[ 0s] Memory limit set to 82441108KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw14 started "build _service:git-buildpackage:perl-Crypt-SSLeay.spec" at Fri Oct 11 01:55:48 UTC 2019. [ 0s] [ 0s] Building crypt-ssleay for project 'Tizen:Devbase:Tools' repository 'openSUSE_13.2' arch 'i586' srcmd5 '4e2a26125e054511fb2260815c33ccee' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:git-buildpackage:perl-Crypt-SSLeay.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:git-buildpackage:perl-Crypt-SSLeay.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:git-buildpackage:perl-Crypt-SSLeay.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 1s] [1/29] preinstalling filesystem... [ 1s] [2/29] preinstalling glibc... [ 1s] [3/29] preinstalling fillup... [ 1s] [4/29] preinstalling libattr1... [ 1s] [5/29] preinstalling libbz2-1... [ 1s] [6/29] preinstalling libcap2... [ 1s] [7/29] preinstalling libelf1... [ 1s] [8/29] preinstalling libgcc_s1... [ 1s] [9/29] preinstalling liblua5_1... [ 1s] [10/29] preinstalling liblzma5... [ 1s] [11/29] preinstalling libpcre1... [ 1s] [12/29] preinstalling libpopt0... [ 1s] [13/29] preinstalling libz1... [ 1s] [14/29] preinstalling attr... [ 1s] [15/29] preinstalling libacl1... [ 1s] [16/29] preinstalling libncurses5... [ 1s] [17/29] preinstalling libselinux1... [ 1s] [18/29] preinstalling libreadline6... [ 1s] [19/29] preinstalling bash... [ 1s] [20/29] preinstalling diffutils... [ 1s] [21/29] preinstalling m4... [ 1s] [22/29] preinstalling sed... [ 1s] [23/29] preinstalling tar... [ 1s] [24/29] preinstalling grep... [ 1s] [25/29] preinstalling coreutils... [ 1s] [26/29] preinstalling permissions... [ 1s] [27/29] preinstalling aaa_base... [ 1s] [28/29] preinstalling rpm... [ 2s] [29/29] preinstalling pam... [ 2s] [ 2s] running aaa_base preinstall script [ 2s] running aaa_base postinstall script [ 2s] Updating /etc/sysconfig/language... [ 2s] Updating /etc/sysconfig/backup... [ 2s] Updating /etc/sysconfig/proxy... [ 2s] Updating /etc/sysconfig/windowmanager... [ 2s] Updating /etc/sysconfig/news... [ 2s] Updating etc/passwd...unchanged [ 2s] Updating etc/group...unchanged [ 2s] Updating etc/shadow...new [ 2s] initializing rpm db... [ 2s] reordering...cycle: libcrack2 -> cracklib [ 2s] breaking dependency libcrack2 -> cracklib [ 2s] done [ 2s] [1/120] cumulate file-magic-5.19-3.1.2 [ 2s] [2/120] cumulate filesystem-13.2-4.3.1 [ 2s] [3/120] cumulate insserv-compat-0.1-12.2.2 [ 2s] [4/120] cumulate kernel-obs-build-3.16.6-2.1 [ 2s] [5/120] cumulate terminfo-base-5.9-52.2.3 [ 2s] [6/120] cumulate glibc-2.19-16.2.5 [ 2s] [7/120] cumulate fillup-1.42-271.1.2 [ 2s] [8/120] cumulate libatomic1-4.8.3+r212056-2.2.4 [ 2s] [9/120] cumulate libattr1-2.4.47-4.1.2 [ 2s] [10/120] cumulate libaudit1-2.4-1.3 [ 2s] [11/120] cumulate libbz2-1-1.0.6-29.2.7 [ 2s] [12/120] cumulate libcap-ng0-0.7.4-3.1.2 [ 2s] [13/120] cumulate libcap2-2.22-13.1.8 [ 2s] [14/120] cumulate libelf1-0.158-4.2.6 [ 2s] [15/120] cumulate libgcc_s1-4.8.3+r212056-2.2.4 [ 2s] [16/120] cumulate libgdbm4-1.11-3.1.2 [ 2s] [17/120] cumulate libgmp10-5.1.3-3.1.2 [ 2s] [18/120] cumulate libgomp1-4.8.3+r212056-2.2.4 [ 2s] [19/120] cumulate libitm1-4.8.3+r212056-2.2.4 [ 2s] [20/120] cumulate liblua5_1-5.1.5-10.2.2 [ 2s] [21/120] cumulate liblzma5-5.0.7-1.1 [ 2s] [22/120] cumulate libpcre1-8.35-3.2.3 [ 2s] [23/120] cumulate libpopt0-1.16-27.1.2 [ 2s] [24/120] cumulate libsepol1-2.3-2.1.8 [ 2s] [25/120] cumulate libsmartcols1-2.25.1-2.4 [ 2s] [26/120] cumulate libustr-1_0-1-1.0.4-33.1.2 [ 2s] [27/120] cumulate libuuid1-2.25.1-2.4 [ 2s] [28/120] cumulate libz1-1.2.8-5.1.2 [ 2s] [29/120] cumulate net-tools-1.60-765.1.2 [ 2s] [30/120] cumulate patch-2.7.1-7.1.2 [ 2s] [31/120] cumulate perl-base-5.20.1-1.3 [ 2s] [32/120] cumulate update-alternatives-1.16.10-8.1.2 [ 3s] [33/120] cumulate brp-extract-appdata-2012.02.13-22.1.2 [ 3s] [34/120] cumulate build-mkbaselibs-20140424-2.1.3 [ 3s] [35/120] cumulate attr-2.4.47-4.1.2 [ 3s] [36/120] cumulate libacl1-2.2.52-5.1.2 [ 3s] [37/120] cumulate libasan0-4.8.3+r212056-2.2.4 [ 3s] [38/120] cumulate libblkid1-2.25.1-2.4 [ 3s] [39/120] cumulate libisl10-0.12.2-2.1.2 [ 3s] [40/120] cumulate libmpfr4-3.1.2-5.1.2 [ 3s] [41/120] cumulate libopenssl1_0_0-1.0.1i-2.1.4 [ 3s] [42/120] cumulate libselinux1-2.3-2.2.5 [ 3s] [43/120] cumulate libstdc++6-4.8.3+r212056-2.2.4 [ 3s] [44/120] cumulate libmagic1-5.19-3.1.2 [ 3s] [45/120] cumulate libzio1-1.00-10.1.2 [ 3s] [46/120] cumulate file-5.19-3.1.2 [ 3s] [47/120] cumulate libcloog-isl4-0.18.1-2.1.2 [ 3s] [48/120] cumulate libdb-4_8-4.8.30-29.1.2 [ 3s] [49/120] cumulate libmount1-2.25.1-2.4 [ 3s] [50/120] cumulate libmpc3-1.0.2-2.1.2 [ 3s] [51/120] cumulate libncurses5-5.9-52.2.3 [ 3s] [52/120] cumulate libncurses6-5.9-52.2.3 [ 3s] [53/120] cumulate libsemanage1-2.3-2.1.8 [ 3s] [54/120] cumulate libreadline6-6.2-75.3.1 [ 3s] [55/120] cumulate perl-5.20.1-1.3 [ 3s] [56/120] cumulate cpp48-4.8.3+r212056-2.2.4 [ 3s] [57/120] cumulate brp-check-suse-13.2+git20140727.d76b99d-3.2.1 [ 3s] [58/120] cumulate perl-Devel-Symdump-2.11-2.1.3 [ 3s] [59/120] cumulate perl-Encode-Locale-1.03-8.1.3 [ 3s] [60/120] cumulate perl-HTML-Tagset-3.20-72.1.3 [ 3s] [61/120] cumulate perl-HTTP-Date-6.02-8.1.3 [ 3s] [62/120] cumulate perl-IO-HTML-1.00-4.1.3 [ 3s] [63/120] cumulate perl-LWP-MediaTypes-6.02-8.1.3 [ 3s] [64/120] cumulate perl-URI-1.60-8.1.3 [ 3s] [65/120] cumulate perl-Test-Pod-1.48-4.1.3 [ 3s] [66/120] cumulate bash-4.2-75.3.1 [ 3s] [67/120] cumulate build-compare-2014.07.15-4.1.5 [ 3s] [68/120] cumulate cpp-4.8-7.1.2 [ 3s] [69/120] cumulate perl-File-Listing-6.04-8.1.3 [ 3s] [70/120] cumulate perl-Net-HTTP-6.07-1.2 [ 3s] [71/120] cumulate perl-WWW-RobotRules-6.02-8.1.3 [ 3s] [72/120] cumulate bzip2-1.0.6-29.2.7 [ 3s] [73/120] cumulate perl-Pod-Coverage-0.23-4.1.3 [ 3s] [74/120] cumulate xz-5.0.7-1.1 [ 3s] [75/120] cumulate openssl-1.0.1i-2.1.4 [ 3s] [76/120] cumulate perl-HTML-Parser-3.71-2.1.3 [ 3s] [77/120] cumulate info-4.13a-38.1.2 [ 3s] [78/120] cumulate perl-HTTP-Message-6.06-4.1.3 [ 3s] [79/120] cumulate perl-HTTP-Negotiate-6.01-8.1.3 [ 3s] [80/120] cumulate perl-Test-Pod-Coverage-1.10-2.1.3 [ 3s] [81/120] cumulate cpio-2.11-29.2.3 [ 3s] [82/120] cumulate diffutils-3.3-6.1.2 [ 3s] [83/120] cumulate gzip-1.6-8.1.8 [ 3s] [84/120] cumulate m4-1.4.17-2.1.2 [ 3s] [85/120] cumulate make-4.0-2.2.3 [ 3s] [86/120] cumulate perl-HTTP-Cookies-6.01-8.1.3 [ 3s] [87/120] cumulate sed-4.2.2-5.1.2 [ 3s] [88/120] cumulate tar-1.28-2.2.2 [ 3s] [89/120] cumulate which-2.20-4.1.2 [ 3s] [90/120] cumulate findutils-4.5.14-2.1.2 [ 3s] [91/120] cumulate gawk-4.1.1-3.1.2 [ 3s] [92/120] cumulate gettext-runtime-mini-0.19.2-2.1.3 [ 3s] [93/120] cumulate grep-2.20-2.1.2 [ 3s] [94/120] cumulate perl-HTTP-Daemon-6.01-8.1.3 [ 3s] [95/120] cumulate binutils-2.24-6.1.7 [ 3s] [96/120] cumulate coreutils-8.23-2.3.1 [ 3s] [97/120] cumulate linux-glibc-devel-3.16-2.1.7 [ 3s] [98/120] cumulate systemd-rpm-macros-2-8.1.2 [ 3s] [99/120] cumulate glibc-locale-2.19-16.2.5 [ 3s] [100/120] cumulate gettext-tools-mini-0.19.2-2.1.3 [ 3s] [101/120] cumulate permissions-2014.08.26.1452-1.2 [ 3s] [102/120] cumulate perl-libwww-perl-6.05-4.1.3 [ 3s] [103/120] cumulate rpm-4.11.3-1.2 [ 3s] [104/120] cumulate glibc-devel-2.19-16.2.5 [ 3s] [105/120] cumulate libutempter0-1.1.6-5.2.3 [ 3s] [106/120] cumulate rpmlint-mini-1.5-8.1.9 [ 3s] [107/120] cumulate rpmlint-Factory-1.0-88.1.2 [ 3s] [108/120] cumulate zlib-devel-1.2.8-5.1.2 [ 3s] [109/120] cumulate gcc48-4.8.3+r212056-2.2.4 [ 3s] [110/120] cumulate gcc-4.8-7.1.2 [ 3s] [111/120] cumulate libopenssl-devel-1.0.1i-2.1.4 [ 3s] [112/120] cumulate libcrack2-2.9.0-4.1.3 [ 3s] [113/120] cumulate cracklib-2.9.0-4.1.3 [ 3s] [114/120] cumulate pam-1.1.8-11.1.2 [ 3s] [115/120] cumulate pam-modules-12.1-24.1.2 [ 3s] [116/120] cumulate util-linux-2.25.1-2.4 [ 3s] [117/120] cumulate aaa_base-13.2+git20140911.61c1681-1.3 [ 3s] [118/120] cumulate rpm-build-4.11.3-1.2 [ 3s] [119/120] cumulate aaa_base-malloccheck-13.2+git20140911.61c1681-1.3 [ 3s] [120/120] cumulate post-build-checks-13.2+git20140318.f24deaf-2.1.2 [ 3s] now installing cumulated packages [ 4s] Preparing... ######################################## [ 4s] Updating / installing... [ 4s] terminfo-base-5.9-52.2.3 ######################################## [ 4s] filesystem-13.2-4.3.1 ######################################## [ 4s] glibc-2.19-16.2.5 ######################################## [ 5s] libz1-1.2.8-5.1.2 ######################################## [ 5s] perl-base-5.20.1-1.3 ######################################## [ 5s] libgmp10-5.1.3-3.1.2 ######################################## [ 6s] libbz2-1-1.0.6-29.2.7 ######################################## [ 6s] libgcc_s1-4.8.3+r212056-2.2.4 ######################################## [ 7s] libstdc++6-4.8.3+r212056-2.2.4 ######################################## [ 7s] libncurses5-5.9-52.2.3 ######################################## [ 8s] fillup-1.42-271.1.2 ######################################## [ 8s] libisl10-0.12.2-2.1.2 ######################################## [ 8s] libmpfr4-3.1.2-5.1.2 ######################################## [ 9s] libattr1-2.4.47-4.1.2 ######################################## [ 9s] libaudit1-2.4-1.3 ######################################## [ 9s] libcap2-2.22-13.1.8 ######################################## [ 10s] liblzma5-5.0.7-1.1 ######################################## [ 10s] libacl1-2.2.52-5.1.2 ######################################## [ 11s] libmpc3-1.0.2-2.1.2 ######################################## [ 11s] libcloog-isl4-0.18.1-2.1.2 ######################################## [ 12s] cpp48-4.8.3+r212056-2.2.4 ######################################## [ 12s] libopenssl1_0_0-1.0.1i-2.1.4 ######################################## [ 13s] libgomp1-4.8.3+r212056-2.2.4 ######################################## [ 13s] libpcre1-8.35-3.2.3 ######################################## [ 14s] libselinux1-2.3-2.2.5 ######################################## [ 14s] libpopt0-1.16-27.1.2 ######################################## [ 15s] libuuid1-2.25.1-2.4 ######################################## [ 15s] libblkid1-2.25.1-2.4 ######################################## [ 16s] update-alternatives-1.16.10-8.1.2 ######################################## [ 16s] libmount1-2.25.1-2.4 ######################################## [ 16s] libzio1-1.00-10.1.2 ######################################## [ 16s] libreadline6-6.2-75.3.1 ######################################## [ 17s] bash-4.2-75.3.1 ######################################## [ 17s] info-4.13a-38.1.2 ######################################## [ 18s] coreutils-8.23-2.3.1 ######################################## [ 18s] diffutils-3.3-6.1.2 ######################################## [ 19s] grep-2.20-2.1.2 ######################################## [ 19s] permissions-2014.08.26.1452-1.2 ######################################## [ 20s] Updating /etc/sysconfig/security... [ 20s] Warning: running kernel does not support fscaps [ 20s] Checking permissions and ownerships - using the permissions files [ 20s] /etc/permissions [ 20s] /etc/permissions.easy [ 20s] /etc/permissions.local [ 20s] setting /dev/full to root:root 0666. (wrong permissions 0622) [ 20s] setting /sbin/unix_chkpwd to root:shadow 4755. (wrong owner/group root:root) [ 20s] sed-4.2.2-5.1.2 ######################################## [ 20s] cpio-2.11-29.2.3 ######################################## [ 22s] findutils-4.5.14-2.1.2 ######################################## [ 23s] gawk-4.1.1-3.1.2 ######################################## [ 24s] update-alternatives: using /usr/bin/gawk to provide /bin/awk (awk) in auto mode [ 25s] binutils-2.24-6.1.7 ######################################## [ 25s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode [ 25s] libutempter0-1.1.6-5.2.3 ######################################## [ 26s] Warning: running kernel does not support fscaps [ 26s] linux-glibc-devel-3.16-2.1.7 ######################################## [ 27s] glibc-devel-2.19-16.2.5 ######################################## [ 27s] zlib-devel-1.2.8-5.1.2 ######################################## [ 27s] systemd-rpm-macros-2-8.1.2 ######################################## [ 29s] glibc-locale-2.19-16.2.5 ######################################## [ 30s] gzip-1.6-8.1.8 ######################################## [ 31s] make-4.0-2.2.3 ######################################## [ 31s] tar-1.28-2.2.2 ######################################## [ 32s] which-2.20-4.1.2 ######################################## [ 32s] gettext-runtime-mini-0.19.2-2.1.3 ######################################## [ 33s] gettext-tools-mini-0.19.2-2.1.3 ######################################## [ 34s] cpp-4.8-7.1.2 ######################################## [ 35s] bzip2-1.0.6-29.2.7 ######################################## [ 35s] xz-5.0.7-1.1 ######################################## [ 35s] openssl-1.0.1i-2.1.4 ######################################## [ 35s] libcrack2-2.9.0-4.1.3 ######################################## [ 36s] cracklib-2.9.0-4.1.3 ######################################## [ 36s] pam-1.1.8-11.1.2 ######################################## [ 36s] Warning: running kernel does not support fscaps [ 37s] libdb-4_8-4.8.30-29.1.2 ######################################## [ 37s] libncurses6-5.9-52.2.3 ######################################## [ 38s] libasan0-4.8.3+r212056-2.2.4 ######################################## [ 38s] libatomic1-4.8.3+r212056-2.2.4 ######################################## [ 38s] libcap-ng0-0.7.4-3.1.2 ######################################## [ 39s] libelf1-0.158-4.2.6 ######################################## [ 39s] libgdbm4-1.11-3.1.2 ######################################## [ 41s] perl-5.20.1-1.3 ######################################## [ 41s] perl-HTTP-Date-6.02-8.1.3 ######################################## [ 41s] perl-URI-1.60-8.1.3 ######################################## [ 41s] perl-LWP-MediaTypes-6.02-8.1.3 ######################################## [ 41s] perl-Encode-Locale-1.03-8.1.3 ######################################## [ 41s] perl-Net-HTTP-6.07-1.2 ######################################## [ 41s] perl-WWW-RobotRules-6.02-8.1.3 ######################################## [ 41s] perl-File-Listing-6.04-8.1.3 ######################################## [ 41s] perl-Devel-Symdump-2.11-2.1.3 ######################################## [ 41s] perl-Pod-Coverage-0.23-4.1.3 ######################################## [ 41s] perl-HTML-Tagset-3.20-72.1.3 ######################################## [ 41s] perl-HTML-Parser-3.71-2.1.3 ######################################## [ 41s] perl-IO-HTML-1.00-4.1.3 ######################################## [ 41s] perl-HTTP-Message-6.06-4.1.3 ######################################## [ 41s] perl-HTTP-Negotiate-6.01-8.1.3 ######################################## [ 41s] perl-HTTP-Cookies-6.01-8.1.3 ######################################## [ 42s] perl-HTTP-Daemon-6.01-8.1.3 ######################################## [ 42s] libitm1-4.8.3+r212056-2.2.4 ######################################## [ 43s] gcc48-4.8.3+r212056-2.2.4 ######################################## [ 43s] gcc-4.8-7.1.2 ######################################## [ 43s] liblua5_1-5.1.5-10.2.2 ######################################## [ 43s] libsepol1-2.3-2.1.8 ######################################## [ 44s] libsmartcols1-2.25.1-2.4 ######################################## [ 45s] libustr-1_0-1-1.0.4-33.1.2 ######################################## [ 45s] libsemanage1-2.3-2.1.8 ######################################## [ 46s] net-tools-1.60-765.1.2 ######################################## [ 46s] patch-2.7.1-7.1.2 ######################################## [ 46s] insserv-compat-0.1-12.2.2 ######################################## [ 46s] util-linux-2.25.1-2.4 ######################################## [ 47s] Warning: running kernel does not support fscaps [ 47s] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) [ 47s] setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) [ 47s] Warning: running kernel does not support fscaps [ 48s] aaa_base-13.2+git20140911.61c1681-1.3 ######################################## [ 48s] Updating /etc/sysconfig/language... [ 48s] Updating /etc/sysconfig/backup... [ 48s] Updating /etc/sysconfig/proxy... [ 48s] Updating /etc/sysconfig/windowmanager... [ 48s] Updating /etc/sysconfig/news... [ 48s] Updating etc/passwd...unchanged [ 48s] Updating etc/group...unchanged [ 48s] Updating etc/shadow...unchanged [ 48s] aaa_base-malloccheck-13.2+git20140911.######################################## [ 48s] file-magic-5.19-3.1.2 ######################################## [ 48s] libmagic1-5.19-3.1.2 ######################################## [ 49s] rpm-4.11.3-1.2 ######################################## [ 50s] Updating /etc/sysconfig/services... [ 50s] rpmlint-mini-1.5-8.1.9 ######################################## [ 50s] file-5.19-3.1.2 ######################################## [ 50s] rpm-build-4.11.3-1.2 ######################################## [ 50s] rpmlint-Factory-1.0-88.1.2 ######################################## [ 50s] post-build-checks-13.2+git20140318.f24######################################## [ 51s] perl-libwww-perl-6.05-4.1.3 ######################################## [ 51s] perl-Test-Pod-Coverage-1.10-2.1.3 ######################################## [ 51s] brp-check-suse-13.2+git20140727.d76b99######################################## [ 51s] perl-Test-Pod-1.48-4.1.3 ######################################## [ 51s] pam-modules-12.1-24.1.2 ######################################## [ 51s] Warning: running kernel does not support fscaps [ 51s] libopenssl-devel-1.0.1i-2.1.4 ######################################## [ 51s] m4-1.4.17-2.1.2 ######################################## [ 52s] build-compare-2014.07.15-4.1.5 ######################################## [ 52s] attr-2.4.47-4.1.2 ######################################## [ 52s] brp-extract-appdata-2012.02.13-22.1.2 ######################################## [ 52s] build-mkbaselibs-20140424-2.1.3 ######################################## [ 54s] kernel-obs-build-3.16.6-2.1 ######################################## [ 54s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 54s] now finalizing build dir... [ 54s] Running build time source services... [ 54s] Warning: spec file parser line 20: can't expand %(...) [ 54s] ----------------------------------------------------------------- [ 54s] I have the following modifications for perl-Crypt-SSLeay.spec: [ 54s] 4c4 [ 54s] < Release: 10.3 [ 54s] --- [ 54s] > Release: 3.2 [ 54s] ----------------------------------------------------------------- [ 54s] ----- building perl-Crypt-SSLeay.spec (user abuild) [ 54s] ----------------------------------------------------------------- [ 54s] ----------------------------------------------------------------- [ 54s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Devbase:Tools/openSUSE_13.2/4e2a26125e054511fb2260815c33ccee-crypt-ssleay' -ba /home/abuild/rpmbuild/SOURCES/perl-Crypt-SSLeay.spec [ 54s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ZWpVMc [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + rm -rf Crypt-SSLeay-0.64 [ 54s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Crypt-SSLeay_0.64.tar.gz [ 54s] + /bin/tar -xf - [ 54s] + STATUS=0 [ 54s] + '[' 0 -ne 0 ']' [ 54s] + cd Crypt-SSLeay-0.64 [ 54s] + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 54s] + perl -pi -e 's/\r$//' README [ 54s] Can't open README: No such file or directory. [ 54s] + exit 0 [ 54s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.K9Xa2f [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 [ 54s] ++ dirname /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 [ 54s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT [ 54s] + /usr/bin/mkdir /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 [ 54s] + cd Crypt-SSLeay-0.64 [ 54s] + pkg-config openssl [ 54s] /var/tmp/rpm-tmp.K9Xa2f: line 32: pkg-config: command not found [ 54s] + /usr/bin/perl Makefile.PL --default --no-live-tests INC= LDFLAGS= INSTALLDIRS=vendor 'OPTIMIZE=-fomit-frame-pointer -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g' [ 54s] Unknown option: default [ 54s] The test suite can attempt to connect to public servers to ensure that the [ 54s] code is working properly. If you are behind a strict firewall or have no [ 54s] network connectivity, these tests may fail (through no fault of the code). [ 54s] Do you want to run the live tests (y/N)? [N] N [ 54s] Warning: prerequisite LWP::Protocol::https 6.02 not found. [ 54s] Warning: prerequisite Try::Tiny 0.09 not found. [ 54s] Checking if your kit is complete... [ 54s] Looks good [ 54s] Warning (mostly harmless): No library found for -lssl32 [ 54s] Warning (mostly harmless): No library found for -lssleay32 [ 54s] Warning (mostly harmless): No library found for -leay32 [ 55s] Generating a Unix-style Makefile [ 55s] Writing Makefile for Crypt::SSLeay [ 55s] Writing MYMETA.yml and MYMETA.json [ 55s] + make -j4 [ 55s] Running Mkbootstrap for Crypt::SSLeay () [ 55s] /usr/bin/perl /usr/lib/perl5/5.20.1/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.20.1/ExtUtils/typemap -typemap typemap SSLeay.xs > SSLeay.xsc && mv SSLeay.xsc SSLeay.c [ 55s] chmod 644 SSLeay.bs [ 55s] cp lib/Crypt/SSLeay/MainContext.pm blib/lib/Crypt/SSLeay/MainContext.pm [ 55s] cp lib/Net/SSL.pm blib/lib/Net/SSL.pm [ 55s] cp lib/Crypt/SSLeay/Err.pm blib/lib/Crypt/SSLeay/Err.pm [ 55s] cp lib/Crypt/SSLeay/CTX.pm blib/lib/Crypt/SSLeay/CTX.pm [ 55s] cp lib/Crypt/SSLeay/X509.pm blib/lib/Crypt/SSLeay/X509.pm [ 55s] cp SSLeay.pm blib/lib/Crypt/SSLeay.pm [ 55s] cp lib/Crypt/SSLeay/Conn.pm blib/lib/Crypt/SSLeay/Conn.pm [ 55s] cc -c -D_REENTRANT -D_GNU_SOURCE -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -fomit-frame-pointer -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -DVERSION=\"0.64\" -DXS_VERSION=\"0.64\" -fPIC "-I/usr/lib/perl5/5.20.1/i586-linux-thread-multi/CORE" SSLeay.c [ 55s] SSLeay.c: In function 'XS_Crypt__SSLeay__CTX_new': [ 55s] SSLeay.c:273:6: warning: unused variable 'packname' [-Wunused-variable] [ 55s] SV* packname = ST(0) [ 55s] ^ [ 55s] SSLeay.c: In function 'XS_Crypt__SSLeay__Conn_new': [ 55s] SSLeay.c:571:6: warning: unused variable 'packname' [-Wunused-variable] [ 55s] SV* packname = ST(0) [ 55s] ^ [ 55s] In file included from /usr/lib/perl5/5.20.1/i586-linux-thread-multi/CORE/perl.h:5089:0, [ 55s] from SSLeay.xs:36: [ 55s] SSLeay.c: In function 'XS_Crypt__SSLeay__CTX_use_pkcs12_file': [ 55s] /usr/lib/perl5/5.20.1/i586-linux-thread-multi/CORE/embed.h:628:37: warning: 'RETVAL' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 55s] #define sv_setiv(a,b) Perl_sv_setiv(aTHX_ a,b) [ 55s] ^ [ 55s] SSLeay.c:460:6: note: 'RETVAL' was declared here [ 55s] int RETVAL; [ 55s] ^ [ 55s] rm -f blib/arch/auto/Crypt/SSLeay/SSLeay.so [ 55s] LD_RUN_PATH="/usr/lib" cc -shared -fomit-frame-pointer -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -Wall -pipe SSLeay.o -o blib/arch/auto/Crypt/SSLeay/SSLeay.so \ [ 55s] -lz -lssl -lcrypto \ [ 55s] [ 55s] chmod 755 blib/arch/auto/Crypt/SSLeay/SSLeay.so [ 55s] /usr/bin/perl -MExtUtils::Command::MM -e 'cp_nonempty' -- SSLeay.bs blib/arch/auto/Crypt/SSLeay/SSLeay.bs 644 [ 56s] Manifying blib/man3/Crypt::SSLeay.3pm [ 56s] Manifying blib/man3/Net::SSL.3pm [ 56s] + exit 0 [ 56s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.dqz31m [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd Crypt-SSLeay-0.64 [ 56s] + make pure_install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 [ 56s] Running Mkbootstrap for Crypt::SSLeay () [ 56s] chmod 644 SSLeay.bs [ 56s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Net/SSL.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Crypt/SSLeay.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Crypt/SSLeay/X509.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Crypt/SSLeay/Conn.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Crypt/SSLeay/CTX.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Crypt/SSLeay/MainContext.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Crypt/SSLeay/Err.pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/man/man3/Crypt::SSLeay.3pm [ 56s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/man/man3/Net::SSL.3pm [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 -type f -name .packlist -exec rm -f '{}' ';' [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 -type f -name '*.bs' -a -size 0 -exec rm -f '{}' ';' [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 -depth -type d -exec rmdir '{}' ';' [ 56s] + chmod -R u+w /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr [ 56s] + chmod -R 644 eg/lwp-ssl-test eg/net-ssl-test [ 56s] + chmod -R 644 certs/ca-bundle.crt certs/notacacert.pem certs/notacakeynopass.pem [ 56s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/Crypt-SSLeay-0.64 [ 56s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so [ 56s] cpio: glibc-2.19/csu: Cannot stat: No such file or directory [ 56s] cpio: glibc-2.19/debug: Cannot stat: No such file or directory [ 56s] cpio: glibc-2.19/debug/stack_chk_fail_local.c: Cannot stat: No such file or directory [ 56s] cpio: glibc-2.19/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 56s] cpio: glibc-2.19/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 56s] 93 blocks [ 56s] + /usr/lib/rpm/brp-compress [ 56s] + /usr/lib/rpm/brp-suse [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-05-permissions [ 56s] setting / to root:root 0755. (wrong owner/group abuild:abuild) [ 56s] setting /usr/ to root:root 0755. (wrong owner/group abuild:abuild) [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-15-strip-debug [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-25-symlink [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-30-desktop [ 56s] WARNING: '/usr/lib/rpm/brp-desktop.data/suse-screensavers.menu' does not exist [ 56s] WARNING: '/usr/lib/rpm/brp-desktop.data/preferences-gnome.menu' does not exist [ 56s] WARNING: '/usr/lib/rpm/brp-desktop.data/applications-kmenuedit.menu' does not exist [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-35-rpath [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-40-rootfs [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-45-tcl [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-50-check-python [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-55-boot-scripts [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-60-hook [ 56s] calling /usr/lib/rpm/brp-suse.d/brp-72-extract-appdata [ 56s] Processing files: perl-Crypt-SSLeay-0.64-3.2.i586 [ 56s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.WEhWoh [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd Crypt-SSLeay-0.64 [ 56s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/doc/packages/perl-Crypt-SSLeay [ 56s] + export DOCDIR [ 56s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/doc/packages/perl-Crypt-SSLeay [ 56s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/doc/packages/perl-Crypt-SSLeay [ 56s] + cp -pr eg/lwp-ssl-test eg/net-ssl-test /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/doc/packages/perl-Crypt-SSLeay [ 56s] + cp -pr certs/ca-bundle.crt certs/notacacert.pem certs/notacakeynopass.pem /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386/usr/share/doc/packages/perl-Crypt-SSLeay [ 56s] + exit 0 [ 56s] Provides: SSLeay.so perl(Crypt::SSLeay) = 0.64 perl(Crypt::SSLeay::CTX) perl(Crypt::SSLeay::Conn) perl(Crypt::SSLeay::Err) perl(Crypt::SSLeay::MainContext) perl(Crypt::SSLeay::X509) perl(Net::SSL) = 2.85 perl-Crypt-SSLeay = 0.64-3.2 perl-Crypt-SSLeay = 0.64-tizen20130308 perl-Crypt-SSLeay(x86-32) = 0.64-3.2 [ 56s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 56s] Processing files: perl-Crypt-SSLeay-debugsource-0.64-3.2.i586 [ 56s] Provides: perl-Crypt-SSLeay-debugsource = 0.64-3.2 perl-Crypt-SSLeay-debugsource(x86-32) = 0.64-3.2 [ 56s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 56s] Processing files: perl-Crypt-SSLeay-debuginfo-0.64-3.2.i586 [ 56s] Provides: debuginfo(build-id) = 9a9582d14926cd4565a92c1f04941b261b0fcd92 perl-Crypt-SSLeay-debuginfo = 0.64-3.2 perl-Crypt-SSLeay-debuginfo(x86-32) = 0.64-3.2 [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 [ 56s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Crypt-SSLeay-0.64-3.2.src.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/i586/perl-Crypt-SSLeay-0.64-3.2.i586.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/i586/perl-Crypt-SSLeay-debugsource-0.64-3.2.i586.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/i586/perl-Crypt-SSLeay-debuginfo-0.64-3.2.i586.rpm [ 57s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.CFH27V [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd Crypt-SSLeay-0.64 [ 57s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-3.2.i386 [ 57s] + exit 0 [ 57s] ... checking for files with abuild user/group [ 57s] ... running 00-check-install-rpms [ 57s] ... installing all built rpms [ 57s] Preparing packages... [ 57s] perl-Crypt-SSLeay-debugsource-0.64-3.2.i586 [ 57s] perl-Crypt-SSLeay-0.64-3.2.i586 [ 57s] perl-Crypt-SSLeay-debuginfo-0.64-3.2.i586 [ 57s] ... running 01-check-debuginfo [ 57s] ... testing for empty debuginfo packages [ 57s] ... running 02-check-gcc-output [ 57s] ... testing for serious compiler warnings [ 57s] (using /usr/lib/build/checks-data/check_gcc_output) [ 57s] (using /var/cache/build/root_2/.build.log) [ 57s] ... running 03-check-binary-kernel-log [ 57s] ... running 04-check-filelist [ 57s] ... checking filelist [ 57s] ... running 05-check-invalid-requires [ 57s] dependency check for perl-Crypt-SSLeay-debuginfo-0.64-3.2.i586.rpm: [ 58s] dependency check for perl-Crypt-SSLeay-debugsource-0.64-3.2.i586.rpm: [ 58s] ... running 06-check-installtest [ 58s] ... testing for pre/postinstall scripts that are not idempotent [ 58s] ... running 08-check-permissions [ 58s] ... testing for modified permissions [ 58s] ... running 09-check-packaged-twice [ 58s] ... running 10-check-lanana [ 58s] ... running 12-check-libtool-deps [ 58s] ... testing devel dependencies required by libtool .la files [ 58s] (can be skipped by "skip-check-libtool-deps" anywhere in spec) [ 58s] ... running 13-check-invalid-provides [ 58s] ... running 14-check-gconf-scriptlets [ 58s] ... testing GConf scriptlet presence [ 58s] ... running 72-translate-appdata [ 58s] ... running 99-check-remove-rpms [ 58s] ... removing all built rpms [ 58s] (order: reverse perl-Crypt-SSLeay-debuginfo perl-Crypt-SSLeay perl-Crypt-SSLeay-debugsource) [ 58s] [ 58s] RPMLINT report: [ 58s] =============== [ 66s] perl-Crypt-SSLeay.i586: W: useless-provides perl-Crypt-SSLeay [ 66s] This package provides 2 times the same capacity. It should only provide it [ 66s] once. [ 66s] [ 66s] perl-Crypt-SSLeay.i586: W: script-without-shebang /usr/lib/perl5/vendor_perl/5.20.1/i586-linux-thread-multi/Net/SSL.pm [ 66s] This text file has executable bits set or is located in a path dedicated for [ 66s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 66s] meant to be an executable script, add the shebang, otherwise remove the [ 66s] executable bits or move the file elsewhere. [ 66s] [ 66s] perl-Crypt-SSLeay.i586: W: pem-certificate /usr/share/doc/packages/perl-Crypt-SSLeay/notacacert.pem [ 66s] Shipping a PEM certificate is likely wrong. If used for the default [ 66s] configuration, this is insecure ( since the certificate is public ). If this [ 66s] is used for validation, ie a CA certificate store, then this must be kept up [ 66s] to date due to CA compromise. The only valid reason is for testing purpose, so [ 66s] ignore this warning if this is the case. [ 66s] [ 66s] perl-Crypt-SSLeay.i586: W: package-with-huge-docs 80% [ 66s] More than half the size of your package is documentation. Consider [ 66s] splitting it into a -doc subpackage. [ 66s] [ 66s] perl-Crypt-SSLeay.i586: W: no-dependency-on perl-base 5.20.1 [ 66s] perl-Crypt-SSLeay.i586: W: invalid-license GPL+ [ 66s] perl-Crypt-SSLeay.i586: W: invalid-license Artistic [ 66s] perl-Crypt-SSLeay.src: W: invalid-license GPL+ [ 66s] perl-Crypt-SSLeay.src: W: invalid-license Artistic [ 66s] The specified license string is not recognized. Please refer to [ 66s] http://license.opensuse.org/ for the list of known licences and their exact [ 66s] spelling. [ 66s] [ 66s] 2 packages and 0 specfiles checked; 0 errors, 9 warnings. [ 66s] [ 66s] ... creating baselibs [ 66s] [ 66s] obsnw14 finished "build perl-Crypt-SSLeay.spec" at Fri Oct 11 01:56:54 UTC 2019. [ 66s]