[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw18 started "build _service:gbs:hal-backend-device-rpi.spec" at Sat Feb 12 06:48:28 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-rpi for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '6ddecbeda52ff4a35653a1af3bf00c91' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-rpi.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-rpi.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-rpi.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/148] installing dlog-config-persistent-logs-7.0.1-125.19 [ 9s] [2/148] installing libmagic-data-5.41-6.240 [ 9s] [3/148] installing setup-0.9-6.1 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [4/148] installing filesystem-3.1-4.1 [ 9s] [5/148] installing glibc-2.30-13.44 [ 9s] [6/148] installing libatomic-9.2.0-15.42 [ 10s] [7/148] installing libgcc-9.2.0-15.42 [ 10s] [8/148] installing bash-3.2.57-5.1 [ 10s] [9/148] installing capi-base-common-0.4.68-53.1 [ 11s] [10/148] installing cpio-2.8-5.3 [ 11s] [11/148] installing diffutils-3.3-4.3 [ 11s] [12/148] installing findutils-4.3.8-5.302 [ 11s] [13/148] installing gdbm-1.8.3-3.599 [ 11s] [14/148] installing hostname-3.23-3.3 [ 11s] [15/148] installing iniparser-4.1-1.1 [ 11s] [16/148] installing libattr-2.5.1-5.289 [ 12s] [17/148] installing libblkid-2.36-10.3 [ 12s] [18/148] installing libbz2-1.0.8-5.172 [ 12s] [19/148] installing libcap-2.24-4.286 [ 13s] [20/148] installing libexpat-2.4.1-4.253 [ 13s] [21/148] installing libext2fs-1.46.0-4.36 [ 13s] [22/148] installing libffi-3.3-5.312 [ 14s] [23/148] installing libfreebl3-3.34.1-3.436 [ 14s] [24/148] installing libgfortran-9.2.0-15.42 [ 14s] [25/148] installing libgomp-9.2.0-15.42 [ 15s] [26/148] installing libitm-9.2.0-15.42 [ 15s] [27/148] installing libjson-0.15-13.4 [ 15s] [28/148] installing libltdl-2.4.2-3.460 [ 16s] [29/148] installing liblua-5.1.5-3.296 [ 16s] [30/148] installing liblzma-5.2.5-5.224 [ 17s] [31/148] installing libopenssl11-1.1.1l-6.169 [ 17s] [32/148] installing libpcre-8.44-4.47 [ 17s] [33/148] installing libpopt-1.16-3.549 [ 18s] [34/148] installing libpython3_9m1_0-3.9.1-10.46 [ 18s] [35/148] installing libsmack-1.3.1-4.289 [ 19s] [36/148] installing libsmartcols-2.36-10.3 [ 19s] [37/148] installing libsqlite-3.33.0-4.465 [ 19s] [38/148] installing libstdc++-9.2.0-15.42 [ 20s] [39/148] installing libuuid-2.36-10.3 [ 20s] [40/148] installing libzstd1-1.4.5-2.135 [ 20s] [41/148] installing m4-1.4.19-4.1 [ 21s] [42/148] installing net-tools-2.0_20121208git-4.4 [ 21s] [43/148] installing nspr-4.12-3.553 [ 21s] [44/148] installing patch-2.7.6-7.43 [ 21s] [45/148] installing pkg-config-0.28-3.548 [ 21s] [46/148] installing sed-4.1c-4.2 [ 21s] [47/148] installing update-alternatives-1.20.5-3.4 [ 21s] [48/148] installing which-2.17-4.4 [ 21s] [49/148] installing zlib-1.2.11-3.578 [ 22s] [50/148] installing shadow-utils-4.1.4.2-3.17 [ 22s] [51/148] installing build-compare-2015.04.28-3.199 [ 22s] [52/148] installing libstdc++-devel-9.2.0-15.42 [ 22s] [53/148] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 24s] [54/148] installing terminfo-base-full-6.2-7.224 [ 24s] [55/148] installing capi-base-common-devel-0.4.68-53.1 [ 24s] [56/148] installing cpp-9.2.0-15.42 [ 25s] [57/148] installing gcc-c++-9.2.0-15.42 [ 25s] [58/148] installing libblkid-devel-2.36-10.3 [ 26s] [59/148] installing libffi-devel-3.3-5.312 [ 26s] [60/148] installing binutils-2.33.1-9.211 [ 26s] [61/148] installing coreutils-6.9-5.102 [ 26s] [62/148] installing gawk-3.1.5-4.4 [ 26s] [63/148] installing grep-2.5.2-3.4 [ 26s] [64/148] installing libacl-2.2.53-4.504 [ 27s] [65/148] installing libcap-tools-2.24-4.286 [ 27s] [66/148] installing libcc1-9.2.0-15.42 [ 27s] [67/148] installing libconfig-1.6-5.1 [ 27s] [68/148] installing libelf-0.178-4.27 [ 28s] [69/148] installing libglib-2.70.0-33.49 [ 28s] [70/148] installing libmount-2.36-10.3 [ 28s] [71/148] installing libpcreposix-8.44-4.47 [ 29s] [72/148] installing libubsan-9.2.0-15.42 [ 29s] [73/148] installing make-4.0-2.129 [ 29s] [74/148] installing nss-certs-3.34.1-3.436 [ 29s] [75/148] installing smack-1.3.1-4.289 [ 29s] [76/148] installing bzip2-1.0.8-5.172 [ 30s] [77/148] installing libfdisk-2.36-10.3 [ 30s] [78/148] installing libkmod-29-2.1 [ 30s] [79/148] installing libmagic-5.41-6.240 [ 31s] [80/148] installing libpcrecpp-8.44-4.47 [ 31s] [81/148] installing libxml2-2.9.12-7.117 [ 31s] [82/148] installing perl-5.32.0-6.46 [ 33s] [83/148] installing xz-5.2.5-5.224 [ 33s] [84/148] installing dlog-7.0.1-125.19 [ 34s] [85/148] installing build-mkbaselibs-20120927-3.3 [ 34s] [86/148] installing linux-glibc-devel-3.10-4.403 [ 34s] [87/148] installing acl-2.2.53-4.504 [ 34s] [88/148] installing autoconf-2.69-5.61 [ 35s] [89/148] installing dlog-logger-7.0.1-125.19 [ 35s] [90/148] installing file-5.41-6.240 [ 35s] [91/148] installing glibc-locale-2.30-13.44 [ 35s] [92/148] installing libgmodule-2.70.0-33.49 [ 36s] [93/148] installing libgthread-2.70.0-33.49 [ 36s] [94/148] installing libmount-devel-2.36-10.3 [ 36s] [95/148] installing libusbgx-0.1.0-5.1 [ 36s] [96/148] installing tar-1.17-3.3 [ 37s] [97/148] installing gzip-1.3.12-3.553 [ 37s] [98/148] installing libgobject-2.70.0-33.49 [ 37s] [99/148] installing libncurses6-6.2-7.224 [ 37s] [100/148] installing pam-1.1.6-4.1 [ 38s] [101/148] installing tzdata-2021e-5.1 [ 38s] [102/148] installing libdw-0.178-4.27 [ 38s] [103/148] installing pcre-devel-8.44-4.47 [ 38s] [104/148] installing security-config-1.0-158.1 [ 45s] groupadd: group 'dbus' already exists [ 45s] groupadd: group 'priv_appdebugging' already exists [ 45s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 45s] [105/148] installing libarchive-3.5.2-3.51 [ 46s] [106/148] installing shared-mime-info-1.7-5.23 [ 51s] [107/148] installing gcc-9.2.0-15.42 [ 52s] [108/148] installing libncurses-6.2-7.224 [ 52s] [109/148] installing glibc-devel-2.30-13.44 [ 52s] [110/148] installing qemu-accel-x86_64-armv7l-0.4-9.21 [ 59s] [111/148] installing automake-1.15.1-5.68 [ 60s] [112/148] installing less-466-3.4 [ 60s] [113/148] installing libreadline-5.2-3.177 [ 60s] [114/148] installing procps-ng-3.3.16-3.4 [ 61s] [115/148] installing libasm-0.178-4.27 [ 61s] [116/148] installing build-20120927-3.3 [ 61s] [117/148] installing libsystemd-244-90.1 [ 61s] [118/148] installing libdlog-7.0.1-125.19 [ 62s] [119/148] installing cmake-3.21.3-5.47 [ 63s] [120/148] installing libdlog-devel-7.0.1-125.19 [ 63s] [121/148] installing zlib-devel-1.2.11-3.578 [ 63s] [122/148] installing libtool-2.4.2-3.460 [ 63s] [123/148] installing elfutils-0.178-4.27 [ 63s] [124/148] installing capi-system-info-0.5.2-31.1 [ 63s] Running capi-system-info %posttrans script [ 63s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 63s] iniparser: cannot open /etc/info.ini [ 63s] [125/148] installing python3-base-3.9.1-10.46 [ 64s] [126/148] installing util-linux-2.36-10.3 [ 65s] [127/148] installing systemd-244-90.1 [ 67s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 67s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 67s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 67s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 67s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 67s] [128/148] installing python3-3.9.1-10.44 [ 67s] [129/148] installing systemd-devel-244-90.1 [ 67s] [130/148] installing util-linux-su-2.36-10.3 [ 67s] [131/148] installing capi-system-peripheral-io-0.3.1-32.1 [ 67s] [132/148] installing capi-system-peripheral-io-devel-0.3.1-32.1 [ 67s] [133/148] installing nss-3.34.1-3.436 [ 68s] [134/148] installing libgio-2.70.0-33.49 [ 68s] [135/148] installing gio-branding-upstream-2.70.0-33.49 [ 68s] [136/148] installing libsoftokn3-3.34.1-3.436 [ 68s] [137/148] installing glib2-tools-2.70.0-33.49 [ 68s] [138/148] installing hal-api-common-0.0.1-31.1 [ 68s] [139/148] installing libsyscommon-4.1-44.1 [ 69s] [140/148] installing rpm-4.14.1.1-9.60 [ 69s] [141/148] installing hal-api-common-devel-0.0.1-31.1 [ 69s] [142/148] installing hal-api-device-1.0.0-13.1 [ 70s] [143/148] installing hal-backend-device-common-1-7.1 [ 70s] [144/148] installing glib2-devel-2.70.0-33.49 [ 70s] [145/148] installing rpm-build-4.14.1.1-9.60 [ 70s] [146/148] installing hal-api-device-devel-1.0.0-13.1 [ 70s] [147/148] installing hal-backend-device-common-devel-1-7.1 [ 70s] [148/148] installing libsyscommon-devel-4.1-44.1 [ 70s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 70s] now finalizing build dir... [ 71s] Running build time source services... [ 71s] build target is armv7l-tizen-linux [ 71s] ----------------------------------------------------------------- [ 71s] I have the following modifications for hal-backend-device-rpi.spec: [ 71s] 5c5 [ 71s] < Release: 0 [ 71s] --- [ 71s] > Release: 10.1 [ 71s] ----------------------------------------------------------------- [ 71s] ----- building hal-backend-device-rpi.spec (user abuild) [ 71s] ----------------------------------------------------------------- [ 71s] ----------------------------------------------------------------- [ 71s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/6ddecbeda52ff4a35653a1af3bf00c91-hal-backend-device-rpi' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-rpi.spec [ 71s] Building target platforms: armv7l-tizen-linux [ 71s] Building for target armv7l-tizen-linux [ 71s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3EKkDq [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + rm -rf hal-backend-device-rpi-0.0.1 [ 71s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-rpi-0.0.1.tar.gz [ 71s] + /bin/tar -xof - [ 71s] + STATUS=0 [ 71s] + '[' 0 -ne 0 ']' [ 71s] + cd hal-backend-device-rpi-0.0.1 [ 71s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 71s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-rpi.manifest . [ 71s] + exit 0 [ 71s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.nxWqPn [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd hal-backend-device-rpi-0.0.1 [ 71s] ++ uname -m [ 71s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 71s] + LANG=C [ 71s] + export LANG [ 71s] + unset DISPLAY [ 71s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 71s] + export CFLAGS [ 71s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 71s] + export CXXFLAGS [ 71s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 71s] + export FFLAGS [ 71s] + LDFLAGS= [ 71s] + export LDFLAGS [ 71s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 71s] + export CFLAGS [ 71s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 71s] + export CXXFLAGS [ 71s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 71s] + export FFLAGS [ 71s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DENABLE_DLOG=on -DHAL_LICENSE_DIR=/hal/share/licenses -DHAL_LIB_DIR=/hal/lib [ 71s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 71s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 71s] CMake. [ 71s] [ 71s] Update the VERSION argument value or use a ... suffix to tell [ 71s] CMake that the project does not need compatibility with older versions. [ 71s] [ 71s] [ 71s] -- The C compiler identification is GNU 9.2.0 [ 71s] -- Detecting C compiler ABI info [ 71s] -- Detecting C compiler ABI info - done [ 71s] -- Check for working C compiler: /bin/cc - skipped [ 71s] -- Detecting C compile features [ 71s] -- Detecting C compile features - done [ 71s] CMake Deprecation Warning at hw/board/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 71s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 71s] CMake. [ 71s] [ 71s] Update the VERSION argument value or use a ... suffix to tell [ 71s] CMake that the project does not need compatibility with older versions. [ 71s] [ 71s] [ 71s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 71s] -- Checking for module 'hal-backend-device-common' [ 72s] -- Found hal-backend-device-common, version 1.1 [ 72s] CMake Deprecation Warning at hw/display/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 72s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 72s] CMake. [ 72s] [ 72s] Update the VERSION argument value or use a ... suffix to tell [ 72s] CMake that the project does not need compatibility with older versions. [ 72s] [ 72s] [ 72s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 72s] -- Found hal-backend-device-common, version 1.1 [ 72s] -- Found libsyscommon, version 4.1 [ 73s] CMake Deprecation Warning at hw/led/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 73s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 73s] CMake. [ 73s] [ 73s] Update the VERSION argument value or use a ... suffix to tell [ 73s] CMake that the project does not need compatibility with older versions. [ 73s] [ 73s] [ 73s] -- Checking for modules 'hal-backend-device-common;glib-2.0;capi-system-peripheral-io' [ 73s] -- Found hal-backend-device-common, version 1.1 [ 73s] -- Found glib-2.0, version 2.70.0 [ 74s] -- Found capi-system-peripheral-io, version 0.0.1 [ 74s] CMake Deprecation Warning at hw/touchscreen/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 74s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 74s] CMake. [ 74s] [ 74s] Update the VERSION argument value or use a ... suffix to tell [ 74s] CMake that the project does not need compatibility with older versions. [ 74s] [ 74s] [ 74s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 74s] -- Found hal-backend-device-common, version 1.1 [ 74s] -- Found libsyscommon, version 4.1 [ 75s] CMake Deprecation Warning at hw/thermal/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 75s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 75s] CMake. [ 75s] [ 75s] Update the VERSION argument value or use a ... suffix to tell [ 75s] CMake that the project does not need compatibility with older versions. [ 75s] [ 75s] [ 75s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 75s] -- Found hal-backend-device-common, version 1.1 [ 75s] -- Found glib-2.0, version 2.70.0 [ 76s] CMake Deprecation Warning at hw/usb_gadget/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 76s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 76s] CMake. [ 76s] [ 76s] Update the VERSION argument value or use a ... suffix to tell [ 76s] CMake that the project does not need compatibility with older versions. [ 76s] [ 76s] [ 76s] -- Checking for module 'hal-backend-device-common' [ 76s] -- Found hal-backend-device-common, version 1.1 [ 77s] CMake Deprecation Warning at hw/haptic/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 77s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 77s] CMake. [ 77s] [ 77s] Update the VERSION argument value or use a ... suffix to tell [ 77s] CMake that the project does not need compatibility with older versions. [ 77s] [ 77s] [ 77s] -- Checking for modules 'hal-backend-device-common;glib-2.0;libsyscommon;capi-system-peripheral-io' [ 77s] -- Found hal-backend-device-common, version 1.1 [ 77s] -- Found glib-2.0, version 2.70.0 [ 77s] -- Found libsyscommon, version 4.1 [ 77s] -- Found capi-system-peripheral-io, version 0.0.1 [ 78s] CMake Deprecation Warning at hw/memory/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 78s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 78s] CMake. [ 78s] [ 78s] Update the VERSION argument value or use a ... suffix to tell [ 78s] CMake that the project does not need compatibility with older versions. [ 78s] [ 78s] [ 78s] -- Checking for module 'dlog' [ 78s] -- Found dlog, version 1.0 [ 79s] -- Configuring done [ 79s] -- Generating done [ 79s] CMake Warning: [ 79s] Manually-specified variables were not used by the project: [ 79s] [ 79s] CMAKE_INSTALL_LIBDIR [ 79s] INCLUDE_INSTALL_DIR [ 79s] LIB_INSTALL_DIR [ 79s] SHARE_INSTALL_PREFIX [ 79s] SYSCONF_INSTALL_DIR [ 79s] [ 79s] [ 79s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 [ 79s] + make -j4 [ 79s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 79s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1//CMakeFiles/progress.marks [ 79s] make -f CMakeFiles/Makefile2 all [ 79s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/board/CMakeFiles/hal-backend-device-board.dir/build.make hw/board/CMakeFiles/hal-backend-device-board.dir/depend [ 79s] make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/depend [ 79s] make -f hw/led/CMakeFiles/hal-backend-device-led.dir/build.make hw/led/CMakeFiles/hal-backend-device-led.dir/depend [ 79s] make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/DependInfo.cmake --color= [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board/CMakeFiles/hal-backend-device-board.dir/DependInfo.cmake --color= [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display/CMakeFiles/hal-backend-device-display.dir/DependInfo.cmake --color= [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led/CMakeFiles/hal-backend-device-led.dir/DependInfo.cmake --color= [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/board/CMakeFiles/hal-backend-device-board.dir/build.make hw/board/CMakeFiles/hal-backend-device-board.dir/build [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/led/CMakeFiles/hal-backend-device-led.dir/build.make hw/led/CMakeFiles/hal-backend-device-led.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 6%] Building C object hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_touchscreen_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -fPIC -MD -MT hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o -MF CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o.d -o CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen/touchscreen.c [ 79s] [ 12%] Building C object hw/board/CMakeFiles/hal-backend-device-board.dir/board.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_board_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT hw/board/CMakeFiles/hal-backend-device-board.dir/board.c.o -MF CMakeFiles/hal-backend-device-board.dir/board.c.o.d -o CMakeFiles/hal-backend-device-board.dir/board.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board/board.c [ 79s] [ 18%] Building C object hw/display/CMakeFiles/hal-backend-device-display.dir/display.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_display_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -fPIC -MD -MT hw/display/CMakeFiles/hal-backend-device-display.dir/display.c.o -MF CMakeFiles/hal-backend-device-display.dir/display.c.o.d -o CMakeFiles/hal-backend-device-display.dir/display.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display/display.c [ 79s] [ 25%] Building C object hw/led/CMakeFiles/hal-backend-device-led.dir/led.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_led_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/ -fvisibility=hidden -fPIC -MD -MT hw/led/CMakeFiles/hal-backend-device-led.dir/led.c.o -MF CMakeFiles/hal-backend-device-led.dir/led.c.o.d -o CMakeFiles/hal-backend-device-led.dir/led.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led/led.c [ 79s] [ 31%] Linking C shared module libhal-backend-device-touchscreen.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-touchscreen.dir/link.txt --verbose=1 [ 79s] [ 37%] Linking C shared module libhal-backend-device-board.so [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-touchscreen.so CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-board.dir/link.txt --verbose=1 [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-board.so CMakeFiles/hal-backend-device-board.dir/board.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev [ 79s] [ 43%] Linking C shared module libhal-backend-device-display.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-display.dir/link.txt --verbose=1 [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-display.so CMakeFiles/hal-backend-device-display.dir/display.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 43%] Built target hal-backend-device-board [ 79s] make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/DependInfo.cmake --color= [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build [ 79s] [ 43%] Built target hal-backend-device-touchscreen [ 79s] make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/DependInfo.cmake --color= [ 79s] [ 50%] Building C object hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_thermal_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -fPIC -MD -MT hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o -MF CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o.d -o CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal/thermal.c [ 79s] make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 56%] Building C object hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_usb_gadget_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o -MF CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o.d -o CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget/usb_gadget.c [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 56%] Built target hal-backend-device-display [ 79s] make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/DependInfo.cmake --color= [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 62%] Building C object hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/gpio.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_haptic_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/ -fvisibility=hidden -fPIC -MD -MT hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/gpio.c.o -MF CMakeFiles/hal-backend-device-haptic.dir/gpio.c.o.d -o CMakeFiles/hal-backend-device-haptic.dir/gpio.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic/gpio.c [ 79s] [ 68%] Linking C shared module libhal-backend-device-led.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-led.dir/link.txt --verbose=1 [ 79s] [ 75%] Linking C shared module libhal-backend-device-usb-gadget.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-usb-gadget.dir/link.txt --verbose=1 [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/ -fvisibility=hidden -shared -o libhal-backend-device-led.so CMakeFiles/hal-backend-device-led.dir/led.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev -lglib-2.0 -lcapi-system-peripheral-io -lcapi-base-common [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-usb-gadget.so CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 75%] Built target hal-backend-device-usb-gadget [ 79s] make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/depend [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory/CMakeFiles/hal-backend-device-memory.dir/DependInfo.cmake --color= [ 79s] [ 75%] Built target hal-backend-device-led [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 81%] Building C object hw/memory/CMakeFiles/hal-backend-device-memory.dir/memory.c.o [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_memory_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT hw/memory/CMakeFiles/hal-backend-device-memory.dir/memory.c.o -MF CMakeFiles/hal-backend-device-memory.dir/memory.c.o.d -o CMakeFiles/hal-backend-device-memory.dir/memory.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory/memory.c [ 79s] [ 87%] Linking C shared module libhal-backend-device-thermal.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-thermal.dir/link.txt --verbose=1 [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-thermal.so CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev -lglib-2.0 [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 87%] Built target hal-backend-device-thermal [ 79s] [ 93%] Linking C shared module libhal-backend-device-memory.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-memory.dir/link.txt --verbose=1 [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-memory.so CMakeFiles/hal-backend-device-memory.dir/memory.c.o -ldlog [ 79s] [100%] Linking C shared module libhal-backend-device-haptic.so [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-haptic.dir/link.txt --verbose=1 [ 79s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/ -fvisibility=hidden -shared -o libhal-backend-device-haptic.so CMakeFiles/hal-backend-device-haptic.dir/gpio.c.o -L/hal/lib -Wl,-rpath,/hal/lib -lhal-backend-device-common -ldlog -ludev -lglib-2.0 -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcapi-system-peripheral-io -lcapi-base-common -ldlog -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 -lcapi-system-peripheral-io -lcapi-base-common [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [100%] Built target hal-backend-device-memory [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [100%] Built target hal-backend-device-haptic [ 79s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/CMakeFiles 0 [ 79s] + exit 0 [ 79s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.WGW6Un [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd hal-backend-device-rpi-0.0.1 [ 79s] + LANG=C [ 79s] + export LANG [ 79s] + unset DISPLAY [ 79s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm [ 79s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm [ 79s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm install [ 79s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 79s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1//CMakeFiles/progress.marks [ 79s] /bin/make -f CMakeFiles/Makefile2 all [ 79s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/board/CMakeFiles/hal-backend-device-board.dir/build.make hw/board/CMakeFiles/hal-backend-device-board.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/board/CMakeFiles/hal-backend-device-board.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-board [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/board/CMakeFiles/hal-backend-device-board.dir/build.make hw/board/CMakeFiles/hal-backend-device-board.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/board/CMakeFiles/hal-backend-device-board.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 12%] Built target hal-backend-device-board [ 79s] /bin/make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/display/CMakeFiles/hal-backend-device-display.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-display [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/display/CMakeFiles/hal-backend-device-display.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 25%] Built target hal-backend-device-display [ 79s] /bin/make -f hw/led/CMakeFiles/hal-backend-device-led.dir/build.make hw/led/CMakeFiles/hal-backend-device-led.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/led/CMakeFiles/hal-backend-device-led.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-led [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/led/CMakeFiles/hal-backend-device-led.dir/build.make hw/led/CMakeFiles/hal-backend-device-led.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/led/CMakeFiles/hal-backend-device-led.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 37%] Built target hal-backend-device-led [ 79s] /bin/make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-touchscreen [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 50%] Built target hal-backend-device-touchscreen [ 79s] /bin/make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-thermal [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 62%] Built target hal-backend-device-thermal [ 79s] /bin/make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-usb-gadget [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 75%] Built target hal-backend-device-usb-gadget [ 79s] /bin/make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-haptic [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [ 87%] Built target hal-backend-device-haptic [ 79s] /bin/make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/depend [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hw/memory/CMakeFiles/hal-backend-device-memory.dir/DependInfo.cmake --color= [ 79s] Consolidate compiler generated dependencies of target hal-backend-device-memory [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /bin/make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/build [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[2]: Nothing to be done for 'hw/memory/CMakeFiles/hal-backend-device-memory.dir/build'. [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] [100%] Built target hal-backend-device-memory [ 79s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/CMakeFiles 0 [ 79s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 79s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] make[1]: Nothing to be done for 'preinstall'. [ 79s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1' [ 79s] Install the project... [ 79s] /usr/bin/cmake -P cmake_install.cmake [ 79s] -- Install configuration: "" [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/share/licenses/hal-backend-device-rpi/LICENSE.Apache-2.0 [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-board.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-display.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-led.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-touchscreen.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-thermal.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-usb-gadget.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-haptic.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-memory.so [ 79s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/usr/share/info/dir [ 79s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm -regex '.*\.la$' [ 79s] + xargs rm -f -- [ 79s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm -regex '.*\.a$' [ 79s] + xargs rm -f -- [ 79s] + install -D -m 644 hw/reboot/register_storage /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/reboot/register_storage [ 79s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/peripheral-io [ 79s] + mkdir /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/peripheral-io/rpi3 [ 79s] + mkdir /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/peripheral-io/rpi4 [ 79s] + install -m 644 hw/peripheral-io/uart.ini /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/peripheral-io [ 79s] + install -m 644 hw/peripheral-io/rpi3/gpio.ini /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/peripheral-io/rpi3 [ 79s] + install -m 644 hw/peripheral-io/rpi4/gpio.ini /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/etc/peripheral-io/rpi4 [ 79s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.0.1-10.1 --unique-debug-src-base hal-backend-device-rpi-0.0.1-10.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1 [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied, 0.000879248 s, 8.0 kB/s [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied, 0.000915031 s, 7.7 kB/s [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied1+0 records in [ 80s] 1+0 records out [ 80s] , 0.000496189 s, 14.1 kB/s [ 80s] 7 bytes (7 B) copied, 0.000839494 s, 8.3 kB/s [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-board.so [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-display.so [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-led.so [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-haptic.so [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied, 0.000499417 s, 14.0 kB/s [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied, 0.00061602 s, 11.4 kB/s [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied, 0.000529666 s, 13.2 kB/s [ 80s] 1+0 records in [ 80s] 1+0 records out [ 80s] 7 bytes (7 B) copied, 0.000492098 s, 14.2 kB/s [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-memory.so [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-thermal.so [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-touchscreen.so [ 80s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm/hal/lib/libhal-backend-device-usb-gadget.so [ 80s] 0+0 records in [ 80s] 0+0 records out [ 80s] 0 bytes (0 B) copied, 0.00036592 s, 0.0 kB/s [ 80s] 0+0 records in [ 80s] 0+0 records out [ 80s] 0 bytes (0 B) copied, 0.000368961 s, 0.0 kB/s [ 80s] 0+0 records in [ 80s] 0+0 records out [ 80s] 0+0 records in [ 80s] 0+0 records out [ 80s] 0 bytes (0 B) copied0 bytes (0 B) copied, 0.000372977 s, 0.0 kB/s [ 80s] , 0.000363861 s, 0.0 kB/s [ 80s] 65 blocks [ 80s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hal-backend-device-rpi-debuginfo.manifest [ 80s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-rpi-0.0.1/hal-backend-device-rpi-debugsource.manifest [ 80s] + /usr/lib/rpm/check-buildroot [ 80s] + /usr/lib/rpm//brp-compress [ 80s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 80s] + /usr/lib/rpm/brp-python-hardlink [ 80s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm [ 80s] Processing files: hal-backend-device-rpi-0.0.1-10.1.armv7l [ 80s] Aptk: PG1hbmlmZXN0Pg0KCTxyZXF1ZXN0Pg0KCQk8ZG9tYWluIG5hbWU9Il8iIC8+DQoJ [ 80s] PC9yZXF1ZXN0Pg0KPC9tYW5pZmVzdD4NCg== [ 80s] [ 80s] Provides: hal-backend-device-rpi = 0.0.1-10.1 hal-backend-device-rpi(armv7l-32) = 0.0.1-10.1 libhal-backend-device-board.so libhal-backend-device-display.so libhal-backend-device-haptic.so libhal-backend-device-led.so libhal-backend-device-memory.so libhal-backend-device-thermal.so libhal-backend-device-touchscreen.so libhal-backend-device-usb-gadget.so [ 80s] Requires(interp): /bin/sh /bin/sh [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Requires(post): /bin/sh /sbin/ldconfig [ 80s] Requires(postun): /bin/sh /sbin/ldconfig [ 80s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcapi-system-peripheral-io.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libhal-backend-device-common.so libsyscommon.so.4.1 rtld(GNU_HASH) [ 80s] Processing files: hal-backend-device-rpi-debugsource-0.0.1-10.1.armv7l [ 80s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 80s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 80s] [ 80s] Provides: hal-backend-device-rpi-debugsource = 0.0.1-10.1 hal-backend-device-rpi-debugsource(armv7l-32) = 0.0.1-10.1 [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Processing files: hal-backend-device-rpi3-0.0.1-10.1.armv7l [ 80s] Provides: hal-backend-device-rpi3 = 0.0.1-10.1 hal-backend-device-rpi3(armv7l-32) = 0.0.1-10.1 [ 80s] Requires(interp): /bin/sh [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Requires(post): /bin/sh [ 80s] Conflicts: hal-backend-device-rpi4 [ 80s] Processing files: hal-backend-device-rpi4-0.0.1-10.1.armv7l [ 80s] Provides: hal-backend-device-rpi4 = 0.0.1-10.1 hal-backend-device-rpi4(armv7l-32) = 0.0.1-10.1 [ 80s] Requires(interp): /bin/sh [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Requires(post): /bin/sh [ 80s] Conflicts: hal-backend-device-rpi3 [ 80s] Processing files: hal-backend-device-rpi-debuginfo-0.0.1-10.1.armv7l [ 80s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 80s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 80s] [ 80s] Provides: hal-backend-device-rpi-debuginfo = 0.0.1-10.1 hal-backend-device-rpi-debuginfo(armv7l-32) = 0.0.1-10.1 [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Recommends: hal-backend-device-rpi-debugsource(armv7l-32) = 0.0.1-10.1 [ 80s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm [ 80s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-rpi-0.0.1-10.1.src.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi-0.0.1-10.1.armv7l.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi-debugsource-0.0.1-10.1.armv7l.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi3-0.0.1-10.1.armv7l.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi4-0.0.1-10.1.armv7l.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi-debuginfo-0.0.1-10.1.armv7l.rpm [ 80s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.WoWOym [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd hal-backend-device-rpi-0.0.1 [ 80s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-rpi-0.0.1-10.1.arm [ 80s] + exit 0 [ 80s] ... checking for files with abuild user/group [ 80s] ... creating baselibs [ 81s] ... comparing built packages with the former built [ 81s] /usr/lib/build/pkg-diff.sh [ 81s] compare /.build.oldpackages/hal-backend-device-rpi-0.0.1-9.2.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-device-rpi-0.0.1-10.1.src.rpm [ 81s] This is not a prerelease project. Compare the project name. [ 81s] comparing rpmtags [ 81s] comparing RELEASE [ 81s] comparing PROVIDES [ 81s] comparing scripts [ 81s] comparing filelist [ 81s] comparing file checksum [ 81s] RPM meta information is identical [ 81s] compare /.build.oldpackages/hal-backend-device-rpi-0.0.1-9.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi-0.0.1-10.1.armv7l.rpm [ 82s] Comparing hal-backend-device-rpi-0.0.1-9.2.armv7l.rpm to hal-backend-device-rpi-0.0.1-10.1.armv7l.rpm [ 82s] This is not a prerelease project. Compare the project name. [ 82s] comparing rpmtags [ 82s] --- /tmp/tmp.qBBQpv2175/tmp.GmVEEv2193 2022-02-12 06:49:50.153510042 +0000 [ 82s] +++ /tmp/tmp.qBBQpv2175/tmp.OiNtas2195 2022-02-12 06:49:50.157510036 +0000 [ 82s] @@ -8,4 +8,4 @@ [ 82s] cpio xz 5T [ 82s] [ 82s] (none) (none) (none) [ 82s] -obs://build.tizen.org/Tizen:Unified/standard/6a6511439a5e232197662f2e557fc872-hal-backend-device-rpi Tizen:Unified [ 82s] +obs://build.tizen.org/Tizen:Unified/standard/6ddecbeda52ff4a35653a1af3bf00c91-hal-backend-device-rpi Tizen:Unified [ 82s] RPM meta information is different [ 82s] compare /.build.oldpackages/hal-backend-device-rpi-debuginfo-0.0.1-9.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi-debuginfo-0.0.1-10.1.armv7l.rpm [ 82s] skipping -debuginfo package [ 82s] compare /.build.oldpackages/hal-backend-device-rpi-debugsource-0.0.1-9.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi-debugsource-0.0.1-10.1.armv7l.rpm [ 82s] Comparing hal-backend-device-rpi-debugsource-0.0.1-9.2.armv7l.rpm to hal-backend-device-rpi-debugsource-0.0.1-10.1.armv7l.rpm [ 82s] This is not a prerelease project. Compare the project name. [ 82s] comparing rpmtags [ 82s] --- /tmp/tmp.MMlfEy2227/tmp.xSZHIs2250 2022-02-12 06:49:50.361509774 +0000 [ 82s] +++ /tmp/tmp.MMlfEy2227/tmp.YeUHrW2252 2022-02-12 06:49:50.365509768 +0000 [ 82s] @@ -10,4 +10,4 @@ [ 82s] cpio xz 5T [ 82s] [ 82s] (none) (none) (none) [ 82s] -obs://build.tizen.org/Tizen:Unified/standard/6a6511439a5e232197662f2e557fc872-hal-backend-device-rpi Tizen:Unified [ 82s] +obs://build.tizen.org/Tizen:Unified/standard/6ddecbeda52ff4a35653a1af3bf00c91-hal-backend-device-rpi Tizen:Unified [ 82s] RPM meta information is different [ 82s] compare /.build.oldpackages/hal-backend-device-rpi3-0.0.1-9.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi3-0.0.1-10.1.armv7l.rpm [ 82s] Comparing hal-backend-device-rpi3-0.0.1-9.2.armv7l.rpm to hal-backend-device-rpi3-0.0.1-10.1.armv7l.rpm [ 82s] This is not a prerelease project. Compare the project name. [ 82s] comparing rpmtags [ 82s] --- /tmp/tmp.hxEnpF2270/tmp.wiGxcp2293 2022-02-12 06:49:50.545509536 +0000 [ 82s] +++ /tmp/tmp.hxEnpF2270/tmp.IVjSzT2295 2022-02-12 06:49:50.549509531 +0000 [ 82s] @@ -8,4 +8,4 @@ [ 82s] cpio xz 5T [ 82s] [ 82s] (none) (none) (none) [ 82s] -obs://build.tizen.org/Tizen:Unified/standard/6a6511439a5e232197662f2e557fc872-hal-backend-device-rpi Tizen:Unified [ 82s] +obs://build.tizen.org/Tizen:Unified/standard/6ddecbeda52ff4a35653a1af3bf00c91-hal-backend-device-rpi Tizen:Unified [ 82s] RPM meta information is different [ 82s] compare /.build.oldpackages/hal-backend-device-rpi4-0.0.1-9.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-device-rpi4-0.0.1-10.1.armv7l.rpm [ 82s] Comparing hal-backend-device-rpi4-0.0.1-9.2.armv7l.rpm to hal-backend-device-rpi4-0.0.1-10.1.armv7l.rpm [ 82s] This is not a prerelease project. Compare the project name. [ 82s] comparing rpmtags [ 82s] --- /tmp/tmp.QYFddv2322/tmp.cgaLHm2361 2022-02-12 06:49:50.729509299 +0000 [ 82s] +++ /tmp/tmp.QYFddv2322/tmp.TrhCWb2363 2022-02-12 06:49:50.733509294 +0000 [ 82s] @@ -8,4 +8,4 @@ [ 82s] cpio xz 5T [ 82s] [ 82s] (none) (none) (none) [ 82s] -obs://build.tizen.org/Tizen:Unified/standard/6a6511439a5e232197662f2e557fc872-hal-backend-device-rpi Tizen:Unified [ 82s] +obs://build.tizen.org/Tizen:Unified/standard/6ddecbeda52ff4a35653a1af3bf00c91-hal-backend-device-rpi Tizen:Unified [ 82s] RPM meta information is different [ 82s] [ 82s] obsnw18 finished "build hal-backend-device-rpi.spec" at Sat Feb 12 06:49:50 UTC 2022. [ 82s] Retried build at Sun Feb 20 09:15:02 2022 returned same result, skipped Retried build at Mon Feb 21 08:08:01 2022 returned same result, skipped Retried build at Mon Feb 21 23:23:28 2022 returned same result, skipped Retried build at Wed Feb 23 04:46:55 2022 returned same result, skipped Retried build at Wed Feb 23 05:59:47 2022 returned same result, skipped Retried build at Wed Feb 23 09:08:05 2022 returned same result, skipped Retried build at Wed Feb 23 12:28:51 2022 returned same result, skipped Retried build at Wed Feb 23 14:13:31 2022 returned same result, skipped Retried build at Wed Feb 23 15:45:29 2022 returned same result, skipped Retried build at Wed Feb 23 18:18:35 2022 returned same result, skipped Retried build at Wed Mar 2 13:23:47 2022 returned same result, skipped Retried build at Wed Mar 2 23:53:36 2022 returned same result, skipped Retried build at Thu Mar 3 00:43:41 2022 returned same result, skipped Retried build at Thu Mar 3 02:41:44 2022 returned same result, skipped Retried build at Thu Mar 3 02:52:02 2022 returned same result, skipped