[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 1s] [ 1s] obsnw20 started "build _service:git-buildpackage:python-fasteners_0.12.0-2ubuntu1.dsc" at Wed May 10 06:02:02 UTC 2017. [ 1s] [ 1s] Building fasteners for project 'Tools:Devel' repository 'Ubuntu_14.04' arch 'i586' srcmd5 '9ca0ae09bf05a192d985d0d43c6abfab' [ 1s] [ 1s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:git-buildpackage:python-fasteners_0.12.0-2ubuntu1.dsc ... [ 1s] running changelog2spec --target debian --file /var/cache/build/root_4/.build-srcdir/_service:git-buildpackage:python-fasteners_0.12.0-2ubuntu1.dsc [ 1s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:git-buildpackage:python-fasteners_0.12.0-2ubuntu1.dsc build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 2s] cycle: libc6 -> libgcc1 [ 2s] breaking dependency libgcc1 -> libc6 [ 2s] cycle: initscripts -> upstart [ 2s] breaking dependency upstart -> initscripts [ 2s] [1/46] preinstalling libgcc1... [ 2s] [2/46] preinstalling libc6... [ 2s] [3/46] preinstalling base-passwd... [ 2s] [4/46] preinstalling debianutils... [ 2s] [5/46] preinstalling findutils... [ 2s] [6/46] preinstalling libattr1... [ 2s] [7/46] preinstalling libbz2-1.0... [ 2s] [8/46] preinstalling libc-bin... [ 2s] [9/46] preinstalling libdbus-1-3... [ 2s] [10/46] preinstalling liblzma5... [ 2s] [11/46] preinstalling libnih1... [ 2s] [12/46] preinstalling libpcre3... [ 2s] [13/46] preinstalling libsepol1... [ 2s] [14/46] preinstalling libsigsegv2... [ 2s] [15/46] preinstalling libtinfo5... [ 2s] [16/46] preinstalling login... [ 2s] [17/46] preinstalling zlib1g... [ 2s] [18/46] preinstalling libstdc++6... [ 2s] [19/46] preinstalling libacl1... [ 2s] [20/46] preinstalling libncurses5... [ 2s] [21/46] preinstalling libselinux1... [ 2s] [22/46] preinstalling xz-utils... [ 2s] [23/46] preinstalling libnih-dbus1... [ 2s] [24/46] preinstalling lzma... [ 2s] [25/46] preinstalling passwd... [ 2s] [26/46] preinstalling tar... [ 2s] [27/46] preinstalling coreutils... [ 2s] [28/46] preinstalling upstart... [ 2s] [29/46] preinstalling dpkg... [ 2s] [30/46] preinstalling readline-common... [ 2s] [31/46] preinstalling gzip... [ 2s] [32/46] preinstalling perl-base... [ 2s] [33/46] preinstalling dash... [ 2s] [34/46] preinstalling gawk... [ 2s] [35/46] preinstalling grep... [ 2s] [36/46] preinstalling sed... [ 2s] [37/46] preinstalling base-files... [ 3s] [38/46] preinstalling debconf... [ 3s] [39/46] preinstalling libreadline5... [ 3s] [40/46] preinstalling perl... [ 3s] [41/46] preinstalling sysv-rc... [ 3s] [42/46] preinstalling tzdata... [ 3s] [43/46] preinstalling bash... [ 3s] [44/46] preinstalling initscripts... [ 3s] [45/46] preinstalling util-linux... [ 3s] [46/46] preinstalling initramfs-tools... [ 3s] [ 3s] running gawk postinstall script [ 3s] running sysv-rc preinstall script [ 3s] running sysv-rc postinstall script [ 3s] running base-files preinstall script [ 3s] dpkg-maintscript-helper: error: couldn't identify the package [ 3s] running base-files postinstall script [ 3s] chown: invalid user: 'root:root' [ 3s] running base-passwd postinstall script [ 3s] Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/Debconf/Config.pm line 22. [ 3s] debconf: unable to initialize frontend: Dialog [ 3s] debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) [ 3s] debconf: falling back to frontend: Readline [ 3s] debconf: unable to initialize frontend: Readline [ 3s] debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) [ 3s] debconf: falling back to frontend: Teletype [ 3s] update-passwd: error while loading shared libraries: libdebconfclient.so.0: cannot open shared object file: No such file or directory [ 3s] update-passwd: error while loading shared libraries: libdebconfclient.so.0: cannot open shared object file: No such file or directory [ 3s] running passwd preinstall script [ 3s] running passwd postinstall script [ 3s] Shadow passwords are now on. [ 4s] reordering...cycle: libc6 -> libgcc1 [ 4s] breaking dependency libgcc1 -> libc6 [ 4s] cycle: libc6 -> libgcc1 -> multiarch-support [ 4s] breaking dependency multiarch-support -> libc6 [ 4s] cycle: perl -> perl-modules [ 4s] breaking dependency perl -> perl-modules [ 4s] cycle: python3-extras -> python3-testtools [ 4s] breaking dependency python3-extras -> python3-testtools [ 4s] cycle: sysv-rc -> sysvinit-utils [ 4s] breaking dependency sysvinit-utils -> sysv-rc [ 4s] cycle: python-extras -> python-testtools [ 4s] breaking dependency python-testtools -> python-extras [ 4s] cycle: initscripts -> upstart [ 4s] breaking dependency upstart -> initscripts [ 4s] cycle: ifupdown -> initscripts -> upstart [ 4s] breaking dependency upstart -> ifupdown [ 4s] done [ 4s] [1/239] installing autotools-dev-20130810.1 [ 4s] linking /sbin/start to /bin/true [ 4s] [2/239] installing dh-apparmor-2.8.95~2430-0ubuntu5 [ 4s] [3/239] installing dh-python-1.20140128-1ubuntu8 [ 4s] dpkg: dh-python: dependency problems, but configuring anyway as you requested: [ 4s] dh-python depends on python3:any (>= 3.3.2-2~). [ 4s] [4/239] installing gcc-4.8-base-4.8.2-19ubuntu1 [ 5s] [5/239] installing gcc-4.9-base-4.9-20140406-0ubuntu1 [ 5s] [6/239] installing libaudit-common-1:2.3.2-2ubuntu1 [ 5s] [7/239] installing libbison-dev-2:3.0.2.dfsg-2 [ 5s] [8/239] installing libfl-dev-2.5.35-10.1ubuntu2 [ 5s] [9/239] installing libjs-jquery-1.7.2+dfsg-2ubuntu1 [ 5s] [10/239] installing libjs-underscore-1.4.4-2ubuntu1 [ 6s] [11/239] installing libklibc-2.0.3-0ubuntu1 [ 6s] [12/239] installing libpython2.7-minimal-2.7.6-8 [ 6s] [13/239] installing libsemanage-common-2.2-1 [ 6s] [14/239] installing linux-libc-dev-3.13.0-24.46 [ 7s] [15/239] installing lsb-base-4.1+Debian11ubuntu6 [ 7s] [16/239] installing mime-support-3.54ubuntu1 [ 7s] update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode [ 7s] [17/239] installing ncurses-base-5.9+20140118-1ubuntu1 [ 7s] [18/239] installing openstack-pkg-tools-8 [ 8s] [19/239] installing python-monotonic-0.6-2 [ 8s] dpkg: python-monotonic: dependency problems, but configuring anyway as you requested: [ 8s] python-monotonic depends on python:any (>= 2.7.5-5~). [ 8s] python-monotonic depends on python:any (<< 2.8). [ 8s] [20/239] installing python-pkg-resources-3.3-1ubuntu1 [ 8s] dpkg: python-pkg-resources: dependency problems, but configuring anyway as you requested: [ 8s] python-pkg-resources depends on python:any (>= 2.7). [ 8s] python-pkg-resources depends on python:any (<< 2.8). [ 8s] [21/239] installing python-six-1.10.0-3 [ 8s] dpkg: python-six: dependency problems, but configuring anyway as you requested: [ 8s] python-six depends on python:any (>= 2.7.5-5~). [ 8s] python-six depends on python:any (<< 2.8). [ 8s] [22/239] installing python3-mimeparse-0.1.4-1build1 [ 8s] [23/239] installing python3-monotonic-0.6-2 [ 9s] dpkg: python3-monotonic: dependency problems, but configuring anyway as you requested: [ 9s] python3-monotonic depends on python3:any (>= 3.3.2-2~). [ 9s] [24/239] installing python3-pkg-resources-3.3-1ubuntu1 [ 9s] dpkg: python3-pkg-resources: dependency problems, but configuring anyway as you requested: [ 9s] python3-pkg-resources depends on python3:any (>= 3.4). [ 9s] python3-pkg-resources depends on python3:any (<< 3.5). [ 9s] [25/239] installing python3-six-1.10.0-3 [ 9s] dpkg: python3-six: dependency problems, but configuring anyway as you requested: [ 9s] python3-six depends on python3:any (>= 3.4~). [ 9s] [26/239] installing sensible-utils-0.0.9 [ 9s] Processing triggers for mime-support (3.54ubuntu1) ... [ 9s] [27/239] installing vim-runtime-2:7.4.052-1ubuntu3 [ 9s] Adding 'diversion of /usr/share/vim/vim74/doc/help.txt to /usr/share/vim/vim74/doc/help.txt.vim-tiny by vim-runtime' [ 9s] Adding 'diversion of /usr/share/vim/vim74/doc/tags to /usr/share/vim/vim74/doc/tags.vim-tiny by vim-runtime' [ 10s] [28/239] installing klibc-utils-2.0.3-0ubuntu1 [ 10s] [29/239] installing python-setuptools-3.3-1ubuntu1 [ 11s] dpkg: python-setuptools: dependency problems, but configuring anyway as you requested: [ 11s] python-setuptools depends on python:any (>= 2.7). [ 11s] python-setuptools depends on python:any (<< 2.8). [ 11s] [30/239] installing python3-setuptools-3.3-1ubuntu1 [ 11s] dpkg: python3-setuptools: dependency problems, but configuring anyway as you requested: [ 11s] python3-setuptools depends on python3:any (>= 3.4). [ 11s] python3-setuptools depends on python3:any (<< 3.5). [ 11s] [31/239] installing libjs-sphinxdoc-1.2.2+dfsg-1ubuntu1 [ 11s] [32/239] installing sphinx-common-1.2.2+dfsg-1ubuntu1 [ 12s] [33/239] installing multiarch-support-2.19-0ubuntu6 [ 12s] dpkg: multiarch-support: dependency problems, but configuring anyway as you requested: [ 12s] multiarch-support depends on libc6 (>= 2.13-5); however: [ 12s] Package libc6 is not installed. [ 12s] [34/239] installing libgcc1-1:4.9-20140406-0ubuntu1 [ 12s] dpkg: libgcc1:i386: dependency problems, but configuring anyway as you requested: [ 12s] libgcc1:i386 depends on libc6 (>= 2.2.4); however: [ 12s] Package libc6 is not installed. [ 12s] [35/239] installing libc6-2.19-0ubuntu6 [ 13s] [36/239] installing bsdutils-1:2.20.1-5.1ubuntu20 [ 13s] [37/239] installing busybox-initramfs-1:1.21.0-1ubuntu1 [ 13s] [38/239] installing cpio-2.11+dfsg-1ubuntu1 [ 13s] update-alternatives: using /bin/mt-gnu to provide /bin/mt (mt) in auto mode [ 14s] [39/239] installing diffutils-1:3.3-1 [ 14s] [40/239] installing findutils-4.4.2-7 [ 14s] [41/239] installing hostname-3.15ubuntu1 [ 14s] [42/239] installing insserv-1.14.0-5ubuntu2 [ 14s] [43/239] installing libc-dev-bin-2.19-0ubuntu6 [ 15s] [44/239] installing libfakeroot-1.20-3ubuntu2 [ 15s] [45/239] installing locales-2.13+git20120306-12 [ 15s] [46/239] installing make-3.81-8.2ubuntu3 [ 16s] [47/239] installing net-tools-1.60-25ubuntu2 [ 16s] [48/239] installing patch-2.7.1-4 [ 16s] [49/239] installing strace-4.8-1ubuntu5 [ 16s] [50/239] installing vim-common-2:7.4.052-1ubuntu3 [ 16s] Processing triggers for mime-support (3.54ubuntu1) ... [ 17s] [51/239] installing debianutils-4.4 [ 17s] [52/239] installing libattr1-1:2.4.47-1ubuntu1 [ 17s] [53/239] installing libbsd0-0.6.0-2ubuntu1 [ 17s] [54/239] installing libbz2-1.0-1.0.6-5 [ 17s] [55/239] installing libcap2-1:2.24-0ubuntu2 [ 18s] [56/239] installing libcomerr2-1.42.9-3ubuntu1 [ 18s] [57/239] installing libdb5.3-5.3.28-3ubuntu3 [ 18s] [58/239] installing libdbus-1-3-1.6.18-0ubuntu4 [ 18s] [59/239] installing libdebconfclient0-0.187ubuntu1 [ 19s] [60/239] installing libexpat1-2.1.0-4ubuntu1 [ 19s] [61/239] installing libffi6-3.1~rc1+r3.0.13-12 [ 19s] [62/239] installing libgmp10-2:5.1.3+dfsg-1ubuntu1 [ 19s] [63/239] installing libgpm2-1.20.4-6.1 [ 20s] [64/239] installing libjson-c2-0.11-3ubuntu1 [ 20s] [65/239] installing libkeyutils1-1.5.6-1 [ 20s] [66/239] installing libkmod2-15-0ubuntu6 [ 20s] [67/239] installing libkrb5support0-1.12+dfsg-2ubuntu4 [ 20s] [68/239] installing liblzma5-5.1.1alpha+20120614-2ubuntu2 [ 21s] [69/239] installing libmpdec2-2.4.0-6 [ 21s] [70/239] installing libnih1-1.0.3-4ubuntu25 [ 21s] [71/239] installing libpcre3-1:8.31-2ubuntu2 [ 21s] [72/239] installing libpipeline1-1.3.0-1 [ 22s] [73/239] installing libprocps3-1:3.3.9-1ubuntu2 [ 22s] [74/239] installing libsepol1-2.2-1 [ 23s] [75/239] installing libsigsegv2-2.10-2 [ 23s] [76/239] installing libslang2-2.2.4-15ubuntu1 [ 24s] [77/239] installing libsqlite3-0-3.8.2-1ubuntu2 [ 24s] [78/239] installing libtinfo5-5.9+20140118-1ubuntu1 [ 24s] [79/239] installing libunistring0-0.9.3-5ubuntu3 [ 24s] [80/239] installing libustr-1.0-1-1.0.4-3ubuntu2 [ 25s] [81/239] installing zlib1g-1:1.2.8.dfsg-1ubuntu1 [ 25s] [82/239] installing libatomic1-4.8.2-19ubuntu1 [ 25s] [83/239] installing libaudit1-1:2.3.2-2ubuntu1 [ 25s] [84/239] installing libgomp1-4.8.2-19ubuntu1 [ 25s] [85/239] installing libitm1-4.8.2-19ubuntu1 [ 26s] [86/239] installing libquadmath0-4.8.2-19ubuntu1 [ 26s] [87/239] installing libasan0-4.8.2-19ubuntu1 [ 26s] [88/239] installing libstdc++6-4.8.2-19ubuntu1 [ 26s] [89/239] installing libjson0-0.11-3ubuntu1 [ 27s] [90/239] installing base-passwd-3.5.33 [ 27s] [91/239] installing binutils-2.24-5ubuntu3 [ 27s] [92/239] installing bzip2-1.0.6-5 [ 28s] [93/239] installing fakeroot-1.20-3ubuntu2 [ 28s] update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode [ 28s] [94/239] installing iproute2-3.12.0-2 [ 28s] [95/239] installing libc-bin-2.19-0ubuntu6 [ 28s] [96/239] installing m4-1.4.17-2ubuntu1 [ 29s] [97/239] installing psmisc-22.20-1ubuntu2 [ 29s] [98/239] installing unzip-6.0-9ubuntu1 [ 29s] Processing triggers for mime-support (3.54ubuntu1) ... [ 29s] [99/239] installing xz-utils-5.1.1alpha+20120614-2ubuntu2 [ 29s] update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode [ 29s] [100/239] installing groff-base-1.22.2-5 [ 30s] Processing triggers for mime-support (3.54ubuntu1) ... [ 30s] [101/239] installing less-458-2 [ 30s] Processing triggers for mime-support (3.54ubuntu1) ... [ 30s] [102/239] installing libacl1-2.2.52-1 [ 30s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 30s] [103/239] installing libasprintf0c2-0.18.3.1-1ubuntu2 [ 30s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 30s] [104/239] installing libc6-dev-2.19-0ubuntu6 [ 31s] [105/239] installing libisl10-0.12.2-1 [ 31s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 31s] [106/239] installing libk5crypto3-1.12+dfsg-2ubuntu4 [ 31s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 31s] [107/239] installing libmagic1-1:5.14-2ubuntu3 [ 32s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 32s] [108/239] installing libmpfr4-3.1.2-1 [ 32s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 32s] [109/239] installing libncurses5-5.9+20140118-1ubuntu1 [ 32s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 32s] [110/239] installing libncursesw5-5.9+20140118-1ubuntu1 [ 32s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 33s] [111/239] installing libpng12-0-1.2.50-1ubuntu2 [ 33s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 33s] [112/239] installing libselinux1-2.2.2-1 [ 34s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 34s] [113/239] installing lzma-9.22-2ubuntu2 [ 34s] update-alternatives: using /usr/bin/lzmp to provide /usr/bin/lzma (lzma) in auto mode [ 34s] [114/239] installing python2.7-minimal-2.7.6-8 [ 35s] [115/239] installing bsdmainutils-9.0.5ubuntu1 [ 35s] update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode [ 35s] update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode [ 35s] [116/239] installing libnih-dbus1-1.0.3-4ubuntu25 [ 35s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 36s] [117/239] installing libxml2-2.9.1+dfsg1-3ubuntu4 [ 36s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 36s] [118/239] installing libgcc-4.8-dev-4.8.2-19ubuntu1 [ 36s] [119/239] installing makedev-2.3.1-93ubuntu1 [ 38s] [120/239] installing file-1:5.14-2ubuntu3 [ 38s] [121/239] installing gettext-base-0.18.3.1-1ubuntu2 [ 39s] [122/239] installing bison-2:3.0.2.dfsg-2 [ 39s] update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode [ 39s] [123/239] installing libplymouth2-0.8.8-0ubuntu17 [ 39s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 39s] [124/239] installing sysvinit-utils-2.88dsf-41ubuntu6 [ 39s] dpkg: sysvinit-utils: dependency problems, but configuring anyway as you requested: [ 39s] sysvinit-utils depends on sysv-rc (>= 2.88dsf-24) | file-rc (>= 0.8.16); however: [ 39s] Package sysv-rc is not installed. [ 39s] Package file-rc is not installed. [ 39s] [125/239] installing tar-1.27.1-1 [ 39s] update-alternatives: using /usr/sbin/rmt-tar to provide /usr/sbin/rmt (rmt) in auto mode [ 39s] Processing triggers for mime-support (3.54ubuntu1) ... [ 39s] [126/239] installing coreutils-8.21-1ubuntu5 [ 40s] [127/239] installing libcgmanager0-0.24-0ubuntu5 [ 40s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 40s] [128/239] installing libcloog-isl4-0.18.2-1 [ 40s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 40s] [129/239] installing libmpc3-1.0.1-1ubuntu1 [ 40s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 41s] [130/239] installing libstdc++-4.8-dev-4.8.2-19ubuntu1 [ 41s] [131/239] installing libglib2.0-0-2.40.0-2 [ 41s] No schema files found: doing nothing. [ 41s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 41s] [132/239] installing libkrb5-3-1.12+dfsg-2ubuntu4 [ 42s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 42s] [133/239] installing libsemanage1-2.2-1 [ 42s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 42s] [134/239] installing libcroco3-0.6.8-2ubuntu1 [ 42s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 42s] [135/239] [136/239] installing libgssapi-krb5-2-1.12+dfsg-2ubuntu4 [ 43s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 43s] [137/239] installing libudev1-204-5ubuntu20 [ 43s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 43s] [138/239] installing cpp-4.8-4.8.2-19ubuntu1 [ 44s] [139/239] installing cpp-4:4.8.2-1ubuntu6 [ 44s] [140/239] installing sgml-base-1.26+nmu4ubuntu1 [ 44s] [141/239] installing initramfs-tools-bin-0.103ubuntu4 [ 44s] [142/239] installing install-info-5.2.0.dfsg.1-2 [ 45s] [143/239] installing perl-base-5.18.2-2ubuntu1 [ 45s] [144/239] installing python-minimal-2.7.5-5ubuntu3 [ 45s] [145/239] installing python3-extras-0.0.3-2ubuntu1 [ 45s] dpkg: python3-extras: dependency problems, but configuring anyway as you requested: [ 45s] python3-extras depends on python3:any (>= 3.3.2-2~). [ 45s] python3-extras depends on python3-testtools; however: [ 45s] Package python3-testtools is not installed. [ 46s] [146/239] installing dash-0.5.7-4ubuntu1 [ 46s] Adding 'diversion of /bin/sh to /bin/sh.distrib by dash' [ 46s] Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' [ 46s] dpkg-query: no packages found matching bash [ 46s] [147/239] installing mountall-2.53 [ 46s] dpkg: mountall: dependency problems, but configuring anyway as you requested: [ 46s] mountall depends on udev; however: [ 46s] Package udev is not installed. [ 46s] mountall depends on plymouth; however: [ 46s] Package plymouth is not installed. [ 46s] [148/239] installing gcc-4.8-4.8.2-19ubuntu1 [ 47s] [149/239] installing debconf-1.5.51ubuntu2 [ 48s] [150/239] installing gcc-4:4.8.2-1ubuntu6 [ 48s] [151/239] installing readline-common-6.3-4ubuntu2 [ 48s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 48s] [152/239] installing gzip-1.6-3ubuntu1 [ 48s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 48s] [153/239] installing info-5.2.0.dfsg.1-2 [ 49s] update-alternatives: using /usr/bin/info to provide /usr/bin/infobrowser (infobrowser) in auto mode [ 49s] Processing triggers for mime-support (3.54ubuntu1) ... [ 49s] [154/239] installing python3-testtools-0.9.35-0ubuntu1 [ 49s] dpkg: python3-testtools: dependency problems, but configuring anyway as you requested: [ 49s] python3-testtools depends on python3:any (>= 3.3.2-2~). [ 49s] [155/239] installing grep-2.16-1 [ 49s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 49s] [156/239] installing libgdbm3-1.8.3-12build1 [ 49s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 49s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 50s] [157/239] installing sed-4.2.2-4ubuntu1 [ 50s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 50s] [158/239] installing gettext-0.18.3.1-1ubuntu2 [ 50s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 50s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 50s] [159/239] installing g++-4.8-4.8.2-19ubuntu1 [ 51s] [160/239] installing upstart-1.12.1-0ubuntu4 [ 51s] dpkg: upstart: dependency problems, but configuring anyway as you requested: [ 51s] upstart depends on initscripts; however: [ 51s] Package initscripts is not installed. [ 51s] upstart depends on ifupdown (>= 0.6.10ubuntu5); however: [ 51s] Package ifupdown is not installed. [ 52s] linking /sbin/start to /bin/true [ 52s] [161/239] installing tzdata-2014b-1 [ 52s] Current default time zone: 'Etc/UTC' [ 52s] Local time is now: Wed May 10 06:02:53 UTC 2017. [ 52s] Universal Time is now: Wed May 10 06:02:53 UTC 2017. [ 52s] Run 'dpkg-reconfigure tzdata' if you wish to change it. [ 52s] [162/239] installing ucf-3.0027+nmu1 [ 52s] Moving old data out of the way [ 53s] [163/239] installing xml-core-0.13+nmu2 [ 53s] Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... [ 53s] [164/239] installing libssl1.0.0-1.0.1f-1ubuntu2 [ 53s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 54s] [165/239] installing sysv-rc-2.88dsf-41ubuntu6 [ 54s] [166/239] installing g++-4:4.8.2-1ubuntu6 [ 54s] update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode [ 54s] [167/239] installing libpam0g-1.1.8-1ubuntu2 [ 54s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 54s] [168/239] installing libreadline5-5.2+dfsg-2 [ 55s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 55s] [169/239] installing libreadline6-6.3-4ubuntu2 [ 55s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 55s] [170/239] installing flex-2.5.35-10.1ubuntu2 [ 55s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 55s] [171/239] installing libtool-2.4.2-1.7ubuntu1 [ 55s] [172/239] installing perl-5.18.2-2ubuntu1 [ 56s] dpkg: perl: dependency problems, but configuring anyway as you requested: [ 56s] perl depends on perl-modules (>= 5.18.2-2ubuntu1); however: [ 56s] Package perl-modules is not installed. [ 56s] update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode [ 56s] [173/239] installing man-db-2.6.7.1-1 [ 56s] Building database of manual pages ... [ 59s] [174/239] installing libintl-perl-1.23-1build1 [ 59s] Processing triggers for man-db (2.6.7.1-1) ... [ 60s] [175/239] installing libtext-unidecode-perl-0.04-2 [ 60s] Processing triggers for man-db (2.6.7.1-1) ... [ 60s] [176/239] installing libtimedate-perl-2.3000-1 [ 60s] Processing triggers for man-db (2.6.7.1-1) ... [ 60s] [177/239] installing libxml-namespacesupport-perl-1.11-1 [ 60s] Processing triggers for man-db (2.6.7.1-1) ... [ 60s] [178/239] installing libxml-sax-base-perl-1.07-1 [ 61s] Processing triggers for man-db (2.6.7.1-1) ... [ 61s] [179/239] installing perl-modules-5.18.2-2ubuntu1 [ 61s] [180/239] installing docutils-common-0.11-3 [ 62s] Processing triggers for man-db (2.6.7.1-1) ... [ 62s] Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... [ 62s] [181/239] installing intltool-debian-0.35.0+20060710.1 [ 62s] [182/239] installing autoconf-2.69-6 [ 62s] Processing triggers for man-db (2.6.7.1-1) ... [ 63s] [183/239] installing libpython3.4-minimal-3.4.0-2ubuntu1 [ 63s] [184/239] installing gawk-1:4.0.1+dfsg-2.1ubuntu2 [ 63s] Processing triggers for man-db (2.6.7.1-1) ... [ 63s] [185/239] installing kmod-15-0ubuntu6 [ 64s] Processing triggers for man-db (2.6.7.1-1) ... [ 64s] [186/239] installing libpam-modules-bin-1.1.8-1ubuntu2 [ 64s] Processing triggers for man-db (2.6.7.1-1) ... [ 64s] [187/239] installing libpython2.7-stdlib-2.7.6-8 [ 65s] [188/239] installing base-files-7.2ubuntu5 [ 65s] Processing triggers for man-db (2.6.7.1-1) ... [ 65s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 65s] [189/239] installing libpython-stdlib-2.7.5-5ubuntu3 [ 66s] [190/239] installing automake-1:1.14.1-2ubuntu1 [ 66s] update-alternatives: using /usr/bin/automake-1.14 to provide /usr/bin/automake (automake) in auto mode [ 66s] Processing triggers for man-db (2.6.7.1-1) ... [ 66s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 66s] [191/239] installing libdpkg-perl-1.17.5ubuntu5 [ 66s] Processing triggers for man-db (2.6.7.1-1) ... [ 67s] [192/239] installing module-init-tools-15-0ubuntu6 [ 67s] [193/239] installing po-debconf-1.0.16+nmu2ubuntu1 [ 67s] Processing triggers for man-db (2.6.7.1-1) ... [ 67s] [194/239] installing python2.7-2.7.6-8 [ 68s] Processing triggers for man-db (2.6.7.1-1) ... [ 69s] Processing triggers for mime-support (3.54ubuntu1) ... [ 69s] [195/239] installing libpython2.7-2.7.6-8 [ 69s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 69s] [196/239] installing libxml-sax-perl-0.99+dfsg-2ubuntu1 [ 69s] update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... [ 69s] update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... [ 70s] Processing triggers for man-db (2.6.7.1-1) ... [ 70s] [197/239] installing python3.4-minimal-3.4.0-2ubuntu1 [ 71s] Processing triggers for man-db (2.6.7.1-1) ... [ 71s] [198/239] installing libpam-modules-1.1.8-1ubuntu2 [ 71s] Processing triggers for man-db (2.6.7.1-1) ... [ 72s] [199/239] installing libpython3.4-stdlib-3.4.0-2ubuntu1 [ 72s] [200/239] installing libpython3-stdlib-3.4.0-0ubuntu2 [ 72s] [201/239] installing libpam-runtime-1.1.8-1ubuntu2 [ 72s] Processing triggers for man-db (2.6.7.1-1) ... [ 73s] [202/239] installing python3-minimal-3.4.0-0ubuntu2 [ 73s] Processing triggers for man-db (2.6.7.1-1) ... [ 74s] [203/239] installing python-2.7.5-5ubuntu3 [ 74s] Processing triggers for man-db (2.6.7.1-1) ... [ 74s] [204/239] installing python3.4-3.4.0-2ubuntu1 [ 75s] Processing triggers for man-db (2.6.7.1-1) ... [ 75s] Processing triggers for mime-support (3.54ubuntu1) ... [ 76s] [205/239] installing bash-4.3-6ubuntu1 [ 76s] update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode [ 76s] Processing triggers for man-db (2.6.7.1-1) ... [ 76s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 76s] [206/239] installing libxml-libxml-perl-2.0108+dfsg-1 [ 76s] update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... [ 77s] update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... [ 77s] update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... [ 77s] Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version [ 77s] Processing triggers for man-db (2.6.7.1-1) ... [ 77s] [207/239] installing passwd-1:4.1.5.1-1ubuntu9 [ 77s] Shadow passwords are now on. [ 77s] Processing triggers for man-db (2.6.7.1-1) ... [ 78s] [208/239] installing dpkg-dev-1.17.5ubuntu5 [ 78s] Processing triggers for man-db (2.6.7.1-1) ... [ 78s] [209/239] installing vim-2:7.4.052-1ubuntu3 [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vim (vim) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vimdiff (vimdiff) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/rvim (rvim) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/rview (rview) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vi (vi) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/view (view) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/ex (ex) in auto mode [ 79s] update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/editor (editor) in auto mode [ 79s] [210/239] installing python-mimeparse-0.1.4-1build1 [ 79s] [211/239] installing python-pygments-1.6+dfsg-1ubuntu1 [ 80s] Processing triggers for man-db (2.6.7.1-1) ... [ 80s] [212/239] installing python-roman-2.0.0-1 [ 81s] [213/239] installing python-all-2.7.5-5ubuntu3 [ 81s] [214/239] installing python-concurrent.futures-2.1.6-3 [ 81s] [215/239] installing python-markupsafe-0.18-1build2 [ 81s] [216/239] installing python-nose-1.3.1-2 [ 82s] Processing triggers for man-db (2.6.7.1-1) ... [ 82s] [217/239] installing adduser-3.113+nmu3ubuntu3 [ 82s] Processing triggers for man-db (2.6.7.1-1) ... [ 83s] [218/239] installing libuuid1-2.20.1-5.1ubuntu20 [ 83s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 83s] [219/239] installing login-1:4.1.5.1-1ubuntu9 [ 83s] dpkg: error: --compare-versions takes three arguments: [ 83s] Type dpkg --help for help about installing and deinstalling packages [*]; [ 83s] Use 'apt' or 'aptitude' for user-friendly package management; [ 83s] Type dpkg -Dhelp for a list of dpkg debug flag values; [ 83s] Type dpkg --force-help for a list of forcing options; [ 83s] Type dpkg-deb --help for help about manipulating *.deb files; [ 83s] Options marked [*] produce a lot of output - pipe it through 'less' or 'more' ! [ 83s] Processing triggers for man-db (2.6.7.1-1) ... [ 84s] [220/239] installing python3-3.4.0-0ubuntu2 [ 84s] Processing triggers for man-db (2.6.7.1-1) ... [ 85s] [221/239] installing texinfo-5.2.0.dfsg.1-2 [ 85s] Processing triggers for man-db (2.6.7.1-1) ... [ 85s] [222/239] installing build-essential-11.6ubuntu6 [ 85s] [223/239] installing debhelper-9.20131227ubuntu1 [ 85s] Processing triggers for man-db (2.6.7.1-1) ... [ 86s] [224/239] installing python-jinja2-2.7.2-2 [ 86s] [225/239] installing python3-all-3.4.0-0ubuntu2 [ 87s] [226/239] installing python3-nose-1.3.1-2 [ 87s] Processing triggers for man-db (2.6.7.1-1) ... [ 88s] [227/239] installing libblkid1-2.20.1-5.1ubuntu20 [ 88s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 88s] [228/239] installing python-docutils-0.11-3 [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode [ 88s] update-alternatives: using /usr/share/docutils/scripts/python2/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode [ 89s] [229/239] installing python-testtools-0.9.35-0ubuntu1 [ 89s] dpkg: python-testtools: dependency problems, but configuring anyway as you requested: [ 89s] python-testtools depends on python-extras; however: [ 89s] Package python-extras is not installed. [ 89s] [230/239] installing cvs-2:1.12.13+real-12 [ 89s] Allowing use of questionable username. [ 89s] Adding group `_cvsadmin' (GID 102) ... [ 90s] Done. [ 90s] Processing triggers for man-db (2.6.7.1-1) ... [ 90s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 90s] [231/239] installing python-extras-0.0.3-2ubuntu1 [ 90s] [232/239] installing libmount1-2.20.1-5.1ubuntu20 [ 90s] Processing triggers for libc-bin (2.19-0ubuntu6) ... [ 91s] [233/239] installing python-sphinx-1.2.2+dfsg-1ubuntu1 [ 91s] Processing triggers for sphinx-common (1.2.2+dfsg-1ubuntu1) ... [ 91s] [234/239] installing util-linux-2.20.1-5.1ubuntu20 [ 91s] Processing triggers for man-db (2.6.7.1-1) ... [ 92s] Processing triggers for install-info (5.2.0.dfsg.1-2) ... [ 92s] Processing triggers for mime-support (3.54ubuntu1) ... [ 92s] [235/239] installing mount-2.20.1-5.1ubuntu20 [ 92s] Processing triggers for man-db (2.6.7.1-1) ... [ 92s] [236/239] installing initramfs-tools-0.103ubuntu4 [ 92s] dpkg: initramfs-tools: dependency problems, but configuring anyway as you requested: [ 92s] initramfs-tools depends on udev (>= 147~-5); however: [ 92s] Package udev is not installed. [ 92s] update-initramfs: deferring update (trigger activated) [ 93s] Processing triggers for man-db (2.6.7.1-1) ... [ 93s] Processing triggers for initramfs-tools (0.103ubuntu4) ... [ 93s] [237/239] installing initscripts-2.88dsf-41ubuntu6 [ 93s] guest environment detected: Linking /dev/shm to /run/shm [ 93s] Generating /run/motd.dynamic; this may take a moment... [ 93s] initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused [ 93s] Processing triggers for man-db (2.6.7.1-1) ... [ 94s] [238/239] installing ifupdown-0.7.47.2ubuntu4 [ 94s] Creating /etc/network/interfaces. [ 94s] Processing triggers for man-db (2.6.7.1-1) ... [ 94s] [239/239] installing procps-1:3.3.9-1ubuntu2 [ 94s] update-alternatives: using /usr/bin/w.procps to provide /usr/bin/w (w) in auto mode [ 94s] initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused [ 94s] * Setting kernel variables ... [ 94s] ...done. [ 94s] Processing triggers for man-db (2.6.7.1-1) ... [ 95s] configuring all installed packages... [ 95s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 95s] now finalizing build dir... [ 95s] dpkg-source: warning: extracting unsigned source package (/usr/src/packages/SOURCES/python-fasteners_0.12.0-2ubuntu1.dsc) [ 95s] dpkg-source: info: extracting python-fasteners in /usr/src/packages/BUILD [ 95s] dpkg-source: info: unpacking python-fasteners_0.12.0.orig.tar.xz [ 95s] dpkg-source: info: unpacking python-fasteners_0.12.0-2ubuntu1.debian.tar.gz [ 95s] ----------------------------------------------------------------- [ 95s] ----- building python-fasteners_0.12.0-2ubuntu1.dsc (user abuild) [ 95s] ----------------------------------------------------------------- [ 95s] ----------------------------------------------------------------- [ 95s] dpkg-buildpackage: source package python-fasteners [ 95s] dpkg-buildpackage: source version 0.12.0-2ubuntu1 [ 95s] dpkg-buildpackage: source distribution xenial [ 95s] dpkg-buildpackage: source changed by James Page [ 95s] dpkg-source --before-build BUILD [ 95s] dpkg-buildpackage: host architecture i386 [ 95s] dpkg-source: info: using options from BUILD/debian/source/options: --extend-diff-ignore=^[^/]*[.]egg-info/ [ 95s] fakeroot debian/rules clean [ 96s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 96s] pyversions: missing debian/pyversions file, fall back to supported versions [ 96s] py3versions: no X-Python3-Version in control file, using supported versions [ 96s] dh clean --buildsystem=python_distutils --with python2,python3 [ 96s] dh_testdir -O--buildsystem=python_distutils [ 96s] dh_auto_clean -O--buildsystem=python_distutils [ 96s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 96s] pyversions: missing debian/pyversions file, fall back to supported versions [ 96s] running clean [ 96s] 'build/lib.linux-i686-2.7' does not exist -- can't clean it [ 96s] 'build/bdist.linux-i686' does not exist -- can't clean it [ 96s] 'build/scripts-2.7' does not exist -- can't clean it [ 96s] debian/rules override_dh_clean [ 96s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 96s] pyversions: missing debian/pyversions file, fall back to supported versions [ 96s] py3versions: no X-Python3-Version in control file, using supported versions [ 96s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 96s] dh_clean -O--buildsystem=python_distutils [ 96s] rm -rf build [ 96s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 96s] dpkg-source -b BUILD [ 96s] dpkg-source: info: using options from BUILD/debian/source/options: --extend-diff-ignore=^[^/]*[.]egg-info/ [ 96s] dpkg-source: info: using source format `3.0 (quilt)' [ 96s] dpkg-source: info: building python-fasteners using existing ./python-fasteners_0.12.0.orig.tar.xz [ 96s] dpkg-source: info: building python-fasteners in python-fasteners_0.12.0-2ubuntu1.debian.tar.gz [ 96s] dpkg-source: info: building python-fasteners in python-fasteners_0.12.0-2ubuntu1.dsc [ 96s] debian/rules build [ 96s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 96s] pyversions: missing debian/pyversions file, fall back to supported versions [ 96s] py3versions: no X-Python3-Version in control file, using supported versions [ 96s] dh build --buildsystem=python_distutils --with python2,python3 [ 97s] dh_testdir -O--buildsystem=python_distutils [ 97s] dh_auto_configure -O--buildsystem=python_distutils [ 97s] dh_auto_build -O--buildsystem=python_distutils [ 97s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 97s] pyversions: missing debian/pyversions file, fall back to supported versions [ 97s] running build [ 97s] running build_py [ 97s] creating build [ 97s] creating build/lib.linux-i686-2.7 [ 97s] creating build/lib.linux-i686-2.7/fasteners [ 97s] copying fasteners/test.py -> build/lib.linux-i686-2.7/fasteners [ 97s] copying fasteners/version.py -> build/lib.linux-i686-2.7/fasteners [ 97s] copying fasteners/_utils.py -> build/lib.linux-i686-2.7/fasteners [ 97s] copying fasteners/process_lock.py -> build/lib.linux-i686-2.7/fasteners [ 97s] copying fasteners/lock.py -> build/lib.linux-i686-2.7/fasteners [ 97s] copying fasteners/__init__.py -> build/lib.linux-i686-2.7/fasteners [ 97s] creating build/lib.linux-i686-2.7/fasteners/tests [ 97s] copying fasteners/tests/test_process_lock.py -> build/lib.linux-i686-2.7/fasteners/tests [ 97s] copying fasteners/tests/test_helpers.py -> build/lib.linux-i686-2.7/fasteners/tests [ 97s] copying fasteners/tests/__init__.py -> build/lib.linux-i686-2.7/fasteners/tests [ 97s] copying fasteners/tests/test_decorators.py -> build/lib.linux-i686-2.7/fasteners/tests [ 97s] copying fasteners/tests/test_lock.py -> build/lib.linux-i686-2.7/fasteners/tests [ 97s] debian/rules override_dh_auto_test [ 97s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 97s] pyversions: missing debian/pyversions file, fall back to supported versions [ 97s] py3versions: no X-Python3-Version in control file, using supported versions [ 97s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 97s] set -e ; for pyvers in 2.7 ; do \ [ 97s] PYTHON=python$pyvers nosetests -v ; \ [ 97s] done [ 97s] fasteners.tests.test_decorators.DecoratorsTest.test_locked ... ok [ 97s] fasteners.tests.test_decorators.DecoratorsTest.test_many_locked ... ok [ 97s] fasteners.tests.test_decorators.DecoratorsTest.test_read_write_locked ... ok [ 97s] fasteners.tests.test_helpers.HelpersTest.test_try_lock ... ok [ 97s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_reader ... ok [ 97s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_reader_abort ... ok [ 97s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_reader_writer ... ok [ 97s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_writer ... ok [ 98s] fasteners.tests.test_lock.ReadWriteLockTest.test_multi_reader_multi_writer ... ok [ 98s] fasteners.tests.test_lock.ReadWriteLockTest.test_multi_reader_single_writer ... ok [ 99s] fasteners.tests.test_lock.ReadWriteLockTest.test_multi_writer ... ok [ 104s] fasteners.tests.test_lock.ReadWriteLockTest.test_no_concurrent_readers_writers ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_no_double_writers ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_reader_abort ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_reader_chaotic ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_reader_to_writer ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_single_reader_writer ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_abort ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_chaotic ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_reader_writer ... ok [ 109s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_to_reader ... ok [ 109s] fasteners.tests.test_process_lock.ProcessLockTest.test_bad_acquire ... ok [ 109s] fasteners.tests.test_process_lock.ProcessLockTest.test_bad_release ... ok [ 109s] fasteners.tests.test_process_lock.ProcessLockTest.test_interprocess_lock ... ok [ 109s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_acquire_release_file_lock ... ok [ 109s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_externally ... ok [ 110s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_externally_lock_dir_not_exist ... ok [ 110s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_file_exists ... ok [ 110s] fasteners.tests.test_process_lock.ProcessLockTest.test_nested_synchronized_external_works ... ok [ 110s] fasteners.tests.test_process_lock.ProcessLockTest.test_non_destructive ... ok [ 110s] [ 110s] ---------------------------------------------------------------------- [ 110s] Ran 30 tests in 12.669s [ 110s] [ 110s] OK [ 110s] set -e ; for pyvers in 3.4 ; do \ [ 110s] PYTHON=python$pyvers nosetests3 -v ; \ [ 110s] done [ 110s] fasteners.tests.test_decorators.DecoratorsTest.test_locked ... ok [ 110s] fasteners.tests.test_decorators.DecoratorsTest.test_many_locked ... ok [ 110s] fasteners.tests.test_decorators.DecoratorsTest.test_read_write_locked ... ok [ 110s] fasteners.tests.test_helpers.HelpersTest.test_try_lock ... ok [ 110s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_reader ... ok [ 110s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_reader_abort ... ok [ 110s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_reader_writer ... ok [ 110s] fasteners.tests.test_lock.ReadWriteLockTest.test_double_writer ... ok [ 111s] fasteners.tests.test_lock.ReadWriteLockTest.test_multi_reader_multi_writer ... ok [ 111s] fasteners.tests.test_lock.ReadWriteLockTest.test_multi_reader_single_writer ... ok [ 112s] fasteners.tests.test_lock.ReadWriteLockTest.test_multi_writer ... ok [ 117s] fasteners.tests.test_lock.ReadWriteLockTest.test_no_concurrent_readers_writers ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_no_double_writers ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_reader_abort ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_reader_chaotic ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_reader_to_writer ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_single_reader_writer ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_abort ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_chaotic ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_reader_writer ... ok [ 122s] fasteners.tests.test_lock.ReadWriteLockTest.test_writer_to_reader ... ok [ 122s] fasteners.tests.test_process_lock.ProcessLockTest.test_bad_acquire ... ok [ 122s] fasteners.tests.test_process_lock.ProcessLockTest.test_bad_release ... ok [ 122s] fasteners.tests.test_process_lock.ProcessLockTest.test_interprocess_lock ... ok [ 122s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_acquire_release_file_lock ... ok [ 122s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_externally ... ok [ 123s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_externally_lock_dir_not_exist ... ok [ 123s] fasteners.tests.test_process_lock.ProcessLockTest.test_lock_file_exists ... ok [ 123s] fasteners.tests.test_process_lock.ProcessLockTest.test_nested_synchronized_external_works ... ok [ 123s] fasteners.tests.test_process_lock.ProcessLockTest.test_non_destructive ... ok [ 123s] [ 123s] ---------------------------------------------------------------------- [ 123s] Ran 30 tests in 12.959s [ 123s] [ 123s] OK [ 123s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 123s] fakeroot debian/rules binary [ 123s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 123s] pyversions: missing debian/pyversions file, fall back to supported versions [ 123s] py3versions: no X-Python3-Version in control file, using supported versions [ 123s] dh binary --buildsystem=python_distutils --with python2,python3 [ 123s] dh_testroot -O--buildsystem=python_distutils [ 123s] dh_prep -O--buildsystem=python_distutils [ 123s] debian/rules override_dh_auto_install [ 123s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 123s] pyversions: missing debian/pyversions file, fall back to supported versions [ 123s] py3versions: no X-Python3-Version in control file, using supported versions [ 123s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 123s] set -e ; for pyvers in 2.7; do \ [ 123s] python$pyvers setup.py install --install-layout=deb \ [ 123s] --root /usr/src/packages/BUILD/debian/python-fasteners; \ [ 123s] done [ 123s] running install [ 123s] running build [ 123s] running build_py [ 123s] running install_lib [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners/usr [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners/usr/lib [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7 [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] copying build/lib.linux-i686-2.7/fasteners/test.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] copying build/lib.linux-i686-2.7/fasteners/version.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] copying build/lib.linux-i686-2.7/fasteners/_utils.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] copying build/lib.linux-i686-2.7/fasteners/process_lock.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] copying build/lib.linux-i686-2.7/fasteners/lock.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] copying build/lib.linux-i686-2.7/fasteners/__init__.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners [ 123s] creating /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests [ 123s] copying build/lib.linux-i686-2.7/fasteners/tests/test_process_lock.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests [ 123s] copying build/lib.linux-i686-2.7/fasteners/tests/test_helpers.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests [ 123s] copying build/lib.linux-i686-2.7/fasteners/tests/__init__.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests [ 123s] copying build/lib.linux-i686-2.7/fasteners/tests/test_decorators.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests [ 123s] copying build/lib.linux-i686-2.7/fasteners/tests/test_lock.py -> /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/test.py to test.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/version.py to version.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/_utils.py to _utils.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/process_lock.py to process_lock.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/lock.py to lock.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/__init__.py to __init__.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests/test_process_lock.py to test_process_lock.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests/test_helpers.py to test_helpers.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests/__init__.py to __init__.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests/test_decorators.py to test_decorators.pyc [ 123s] byte-compiling /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners/tests/test_lock.py to test_lock.pyc [ 123s] running install_egg_info [ 123s] running egg_info [ 123s] creating fasteners.egg-info [ 123s] writing requirements to fasteners.egg-info/requires.txt [ 123s] writing fasteners.egg-info/PKG-INFO [ 123s] writing top-level names to fasteners.egg-info/top_level.txt [ 123s] writing dependency_links to fasteners.egg-info/dependency_links.txt [ 123s] writing manifest file 'fasteners.egg-info/SOURCES.txt' [ 123s] reading manifest file 'fasteners.egg-info/SOURCES.txt' [ 123s] reading manifest template 'MANIFEST.in' [ 123s] writing manifest file 'fasteners.egg-info/SOURCES.txt' [ 123s] Copying fasteners.egg-info to /usr/src/packages/BUILD/debian/python-fasteners/usr/lib/python2.7/dist-packages/fasteners-0.12.0.egg-info [ 123s] running install_scripts [ 123s] set -e ; for pyvers in 3.4; do \ [ 123s] python$pyvers setup.py install --install-layout=deb \ [ 123s] --root /usr/src/packages/BUILD/debian/python3-fasteners; \ [ 123s] done [ 124s] running install [ 124s] running build [ 124s] running build_py [ 124s] creating build/lib [ 124s] creating build/lib/fasteners [ 124s] copying fasteners/test.py -> build/lib/fasteners [ 124s] copying fasteners/version.py -> build/lib/fasteners [ 124s] copying fasteners/_utils.py -> build/lib/fasteners [ 124s] copying fasteners/process_lock.py -> build/lib/fasteners [ 124s] copying fasteners/lock.py -> build/lib/fasteners [ 124s] copying fasteners/__init__.py -> build/lib/fasteners [ 124s] creating build/lib/fasteners/tests [ 124s] copying fasteners/tests/test_process_lock.py -> build/lib/fasteners/tests [ 124s] copying fasteners/tests/test_helpers.py -> build/lib/fasteners/tests [ 124s] copying fasteners/tests/__init__.py -> build/lib/fasteners/tests [ 124s] copying fasteners/tests/test_decorators.py -> build/lib/fasteners/tests [ 124s] copying fasteners/tests/test_lock.py -> build/lib/fasteners/tests [ 124s] running install_lib [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners/usr [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3 [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] copying build/lib/fasteners/test.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] copying build/lib/fasteners/version.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] copying build/lib/fasteners/_utils.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] copying build/lib/fasteners/process_lock.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] copying build/lib/fasteners/lock.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] copying build/lib/fasteners/__init__.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners [ 124s] creating /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests [ 124s] copying build/lib/fasteners/tests/test_process_lock.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests [ 124s] copying build/lib/fasteners/tests/test_helpers.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests [ 124s] copying build/lib/fasteners/tests/__init__.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests [ 124s] copying build/lib/fasteners/tests/test_decorators.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests [ 124s] copying build/lib/fasteners/tests/test_lock.py -> /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/test.py to test.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/version.py to version.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/_utils.py to _utils.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/process_lock.py to process_lock.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/lock.py to lock.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/__init__.py to __init__.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests/test_process_lock.py to test_process_lock.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests/test_helpers.py to test_helpers.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests/__init__.py to __init__.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests/test_decorators.py to test_decorators.cpython-34.pyc [ 124s] byte-compiling /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners/tests/test_lock.py to test_lock.cpython-34.pyc [ 124s] running install_egg_info [ 124s] running egg_info [ 124s] writing dependency_links to fasteners.egg-info/dependency_links.txt [ 124s] writing requirements to fasteners.egg-info/requires.txt [ 124s] writing fasteners.egg-info/PKG-INFO [ 124s] writing top-level names to fasteners.egg-info/top_level.txt [ 124s] reading manifest file 'fasteners.egg-info/SOURCES.txt' [ 124s] reading manifest template 'MANIFEST.in' [ 124s] writing manifest file 'fasteners.egg-info/SOURCES.txt' [ 124s] Copying fasteners.egg-info to /usr/src/packages/BUILD/debian/python3-fasteners/usr/lib/python3/dist-packages/fasteners-0.12.0.egg-info [ 124s] running install_scripts [ 124s] rm -rf /usr/src/packages/BUILD/debian/python*-fasteners/usr/lib/python*/dist-packages/*.pth [ 124s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 124s] dh_installdocs -O--buildsystem=python_distutils [ 124s] debian/rules override_dh_installchangelogs [ 124s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 124s] pyversions: missing debian/pyversions file, fall back to supported versions [ 124s] py3versions: no X-Python3-Version in control file, using supported versions [ 124s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 124s] if [ -e /usr/src/packages/BUILD/debian/CHANGELOG ] ; then \ [ 124s] dh_installchangelogs /usr/src/packages/BUILD/debian/CHANGELOG ; \ [ 124s] else \ [ 124s] dh_installchangelogs ; \ [ 124s] fi [ 124s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 124s] dh_python2 -O--buildsystem=python_distutils [ 124s] dh_python3 -O--buildsystem=python_distutils [ 124s] debian/rules override_dh_installinit [ 124s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 124s] pyversions: missing debian/pyversions file, fall back to supported versions [ 124s] py3versions: no X-Python3-Version in control file, using supported versions [ 124s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 124s] if dpkg-vendor --derives-from ubuntu ; then \ [ 124s] for i in `ls -1 debian/*.upstart.in` ; do \ [ 124s] MYPKG=`echo $i | sed s/.upstart.in//` ; \ [ 124s] cp $MYPKG.upstart.in $MYPKG.upstart ; \ [ 124s] done ; \ [ 124s] fi [ 124s] ls: cannot access debian/*.upstart.in: No such file or directory [ 124s] dh_installinit --error-handler=true [ 125s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 125s] dh_link -O--buildsystem=python_distutils [ 125s] dh_compress -O--buildsystem=python_distutils [ 125s] dh_fixperms -O--buildsystem=python_distutils [ 125s] dh_installdeb -O--buildsystem=python_distutils [ 125s] debian/rules override_dh_gencontrol [ 125s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 125s] pyversions: missing debian/pyversions file, fall back to supported versions [ 125s] py3versions: no X-Python3-Version in control file, using supported versions [ 125s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 125s] if dpkg-vendor --derives-from ubuntu ; then \ [ 125s] dh_gencontrol -- -T/usr/src/packages/BUILD/debian/ubuntu_control_vars ; \ [ 125s] else \ [ 125s] dh_gencontrol -- -T/usr/src/packages/BUILD/debian/debian_control_vars ; \ [ 125s] fi [ 125s] dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe [ 125s] dpkg-gencontrol: warning: package python-fasteners: unused substitution variable ${python:Versions} [ 125s] dpkg-gencontrol: warning: package python-fasteners: unused substitution variable ${python:Provides} [ 125s] dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe [ 125s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 125s] dh_md5sums -O--buildsystem=python_distutils [ 125s] debian/rules override_dh_builddeb [ 125s] pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions [ 125s] pyversions: missing debian/pyversions file, fall back to supported versions [ 125s] py3versions: no X-Python3-Version in control file, using supported versions [ 125s] make[1]: Entering directory `/usr/src/packages/BUILD' [ 125s] dh_builddeb -- -Zxz -z9 [ 125s] dpkg-deb: warning: 'debian/python3-fasteners/DEBIAN/control' contains user-defined field 'Original-Maintainer' [ 125s] dpkg-deb: warning: ignoring 1 warning about the control file(s) [ 125s] [ 125s] dpkg-deb: building package `python3-fasteners' in `../python3-fasteners_0.12.0-2ubuntu1_all.deb'. [ 125s] dpkg-deb: warning: 'debian/python-fasteners/DEBIAN/control' contains user-defined field 'Original-Maintainer' [ 125s] dpkg-deb: warning: ignoring 1 warning about the control file(s) [ 125s] [ 125s] dpkg-deb: building package `python-fasteners' in `../python-fasteners_0.12.0-2ubuntu1_all.deb'. [ 125s] make[1]: Leaving directory `/usr/src/packages/BUILD' [ 125s] dpkg-genchanges >../python-fasteners_0.12.0-2ubuntu1_i386.changes [ 126s] dpkg-genchanges: not including original source code in upload [ 126s] dpkg-source --after-build BUILD [ 126s] dpkg-source: info: using options from BUILD/debian/source/options: --extend-diff-ignore=^[^/]*[.]egg-info/ [ 126s] dpkg-buildpackage: binary and diff upload (original source NOT included) [ 126s] Warning: mkbaselibs missing in build root, skipping baselibs [ 126s] [ 126s] obsnw20 finished "build python-fasteners_0.12.0-2ubuntu1.dsc" at Wed May 10 06:04:07 UTC 2017. [ 126s]