----------------------------------------------------------------- [ 102s] I have the following modifications for camera-hal-v4l2.spec: [ 102s] 7c7 [ 102s] < Release: 0 [ 102s] --- [ 102s] > Release: 19.1 [ 102s] ----------------------------------------------------------------- [ 102s] ----- building camera-hal-v4l2.spec (user abuild) [ 102s] ----------------------------------------------------------------- [ 102s] ----------------------------------------------------------------- [ 103s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/fcc6c05d9f65ed303f73bea647eb1ac2-camera-hal-v4l2' -ba /home/abuild/rpmbuild/SOURCES/camera-hal-v4l2.spec [ 103s] Building target platforms: armv7l-tizen-linux [ 103s] Building for target armv7l-tizen-linux [ 103s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.IeCsPA [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + rm -rf camera-hal-v4l2-0.1.9 [ 103s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/camera-hal-v4l2-0.1.9.tar.gz [ 103s] + /bin/tar -xof - [ 103s] + STATUS=0 [ 103s] + '[' 0 -ne 0 ']' [ 103s] + cd camera-hal-v4l2-0.1.9 [ 103s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 103s] + exit 0 [ 103s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Wrl8Ez [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd camera-hal-v4l2-0.1.9 [ 103s] ++ uname -m [ 103s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 103s] + LANG=C [ 103s] + export LANG [ 103s] + unset DISPLAY [ 103s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 103s] + export CFLAGS [ 103s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 103s] + export CXXFLAGS [ 103s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 103s] + export FFLAGS [ 103s] + LDFLAGS= [ 103s] + export LDFLAGS [ 103s] + ./autogen.sh [ 104s] libtoolize: putting auxiliary files in `.'. [ 104s] libtoolize: copying file `./ltmain.sh' [ 105s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 105s] libtoolize: copying file `m4/libtool.m4' [ 106s] libtoolize: copying file `m4/ltoptions.m4' [ 106s] libtoolize: copying file `m4/ltsugar.m4' [ 106s] libtoolize: copying file `m4/ltversion.m4' [ 106s] libtoolize: copying file `m4/lt~obsolete.m4' [ 106s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 125s] configure.ac:9: installing './ar-lib' [ 125s] configure.ac:9: installing './compile' [ 125s] configure.ac:24: installing './config.guess' [ 125s] configure.ac:24: installing './config.sub' [ 125s] configure.ac:4: installing './install-sh' [ 125s] configure.ac:4: installing './missing' [ 125s] src/Makefile.am: installing './depcomp' [ 125s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 125s] + export CFLAGS [ 125s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 125s] + export CXXFLAGS [ 125s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 125s] + export FFLAGS [ 125s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-libv4l2 --disable-static --libdir=/hal/lib [ 126s] checking for a BSD-compatible install... /bin/install -c [ 126s] checking whether build environment is sane... yes [ 126s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 126s] checking for gawk... gawk [ 126s] checking whether make sets $(MAKE)... yes [ 126s] checking whether make supports nested variables... yes [ 126s] checking for style of include used by make... GNU [ 126s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 126s] checking whether the C compiler works... yes [ 126s] checking for C compiler default output file name... a.out [ 126s] checking for suffix of executables... [ 126s] checking whether we are cross compiling... no [ 126s] checking for suffix of object files... o [ 126s] checking whether we are using the GNU C compiler... yes [ 126s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 126s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 126s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 126s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 126s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 126s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 126s] checking for armv7l-tizen-linux-gnueabi-link... no [ 126s] checking for ar... ar [ 126s] checking the archiver (ar) interface... ar [ 126s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 126s] checking whether we are using the GNU C compiler... (cached) yes [ 126s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 126s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 126s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 126s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 126s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 126s] checking whether we are using the GNU C++ compiler... yes [ 126s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 126s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 126s] checking for an ANSI C-conforming const... yes [ 126s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 126s] checking for grep that handles long lines and -e... /bin/grep [ 126s] checking for egrep... /bin/grep -E [ 127s] checking for ANSI C header files... yes [ 127s] checking for sys/types.h... yes [ 127s] checking for sys/stat.h... yes [ 127s] checking for stdlib.h... yes [ 127s] checking for string.h... yes [ 127s] checking for memory.h... yes [ 127s] checking for strings.h... yes [ 127s] checking for inttypes.h... yes [ 127s] checking for stdint.h... yes [ 127s] checking for unistd.h... yes [ 127s] checking for stdlib.h... (cached) yes [ 127s] checking for unistd.h... (cached) yes [ 127s] checking for sys/param.h... yes [ 127s] checking for getpagesize... yes [ 127s] checking for working mmap... yes [ 127s] checking for stdlib.h... (cached) yes [ 127s] checking for GNU libc compatible realloc... yes [ 127s] checking sys/select.h usability... yes [ 127s] checking sys/select.h presence... yes [ 127s] checking for sys/select.h... yes [ 127s] checking sys/socket.h usability... yes [ 127s] checking sys/socket.h presence... yes [ 127s] checking for sys/socket.h... yes [ 127s] checking types of arguments for select... int,fd_set *,struct timeval * [ 127s] checking whether lstat correctly handles trailing slash... yes [ 128s] checking whether stat accepts an empty string... no [ 128s] checking for vprintf... yes [ 128s] checking for _doprnt... no [ 128s] checking for stdbool.h that conforms to C99... yes [ 128s] checking for _Bool... yes [ 128s] checking for ANSI C header files... (cached) yes [ 128s] checking whether time.h and sys/time.h may both be included... yes [ 128s] checking whether armv7l-tizen-linux-gnueabi-gcc needs -traditional... no [ 128s] checking build system type... armv7l-tizen-linux-gnueabi [ 128s] checking host system type... armv7l-tizen-linux-gnueabi [ 128s] checking how to print strings... printf [ 128s] checking for a sed that does not truncate output... /bin/sed [ 128s] checking for fgrep... /bin/grep -F [ 128s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 128s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 128s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 128s] checking the name lister (/bin/nm -B) interface... BSD nm [ 128s] checking whether ln -s works... yes [ 128s] checking the maximum length of command line arguments... 1572864 [ 128s] checking whether the shell understands some XSI constructs... yes [ 128s] checking whether the shell understands "+="... yes [ 128s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 128s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 128s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 128s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 128s] checking for objdump... objdump [ 128s] checking how to recognize dependent libraries... pass_all [ 128s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 128s] checking for dlltool... no [ 128s] checking how to associate runtime and link libraries... printf %s\n [ 128s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 128s] checking for archiver @FILE support... @ [ 128s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 128s] checking for strip... strip [ 128s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 128s] checking for ranlib... ranlib [ 128s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 128s] checking for sysroot... no [ 128s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 128s] checking for mt... no [ 128s] checking if : is a manifest tool... no [ 128s] checking for dlfcn.h... yes [ 128s] checking for objdir... .libs [ 128s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 128s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 128s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 128s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 128s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 128s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 128s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 128s] checking whether -lc should be explicitly linked in... no [ 128s] checking dynamic linker characteristics... GNU/Linux ld.so [ 128s] checking how to hardcode library paths into programs... immediate [ 128s] checking whether stripping libraries is possible... yes [ 128s] checking if libtool supports shared libraries... yes [ 128s] checking whether to build shared libraries... yes [ 128s] checking whether to build static libraries... no [ 128s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 129s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 129s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 129s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 129s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 129s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 129s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 129s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 129s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 129s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 129s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 129s] checking how to hardcode library paths into programs... immediate [ 129s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 129s] checking pkg-config is at least version 0.9.0... yes [ 129s] checking for GLIB... yes [ 129s] checking for TBM... yes [ 129s] checking for DLOG... yes [ 129s] checking for HAL_API_COMMON... yes [ 129s] checking for HAL_API_CAMERA... yes [ 129s] checking for LIBV4L2... yes [ 129s] checking for ANSI C header files... (cached) yes [ 129s] checking fcntl.h usability... yes [ 129s] checking fcntl.h presence... yes [ 129s] checking for fcntl.h... yes [ 129s] checking for memory.h... (cached) yes [ 129s] checking for stdlib.h... (cached) yes [ 130s] checking for string.h... (cached) yes [ 130s] checking sys/time.h usability... yes [ 130s] checking sys/time.h presence... yes [ 130s] checking for sys/time.h... yes [ 130s] checking for unistd.h... (cached) yes [ 130s] checking for an ANSI C-conforming const... (cached) yes [ 130s] checking for pid_t... yes [ 130s] checking for size_t... yes [ 130s] checking for working alloca.h... yes [ 130s] checking for alloca... yes [ 130s] checking vfork.h usability... no [ 130s] checking vfork.h presence... no [ 130s] checking for vfork.h... no [ 130s] checking for fork... yes [ 130s] checking for vfork... yes [ 130s] checking for working fork... yes [ 130s] checking for working vfork... (cached) yes [ 130s] checking for stdlib.h... (cached) yes [ 130s] checking for GNU libc compatible malloc... yes [ 130s] checking for working memcmp... yes [ 130s] checking for sys/select.h... (cached) yes [ 130s] checking for sys/socket.h... (cached) yes [ 130s] checking types of arguments for select... (cached) int,fd_set *,struct timeval * [ 130s] checking return type of signal handlers... void [ 130s] checking for memset... yes [ 130s] checking for select... yes [ 130s] checking that generated files are newer than configure... done [ 130s] configure: creating ./config.status [ 131s] config.status: creating Makefile [ 131s] config.status: creating src/Makefile [ 131s] config.status: creating config.h [ 131s] config.status: executing depfiles commands [ 131s] config.status: executing libtool commands [ 131s] + make -j4 [ 131s] make all-recursive [ 131s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 131s] Making all in src [ 131s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/src' [ 131s] /bin/sh ../libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/hal -I/usr/include/hal -DHAVE_LIBV4L2 -fdata-sections -ffunction-sections -Wl,--gc-sections -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT libhal_backend_camera_la-hal_camera_v4l2.lo -MD -MP -MF .deps/libhal_backend_camera_la-hal_camera_v4l2.Tpo -c -o libhal_backend_camera_la-hal_camera_v4l2.lo `test -f 'hal_camera_v4l2.c' || echo './'`hal_camera_v4l2.c [ 131s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/hal -I/usr/include/hal -DHAVE_LIBV4L2 -fdata-sections -ffunction-sections -Wl,--gc-sections -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT libhal_backend_camera_la-hal_camera_v4l2.lo -MD -MP -MF .deps/libhal_backend_camera_la-hal_camera_v4l2.Tpo -c hal_camera_v4l2.c -fPIC -DPIC -o .libs/libhal_backend_camera_la-hal_camera_v4l2.o [ 132s] mv -f .deps/libhal_backend_camera_la-hal_camera_v4l2.Tpo .deps/libhal_backend_camera_la-hal_camera_v4l2.Plo [ 132s] /bin/sh ../libtool --tag=CC --mode=link armv7l-tizen-linux-gnueabi-gcc -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/hal -I/usr/include/hal -DHAVE_LIBV4L2 -fdata-sections -ffunction-sections -Wl,--gc-sections -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wl,--gc-sections -avoid-version -o libhal-backend-camera.la -rpath /hal/lib libhal_backend_camera_la-hal_camera_v4l2.lo -lglib-2.0 -ldlog -ltbm -lcapi-base-common -lv4l2 [ 132s] libtool: link: armv7l-tizen-linux-gnueabi-gcc -shared -fPIC -DPIC .libs/libhal_backend_camera_la-hal_camera_v4l2.o -lglib-2.0 -ldlog -ltbm -lcapi-base-common -lv4l2 -Wl,--gc-sections -O2 -g2 -Wl,-z -Wl,relro -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wl,-O1 -Wl,--hash-style=gnu -g -Wl,--gc-sections -Wl,-soname -Wl,libhal-backend-camera.so -o .libs/libhal-backend-camera.so [ 132s] libtool: link: ( cd ".libs" && rm -f "libhal-backend-camera.la" && ln -s "../libhal-backend-camera.la" "libhal-backend-camera.la" ) [ 132s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/src' [ 132s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 132s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 132s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 132s] + exit 0 [ 132s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lcW3Cy [ 132s] + umask 022 [ 132s] + cd /home/abuild/rpmbuild/BUILD [ 132s] + cd camera-hal-v4l2-0.1.9 [ 132s] + LANG=C [ 132s] + export LANG [ 132s] + unset DISPLAY [ 132s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm [ 132s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm [ 132s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm install [ 132s] Making install in src [ 132s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/src' [ 132s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/src' [ 132s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/lib' [ 132s] /bin/sh ../libtool --mode=install /bin/install -c libhal-backend-camera.la '/home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/lib' [ 132s] libtool: install: /bin/install -c .libs/libhal-backend-camera.so /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/lib/libhal-backend-camera.so [ 132s] libtool: install: /bin/install -c .libs/libhal-backend-camera.lai /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/lib/libhal-backend-camera.la [ 133s] libtool: install: warning: remember to run `libtool --finish /hal/lib' [ 133s] make[2]: Nothing to be done for 'install-data-am'. [ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/src' [ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/src' [ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 133s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 133s] make[2]: Nothing to be done for 'install-exec-am'. [ 133s] make[2]: Nothing to be done for 'install-data-am'. [ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9' [ 133s] + rm -f /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/usr/share/info/dir [ 133s] + find /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm -regex '.*\.la$' [ 133s] + xargs rm -f -- [ 133s] + find /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm -regex '.*\.a$' [ 133s] + xargs rm -f -- [ 133s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/share/licenses/camera-hal-v4l2 [ 133s] + cp LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/share/licenses/camera-hal-v4l2 [ 133s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.1.9-19.1 --unique-debug-src-base camera-hal-v4l2-0.1.9-19.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9 [ 133s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm/hal/lib/libhal-backend-camera.so [ 133s] 141 blocks [ 133s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/camera-hal-v4l2-debuginfo.manifest [ 133s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/camera-hal-v4l2-0.1.9/camera-hal-v4l2-debugsource.manifest [ 133s] + /usr/lib/rpm/check-buildroot [ 133s] + /usr/lib/rpm//brp-compress [ 133s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 133s] + /usr/lib/rpm/brp-python-hardlink [ 133s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm [ 133s] Processing files: camera-hal-v4l2-0.1.9-19.1.armv7l [ 133s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 133s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 133s] [ 133s] Provides: camera-hal-v4l2 = 0.1.9-19.1 camera-hal-v4l2(armv7l-32) = 0.1.9-19.1 libhal-backend-camera.so [ 133s] Requires(interp): /bin/sh /sbin/ldconfig [ 133s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 133s] Requires(post): /bin/sh /sbin/ldconfig [ 133s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 133s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.27) libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libtbm.so.1 libv4l2.so.0 rtld(GNU_HASH) [ 133s] Processing files: camera-hal-v4l2-debugsource-0.1.9-19.1.armv7l [ 133s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 133s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 133s] [ 133s] Provides: camera-hal-v4l2-debugsource = 0.1.9-19.1 camera-hal-v4l2-debugsource(armv7l-32) = 0.1.9-19.1 [ 133s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 133s] Processing files: camera-hal-v4l2-debuginfo-0.1.9-19.1.armv7l [ 133s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 133s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 133s] [ 133s] Provides: camera-hal-v4l2-debuginfo = 0.1.9-19.1 camera-hal-v4l2-debuginfo(armv7l-32) = 0.1.9-19.1 [ 133s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 133s] Recommends: camera-hal-v4l2-debugsource(armv7l-32) = 0.1.9-19.1 [ 133s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm [ 133s] Wrote: /home/abuild/rpmbuild/SRPMS/camera-hal-v4l2-0.1.9-19.1.src.rpm [ 133s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/camera-hal-v4l2-0.1.9-19.1.armv7l.rpm [ 133s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/camera-hal-v4l2-debugsource-0.1.9-19.1.armv7l.rpm [ 133s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/camera-hal-v4l2-debuginfo-0.1.9-19.1.armv7l.rpm [ 133s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.0LJ45x [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd camera-hal-v4l2-0.1.9 [ 133s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/camera-hal-v4l2-0.1.9-19.1.arm [ 133s] + exit 0 [ 133s] ... checking for files with abuild user/group [ 133s] ... creating baselibs [ 134s] ... comparing built packages with the former built [ 134s] /usr/lib/build/pkg-diff.sh [ 134s] compare /.build.oldpackages/camera-hal-v4l2-0.1.8-18.2.src.rpm /home/abuild/rpmbuild/SRPMS/camera-hal-v4l2-0.1.9-19.1.src.rpm [ 134s] This is not a prerelease project. Compare the project name. [ 134s] comparing rpmtags [ 134s] comparing RELEASE [ 134s] comparing PROVIDES [ 134s] comparing scripts [ 134s] comparing filelist [ 134s] comparing file checksum [ 134s] RPM meta information is identical [ 134s] compare /.build.oldpackages/camera-hal-v4l2-0.1.8-18.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/camera-hal-v4l2-0.1.9-19.1.armv7l.rpm [ 134s] Comparing camera-hal-v4l2-0.1.8-18.2.armv7l.rpm to camera-hal-v4l2-0.1.9-19.1.armv7l.rpm [ 134s] This is not a prerelease project. Compare the project name. [ 134s] comparing rpmtags [ 134s] --- /tmp/tmp.DTPl123603/tmp.Sfub123650 2021-11-11 07:00:43.823998965 +0000 [ 134s] +++ /tmp/tmp.DTPl123603/tmp.PteA123658 2021-11-11 07:00:43.831998953 +0000 [ 134s] @@ -1,4 +1,4 @@ [ 134s] -camera-hal-v4l2 0.1.8 (none) [ 134s] +camera-hal-v4l2 0.1.9 (none) [ 134s] Tizen Camera Hal for V4L2 [ 134s] Tizen Camera Hal for V4L2. [ 134s] tizen [ 134s] @@ -8,4 +8,4 @@ [ 134s] cpio xz 5T [ 134s] [ 134s] (none) (none) (none) [ 134s] -obs://build.tizen.org/Tizen:Unified/standard/f4b35ec4968f45e0030d21ff8f66729a-camera-hal-v4l2 Tizen:Unified [ 134s] +obs://build.tizen.org/Tizen:Unified/standard/fcc6c05d9f65ed303f73bea647eb1ac2-camera-hal-v4l2 Tizen:Unified [ 134s] RPM meta information is different [ 134s] compare /.build.oldpackages/camera-hal-v4l2-debuginfo-0.1.8-18.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/camera-hal-v4l2-debuginfo-0.1.9-19.1.armv7l.rpm [ 134s] skipping -debuginfo package [ 134s] compare /.build.oldpackages/camera-hal-v4l2-debugsource-0.1.8-18.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/camera-hal-v4l2-debugsource-0.1.9-19.1.armv7l.rpm [ 134s] Comparing camera-hal-v4l2-debugsource-0.1.8-18.2.armv7l.rpm to camera-hal-v4l2-debugsource-0.1.9-19.1.armv7l.rpm [ 135s] This is not a prerelease project. Compare the project name. [ 135s] comparing rpmtags [ 135s] --- /tmp/tmp.Wjed123741/tmp.qInk123832 2021-11-11 07:00:44.019998653 +0000 [ 135s] +++ /tmp/tmp.Wjed123741/tmp.trMX123842 2021-11-11 07:00:44.027998640 +0000 [ 135s] @@ -1,4 +1,4 @@ [ 135s] -camera-hal-v4l2-debugsource 0.1.8 (none) [ 135s] +camera-hal-v4l2-debugsource 0.1.9 (none) [ 135s] Debug sources for package camera-hal-v4l2 [ 135s] This package provides debug sources for package camera-hal-v4l2. [ 135s] Debug sources are useful when developing applications that use this [ 135s] @@ -10,4 +10,4 @@ [ 135s] cpio xz 5T [ 135s] [ 135s] (none) (none) (none) [ 135s] -obs://build.tizen.org/Tizen:Unified/standard/f4b35ec4968f45e0030d21ff8f66729a-camera-hal-v4l2 Tizen:Unified [ 135s] +obs://build.tizen.org/Tizen:Unified/standard/fcc6c05d9f65ed303f73bea647eb1ac2-camera-hal-v4l2 Tizen:Unified [ 135s] RPM meta information is different [ 135s] [ 135s] obsnw11 finished "build camera-hal-v4l2.spec" at Thu Nov 11 07:00:44 UTC 2021. [ 135s] Retried build at Fri Nov 12 13:59:20 2021 returned same result, skipped Retried build at Mon Nov 15 02:35:22 2021 returned same result, skipped Retried build at Mon Nov 15 06:02:04 2021 returned same result, skipped Retried build at Mon Nov 15 16:09:55 2021 returned same result, skipped Retried build at Mon Nov 15 18:19:35 2021 returned same result, skipped Retried build at Tue Nov 16 13:35:02 2021 returned same result, skipped Retried build at Thu Nov 25 15:27:06 2021 returned same result, skipped Retried build at Mon Nov 29 01:53:53 2021 returned same result, skipped Retried build at Mon Nov 29 05:15:22 2021 returned same result, skipped Retried build at Fri Dec 3 09:22:31 2021 returned same result, skipped Retried build at Fri Dec 3 11:52:07 2021 returned same result, skipped Retried build at Fri Dec 3 13:33:05 2021 returned same result, skipped Retried build at Fri Dec 3 15:12:05 2021 returned same result, skipped Retried build at Fri Dec 3 21:03:55 2021 returned same result, skipped Retried build at Sat Dec 4 02:18:43 2021 returned same result, skipped Retried build at Sat Dec 4 03:32:45 2021 returned same result, skipped Retried build at Sat Dec 4 07:51:54 2021 returned same result, skipped Retried build at Sat Dec 4 12:17:21 2021 returned same result, skipped Retried build at Sat Dec 4 16:58:00 2021 returned same result, skipped Retried build at Mon Dec 6 12:46:20 2021 returned same result, skipped Retried build at Tue Dec 7 08:21:15 2021 returned same result, skipped Retried build at Tue Dec 7 09:51:04 2021 returned same result, skipped Retried build at Tue Dec 7 12:02:08 2021 returned same result, skipped Retried build at Wed Dec 8 10:38:15 2021 returned same result, skipped Retried build at Wed Dec 8 11:18:03 2021 returned same result, skipped Retried build at Wed Dec 8 12:29:12 2021 returned same result, skipped Retried build at Thu Dec 9 14:10:12 2021 returned same result, skipped Retried build at Mon Dec 13 14:00:38 2021 returned same result, skipped Retried build at Wed Dec 15 12:41:47 2021 returned same result, skipped Retried build at Wed Dec 15 15:59:27 2021 returned same result, skipped Retried build at Wed Dec 15 20:21:32 2021 returned same result, skipped Retried build at Thu Dec 16 00:11:46 2021 returned same result, skipped Retried build at Fri Dec 17 18:22:54 2021 returned same result, skipped Retried build at Fri Dec 17 20:13:43 2021 returned same result, skipped Retried build at Fri Dec 17 21:44:19 2021 returned same result, skipped Retried build at Fri Dec 17 23:30:46 2021 returned same result, skipped Retried build at Sat Dec 18 01:45:30 2021 returned same result, skipped Retried build at Sat Dec 18 02:52:47 2021 returned same result, skipped Retried build at Sat Dec 18 05:14:33 2021 returned same result, skipped Retried build at Tue Dec 21 05:35:34 2021 returned same result, skipped Retried build at Wed Dec 22 23:23:39 2021 returned same result, skipped Retried build at Thu Dec 30 01:26:53 2021 returned same result, skipped Retried build at Thu Dec 30 13:09:35 2021 returned same result, skipped Retried build at Thu Dec 30 15:11:35 2021 returned same result, skipped Retried build at Thu Dec 30 15:57:43 2021 returned same result, skipped Retried build at Fri Dec 31 10:50:07 2021 returned same result, skipped Retried build at Fri Dec 31 12:25:44 2021 returned same result, skipped Retried build at Fri Dec 31 16:51:00 2021 returned same result, skipped Retried build at Fri Dec 31 18:24:45 2021 returned same result, skipped Retried build at Fri Dec 31 23:00:32 2021 returned same result, skipped Retried build at Wed Jan 12 07:26:28 2022 returned same result, skipped Retried build at Wed Jan 12 15:58:22 2022 returned same result, skipped Retried build at Wed Jan 12 21:00:47 2022 returned same result, skipped Retried build at Wed Jan 12 23:43:31 2022 returned same result, skipped Retried build at Thu Jan 13 01:47:50 2022 returned same result, skipped Retried build at Thu Jan 13 03:38:48 2022 returned same result, skipped Retried build at Thu Jan 13 08:37:50 2022 returned same result, skipped Retried build at Fri Jan 21 00:21:43 2022 returned same result, skipped Retried build at Fri Jan 21 13:00:46 2022 returned same result, skipped Retried build at Mon Jan 24 13:29:35 2022 returned same result, skipped Retried build at Mon Jan 24 18:40:28 2022 returned same result, skipped Retried build at Tue Jan 25 12:56:58 2022 returned same result, skipped Retried build at Wed Jan 26 04:51:19 2022 returned same result, skipped Retried build at Thu Jan 27 13:35:14 2022 returned same result, skipped Retried build at Thu Jan 27 16:45:03 2022 returned same result, skipped Retried build at Thu Jan 27 19:33:56 2022 returned same result, skipped Retried build at Thu Jan 27 23:26:51 2022 returned same result, skipped Retried build at Fri Jan 28 04:18:53 2022 returned same result, skipped Retried build at Fri Jan 28 07:22:52 2022 returned same result, skipped Retried build at Fri Jan 28 08:53:50 2022 returned same result, skipped Retried build at Fri Jan 28 10:33:14 2022 returned same result, skipped Retried build at Fri Jan 28 11:06:10 2022 returned same result, skipped Retried build at Fri Jan 28 13:24:56 2022 returned same result, skipped Retried build at Fri Jan 28 14:05:33 2022 returned same result, skipped Retried build at Fri Jan 28 15:33:43 2022 returned same result, skipped Retried build at Wed Feb 9 13:30:49 2022 returned same result, skipped Retried build at Thu Feb 10 11:23:35 2022 returned same result, skipped Retried build at Fri Feb 18 15:31:37 2022 returned same result, skipped Retried build at Sun Feb 20 09:15:17 2022 returned same result, skipped Retried build at Mon Feb 21 08:08:09 2022 returned same result, skipped Retried build at Mon Feb 21 23:24:23 2022 returned same result, skipped Retried build at Wed Feb 23 04:47:29 2022 returned same result, skipped Retried build at Wed Feb 23 06:00:50 2022 returned same result, skipped Retried build at Wed Feb 23 09:08:29 2022 returned same result, skipped Retried build at Wed Feb 23 12:29:33 2022 returned same result, skipped Retried build at Wed Feb 23 14:14:27 2022 returned same result, skipped Retried build at Wed Feb 23 15:46:28 2022 returned same result, skipped Retried build at Wed Feb 23 18:19:28 2022 returned same result, skipped Retried build at Wed Mar 2 23:48:12 2022 returned same result, skipped Retried build at Thu Mar 3 00:47:24 2022 returned same result, skipped Retried build at Thu Mar 3 02:41:06 2022 returned same result, skipped