[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw05 started "build _service:gbs:liboauth.spec" at Thu Mar 3 02:26:33 UTC 2022. [ 0s] [ 0s] Building liboauth for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'f7f607007aa0ac700d6a1d5cfc3da9cb' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:liboauth.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:liboauth.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:liboauth.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 7s] [31/41] preinstalling libmount... [ 7s] [32/41] preinstalling smack... [ 7s] [33/41] preinstalling bzip2... [ 7s] [34/41] preinstalling libmagic... [ 7s] [35/41] preinstalling libxml2... [ 7s] [36/41] preinstalling tar... [ 7s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/133] installing boost-license-1.77.0-8.1 [ 8s] [2/133] installing libmagic-data-5.41-6.291 [ 9s] [3/133] installing setup-0.9-6.3 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [4/133] installing filesystem-3.1-4.1 [ 9s] [5/133] installing glibc-2.30-13.70 [ 9s] [6/133] installing libatomic-9.2.0-15.59 [ 9s] [7/133] installing libgcc-9.2.0-15.59 [ 10s] [8/133] installing bash-3.2.57-5.1 [ 10s] [9/133] installing cpio-2.8-5.3 [ 10s] [10/133] installing diffutils-3.3-4.3 [ 10s] [11/133] installing findutils-4.3.8-5.358 [ 10s] [12/133] installing gdbm-1.8.3-3.658 [ 10s] [13/133] installing hostname-3.23-3.3 [ 10s] [14/133] installing libattr-2.5.1-5.349 [ 11s] [15/133] installing libblkid-2.37.4-11.1 [ 11s] [16/133] installing libbz2-1.0.8-5.221 [ 11s] [17/133] installing libcap-2.24-4.344 [ 12s] [18/133] installing libcares-1.18.1-8.1 [ 12s] [19/133] installing libexpat-2.4.1-4.299 [ 12s] [20/133] installing libext2fs-1.46.0-4.38 [ 12s] [21/133] installing libffi-3.3-5.369 [ 13s] [22/133] installing libfreebl3-3.34.1-3.474 [ 13s] [23/133] installing libgfortran-9.2.0-15.59 [ 13s] [24/133] installing libgomp-9.2.0-15.59 [ 14s] [25/133] installing libitm-9.2.0-15.59 [ 14s] [26/133] installing libltdl-2.4.6-4.30 [ 14s] [27/133] installing liblua-5.1.5-3.327 [ 15s] [28/133] installing liblzma-5.2.5-5.289 [ 15s] [29/133] installing libopenssl11-1.1.1l-6.205 [ 15s] [30/133] installing libpcre-8.45-5.3 [ 16s] [31/133] installing libpopt-1.16-3.607 [ 16s] [32/133] installing libpython3_91_0-3.9.10-11.5 [ 16s] [33/133] installing libsmack-1.3.1-4.335 [ 17s] [34/133] installing libsmartcols-2.37.4-11.1 [ 17s] [35/133] installing libsqlite-3.37.2-5.21 [ 17s] [36/133] installing libstdc++-9.2.0-15.59 [ 18s] [37/133] installing libuuid-2.37.4-11.1 [ 18s] [38/133] installing libzstd1-1.4.5-2.186 [ 18s] [39/133] installing m4-1.4.19-4.1 [ 18s] [40/133] installing net-tools-2.0_20121208git-4.4 [ 19s] [41/133] installing nspr-4.12-3.600 [ 19s] [42/133] installing patch-2.7.6-7.97 [ 19s] [43/133] installing pkg-config-0.29.2-4.16 [ 19s] [44/133] installing sed-4.1c-4.2 [ 19s] [45/133] installing update-alternatives-1.20.5-3.4 [ 19s] [46/133] installing which-2.17-4.4 [ 19s] [47/133] installing zlib-1.2.11-3.637 [ 19s] [48/133] installing build-compare-2015.04.28-3.221 [ 19s] [49/133] installing libstdc++-devel-9.2.0-15.59 [ 20s] [50/133] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 21s] [51/133] installing terminfo-base-full-6.2-7.267 [ 21s] [52/133] installing cpp-9.2.0-15.59 [ 22s] [53/133] installing gcc-c++-9.2.0-15.59 [ 23s] [54/133] installing libblkid-devel-2.37.4-11.1 [ 23s] [55/133] installing libffi-devel-3.3-5.369 [ 23s] [56/133] installing xz-devel-5.2.5-5.289 [ 23s] [57/133] installing binutils-2.33.1-9.239 [ 23s] [58/133] installing coreutils-6.9-5.122 [ 23s] [59/133] installing gawk-3.1.5-4.4 [ 23s] [60/133] installing grep-2.5.2-3.4 [ 23s] [61/133] installing libacl-2.2.53-4.562 [ 24s] [62/133] installing libcc1-9.2.0-15.59 [ 24s] [63/133] installing libelf-0.178-4.66 [ 24s] [64/133] installing libglib-2.70.0-33.75 [ 25s] [65/133] installing libmount-2.37.4-11.1 [ 25s] [66/133] installing libpcreposix-8.45-5.3 [ 25s] [67/133] installing libubsan-9.2.0-15.59 [ 25s] [68/133] installing make-4.3-3.7 [ 26s] [69/133] installing nspr-devel-4.12-3.600 [ 26s] [70/133] installing nss-certs-3.34.1-3.474 [ 26s] [71/133] installing smack-1.3.1-4.335 [ 26s] [72/133] installing boost-system-1.77.0-8.1 [ 26s] [73/133] installing boost-thread-1.77.0-8.1 [ 26s] [74/133] installing bzip2-1.0.8-5.221 [ 26s] [75/133] installing libfdisk-2.37.4-11.1 [ 27s] [76/133] installing libicu-70.1-24.1 [ 28s] [77/133] installing libmagic-5.41-6.291 [ 28s] [78/133] installing libpcrecpp-8.45-5.3 [ 29s] [79/133] installing libxml2-2.9.12-7.147 [ 29s] [80/133] installing perl-5.34.0-7.11 [ 31s] [81/133] installing xz-5.2.5-5.289 [ 31s] [82/133] installing build-mkbaselibs-20120927-3.3 [ 31s] [83/133] installing linux-glibc-devel-3.10-4.465 [ 32s] [84/133] installing autoconf-2.71-6.31 [ 32s] [85/133] installing file-5.41-6.291 [ 32s] [86/133] installing glibc-locale-2.30-13.70 [ 33s] [87/133] installing libgmodule-2.70.0-33.75 [ 33s] [88/133] installing libgthread-2.70.0-33.75 [ 33s] [89/133] installing libmount-devel-2.37.4-11.1 [ 33s] [90/133] installing tar-1.17-3.3 [ 33s] [91/133] installing gzip-1.3.12-3.613 [ 34s] [92/133] installing libgobject-2.70.0-33.75 [ 34s] [93/133] installing libncurses6-6.2-7.267 [ 34s] [94/133] installing pam-1.1.6-4.2 [ 35s] [95/133] installing tzdata-2021e-5.1 [ 35s] [96/133] installing libdw-0.178-4.66 [ 35s] [97/133] installing nghttp2-1.46.0-17.1 [ 36s] [98/133] installing pcre-devel-8.45-5.3 [ 36s] [99/133] installing libarchive-3.5.2-3.94 [ 36s] [100/133] installing shared-mime-info-1.7-5.23 [ 41s] [101/133] installing gcc-9.2.0-15.59 [ 42s] [102/133] installing libncurses-6.2-7.267 [ 42s] [103/133] installing glibc-devel-2.30-13.70 [ 42s] [104/133] installing qemu-accel-x86_64-armv7l-0.4-9.25 [ 49s] [105/133] installing automake-1.16.4-6.28 [ 49s] [106/133] installing less-466-3.4 [ 49s] [107/133] installing libreadline-5.2-3.206 [ 50s] [108/133] installing procps-ng-3.3.17-4.1 [ 50s] [109/133] installing libasm-0.178-4.66 [ 50s] [110/133] installing build-20120927-3.3 [ 50s] [111/133] installing ncurses-devel-6.2-7.267 [ 50s] [112/133] installing libcurl-7.81.0-31.3 [ 51s] [113/133] installing readline-devel-5.2-3.206 [ 51s] [114/133] installing libcurl-devel-7.81.0-31.3 [ 51s] [115/133] installing zlib-devel-1.2.11-3.637 [ 51s] [116/133] installing libtool-2.4.6-4.30 [ 51s] [117/133] installing libxml2-tools-2.9.12-7.147 [ 51s] [118/133] installing elfutils-0.178-4.66 [ 51s] [119/133] installing python3-base-3.9.10-11.5 [ 52s] [120/133] installing util-linux-2.37.4-11.1 [ 52s] [121/133] installing python3-3.9.10-11.4 [ 52s] [122/133] installing libopenssl1.1-devel-1.1.1l-6.205 [ 52s] [123/133] installing util-linux-su-2.37.4-11.1 [ 52s] [124/133] installing libxml2-devel-2.9.12-7.147 [ 52s] [125/133] installing nss-3.34.1-3.474 [ 53s] [126/133] installing libgio-2.70.0-33.75 [ 53s] [127/133] installing gio-branding-upstream-2.70.0-33.75 [ 53s] [128/133] installing libsoftokn3-3.34.1-3.474 [ 53s] [129/133] installing glib2-tools-2.70.0-33.75 [ 53s] [130/133] installing rpm-4.14.1.1-9.111 [ 54s] [131/133] installing nss-devel-3.34.1-3.474 [ 54s] [132/133] installing glib2-devel-2.70.0-33.75 [ 54s] [133/133] installing rpm-build-4.14.1.1-9.111 [ 54s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 54s] now finalizing build dir... [ 55s] Running build time source services... [ 55s] build target is armv7l-tizen-linux [ 55s] ----------------------------------------------------------------- [ 55s] I have the following modifications for liboauth.spec: [ 55s] 5c5 [ 55s] < Release: 1 [ 55s] --- [ 55s] > Release: 7.9 [ 55s] 57a58 [ 55s] > %changelog [ 55s] ----------------------------------------------------------------- [ 55s] ----- building liboauth.spec (user abuild) [ 55s] ----------------------------------------------------------------- [ 55s] ----------------------------------------------------------------- [ 55s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/f7f607007aa0ac700d6a1d5cfc3da9cb-liboauth' -ba /home/abuild/rpmbuild/SOURCES/liboauth.spec [ 55s] Building target platforms: armv7l-tizen-linux [ 55s] Building for target armv7l-tizen-linux [ 55s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8vX9IO [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + rm -rf liboauth-1.0.3 [ 55s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/liboauth-1.0.3.tar.gz [ 55s] + /bin/tar -xof - [ 55s] + STATUS=0 [ 55s] + '[' 0 -ne 0 ']' [ 55s] + cd liboauth-1.0.3 [ 55s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 55s] + exit 0 [ 55s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.2iAsaP [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd liboauth-1.0.3 [ 55s] ++ uname -m [ 55s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 55s] + LANG=C [ 55s] + export LANG [ 55s] + unset DISPLAY [ 55s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 55s] + export CFLAGS [ 55s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 55s] + export CXXFLAGS [ 55s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 55s] + export FFLAGS [ 55s] + LDFLAGS= [ 55s] + export LDFLAGS [ 55s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 55s] + export CFLAGS [ 55s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 55s] + export CXXFLAGS [ 55s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 55s] + export FFLAGS [ 55s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 56s] checking for sed... /bin/sed [ 56s] checking liboauth version... 1.0.3 [ 56s] checking build system type... armv7l-tizen-linux-gnueabi [ 56s] checking host system type... armv7l-tizen-linux-gnueabi [ 56s] checking target system type... armv7l-tizen-linux-gnueabi [ 56s] checking for a BSD-compatible install... /bin/install -c [ 57s] checking whether build environment is sane... yes [ 57s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 57s] checking for gawk... gawk [ 57s] checking whether make sets $(MAKE)... yes [ 57s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 57s] checking whether the C compiler works... yes [ 57s] checking for C compiler default output file name... a.out [ 57s] checking for suffix of executables... [ 57s] checking whether we are cross compiling... no [ 57s] checking for suffix of object files... o [ 57s] checking whether we are using the GNU C compiler... yes [ 57s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 57s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 57s] checking for style of include used by make... GNU [ 57s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 57s] checking whether make sets $(MAKE)... (cached) yes [ 57s] checking whether ln -s works... yes [ 57s] checking how to print strings... printf [ 57s] checking for a sed that does not truncate output... (cached) /bin/sed [ 57s] checking for grep that handles long lines and -e... /bin/grep [ 57s] checking for egrep... /bin/grep -E [ 57s] checking for fgrep... /bin/grep -F [ 57s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 57s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 57s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 57s] checking the name lister (/bin/nm -B) interface... BSD nm [ 57s] checking the maximum length of command line arguments... 1572864 [ 57s] checking whether the shell understands some XSI constructs... yes [ 57s] checking whether the shell understands "+="... yes [ 57s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 57s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 57s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 57s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 57s] checking for objdump... objdump [ 57s] checking how to recognize dependent libraries... pass_all [ 57s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 57s] checking for dlltool... no [ 57s] checking how to associate runtime and link libraries... printf %s\n [ 57s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 57s] checking for ar... ar [ 57s] checking for archiver @FILE support... @ [ 57s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 57s] checking for strip... strip [ 57s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 57s] checking for ranlib... ranlib [ 57s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 57s] checking for sysroot... no [ 57s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 57s] checking for mt... no [ 57s] checking if : is a manifest tool... no [ 57s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 57s] checking for ANSI C header files... yes [ 57s] checking for sys/types.h... yes [ 58s] checking for sys/stat.h... yes [ 58s] checking for stdlib.h... yes [ 58s] checking for string.h... yes [ 58s] checking for memory.h... yes [ 58s] checking for strings.h... yes [ 58s] checking for inttypes.h... yes [ 58s] checking for stdint.h... yes [ 58s] checking for unistd.h... yes [ 58s] checking for dlfcn.h... yes [ 58s] checking for objdir... .libs [ 58s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 58s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 58s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 58s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 58s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 58s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 58s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 58s] checking whether -lc should be explicitly linked in... no [ 58s] checking dynamic linker characteristics... GNU/Linux ld.so [ 58s] checking how to hardcode library paths into programs... immediate [ 58s] checking whether stripping libraries is possible... yes [ 58s] checking if libtool supports shared libraries... yes [ 58s] checking whether to build shared libraries... yes [ 58s] checking whether to build static libraries... no [ 58s] checking whether armv7l-tizen-linux-gnueabi-gcc and cc understand -c and -o together... yes [ 58s] checking for ANSI C header files... (cached) yes [ 58s] checking for unistd.h... (cached) yes [ 58s] checking time.h usability... yes [ 58s] checking time.h presence... yes [ 58s] checking for time.h... yes [ 58s] checking for string.h... (cached) yes [ 58s] checking alloca.h usability... yes [ 58s] checking alloca.h presence... yes [ 58s] checking for alloca.h... yes [ 58s] checking stdio.h usability... yes [ 58s] checking stdio.h presence... yes [ 58s] checking for stdio.h... yes [ 58s] checking stdarg.h usability... yes [ 58s] checking stdarg.h presence... yes [ 58s] checking for stdarg.h... yes [ 58s] checking math.h usability... yes [ 58s] checking math.h presence... yes [ 58s] checking for math.h... yes [ 59s] checking whether sys/types.h defines makedev... no [ 59s] checking sys/mkdev.h usability... no [ 59s] checking sys/mkdev.h presence... no [ 59s] checking for sys/mkdev.h... no [ 59s] checking sys/sysmacros.h usability... yes [ 59s] checking sys/sysmacros.h presence... yes [ 59s] checking for sys/sysmacros.h... yes [ 59s] checking for size_t... yes [ 59s] checking for working alloca.h... yes [ 59s] checking for alloca... yes [ 59s] checking whether struct tm is in sys/time.h or time.h... time.h [ 59s] checking for struct stat.st_blocks... yes [ 59s] checking for dirent.h that defines DIR... yes [ 59s] checking for library containing opendir... none required [ 59s] checking whether closedir returns void... no [ 59s] checking if -Wl,--as-needed works... yes [ 59s] checking for curl... no [ 59s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 59s] checking pkg-config is at least version 0.9.0... yes [ 59s] checking for CURL... yes [ 59s] checking openssl/hmac.h usability... yes [ 59s] checking openssl/hmac.h presence... yes [ 59s] checking for openssl/hmac.h... yes [ 59s] configure: [ 59s] [ 59s] NOTE: OpenSSL is not compatible with GPL applications. [ 59s] Even if only linked with GPL code you are not allowed to distibute your app. [ 59s] However liboauth provides an exeption (to the GPL) to circumvent this issue [ 59s] (see README, src/hash.c). Nevertheless, double-check your licensing. [ 59s] [ 59s] liboauth itself is licensed under MIT license and comatible with the GPL. [ 59s] [ 59s] Either way, you are probably better off using NSS (configure --enable-nss); [ 59s] future versions of liboauth will default to the Mozilla NSS. [ 59s] [ 59s] see http://people.gnome.org/~markmc/openssl-and-the-gpl.html [ 59s] [ 59s] checking for doxygen... no [ 59s] checking for dot... no [ 59s] checking for perl... /bin/perl [ 59s] configure: creating ./config.status [ 60s] config.status: creating Makefile [ 60s] config.status: creating src/Makefile [ 60s] config.status: creating doc/Makefile [ 60s] config.status: creating tests/Makefile [ 60s] config.status: creating liboauth.lsm [ 60s] config.status: creating oauth.pc [ 60s] config.status: creating Doxyfile [ 60s] config.status: creating doc/mainpage.dox [ 60s] config.status: creating src/config.h [ 60s] config.status: executing tests/atconfig commands [ 60s] config.status: executing depfiles commands [ 61s] config.status: executing libtool commands [ 61s] configure: [ 61s] [ 61s] liboauth configured: [ 61s] ----------------------- [ 61s] [ 61s] version: 1.0.3 [ 61s] interface revision: 8:7:8 [ 61s] hash/signature: OpenSSL [ 61s] http integration: libcurl [ 61s] libcurl-timeout: - [ 61s] generate documentation: no [ 61s] installation prefix: /usr [ 61s] CFLAGS: -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g [ 61s] LDFLAGS: -Wall -export-symbols-regex '^oauth_.*' -Wl,--as-needed [ 61s] [ 61s] type "make" followed my "make install" as root. [ 61s] [ 61s] [ 61s] + make -j4 [ 61s] Making all in src [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] make all-am [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] /bin/sh ../libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-oauth.lo -MD -MP -MF .deps/liboauth_la-oauth.Tpo -c -o liboauth_la-oauth.lo `test -f 'oauth.c' || echo './'`oauth.c [ 61s] /bin/sh ../libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-hash.lo -MD -MP -MF .deps/liboauth_la-hash.Tpo -c -o liboauth_la-hash.lo `test -f 'hash.c' || echo './'`hash.c [ 61s] /bin/sh ../libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-xmalloc.lo -MD -MP -MF .deps/liboauth_la-xmalloc.Tpo -c -o liboauth_la-xmalloc.lo `test -f 'xmalloc.c' || echo './'`xmalloc.c [ 61s] /bin/sh ../libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-oauth_http.lo -MD -MP -MF .deps/liboauth_la-oauth_http.Tpo -c -o liboauth_la-oauth_http.lo `test -f 'oauth_http.c' || echo './'`oauth_http.c [ 61s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-xmalloc.lo -MD -MP -MF .deps/liboauth_la-xmalloc.Tpo -c xmalloc.c -fPIC -DPIC -o .libs/liboauth_la-xmalloc.o [ 61s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-oauth.lo -MD -MP -MF .deps/liboauth_la-oauth.Tpo -c oauth.c -fPIC -DPIC -o .libs/liboauth_la-oauth.o [ 61s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-hash.lo -MD -MP -MF .deps/liboauth_la-hash.Tpo -c hash.c -fPIC -DPIC -o .libs/liboauth_la-hash.o [ 61s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT liboauth_la-oauth_http.lo -MD -MP -MF .deps/liboauth_la-oauth_http.Tpo -c oauth_http.c -fPIC -DPIC -o .libs/liboauth_la-oauth_http.o [ 61s] mv -f .deps/liboauth_la-xmalloc.Tpo .deps/liboauth_la-xmalloc.Plo [ 61s] hash.c: In function 'oauth_sign_rsa_sha1': [ 61s] hash.c:416:7: warning: 'md_ctx' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 61s] 416 | if (EVP_SignFinal(md_ctx, sig, &len, pkey)) { [ 61s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] hash.c: In function 'oauth_verify_rsa_sha1': [ 61s] hash.c:472:9: warning: 'md_ctx' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 61s] 472 | err = EVP_VerifyFinal(md_ctx, b64d, slen, pkey); [ 61s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] mv -f .deps/liboauth_la-hash.Tpo .deps/liboauth_la-hash.Plo [ 61s] mv -f .deps/liboauth_la-oauth.Tpo .deps/liboauth_la-oauth.Plo [ 61s] mv -f .deps/liboauth_la-oauth_http.Tpo .deps/liboauth_la-oauth_http.Plo [ 61s] /bin/sh ../libtool --tag=CC --mode=link armv7l-tizen-linux-gnueabi-gcc -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -export-symbols-regex '^oauth_.*' -Wl,--as-needed -version-info 8:7:8 -o liboauth.la -rpath /usr/lib liboauth_la-oauth.lo liboauth_la-hash.lo liboauth_la-xmalloc.lo liboauth_la-oauth_http.lo -lcrypto -lcurl [ 61s] libtool: link: /bin/nm -B .libs/liboauth_la-oauth.o .libs/liboauth_la-hash.o .libs/liboauth_la-xmalloc.o .libs/liboauth_la-oauth_http.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /bin/sed 's/.* //' | sort | uniq > .libs/liboauth.exp [ 61s] libtool: link: /bin/grep -E -e "^oauth_.*" ".libs/liboauth.exp" > ".libs/liboauth.expT" [ 61s] libtool: link: mv -f ".libs/liboauth.expT" ".libs/liboauth.exp" [ 61s] libtool: link: echo "{ global:" > .libs/liboauth.ver [ 61s] libtool: link: cat .libs/liboauth.exp | sed -e "s/\(.*\)/\1;/" >> .libs/liboauth.ver [ 61s] libtool: link: echo "local: *; };" >> .libs/liboauth.ver [ 61s] libtool: link: armv7l-tizen-linux-gnueabi-gcc -shared -fPIC -DPIC .libs/liboauth_la-oauth.o .libs/liboauth_la-hash.o .libs/liboauth_la-xmalloc.o .libs/liboauth_la-oauth_http.o -lcrypto -lcurl -O2 -Wl,-z -Wl,relro -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-soname -Wl,liboauth.so.0 -Wl,-version-script -Wl,.libs/liboauth.ver -o .libs/liboauth.so.0.8.7 [ 61s] libtool: link: (cd ".libs" && rm -f "liboauth.so.0" && ln -s "liboauth.so.0.8.7" "liboauth.so.0") [ 61s] libtool: link: (cd ".libs" && rm -f "liboauth.so" && ln -s "liboauth.so.0.8.7" "liboauth.so") [ 61s] libtool: link: ( cd ".libs" && rm -f "liboauth.la" && ln -s "../liboauth.la" "liboauth.la" ) [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] Making all in doc [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc' [ 61s] make[1]: Nothing to be done for 'all'. [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc' [ 61s] Making all in tests [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests' [ 61s] make[1]: Nothing to be done for 'all'. [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests' [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3' [ 61s] make[1]: Nothing to be done for 'all-am'. [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3' [ 61s] + exit 0 [ 61s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.qqpKpR [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd liboauth-1.0.3 [ 61s] + LANG=C [ 61s] + export LANG [ 61s] + unset DISPLAY [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm [ 61s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm [ 61s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm install [ 61s] Making install in src [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib" [ 61s] /bin/sh ../libtool --mode=install /bin/install -c liboauth.la '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib' [ 61s] libtool: install: /bin/install -c .libs/liboauth.so.0.8.7 /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib/liboauth.so.0.8.7 [ 61s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib && { ln -s -f liboauth.so.0.8.7 liboauth.so.0 || { rm -f liboauth.so.0 && ln -s liboauth.so.0.8.7 liboauth.so.0; }; }) [ 61s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib && { ln -s -f liboauth.so.0.8.7 liboauth.so || { rm -f liboauth.so && ln -s liboauth.so.0.8.7 liboauth.so; }; }) [ 61s] libtool: install: /bin/install -c .libs/liboauth.lai /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib/liboauth.la [ 61s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 61s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/include" [ 61s] /bin/install -c -m 644 oauth.h '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/include' [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src' [ 61s] Making install in doc [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc' [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc' [ 61s] make[2]: Nothing to be done for 'install-exec-am'. [ 61s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/share/man/man3" [ 61s] /bin/install -c -m 644 oauth.3 '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/share/man/man3' [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc' [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc' [ 61s] Making install in tests [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests' [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests' [ 61s] make[2]: Nothing to be done for 'install-exec-am'. [ 61s] make[2]: Nothing to be done for 'install-data-am'. [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests' [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests' [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3' [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3' [ 61s] make[2]: Nothing to be done for 'install-exec-am'. [ 61s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib/pkgconfig" [ 61s] /bin/install -c -m 644 oauth.pc '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib/pkgconfig' [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3' [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3' [ 61s] + rm -f /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/share/info/dir [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm -regex '.*\.la$' [ 61s] + xargs rm -f -- [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm -regex '.*\.a$' [ 61s] + xargs rm -f -- [ 61s] + sed -i s/Requires.private/#Requires.private/g /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib/pkgconfig/oauth.pc [ 61s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 1.0.3-7.9 --unique-debug-src-base liboauth-1.0.3-7.9.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/liboauth-1.0.3 [ 62s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/lib/liboauth.so.0.8.7 [ 62s] 192 blocks [ 62s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/liboauth-1.0.3/liboauth-debuginfo.manifest [ 62s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/liboauth-1.0.3/liboauth-debugsource.manifest [ 62s] + /usr/lib/rpm/check-buildroot [ 62s] + /usr/lib/rpm//brp-compress [ 62s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 62s] + /usr/lib/rpm/brp-python-hardlink [ 62s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm [ 62s] Processing files: liboauth-1.0.3-7.9.armv7l [ 62s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.v5eysR [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd liboauth-1.0.3 [ 62s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/share/licenses/liboauth [ 62s] + export LC_ALL=C [ 62s] + LC_ALL=C [ 62s] + export LICENSEDIR [ 62s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/share/licenses/liboauth [ 62s] + cp -pr COPYING.MIT /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm/usr/share/licenses/liboauth [ 62s] + exit 0 [ 62s] Provides: liboauth = 1.0.3-7.9 liboauth(armv7l-32) = 1.0.3-7.9 liboauth.so.0 [ 62s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Requires(post): /sbin/ldconfig [ 62s] Requires(postun): /sbin/ldconfig [ 62s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.1 libcrypto.so.1.1(OPENSSL_1_1_0) libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 62s] Processing files: liboauth-debugsource-1.0.3-7.9.armv7l [ 62s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 62s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 62s] [ 62s] Provides: liboauth-debugsource = 1.0.3-7.9 liboauth-debugsource(armv7l-32) = 1.0.3-7.9 [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Processing files: liboauth-devel-1.0.3-7.9.armv7l [ 62s] Provides: liboauth-devel = 1.0.3-7.9 liboauth-devel(armv7l-32) = 1.0.3-7.9 pkgconfig(oauth) = 1.0.3 [ 62s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Requires(post): /sbin/ldconfig [ 62s] Requires(postun): /sbin/ldconfig [ 62s] Requires: /usr/bin/pkg-config liboauth.so.0 [ 62s] Processing files: liboauth-debuginfo-1.0.3-7.9.armv7l [ 62s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 62s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 62s] [ 62s] Provides: liboauth-debuginfo = 1.0.3-7.9 liboauth-debuginfo(armv7l-32) = 1.0.3-7.9 [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Recommends: liboauth-debugsource(armv7l-32) = 1.0.3-7.9 [ 62s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm [ 62s] Wrote: /home/abuild/rpmbuild/SRPMS/liboauth-1.0.3-7.9.src.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/liboauth-1.0.3-7.9.armv7l.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/liboauth-debugsource-1.0.3-7.9.armv7l.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/liboauth-devel-1.0.3-7.9.armv7l.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/liboauth-debuginfo-1.0.3-7.9.armv7l.rpm [ 62s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.bcduuO [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd liboauth-1.0.3 [ 62s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-7.9.arm [ 62s] + exit 0 [ 62s] ... checking for files with abuild user/group [ 62s] ... creating baselibs [ 63s] ... comparing built packages with the former built [ 63s] /usr/lib/build/pkg-diff.sh [ 63s] compare /.build.oldpackages/liboauth-1.0.3-7.8.src.rpm /home/abuild/rpmbuild/SRPMS/liboauth-1.0.3-7.9.src.rpm [ 63s] This is not a prerelease project. Compare the project name. [ 63s] comparing rpmtags [ 63s] comparing RELEASE [ 63s] comparing PROVIDES [ 63s] comparing scripts [ 63s] comparing filelist [ 63s] comparing file checksum [ 63s] RPM meta information is identical [ 63s] compare /.build.oldpackages/liboauth-1.0.3-7.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/liboauth-1.0.3-7.9.armv7l.rpm [ 63s] Comparing liboauth-1.0.3-7.8.armv7l.rpm to liboauth-1.0.3-7.9.armv7l.rpm [ 63s] This is not a prerelease project. Compare the project name. [ 63s] comparing rpmtags [ 63s] comparing RELEASE [ 63s] comparing PROVIDES [ 63s] comparing scripts [ 63s] comparing filelist [ 63s] comparing file checksum [ 63s] creating rename script [ 64s] RPM file checksum differs. [ 64s] Extracting packages [ 64s] /usr/lib/liboauth.so.0.8.7: only difference was in build-id or gnu_debuglink, GOOD. [ 64s] Package content is identical [ 64s] compare /.build.oldpackages/liboauth-debuginfo-1.0.3-7.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/liboauth-debuginfo-1.0.3-7.9.armv7l.rpm [ 64s] skipping -debuginfo package [ 64s] compare /.build.oldpackages/liboauth-debugsource-1.0.3-7.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/liboauth-debugsource-1.0.3-7.9.armv7l.rpm [ 64s] Comparing liboauth-debugsource-1.0.3-7.8.armv7l.rpm to liboauth-debugsource-1.0.3-7.9.armv7l.rpm [ 64s] This is not a prerelease project. Compare the project name. [ 64s] comparing rpmtags [ 64s] comparing RELEASE [ 64s] comparing PROVIDES [ 64s] comparing scripts [ 64s] comparing filelist [ 64s] comparing file checksum [ 64s] creating rename script [ 64s] RPM meta information is identical [ 64s] compare /.build.oldpackages/liboauth-devel-1.0.3-7.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/liboauth-devel-1.0.3-7.9.armv7l.rpm [ 64s] Comparing liboauth-devel-1.0.3-7.8.armv7l.rpm to liboauth-devel-1.0.3-7.9.armv7l.rpm [ 64s] This is not a prerelease project. Compare the project name. [ 64s] comparing rpmtags [ 64s] comparing RELEASE [ 64s] comparing PROVIDES [ 64s] comparing scripts [ 64s] comparing filelist [ 64s] comparing file checksum [ 64s] creating rename script [ 64s] RPM file checksum differs. [ 65s] Extracting packages [ 65s] /usr/lib/pkgconfig/oauth.pc differs (ASCII text) [ 65s] --- old//usr/lib/pkgconfig/oauth.pc 2022-03-03 00:32:50.000000000 +0000 [ 65s] +++ new//usr/lib/pkgconfig/oauth.pc 2022-03-03 02:27:34.000000000 +0000 [ 65s] @@ -8,5 +8,5 @@ [ 65s] #Requires.private: libcurl libcrypto [ 65s] Version: 1.0.3 [ 65s] Libs: -L${libdir} -loauth [ 65s] -Libs.private: -lm -lcurl -lcrypto [ 65s] +Libs.private: -lm -lcurl -lcrypto [ 65s] Cflags: -I${includedir} [ 65s] [ 65s] obsnw05 finished "build liboauth.spec" at Thu Mar 3 02:27:38 UTC 2022. [ 65s]